Part 15B Test Report

FCC ID: JOYIUD19AB

Test Report

Download: PDF
FCCID_706036

Test report No. : 26KE0199-HO-D-1 Page : 1 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB EMI TEST REPORT Test Report No.: 26KE0199-HO-D-1 Applicant : KYOCERA Corporation Type of Equipment : iBurst User Terminal Model No. / FCC ID : UTD1900D-US-B / JOYIUD19AB UTU1900D-US-A / JOYIUU19AB UTC1900D-US-B / JOYIUC19AB Test standard : FCC Part 15 Subpart B Class B 2006 Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Apex Co., Ltd. 2. The results in this report apply only to the sample tested. 3. This equipment is in compliance with the above regulation. 4. The test results in this report are traceable to the national or international standards. 5. This test report must not be used by the client product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Date of test: July 31 to August 18, 2006 ______________________________ Tested by: ______________________________ Kenichi Adachi EMC Services Approved by : ______________________________ Naoki Sakamoto Group Leader of EMC Services This laboratory is accredited by the NVLAP LAB CODE 200572-0, U.S.A. The tests reported herein have been performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may NVLAP LAB CODE: 200572-0 refer to the WEB address, http://ulapex.jp/emc/nvlap.htm UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-D-1 Page : 2 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB CONTENTS PAGE SECTION 1: Client information............................................................................................. 3 SECTION 2: Equipment under test (E.U.T.) ........................................................................ 3 SECTION 3: Test specification, procedures & results ......................................................... 4 SECTION 4: Operation of E.U.T. during testing.................................................................. 6 SECTION 5: Conducted Emission ......................................................................................... 8 SECTION 6: Radiated Emission ............................................................................................ 9 APPENDIX 1: Photographs of test setup............................................................................. 10 Conducted Emission .................................................................................................................... 10 Radiated Emission ....................................................................................................................... 14 APPENDIX 2: Data of EMI test ........................................................................................... 18 Conducted Emission .................................................................................................................... 18 Radiated Emission ....................................................................................................................... 22 APPENDIX 3: Test instruments ........................................................................................... 26 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-D-1 Page : 3 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB SECTION 1: Client information Company Name : KYOCERA Corporation Address : Yokohama Office 2-1-1 Kagahara, Tsuzuki-ku, Yokohama-shi, Kanagawa 224-8502, Japan Telephone Number : +81-45-943-6189 Facsimile Number : +81-45-943-6123 Contact Person : Toshihiko Kawata SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : iBurst User Terminal Model No. : UTD1900D-US-B UTU1900D-US-A UTC1900D-US-B Serial No. : UTD1900D-US-B: 01 UTU1900D-US-A: 01 UTC1900D-US-B: 01 Rating : UTD1900D-US-B: AC 120V/60Hz (AC Adapter), DC 8.55-9.45V (EUT) UTU1900D-US-A: AC 120V/60Hz (Host PC’s AC Adapter) DC 4.5-5.5V(EUT) UTC1900D-US-B: AC 120V/60Hz (Host PC’s AC Adapter) DC 2.97-3.63V (EUT) Country of Manufacture : JAPAN Receipt Date of Sample : July 28, 2006 Condition of EUT : Production model Modification of EUT : No modification by the test lab. 2.2 Product Description Model Nos.: UTD1900D-US-B/UTU1900D-US-A/UTC1900D-US-B (referred to as the EUT in this report) are iBurst User Terminal. Equipment Type : Transceiver Frequency operation : 1900-1910MHz Type of modulation : BPSK,QPSK,8PSK,12QAM,16QAM Bandwidth : 500kHz Channel spacing : 625kHz Channel number : 16 Antenna Type : Integrated mono-pole antenna (UTD1900D-US-B) Chip antenna (UTU1900D-US-A, UTC1900D-US-B) Antenna connector Type : MMCX Antenna Gain : 4dBi (UTD1900D-US-B) 0dBi (UTU1900D-US-A, UTC1900D-US-B) Other Clock Frequency : 72MHz, 25MHz (UTD1900D-US-B only), 24MHz, 20MHz, 18MHz, 6MHz, 3MHz, 32.768kHz Temperature of operation : 0 deg. C. to + 40 deg. C. UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-D-1 Page : 4 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB SECTION 3: Test specification, procedures & results 3.1 Test specification Test Specification : FCC Part 15 Subpart B 2006 Title : FCC 47CFR Part15 Radio Frequency Device Subpart B Unintentional Radiators 3.2 Procedures and results Deviati Item Test Procedure Limits Worst margin *0) Result on [UTD1900D-US-B] 10.2dB, 24.13505MHz, AV, L ANSI C63.4: 2003 (USB) 7. AC powerline Conducted emission Class B N/A [UTU1900D-US-A] Complied conducted emission 15.8dB, 0.19870MHz, QP, L measurements [UTC1900D-US-B] 14.4dB, 0.20148MHz, QP, L [UTD1900D-US-B] 3.8dB, 566.960MHz, Vertical (LAN) ANSI C63.4: 2003 [UTU1900D-US-A] Radiated emission 8. Radiated Class B N/A 7.4dB, 54.290MHz, Complied emission measurements Vertical [UTC1900D-US-B] 8.2dB, 54.290MHz, Horizontal *Note: UL Apex’s EMI Work Procedure QPM05. *0) The result is rounded off to the second decimal place. Therefore, there may be 0.1 difference for the result. *These tests were performed without any deviations from test procedure except for additions or exclusions. 3.3 Additions or deviations to standards No addition, deviation, nor exclusion has been made from standards. 3.4 Confirmation UL Apex Co., Ltd. hereby confirms that E.U.T., in the configuration tested, complies with the specifications, FCC Part15 Subpart B 2006. UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-D-1 Page : 5 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB 3.5 Uncertainty Conducted Emission The measurement uncertainty (with a 95% confidence level) for this test was ±2.6dB. The data listed in this test report has enough margin, more than the site margin. Radiated Emission The measurement uncertainty (with a 95% confidence level) for this test using Loop antenna is ±4.41dB(3m). The measurement uncertainty (with a 95% confidence level) for this test using Biconical antenna is ±4.59dB(3m). The measurement uncertainty (with a 95% confidence level) for this test using Logperiodic antenna is ±4.62dB(3m). The measurement uncertainty (with a 95% confidence level) for this test using Horn antenna is ±5.27dB. [UTD1900D-US-B] The data listed in this report meets the limits unless the uncertainty is taken into consideration. [UTU1900D-US-A, UTC1900D-US-B] The data listed in this test report has enough margin, more than the site margin. 3.6 Test Location UL Apex Co., Ltd. Head Office EMC Lab. *NVLAP Lab. code: 200572-0 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile : +81 596 24 8124 FCC IC Registration Width x Depth x Size of Other Registration Number Height (m) reference ground plane (m) / rooms Number horizontal conducting plane No.1 semi-anechoic 313583 IC4247A 19.2 x 11.2 x 7.7m 7.0 x 6.0m Preparation chamber room No.2 semi-anechoic 655103 IC4247A-2 7.5 x 5.8 x 5.2m 4.0 x 4.0m - chamber No.3 semi-anechoic 148738 IC4247A-3 12.0 x 8.5 x 5.9m 6.8 x 5.75m chamber No.3 shielded room - - 4.0 x 6.0 x 2.7m N/A - No.4 semi-anechoic 134570 IC4247A-4 12.0 x 8.5 x 5.9m 6.8 x 5.75m - chamber No.4 shielded room - - 4.0 x 6.0 x 2.7m N/A - No.5 semi-anechoic - - 6.0 x 6.0 x 3.9m N/A - chamber No.6 shielded - - 4.0 x 4.5 x 2.7m 2.0 x 2.0 m - room No.6 measurement - - 4.75 x 5.4 x 3.0m 4.75 x 5.4 m - room No.7 shielded room - - 4.7 x 7.5 x 2.7m 4.7 x 7.5m - No.8 measurement - - 3.1 x 5.0 x 2.7m N/A - room * Size of vertical conducting plane (for Conducted Emission test) : 2.0 x 2.0m for No.1, No.2, No. 3, and No.4 semi-anechoic chambers and No.7 shielded room. 3.7 Test set up, Test instruments and Data of EMI Refer to APPENDIX 1 to 3. UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-D-1 Page : 6 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB SECTION 4: Operation of E.U.T. during testing 4.1 Operating modes The mode is used : Receiving mode 4.2 Configuration and peripherals [UTD1900D-US-B] (USB connect) (LAN connect) A: EUT 3 E 8 A: EUT 4 E G 8 G 4 3 1 1 5 5 F F D D 2 2 6 6 AC120V / 60Hz AC120V / 60Hz AC120V / 60Hz AC120V / 60Hz Standard Ferrite Core for E. [UTU1900D-US-A] [UTC1900D-US-B] 7 E E B: EUT 8 G C: EUT 8 G 1 1 F F 2 2 AC120V / 60Hz AC120V / 60Hz Standard Ferrite Core. Standard Ferrite Core for E. *Cabling and setup were taken into consideration and test data was taken under worse case conditions. UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-D-1 Page : 7 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB Description of EUT and support equipment No. Item Model number Serial number Manufacturer Remark A iBurst User Terminal UTD1900D-US-B 01 KYOCERA EUT B iBurst User Terminal UTU1900D-US-A 01 KYOCERA EUT C iBurst User Terminal UTC1900D-US-B 01 KYOCERA EUT D AC Adapter TYPEFW7400/09 2106B FWHK EUT E PC TYPE2662-LBJ FX-FL781 IBM - F AC Adapter for PC AA21131 11S02K6657Z1Z0ZA0651R IBM - X G Mouse M-U48a LNA12600205 Logitech - List of cables used No. Name Length (m) Shield Remarks Cable Connector 1 DC Cable 1.8 Unshielded Unshielded - 2 AC Cable 1.0 Unshielded Unshielded - 3 USB Cable 2.0 Shielded Shielded - 4 LAN Cable 2.0 Unshielded Unshielded - 5 DC Cable 2.0 Unshielded Unshielded - 6 AC Cable 2.0 Unshielded Unshielded - 7 USB Cable 1.0 Shielded Shielded - 8 Mouse Cable 1.9 Unshielded Unshielded - UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-D-1 Page : 8 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB SECTION 5: Conducted Emission 5.1 Operating environment Test place : No.2 / No.3 semi anechoic chamber. Temperature : See data Humidity : See data 5.2 Test configuration EUT was placed on a urethane platform / a wooden table of nominal size, 0.5m by 1.0 m (for UTD-1900D-US- B) / 1m by 1.5m (for UTU-1900D-US-A and UTC-1900D-US-B), raised 80cm above the conducting ground plane. The rear of tabletop was located 40cm to the vertical conducting plane. The rear of EUT and its peripherals was aligned and flushed with rear of tabletop. All other surfaces of tabletop were at least 80cm from any other grounded conducting surface. EUT was located 80cm from the LISN/AMN and excess AC cable was bundled in center. They were folded back and forth forming a bundle 30cm to 40cm long and were hanged at a 40cm height to the ground plane. Each EUT current-carrying power lead, except the ground (safety) lead, was individually connected through a LISN/AMN to the input power source. All unused 50 ohm connectors of the LISN/AMN were resistivity terminated in 50 ohm when not connected to the measuring equipment. A drawing of the set up is shown in the photos of APPENDIX 1. *EUT was located 80cm from LISN/AMN and excess AC cable was bundled in center. I/O cables that were connected to the other peripherals. 5.3 Test conditions Frequency range : 0.15 MHz-30MHz EUT position : Table top EUT operation mode : See Clause 4.1 5.4 Test procedure The AC Mains Terminal Continuous disturbance Voltage has been measured with the EUT within a semi anechoic chamber. The EUT was connected to a Line Impedance Stabilization Network (LISN)/ Artificial Mains network (AMN). An overview sweep with peak detection has been performed. The measurements have been performed with a quasi-peak detector and if required, with an average detector. The conducted emission measurements were made with the following detector function of the test receiver. Detector Type : Quasi-Peak and Average IF Bandwidth : 9 kHz 5.5 Test result Summary of the test results: Pass Date: July 31 and August 18, 2006 Test engineer: Kenichi Adachi UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-D-1 Page : 9 of 26 Issued date : August 30, 2006 Revised date : September 7, 2006 FCC ID : JOYIUD19AB/JOYIUU19AB/JOYIUC19AB SECTION 6: Radiated Emission 6.1 Operating environment Test place : No.2 semi anechoic chamber Temperature : See data Humidity : See data 6.2 Test configuration EUT was placed on a urethane platform of nominal size, 1.0m by 1.0m, raised 80cm above the conducting ground plane. The EUT was set on the center of the tabletop. Test was made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna was varied in height above the conducting ground plane to obtain the maximum signal strength. A drawing of the set up is shown in the photos of APPENDIX 1. 6.3 Test conditions Frequency range : 30MHz – 300MHz (Biconical antenna) / 300MHz – 1000MHz (Logperiodic antenna) Test distance : 3m EUT position : Table top EUT operation mode : See Clause 4.1 6.4 Test procedure The height of the measuring varied between 1 and 4m and EUT was rotated a full revolution in order to obtain the maximum value of the electric field intensity. The measurements were performed for both vertical and horizontal antenna polarization with the Test Receiver, or the Spectrum Analyzer (in linear mode). The test was made with the detector (RBW/VBW) in the following table. When using Spectrum analyzer, the test was made with adjusting span to zero by using peak hold. Frequency Below 1GHz Instrument used Test Receiver IF Bandwidth QP: BW 120kHz 6.5 Test result Summary of the test results: Pass Date: July 31, 2006 Test engineer: Kenichi Adachi UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)


Document Created: 2006-09-07 11:15:47
Document Modified: 2006-09-07 11:15:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC