test report

FCC ID: K66FT-8900R

Test Report

Download: PDF
FCCID_249514

FCC ID: K66FT-8900M C E R T I F I C A T I O N of RECEIVER MODEL: FT-8900R FCC ID: K66FT-8900R to FEDERAL COMMUNICATIONS COMMISSION Part 15(B) (New) DATE OF REPORT: May 30, 2002 ON THE BEHALF OF THE APPLICANT: Vertex Standard Co., Ltd. AT THE REQUEST OF: P.O. UPS 5/21/2002 Vertex Standard USA Inc. 10900 Walker Street Cypress, CA 90630 Attention of: Mikio Maruya, Executive Vice President (800) 255-9237; FAX: (800) 477-9237 (714) 827-7600; FAX: -8100 m.maruya@vxstdusa.com SUPERVISED BY: Morton Flom, P. Eng. MFA p0250009, d0250071

FCC ID: K66FT-8900M TABLE OF CONTENTS RULE DESCRIPTION PAGE 2.948 Description of Measurement Facilities 1 15.109 Receiver Spurious Emissions (Radiated) 6 15.121(b) Scanning Receiver 12 MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 1 of 13. Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) TEST REPORT b) Laboratory: M. Flom Associates, Inc. (FCC: 31040/SIT) 3356 N. San Marcos Place, Suite 107 (Canada: IC 2044) Chandler, AZ 85225 c) Report Number: d0250071 d) Client: Vertex Standard USA Inc. 10900 Walker Street Cypress, CA 90630 e) Identification: FT-8900M FCC ID: K66FT-8900M Description: Scanning Receiver f) EUT Condition: Not required unless specified in individual tests. g) Report Date: May 30, 2002 EUT Received: April 24, 2002 h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: Morton Flom, P. Eng. n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 2 of 13. M. Flom Associates, Inc. is accredited by the American Association for Laboratory Association (A2LA) as shown in the scope below. "This laboratory is accredited by the American Association for Laboratory Accreditation (A2LA) and the results shown in this report have been determined in accordance with the laboratory's terms of accreditation unless stated otherwise in the report." Should this report contain any data for tests for which we are not accredited, or which have been undertaken by a subcontractor that is not A2LA accredited, such data would not covered by this laboratory's A2LA accreditation. MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 3 of 13. GENERAL INFORMATION Part 2.948: (a)(b) DESCRIPTION OF MEASUREMENT FACILITIES: FILE: 31040/SIT A description of the measurement facilities was filed with the Commission and was found to be in compliance with the requirements of Section 2.948, by letter dated March 13, 2000. All pertinent changes will be reported to the Commission by up-date prior to March 2003. (b)(4) SUPPORTING STRUCTURES: SKETCH - ATTACHED EXHIBITS (b)(5)(6) TEST INSTRUMENTATION: LIST - SEE EXHIBITS 2.925: IDENTIFICATION OF AN AUTHORIZED DEVICE: DRAWING - SEE EXHIBITS LOCATION OF LABEL - SEE PHOTOS NAME AND ADDRESS OF APPLICANT: Vertex Standard Co., Ltd. 4-8-8 Nakameguro, Meguro-Ku Tokyo 153-8644 Japan MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 4 of 13. 2.911: 2.1033(b)(6) TECHNICAL REPORT MANUFACTURER: Vertex Standard Co., Ltd. 4-8-8 Nakameguro, Meguro-Ku Tokyo 153-8644 Japan FCC ID: K66FT-8900M MODEL NO: FT-8900M PHOTOGRAPHS: SEE LIST OF EXHIBITS DUT DESCRIPTION: This unit Passes 15.31: MEASUREMENT STANDARD & PROCEDURE: IEEE STANDARD 187 WAS USED AS A GUIDE. FCC MEASUREMENT PROCEDURE MP-1 x ANSI 63.4 (1992/2000) “Methods of measurement of radio-noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz.” MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 5 of 13. EXPOSITORY STATEMENT 1. NUMBER OF BANDS = 6 2. NUMBER OF CHANNELS = 18 3. TUNING RANGE, MHz = 20 to 39.0 40 to 90 100 to 190 300 to 400 400 to 520 700 to 1,000 4. OSCILLATOR RANGE, MHz = 65.05 to 84.05 85.05 to 113.125 145.05 to 235.05 345.05 to 445.045 354.95 to 474.4 654.95 to 949.09 5. I.F., MHz = 45.05 6. BLOCK DIAGRAM = ATTACHED 7. For cellular receiver only, the radio transceiver meets the requirements of FCC Bulletin OET 53 ("Cellular System Mobile Stations-Land-System Compatibility Specification."). See attached affidavit. 15.203: ANTENNA REQUIREMENT: The antenna is permanently attached to the EUT The antenna uses a unique coupling The EUT must be professionally installed x The antenna requirement does not apply SUPERVISED BY: Morton Flom, P. Eng. MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 6 of 13. NAME OF TEST: Receiver Spurious Emissions (Radiated) SPECIFICATION: 15.109: Radiated Interference Limits 15.33: Frequency Range of Radiated Measurements 80.217: Suppression of Interference Aboard Ships GUIDE: See measurement procedure below TEST CONDITIONS: Standard Temperature & Humidity TEST EQUIPMENT: As per attached page SEARCH ANTENNAS: 100 Hz - 50 MHz: Emco 3301B Active Rod 10 kHz - 32 MHz: Singer 94593-1 Loop 25 MHz - 300 MHz: Emco 3109 Biconical 200 MHz - 1 GHz: Aprel 2001 Log Periodic 1 GHz - 18 GHz: Emco 3115 Horn 10 GHz - 40 GHz: Emco 3116 Horn with HP11970A Mixer MEASUREMENT PROCEDURE 1. At first, bench tests were performed to locate the spurious emissions at the antenna terminals. 2. In the field, tests were conducted over the range shown, The test sample was set up on a wooden turntable above ground, and at a distance of three meters from the antenna connected tot he Spectrum Analyzer. 3. In order to obtain the maximum response at each frequency, the turntable was rotated, and the search antenna was raised and lowered. The EUT was also adjusted for maximum response. Tests were conducted in Horizontal & Vertical polarization modes. 4. The field strength was calculated from: E µV/m @ 3 m = Log10-1(dBµV + A.F. + C.L.) 20 5. MEASUREMENT RESULTS: Attached for "Worst Case" conditions. MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 7 of 13. RADIATED TEST SETUP NOTES: (a)Search Antenna - Rotatable on (j)Cables routed through hollow boom turntable center (b) Non-metallic boom (k)30 cm or less (c) Non-metallic mast (l)External power source (d) Adjustable horizontally (m)10 cm diameter coil of excess (e) Equipment Under Test cable (f) Turntable (n)25 cm (V), 1 m-7 m (V, H) (g) Boom adjustable in height. (o)25 cm from bottom end of 'V', (h) External control cables routed 1m normally horizontally at least one (p)Calibrated Cable at least 10m wavelength. in length (i) Rotatable (q)Amplifier (optional) (r)Spectrum Analyzer Asset Description s/n Cycle Last Cal (as applicable) Per ANSI C63.4-1992/2000 Draft, 10.1.4 TRANSDUCER i00088 EMCO 3109-B 25MHz-300MHz 2336 12 mo. Sep-01 i00089 Aprel 2001 200MHz-1GHz 001500 12 mo. Sep-01 i00103 EMCO 3115 1GHz-18GHz 9208-3925 12 mo. Sep-01 i00065 EMCO 3301-B Active Monopole 2635 12 mo. Sep-01 AMPLIFIER i00028 HP 8449A 2749A00121 12 mo. Mar-02 SPECTRUM ANALYZER i00029 HP 8563E 3213A00104 12 mo. Jan-02 i00033 HP 85462A 3625A00357 12 mo. Jan-02 i00048 HP 8566B 2511AD1467 6 mo. Jan-02 MISCELLANEOUS Microphone Antenna All Ports Terminated MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 9 of 13. NAME OF TEST: Receiver Spurious Emissions (Radiated) MEASUREMENT DETAILS SITE REFERENCE = 31040/SIT SPECTRUM SEARCHED = 0 to 10 x FR WORST CASE = V LIMITS = 15.109(a) (Attached) ALL OTHER EMISSIONS = 20 dB OR MORE BELOW LIMIT TESTS WERE CONDUCTED WITH: a. All controls and switches operated. b. Half-wave dipole antenna or manufacturer/applicant supplied antenna. SAMPLE CALCULATION: EMISSION FREQUENCY, MHz = 654.929300 LEVEL = Log10-1 (_7.8_+ 30.61 ) 20 LEVEL, µV/m @ 3m = 83.27 MEASUREMENT RESULTS = ATTACHED NOTE: WORST CASE OF SCAN AND NON-SCAN MODES REPORTED. MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 10 of 13. NAME OF TEST: Receiver Spurious Emissions (Radiated) RULE 15.109(a) LIMITS: FREQUENCY, MHz FIELD STRENGTH DISTANCE, m µV/m 30 - 88 100 3 88 - 216 150 3 216 - 960 200 3 Above 960 500 3 g0250003: 2002-May-21 Tue 13:27:00 FREQUENCY FREQUENCY LEVEL, @ m C.F., dB µV/m @ m TUNED, MHz EMISSION, MHz dBuV 20.000000 65.050000 13.27 3 13.4 21.55 3 29.050000 74.550000 17.64 3 11.79 29.61 3 39.000000 84.049900 11.35 3 11.6 14.04 3 20.000000 130.100000 5.16 3 16.7 12.39 3 29.500000 149.100000 8.96 3 17.28 20.51 3 39.000000 168.074900 13.21 3 17.73 35.24 3 g0250004: 2002-May-21 Tue 15:48:00 FREQUENCY FREQUENCY LEVEL, @ m C.F., dB µV/m @ m TUNED, MHz EMISSION, MHz dBuV 40.000000 85.050000 6.43 3 11.72 8.08 3 65.000000 110.047500 10.3 3 15.22 18.88 3 90.000000 113.137500 9.43 3 15.51 17.66 3 40.000000 170.100000 5.87 3 17.76 15.19 3 65.000000 220.100000 6.77 3 20.19 22.28 3 90.000000 226.100000 4.64 3 20.44 17.95 3 g0250005: 2002-May-22 Wed 10:33:00 FREQUENCY FREQUENCY LEVEL, @ m C.F., dB µV/m @ m TUNED, MHz EMISSION, MHz dBuV 100.000000 145.050000 11.08 3 17.14 25.76 3 145.000000 190.051300 15.9 3 18.79 54.26 3 190.000000 235.041300 7.5 3 20.81 26.03 3 100.000000 290.100000 4.24 3 30.34 53.58 3 145.000000 380.107500 12.23 3 25.33 75.51 3 190.000000 470.112200 8.59 3 26.39 56.1 3 All other emissions in the required measurement range were more that 20 dB below the required limits. PERFORMED BY: Doug Noble, B.A.S. E.E.T. MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 11 of 13. All other emissions in the required measurement range were more that 20 dB below the required limits. PLEASE NOTE: DATA SUPPLIED BY APPLICANT MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 12 of 13. NAME OF TEST: Scanning Receivers Cellular Band Rejection SPECIFICATION: FCC: 47 CFR 15.121(b) TEST EQUIPMENT: As per attached page GUIDE: 47 CFR 15.121(b): Except as provided in paragraph (c) of this section, scanning receivers shall reject any signals from Cellular Radiotelephone Service frequency bands that are 38 dB or higher based upon a 12 dB SINAD measurement, which is considered the threshold where a signal can be clearly discerned from any interference that may be present. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. MEASUREMENT PROCEDURE 1. Equipment was connected as illustrated in the block diagram. 2. A standard signal was applied to the receiver input terminals. 3. Receiver output audio output was adjusted for rated output and with distortion no greater than 10%. 4. The RF Signal generator was adjusted to produce 12dB SINAD without the audio output power dropping by more than 3dB. 5. This was repeated at three frequencies across all bands to establish a reference sensitivity level. The reference sensitivity taken was the lowest, or worst-case sensitivity for all of the bands. 6. The output of the signal generator was then adjusted to a level of +60dB above the reference level sensitivity established in step 5 and set to the first of three frequencies in the cellular subscriber transmit band. 7. Receiver squelch threshold, the signal level required to open the squelch, should be set to open no greater than +20dB above the reference sensitivity. 8. The receiver was then put in the scanning mode and allowed to scan across it’s complete receive range. 9. If the receiver unsquelched or stopped on any frequency, the displayed frequency was recorded. The signal generator was then adjusted in output level until a 12dB SINAD from the receiver was produced. The signal generator level associated with this response was also noted. 10. This procedure was repeated for three frequencies in the cellular base station transmit band. 11. The difference in between the signal generator output for any response recorded and the reference sensitivity is the rejection ratio. MFA p0250009, d0250071

FCC ID: K66FT-8900M PAGE NO. 13 of 13. SCANNING RECEIVER: Distortion Meter RF Signal Scanning SINAD Generator Receiver Meter Audio Power Meter System Sensitivity measured in step 5 = 130 dBm Frequency, MHz Image Frequency, Level for 12 dB Rejection, dB MHz SINAD, dBm 20–39 848.97 -109 <-130 836.4 824.04 40-90 848.97 -109 <-130 836.4 824.04 100–190 848.97 -109 <-130 836.4 824.04 300-399.995 848.97 -109 <-130 836.4 824.04 400-520 848.97 -109 <-130 836.4 824.04 700-999.99 848.97 -109 <-130 836.4 824.04 PERFORMED BY: Doug Noble, B.A.S. E.E.T. END OF TEST REPORT MFA p0250009, d0250071

FCC ID: K66FT-8900M THE APPLICANT HAS BEEN CAUTIONED AS TO THE FOLLOWING: 15.21 INFORMATION TO USER. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) SPECIAL ACCESSORIES. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. MFA p0250009, d0250071

FCC ID: K66FT-8900M LABELLING OF SCANNING RECEIVERS ' Scanning receivers shall have a label permanently affixed to the product, and this label shall be readily visible to the purchaser at the time of purchase. The label shall read as follows: WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. "Permanently affixed" means that the label is etched, engrave, stamped, silkscreened, indelibly printed or otherwise permanently marked on a permanently attached part of the equipment or on a nameplate of metal plastic or other material fastened to the equipment by welding, riveting, or permanent adhesive. The label shall be designed to last the expected lifetime of the equipment in the environment in which the equipment may be operated and must not be readily detachable. The label shall not be a stick-on, paper label. MFA p0250009, d0250071

FCC ID: K66FT-8900M STATEMENT OF COMPLIANCE THIS IS TO CERTIFY: THAT, ON THE BASIS OF THE MEASUREMENTS MADE, THE EQUIPMENT TESTED IS CAPABLE OF COMPLYING WITH THE REQUIREMENTS OF FCC RULE PART 15, SUBPART B x_ FCC RULE PART 15, SUBPART C ___ USING ANSI C63.4-1992/2000 Draft IN EFFECT AS OF THIS DATE, UNDER NORMAL OPERATION, WITH THE USUAL MAINTENANCE. THAT THE DATA CONTAINED HEREIN IS A SUMMARY (WORST CASE) OF THAT OBTAINED ON SEVERAL RANDOMLY-SELECTED PRODUCTION SAMPLES. THAT THE EQUIPMENT MEETS OR EXCEEDS THE REQUIREMENTS OF PART 15. MFA p0250009, d0250071

FCC ID: K66FT-8900M LIST OF EXHIBITS (FCC CERTIFICATION (RECEIVERS) - REVISED 9/28/98) APPLICANT: Vertex Standard Co., Ltd. EQUIPMENT: FT-8900M K66FT-8900M BY APPLICANT: IF APPLICABLE: Subsection 2.1033 1. LETTER OF AUTHORIZATION x 2. ATTESTATION x 3. IDENTIFICATION LABEL DRAWING x LABEL x LOCATION OF LABEL x COMPLIANCE STATEMENT x LOCATION OF COMPLIANCE STATEMENT 4. DOCUMENTATION: 2.1033(b) (3) USER MANUAL x (4) OPERATIONAL DESCRIPTION x (5) BLOCK DIAGRAM x (5) SCHEMATIC DIAGRAM x (7) PHOTOGRAPHS x BY M.F.A. INC. A. STATEMENT OF COMPLIANCE B. STATEMENT OF QUALIFICATIONS MFA p0250009, d0250071


Document Created: 2002-06-13 11:39:06
Document Modified: 2002-06-13 11:39:06
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC