Test Setup photos

FCC ID: J9CIEMHSDPA

Test Setup Photos

Download: PDF
FCCID_1522249

Photo Report GSM/UMTS transceiver IEM6270 Report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 2nd edition Test Laboratory: 7 layers AG DGA-PL-192/99-02 Borsigstrasse 11 40880 Ratingen Germany email: info@7Layers.de Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the testing laboratory. 7Layers AG Aufsichtsratsvorsitzenderh Registergerichth registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr h VAT No.: Phone: +49 (0) 2102 749 0 Vorstandh Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com InterLab® is a registered trademark of 7 layers AG

1 Photo Report 1.1 Photos of test setups Photo 1: Test setup for radiated measurements (Enclosure, 30 MHz to 1 GHz), computer peripheral setup (mounted to Test Board) Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 2 of 13

Photo 2: Test setup for radiated measurements (Enclosure, 30 MHz to 1 GHz), EUT stand-alone (mounted to Test Board) Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 3 of 13

Photo 3: Test setup for radiated measurements (Enclosure, above 1 GHz), EUT and antenna positions Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 4 of 13

Photo 4: Test setup for radiated measurements (Enclosure, above 1 GHz), detail of EUT setup on tilt device Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 5 of 13

Photo 5: Test setup for substitution measurement (below 1 GHz) Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 6 of 13

Photo 6: Test setup for substitution measurement (above 1 GHz) Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 7 of 13

Photo 7: Test setup for conducted measurements (AC Port (power line), powered by external power supply) Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 8 of 13

Photo 8: Test setup for conducted measurements (AC Port (power line), computer peripheral setup) Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 9 of 13

1.2 Photos of the EUT Internal photos of the EUT (e.g. without shielding) are not subject to this report. Please refer to documentation of the applicant. Photo 9: EUT mounted to Test Board Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 10 of 13

Photo 10: EUT mounted to Test Board, detailed view Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 11 of 13

Photo 11: EUT (top side, the photo does not show a tested sample) Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 12 of 13

Photo 12: EUT (bottom side, the photo does not show a tested sample) Test report Reference: ODE_MUS_QUALCOMM_1005_Photo_2 Page 13 of 13


Document Created: 2011-08-01 17:31:23
Document Modified: 2011-08-01 17:31:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC