SAICT_I18N00940_Spectralink_Versity_FCC_Report_DFS_REV2

FCC ID: IYG95XX

Test Report

Download: PDF
FCCID_4014770

FCC PART 15E & RSS 247 TEST REPORT No. I18N00940-DFS for Spectralink Corp GSM Quad-band/UMTS five-band/LTE/CA Mobile phone 9553 with Hardware Version: PIO Software Version: vF03 FCC ID: IYG95XX IC: 2128B-95XX Issued Date: 2018-09-10 Designation Number: CN1210 ISED Assigned Code: 23289 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of SAICT. Test Laboratory: Shenzhen Academy of Information and Communications Technology Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen, Guangdong, P. R. China 518026. Tel: +86(0)755-33322000, Fax: +86(0)755-33322001, Email:yewu@caict.ac.cn.www.cszit.com ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page2 of 16 REPORT HISTORY Report Number Revision Description Issue Date I18N00940-DFS Rev.0 1st edition 2018-09-10 ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page3 of 16 CONTENTS CONTENTS .................................................................................................................................................. 3 1. TEST LATORATORY.................................................................................................................. 4 1.1. TESTING LOCATION ......................................................................................................................... 4 1.2. TESTING ENVIRONMENT .................................................................................................................. 4 1.3. PROJECT DATA ................................................................................................................................. 4 1.4. SIGNATURE ...................................................................................................................................... 4 2. CLIENT INFORMATION ........................................................................................................... 5 2.1. APPLICANT INFORMATION ............................................................................................................... 5 2.2. MANUFACTURER INFORMATION ...................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT(AE) ...................... 6 3.1. ABOUT EUT .................................................................................................................................... 6 3.2. INTERNAL IDENTIFICATION OF EUT ................................................................................................ 6 3.3. INTERNAL IDENTIFICATION OF AE ................................................................................................... 6 3.4. GENERAL DESCRIPTION ................................................................................................................... 6 4. REFERENCE DOCUMENTS ..................................................................................................... 7 4.1. DOCUMENTS SUPPLIED BY APPLICANT ............................................................................................ 7 4.2. REFERENCE DOCUMENTS FOR TESTING ........................................................................................... 7 4.3. LABORATORY ENVIRONMENT .......................................................................................................... 7 5. SUMMARY OF TEST RESULTS ............................................................................................... 8 5.1. SUMMARY OF TEST RESULTS ........................................................................................................... 8 5.2. STATEMENTS .................................................................................................................................... 8 5.3. TERMS USED IN THE RESULT TABLE ................................................................................................. 8 6. TEST EQUIPMENTS UTILIZED .............................................................................................. 9 ANNEX A: MEASUREMENT RESULTS................................................................................................ 10 A.1. MEASUREMENT METHOD .................................................................................................................. 10 A.2. CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME .................................................11 A.3. NON-OCCUPANCY PERIOD ................................................................................................................. 14 A3.1 ASSOCIATED TEST ............................................................................................................................. 14 ANNEX B: PHOTOGRAPHS OF THE TEST SET-UP .......................................................................... 16 ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page4 of 16 1. TEST LATORATORY 1.1. Testing Location Location: Shenzhen Academy of Information and Communications Technology Address: Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen, Guangdong Province ,China Postal Code: 518026 Telephone: +86(0)755-33322000 Fax: +86(0)755-33322001 1.2. Testing Environment Normal Temperature: 15-30℃ Relative Humidity: 35-60% 1.3. Project data Testing Start Date: 2018-06-04 Testing End Date: 2018-07-10 1.4. Signature An Ran (Prepared this test report) Tang Weisheng (Reviewed this test report) Zhang Bojun (Approved this test report) ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page5 of 16 2. CLIENT INFORMATION 2.1. Applicant Information Company Name: Spectralink Corp Address: 2560 55th Street Boulder, CO 80301 USA Contact Person Andrew Duncan Telephone: Andrew.duncan@spectralink.com Fax: +1 720-925-0480 E-Mail / 2.2. Manufacturer Information Company Name: Spectralink Corp Address: 2560 55th Street Boulder, CO 80301 USA Contact Person Andrew Duncan Telephone: Andrew.duncan@spectralink.com Fax: +1 720-925-0480 E-Mail / ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page6 of 16 3. Equipment Under Test (EUT) and Ancillary Equipment(AE) 3.1. About EUT Description GSM Quad-band/UMTS five-band/LTE/CA Mobile phone Model name 9553 Market Name Versity RLAN Frequency Range ISM Bands: 5250MHz~5350MHz 5470MHz~5725MHz RLAN Protocol IEEE 802.11a,802.11n-HT20/40,802.11ac-VHT20/40/80 Type of modulation OFDM Antenna Integrated Antenna Gain 0.5dBi Power Supply 3.7V DC by Battery Device Type (DFS) Client without radar detection(only support client mode) FCC ID IYG95XX IC number 2128B-95XX Condition of EUT as received No abnormality in appearance Note: Components list, please refer to documents of the manufacturer 3.2. Internal Identification of EUT EUT ID* IMEI HW Version SW Version Receive Date EUT1 / PIO vF03 2018-05-14 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE AE ID* Description Mode Manufacturer AE1 Switching Adapter ASUC71w-050912300 Aquil Star Precision Industrial (ShenZhen) Co., Ltd *AE ID: is used to identify the test sample in the lab internally. 3.4. General Description The Equipment under Test (EUT) is a model of GSM Quad-band/UMTS five-band/LTE/CA Mobile phone with integrated antenna and battery. It consists of normal options: travel charger, USB cable and Phone. Manual and specifications of the EUT were provided to fulfil the test. Samples undergoing test were selected by the client. ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page7 of 16 4. REFERENCE DOCUMENTS 4.1. Documents supplied by applicant EUT feature information is supplied by the applicant or manufacturer, which is the basis of testing. 4.2. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC Part15 Title 47 of the Code of Federal Regulations; Chapter I 2016 Part 15 - Radio frequency devices Subpart E – UNII Devices FCC 06-96 Revision of Parts 2 and 15 of the Commission’s Rules to Permit Unlicensed National Information Infrastructure 2006 (U-NII) devices in the 5 GHz band Note: This report is only for DFS 4.3. Laboratory Environment Shielded room did not exceed following limits along the EMC testing Temperature Min. = 15 ℃, Max. = 30 ℃ Relative humidity Min. = 35 %, Max. = 60 % Shielding effectiveness 0.014MHz - 1MHz, >60dB; 1MHz - 1000MHz, >90dB. Electrical insulation > 2 MΩ Ground system resistance < 4 Ω ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page8 of 16 5. SUMMARY OF TEST RESULTS 5.1. Summary of Test Results Sub-clause of No Test cases Verdict Part15E Channel move time and 1 15.407 (h)(2)(iii) P channel closing transmission time 2 Non-Occupancy Period 15.407 (h)(2) (iv) P Please refer to ANNEX A for detail. Terms used in Verdict column P Pass, The EUT complies with the essential requirements in the standard. NM Not measured, The test was not measured by SAICT NA Not Applicable, The test was not applicable F Fail, The EUT does not comply with the essential requirements in the standard 5.2. Statements SAICT has evaluated the test cases requested by the applicant/manufacturer as listed in section 5.1 of this report, for the EUT specified in section 3, according to the standards or reference documents listed in section 4.2. This report only deal with the UNII DFS functions among the features described in section 3, and The EUT met all requirements of the reference documents. The end user is not available to get and modify the parameters of the detected Radar Waveforms in this product. 5.3. Terms used in the result table Test Conditions T nom Normal Temperature T min Low Temperature T max High Temperature V nom Normal Voltage V min Low Voltage V max High Voltage H nom Norm Humidity A nom Norm Air Pressure For this report, all the test case listed above is tested under Normal Temperature and Normal Voltage, and also under norm humidity, the specific conditions as following: Temperature T nom 26℃ Voltage V nom 3.8V(By battery) Humidity H nom 44% Air Pressure A nom 1010hPa ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page9 of 16 6. TEST EQUIPMENTS UTILIZED Conducted test system Serial Calibration Calibration No. Equipment Model Manufacturer Number Date Due Date Vector Signal Rohde & 1 FSV40 100903 2019-01-17 1 year Analyzer Schwarz Vector Signal Rohde & 2 SMU200A 104096 2019-01-03 1 year General Schwarz 3 Master device BCM94718NR 1986113 BROADCOM / / Shielding 4 S81 / ETS-Lindgren 2019-11-13 3 years Room ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page10 of 16 ANNEX A: MEASUREMENT RESULTS A.1. Measurement Method A.1.1. Conducted Measurements The below figure shows the DFS setup, where the EUT is a RLAN device operating in slave mode, without Radar Interference Detection function. This setup also contains a device operating in master mode. The radar test signals are injected into the master device. The EUT (slave device) is associated with the master device. WLAN traffic is generated by streaming the mpeg file from the master to the slave in full monitor video mode using the media player. A.1.2. Parameters of DFS test signal 1). Interference threshold values, master or client incorporation in service monitoring. For device Power less than 23dBm (E.I.R.P.), the threshold level is -62 dBm at the antenna port after Correction for antenna gain and procedural adjustments. Because of conducted measurement performed, the calibration power from radar signal generator to antenna port of DFS test equipment is -62 dBm. Maximum Transmit Power Value > 200 mW -64 dBm < 200 mW -62 dBm 2). DFS requirement values The required values are as the following table. Parameter Value Non-occupancy > 1800 s Channel Availability Check Time 60 s Channel Move Time 10 s Channel Closing Transmission Time 200 ms + 60 ms Minimum 80% of the 99% U-NII Detection Bandwidth transmission power bandwidth As the EUT is IP based system, the MPEG video file from NTIA website is used to steam to EUT via the Master device. ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page11 of 16 A.2. Channel move time and channel closing transmission time Measurement Limit: Test Items Limit channel closing transmission time < 200 ms + 60 ms Channel move time < 10 s Measurement Results: HT20 Frequency Band: 5250MHz ~ 5350MHz The channel move time is as the figure. It shows the time of the radar and the client pulses. The figure shows that the client stops transmission within 10 seconds, and no transmissions occur after 10 seconds later of the radar burst signal. ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page12 of 16 The closing transmission time is as the figure, and the result is 63ms. HT80 Frequency Band: 5470MHz ~ 5725MHz The channel move time is as the figure. It shows the time of the radar and the client pulses. The figure shows that the client stops transmission within 10 seconds, and no transmissions occur after 10 seconds later of the radar burst signal. ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page13 of 16 The closing transmission time is as the figure, and the result is 6ms. Conclusion: PASS ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page14 of 16 A.3. Non-Occupancy Period Measurement Limit: Test Items Limit Non-Occupancy Period > 1800 s A3.1 Associated test Associate the master and client, transmit specified stream between the master and client; monitor the analyzer on the operating frequency to make sure no beacons have been transmitted for 1800 seconds. HT20 Frequency Band: 5250MHz ~ 5350MHz The figure above shows that the client does not transmit any emission within 1800 seconds after getting the order of “stop transmits” from the DFS master (access point). ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page15 of 16 HT80 Frequency Band: 5470MHz ~ 5725MHz The figure above shows that the client does not transmit any emission within 1800 seconds after getting the order of “stop transmits” from the DFS master (access point). Conclusion: PASS ©Copyright. All rights reserved by SAICT

No. I18N00940-DFS Page16 of 16 ANNEX B: PHOTOGRAPHS OF THE TEST SET-UP Layout of Conducted Test *** END OF REPORT BODY *** ©Copyright. All rights reserved by SAICT


Document Created: 2018-09-20 12:28:35
Document Modified: 2018-09-20 12:28:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC