J9CQGM8180X

Application Details:

Equipment	Module
FRN	0022707111
Grantee Code	J9C
Product Code	QGM8180X
Applicant Business	Qualcomm Technologies, Inc.
Business Address	5775 Morehouse Drive , San Diego,California United States 92121
TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email	[email protected]
Applicant	Paul Guckian – Vice President, Regulatory Engineering
Applicant Phone
Applicant Fax	858-651-1547
Applicant Email	[email protected]
Applicant MailStop
Test Firm	Sporton International Inc.
Test Firm Contact	Alex Chen
Test Firm Phone
Test Firm Fax	+886-3-327-0978
Test Firm Email	[email protected]
Certified By	Jones Tsai – Director

Comment [3xxGS2OcYHaUt34w23sPdA==]: Limited Single Modular Approval. The modular transmitter is limited to operating with the SDX24, SDM855, SM8150 and the SC8180X and not as standalone module. Power listed is conducted. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance.

---

Comment [P4oZIWrbW7jDkUt9XX2amw==]: Limited Single Modular Approval. The modular transmitter is limited to operating with the SDX24, SDM855, SM8150 and the SC8180X and not as standalone module. Power listed is EIRP. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the EIRP power limits as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 48.

---