User manual 2 of 2

FCC ID: IOM39622B

Users Manual

Download: PDF
FCCID_1248057

Audio Control Audio Control Menu Item Page reduced the volume using the "Volume ⁄ [Position] 75 Offset", the sound generated if you suddenly • [iPod] Displays the Audio Control menu to set the [Surround Control] 77 switch to another source may be extremely sound effect function of this unit. During iPod source only. loud. [EQ] Displays the Graphic Equalizer 1 Display the Source Select Screen [Subwoofer Level] Adjusts the setup screen. (page 73) Audio Control subwoofer volume. You can adjust the front/rear and right/left The setting is available when subwoofer audio balance. is set to any item other than "None". See Graphic Equalizer Setup <Speaker Setup> (page 94). You can Manually set the equalizer curve. 1 Display the Audio Control screen When a video screen is displayed, press [Bass Boost] Sets the amount of bass Touch [ ]>[ ] > [Audio 1 Display the Equalizer screen the [SRC] button. boost. (DNX7 series only) Control]. (page 72) "OFF"/ "Step1"/ "Step2" Touch [ ]>[ ] > [Equalizer]. 2 Display the Audio Control menu (page 72) 2 Set each item [Supreme] Turns ON/OFF the Supreme DNX9/ DDX8 series function. (DNX9/ DDX8 series only) 2 Display the Graphic Equalizer screen Technology to extrapolate and 1 supplement with proprietary algorithm, the high-frequency range that is cut off when encoding. This function works on DVD, USB, SD and iPod sources. Equalizer Control DNX7 series You can set up the equalizer. ⁄ 1 • When "iPod" is selected in <Equalizer In this manual, the above selection is 1 Display the Equalizer screen Control>, the [EQ] button is deactivated. indicated as: Touch [ ]>[ ] > [Equalizer]. "iPod" uses its equalizer function. Touch [ ]>[ ]. (page 72) 3 Select the channel to be adjusted 3 Select the Audio Control item 2 Select EQ curves (DNX9/ DDX8 series only) 1 Adjusts the front/back and left/right volume around the touched area. [2], [3] Adjusts the right and left volume balance. [5], [∞] Adjusts the front and rear volume balance. Item Page [Volume Offset] Finely adjust the [Natural], [Rock], [Pops], [Easy], [F] Front speaker [Audio Control] 72 [Top40], [Jazz], [Game], [iPod], [User] [R] Rear speaker volume of the current source to [Equalizer] 73 Selects an equalizer curve type. minimize the difference in volume [C] Center speaker [EQ] 73 You can select any of the following between different sources. [Zone Control] 74 equalizer curves. [SRS WOW] 76 ⁄ [Space Enhancer] 75 • If you have increased the volume first, then Next page 3 72 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 73

Audio Control 4 Set the Graphic Equalizer Zone Control ⁄ Listening Position DNX9/ DDX8 series You can set the front and rear audio • There are following limitations when zone You can adjust the sound effects according 1 source. function is set to "ON". to your listening position. - There is no output from the subwoofer or 1 Display the Zone Control screen center speaker. 1 Display the Position screen Touch [ ]>[ ] > [Zone - "Bass Boost" of <Audio Control> (page 72) is not Touch [ ]>[ ] > [Position]. Control]. (page 72) available. (page 72) - <Equalizer Control> (page 73), <Space Enhancer> 2 Set the Zone Control (page 75), <Listening Position> (page 75), <SRS 2 Set the Position Control WOW Control> (page 76), and <Surround Control> (page 77) are not available. DNX7 series - <DSP Bypass Control> (page 93), <Speaker 1 Setup> (page 94), <Car Type (DTA) Setup> (page 95), and <Channel Level> (page 97) are not available. Space Enhancer (DNX7 series) You can enhance the soundscape. [P1] - [P3] Stores the present adjustment setup in memory, or recalls 1 Display the Space Enhancer screen it from memory. 1 Gain level can be adjusted by Touch [ ]>[ ] > [Space To store your adjustment in memory: touching the each frequency bar. Enhancer]. (page 72) Continue to touch [P1] to [P3] more [2], [3] Sets a frequency. 2 Set the Space Enhancer than 2 seconds. [5], [∞] Sets a gain level. To call your adjustment from memory: [EQ Init] Returns to the previous level 1 Touch [P1] to [P3] of your adjustment which the gain level is adjusted. you wish to recall from memory. [Flat] Tone curve becomes flat. [Single Zone] Sets the unit to single [2], [3] Sets a listening position. [Bass EXT] Bass Extend settings. You can select any of "Front R" (Right zone. When turned on, the frequency lower front), "Front L" (Left front), "Front All" than 62.5 Hz is set to the same gain [Dual Zone] Sets the unit to dual zone. (All front), "All" (All), and "User" (User) level as 62.5Hz. [Front Source] Sets the front audio positions. [SW Level] Adjusts the subwoofer source. 1 Sets the soundscape level. [DTA] Displays the Position DTA (Digital volume. [Rear Source] Sets the rear audio The setting is available when subwoofer source. ⁄ Time Alignment) screen. is set to any item other than "None". See ⁄ • You cannot set Space Enhancer in tuner source. 3 Exit Position Control <Speaker Setup> (page 94). • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. ⁄ [Rear VOL.] Adjusts the volume of the • The final distance is adjusted to the total of Car rear channel. Type Set Up value (page 95) and Position Setup (both Position and Position DTA) value. • If you change the Car Type Set Up value (page 95), the position is set to "All". Next page 3 74 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 75

Audio Control • Only the adjusted distance of position setup (Position and Position DTA values) is stored in Finely adjust the value set with the ⁄ ⁄ Position function. • FOCUS: Adjusts the vertical position of the • When you have selected the TV or TUNER source memory. Therefore, the final adjustment distance speaker and sound image by virtual and when you set the Dolby PL, we recommend changes if you change the Car Type Set Up value adjustment. you to select the "Dolby PLII Matrix" mode. If you (page 95). SRS WOW Control • TruBass: Assists the playback for the super bass select another Dolby PLII mode, the sound is (DNX9/ DDX8 series) sound. NOT output from rear speakers when you receive Position DTA Control You can set up the SRS WOW effect. • SRS 3D: Makes a natural 3D sound field. monaural broadcasting sounds. You can fine-adjust your listening position. • Some items cannot be adjusted depending on • Surround control can be set for each source. 1 Display the SRS WOW Control screen the selected speaker. 1 Display the Position DTA screen Touch [ ]>[ ] > [SRS WOW]. • SRS WOW control is not available in tuner source, Dolby Pro Logic II Music Adjustment (page 72) TV source and HD Radio source. • When Surround Control is Dolby Pro Logic II, SRS 1 Display the Dolby Pro Logic II Music 2 Set the SRS WOW Control WOW control is not available. Adjust screen 1 2 Select a speaker you wish to adjust Surround Control 1 3 (DNX9/ DDX8 series) 2 You can set up the sound field. 2 Adjust the sound field 1 Display the Surround Control screen 4 6 Touch [ ]>[ ] > [Surround Control]. (page 72) 1 Selects SRS WOW setting. 2 Set the Surround Control 1 Center speaker (DNX9/ DDX8 series) SRS WOW User Setup 1 2 Left front speaker 3 Right front speaker 1 Display the SRS WOW Adjust screen 4 Left rear speaker [Dimension Control] Sets the surround 5 Right rear speaker position by adjusting the front and rear 6 Subwoofer volume balance. [2], [3] Finely adjusts the value set with 2 Adjust the SRS settings [Center Width Control] Sets the vocal the Position function. image position by adjusting the right [Total DTA] Indicates setup distance. 1 1 Sets a sound field. and left vocal volume level. The adjusted distance (Position and You can select any of the following [Panorama Mode] Turns the Panorama Position DTA values), and the total sound fields. mode On or Off. of the distance adjusted by Car Type "Bypass"/ "Bypass+Center"/ "Dolby Set Up (page 95) and the adjustment Pro Logic II Movie"/ "Dolby Pro Logic II ⁄ Music"/ "Dolby Pro Logic II Matrix" • You cannot use the <Surround Control distance for position setup are Adjustment> during playback of a Multi-channel indicated. [Stream Information] Displays the source. present source information. 3 Finely adjust the distance 1 Selects a speaker to be set (Front, The stream (Dolby Digital, dts, Linear Rear or Center speaker). PCM, MPEG, SDDS, AAC or MP3/WMA), [TruBass] Sets the TruBass effect level. input channels (front or rear channels), [FOCUS] Sets the FOCUS effect level. and sampling frequency are displayed. [SRS 3D] Sets the SRS 3D effect level. 76 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 77

Setup Menu You can set up various receiver parameters. 2 Cancel the registration DivX Setup (DNX9/ DDX8 series) Checks the registration code. This code See <Setup Memory> (page 84). is needed when making a disc which has How to Display SETUP Menu Screen DRM (Digital Rights Management). Displays the Setup menu to set various Item Page 1 Display the DivX Setup screen functions. [DivX(R) SETUP] 79 Touch [ ]>[ ] > [DivX(R) 1 Display the Source Select Screen [System] SETUP]. (page 78) [User Interface] 80 [Touch] 81 Touching the screen displays a [Clock] 82 confirmation message. Touch [OK]. [Security] 82 To cancel clearing, touch [Cancel]. When a video screen is displayed, press [Angle] 82 the [SRC] button. [EXT SW] 83 [SETUP Memory] 84 Software Information 2 Display the Setup Menu Screen [Display] Checks the software version of this unit. [Screen Control] 87 [Color] 86 1 Display the Software Information [Background] 85 screen [Bluetooth SETUP] 88 Touch [ ]>[ ] > [Software]. [SIRIUS SETUP] 102 (page 78) [DVD SETUP] 98 [iPod SETUP] 101 Displays the registration code. [USB SETUP] 101 [SD SETUP] 101 ⁄ [TV SETUP] 101 • Disabled when a DVD is being played. [AV-IN SETUP] 91 • When downloading a DivX VOD file controlled by [Navigation] 93 DRM, register the code appeared on the screen [Software] 79 such as the one above. Otherwise the file may In this manual, the above selection is not be able to play with this unit. Remaining [Audio SETUP] 93 indicated as: number of viewing is displayed when playing a [Speaker Select] 94 Touch [ ]>[ ]. DivX VOD file with the viewing restriction. When [Car Type] 95 Displays the software version. the remaining number of viewing reached 0, a 3 Select the setup item [Channel Level] [AV-OUT Interface] 97 91 warning message appears and the file cannot ⁄ be played. • For how to update the software, refer to the [Camera SETUP] 92 relevant update procedure manual which comes with the software. Deactivating DivX Code 1 Display the DivX Deactivation Confirm screen ⁄ • [AV-IN SETUP], [Navigation] and [Audio SETUP] options can be locked. The key mark ( ) is displayed in reverse video for the locked option. Next page 3 78 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 79

Setup Menu User Interface display off. [Cancel] Cancels the selected language. Touch Panel Adjustment You can setup user interface parameters. "CAM": Press the [AUD] button for You can adjust the touch panel operations. longer than 1 second to switch to 1 Display the User Interface screen When [ASR] is set to "Disabled" (DNX9 1 Display the Touch panel Adjustment camera view. only) screen Touch [ ]>[ ] > [System] > [Animation] Sets whether to display When [Select Mode] is set to [User Interface]. (page 78) animation. ( "ON") Touch [ ]>[ ] > [System] > "Advanced" [Touch]. (page 78) 2 Set each item Language Setting 2 Adjust the Touch panel You can select the display language for the control screen and audio file tags. 1 Display the User Interface screen Touch [ ]>[ ] > [System] > [User Interface]. (page 78) [GUI Language Select] Selects the 2 Display the Language Setting screen display language used for the control screen and so forth. Follow the instruction on the screen and ( "American English (en)") touch the center of . [Navigation Language Select] Selects [Cancel] Cancels the Touch Panel Adjust. 3 Select a language the language used for navigation. [Reset] Resets to the initial status. [Beep] Turns the key touch tone On or ( "American English (en)") (DNX7 Off. ( "ON") series only) [Remote Sensor] Selects a remote [User Text Language Select] Selects control signal. ( "ON") the language used for tag text (song When turned "OFF", the remote control information). of TV reception is rejected. ( "American English (en)") [Language] Select the language used for the control screen and setting items. See <Language Setting> (page 80). [ASR] Selects whether to use the voice [Scroll] Allows scrolling of text display control function. (page 56) ( "Enabled") on the Source Control screen. (DNX9960 only) ( "Manual") "Enabled": Voice control is activated. "Auto": Scrolls the screen automatically. "Disabled": Voice control is deactivated. "Manual": Allows you to scroll the [Select Mode] Selects the mode to screen manually. select a language. ( "Easy") [Drawer Close] Sets whether to close Touching [Advanced] allows you to the function bar automatically. select languages for respective items. ( "Auto") [Language Select] Selects a language. [AUD Key Longer than 1 Second] Sets ( "American English (en)") the function of the [AUD] button. (page [Enter] Determines the selected 12) language. "V.OFF": Press the [AUD] button for longer than 1 second to turn the Next page 3 80 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 81

Setup Menu Clock and Date Setup Security Setup EXT SW Setup [Pulse Set] Sets the Pulse signal output You can adjust the clock time. A red indicator will blink on the unit after Sets up the exteral switch power mode. time. the ACC is set to OFF, warning potential Outputs 500ms when "1" is set. 1 Display the Clock Setup screen 1 Display the EXT SW screen Increases by 200ms with each step. Up thieves. Touch [ ]>[ ] > [System] > Touch [ ]>[ ] > [System] > to 100 steps can be set. [Clock]. (page 78) 1 Display the Security screen [EXT SW]. (page 78) Touch [ ]>[ ] > [System] > How To Use the Character Entry Screen 2 Setup the Clock 2 Perform EXT SW Setup [Security]. (page 78) 1 2 Setup the SI (Security Indicator) 1 1 Adjusts month, day, year, hours, and 1 Enters characters. minute. [2], [3] Shifts the cursor. [Reset] Sets "00" minute. [SI] Turns the SI function on or off. [5], [∞] Scrolls up or down the Setup examples: 3:00 – 3:29 \ 3:00 If turned "ON", the security indicator on character button display. 3:30 – 3:59 \ 4:00 the front panel flashes when the vehicle [Shift] Toggles between uppercase and [Synchronize] Sets the clock time in ignition is off. ( "ON") lowercase. synchronization with the time data sent [qwe]/ [abc] Sets the key layout of the from the navigation system or the RDS Monitor Angle Control character buttons. station. ( DNX series: "Navigation", [SW1 Name]/ [SW2 Name] Sets the abc : Alphabetical key layout. You can adjust the position of the monitor. name of the external device. See <How qwe : Qwerty key layout. DDX series: "RDS") "OFF"/ "RDS"*1/ "Navigation" 1 Display the Angle Setup screen To Use the Character Entry Screen> [Clear] Clears the character. When the synchronized mode is set, the (page 83) for information on how to enter Touch [ ]>[ ] > [System] > [Space] Enters a space. clock cannot be adjusted manually. a name. [Angle]. (page 78) If you erase a character, locate the (*1 North American sales area only) [Output Pattern] Sets the power signal cursor on it and touch this button. 2 Set the Monitor Angle output mode. 3 Adjust the date or clock time 1 ( EXT SW1: Pulse, EXT SW2: Level) ⁄ "Pulse": Generates a single power signal • You can enter characters only after you have pulse. applied the parking brake. "Level": Continues output of high power signal. 1 Sets the Monitor angle. Sets to turn output on/off each time the [Off Position] Stores the current button on the EXT SW Control screen is monitor angle as the angle during touched. See <External Device Power power off. Supply Control> (page 55). Next page 3 82 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 83

Setup Menu Setup Memory [Clear] Clears the currently memorized Changing Background image 5 Select the image to load Audio Control, AV-IN SETUP, AV Interface, settings. Loads an image from the connected USB Navigation, and Audio SETUP settings can 4 Memorize or recall the settings device and sets it for the background be memorized. The memorized settings image. can be recalled at any time. For example, When memorizing the Audio Setup and AV Interface settings: 1 Connect the device which has the even when the settings are cleared due to image to load replacement of the battery, the settings can be restored. 2 Display the Background screen 1 Display the SETUP Memory screen If settings have already been memorized, Touch [ ]>[ ] > [Display] > Touch [ ]>[ ] > [System] > a confirmation message appears. Touch [Background]. (page 78) 6 Load the image [SETUP Memory]. (page 78) [Yes]. To cancel memorization, touch 3 Change Standby [No]. 2 Start Setup Memory When recalling the memorized settings: Touching the screen displays a confirmation message. Touch [Yes]. To [ ] Rotates counter clockwise. cancel recalling, touch [No]. [ ] Rotates clockwise. 4 Display the Background Memory [Lock] Locks the AV-IN SETUP, When clearing the currently screen 7 Select Background Change screen Navigation, and Audio SETUP settings. memorized settings: When [Lock] is selected, you cannot change the AV-IN SETUP, Navigation, and Audio SETUP settings. Touching the screen displays a 8 Select an image for background [Yes] Memorizes or recalls the settings. confirmation message. Touch [Yes]. To [No] To cancel the function, touch [No]. cancel clearing, touch [No]. To cancel memorization, touch [No]. 1 The SETUP Menu screen appears again. 5 Quit memorization/recalling of settings [Change] Selects an image for 3 Select a desired function background. [Delete] Deletes the background image. Touching the screen displays a confirmation message. Touch [Yes]. To 1 Returns to the initial background. cancel clearing, touch [No]. 9 Set the image as the background [Recall] Recalls the memorized settings. [Memory] Memorizes the current settings. Next page 3 84 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 85

Setup Menu ⁄ Panel Color Coordinate To register your original color Screen Control • See <About Picture files> (page 6) for readable DNX9/ DDX8 series : Sets the button 1 Start the RGB coordinate You can adjust the screen mode of the image specifications. illumination color. monitor. • The [Memory] button on the “Background” screen DNX7 series : Sets the screen and button 1 Display the Screen Control screen becomes active only in STANDBY source mode. illumination color. • Pressing the [Memory] button on the Touch [ ]>[ ] > [Display] > “Background” screen switches the AV OUT source 1 Display the Color screen [Screen Control]. (page 78) to OFF. For resetting the AV OUT source, refer to 2 Adjust each color value Touch [ ]>[ ] > [Display] > <AV Output Interface Setup> (page 91). 2 Set each item [Color]. (page 78) 2 Display the Panel Color Coordinate screen 1 1 Selects a preset number to register. [Red Value] Adjusts the Red value. [Bright] Brightness Control [Green Value] Adjusts the Green value. [Contrast] Contrast Control [Blue Value] Adjusts the Blue value. [Black] Black Level Adjustment [Initialize] Initialization resets the [Dimmer] Dimmer Mode Setup settings made using the Panel Color to 3 Select a Preset number to register ( "ON") the default settings made at the factory. "ON": The display dims. [Panel Color Scan] When set to "ON", "OFF": The display doesn’t dim. the illumination color of the screen and "SYNC": Turning the Dimmer function buttons changes one after another. On or Off when the vehicle light (DNX9/ DDX8 series only) control switch is turned On or Off. ⁄ "NAV-SYNC": Turning the Dimmer • When touching [SET] or [Initialize], make 2 sec. function On or Off according to the sure [Panel Color Scan] is set to "OFF". Navigation Day/Night display setting. Adjusted color is registered to the (DNX series and DDX series with 3 Select a color selected Preset button. navigation unit only) 1 4 Complete the color coordination ⁄ • In this Screen Control screen, you can perform setups for the menu screen. Setups for videos such as DVD can be performed on the <Screen Control> (page 58). 1 Sets to the touched color. [Adjust] Sets and registers favorite color to the preset buttons ([P1] – [P3]). Next page 3 86 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 87

Setup Menu Registering Bluetooth Unit 4 Display the PIN Code Set screen screen. 4 Go through the procedure of Registers the Bluetooth unit to be ⁄ <Registering Bluetooth Unit> and connected. • You can also register from the Bluetooth unit complete the registration (pairing). 1 side. For the PIN code necessary for registration, 1 Display the Bluetooth Setup screen see <Registering Bluetooth Unit PIN Code> Touch [ ]>[ ] > [Bluetooth (page 89). Registering Bluetooth Unit PIN SETUP]. (page 78) • If pairing cannot be done even when the Code PIN code is correct, try <Registering Special Sets the PIN code of the Bluetooth unit to 2 Display the Connect Device List Bluetooth Unit>. enter when registering (pairing) from the screen 1 Display the PIN Code. cell-phone or audio player side. Registering Special Bluetooth Unit [Search] Searches for a Bluetooth unit. 1 Display the Bluetooth Setup screen Registers Special Bluetooth unit that [Cancel] Cancels searching of Bluetooth results in error by normal operation by Touch [ ]>[ ] > [Bluetooth unit. selecting from model name. SETUP]. (page 78) [PIN Code Set] Display the PIN Code 1 Display the Special Device List screen 2 Display the Receiver PIN Code screen Set screen. 5 Enter PIN code 3 Search for a Bluetooth unit 1 2 Select a model name 1 3 Enter PIN code 1 Enters a code number. [Enter] Enter the PIN code specified for 1 Displays the registered Bluetooth the Bluetooth unit to register. 1 units. This button will not be active until at [ ] When appears, the text display least four PIN code digits have been Displays the Bluetooth unit name that is scrolled by touching it. entered. can be registered. [Search] Searches for a Bluetooth unit. [Cancel] Cancels registration of PIN 3 Confirm whether to register [SP DEV] Registers a Bluetooth unit that code. 1 Enters a code number. cannot be registered by normal register [Clear] Clears the code number. [Cancel] Cancels registration of PIN (paring) operation. code. 6 Select the Bluetooth unit to register ⁄ [Enter] Enters PIN code. • A new device cannot be registered if there 1 [Clear] Clears the code number. are 5 registered Bluetooth units. Delete unnecessary registration. See <Bluetooth Unit Connection> (page 90). ⁄ 1 Displays the searched Bluetooth unit. • Only models in Bluetooth unit name list can Returns to the Connect Device List be registered. Next page 3 88 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 89

Setup Menu Bluetooth Unit Connection Bluetooth Hands-Free/Audio AV Input Setup AV Output Interface Setup Selects the Bluetooth unit to connect. Output Setup You can set AV input parameters. You can set AV output parameters. 1 Display the Bluetooth Setup screen Selects speakers to output the sound of 1 Display the AV-IN Setup screen 1 Display the AV-OUT Interface screen hands-free phoning (such as phone call Touch [ ]>[ ] > [Bluetooth Touch [ ]>[ ] > [AV-IN SETUP]. Touch [ ]>[ ] > [AV-OUT voice and ringing tone) and Bluetooth SETUP]. (page 78) (page 78) Interface]. (page 78) audio. 2 Display the Connect Device List 1 Display the Bluetooth Setup screen 2 Set each item 2 Set each item screen Touch [ ]>[ ] > [Bluetooth SETUP]. (page 78) [AV-IN Interruption] Sets an image [AV-OUT] Selects an AV source to be display of the system that is connected output at the AV OUTPUT port. 3 Select a registered Bluetooth unit via the AV INPUT port. ( "OFF") ( "OFF") "OFF": When the image source is [Bluetooth HF/Audio] Sets the output switched, an image entered via the AV speakers. ( "Front Only") INPUT port is displayed. "Front Only": Outputs from the front "ON": When an image signal is entered speakers. via the AV INPUT port, this image is "All": Outputs from all the speakers. displayed. [iPod AV Interface Use] Sets the terminal which iPod is connected. 4 Select the service to use ( "iPod") [AV-IN1 Name], [AV-IN2 Name], [AV-IN3 Name] Sets a name to be displayed when you select a system that is connected via the AV INPUT port. ( "VIDEO") ⁄ • [iPod AV Interface Use] This item can be set when in STANDBY source [TEL (HFP)] Connects/disconnects cell- and also the iPod is disconnected. phone to use for Hands Free. • [AV-IN Name] [Audio (A2DP)] Connects/disconnects Two AV-IN names are displayed when "iPod" is Audio player to use for Bluetooth Audio. selected in [iPod AV Interface Use] and three are displayed when not selected. [Remove] Deletes registration (pairing). • [AV-IN3 Name] Touching the screen displays a DNX9/ DDX8 series only confirmation message. Touch [Yes]. To cancel clearing, touch [No]. Next page 3 90 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 91

Setup Menu Camera Setup [F-CAM on AV-IN1] Turn this setting Navigation Setup port. You can set Camera parameters. on when the CMOS-300 with ID2 set is You can set Navigation parameters. "OFF": Must be used if no navigation connected. ( "OFF") system is connected. (The navigation 1 Display the AV Interface screen [F-CAM Settings] Adjusts the CMOS- 1 Display the Navigation Setup screen display is cancelled when the AV Touch [ ]>[ ] > [Camera 300 with ID 2 set. For details, see the Touch [ ]>[ ] > [Navigation]. source is switched.) SETUP]. (page 78) option manual. (page 78) [On Screen Navigation] Sets an 2 Set each item 2 Set each item on-screen display of the navigation screen. ( "OFF") (DDX series only) "Auto": Information is displayed for 5 seconds when updated. (Example : when the track/file/song has changed to the next one.) "OFF": Information is not displayed. ⁄ • [On Screen Navigation] It can be set only when [Navigation Input] is set to "AVIN". [Rear Camera] Selects the type of rear [NAV Interrupt Speaker] Selects camera to use. ( "Other") speakers used for voice guidance of the DSP Bypass Control (DNX7 series) "CMOS-300": When the CMOS-300 with navigation system. ( "Front All") Temporarily bypassing DSP (Digital Signal ID 1 set is connected. "Front L": Uses the front left side Processor) System. "Other": When the other camera is speaker for voice guidance. connected. "Front R": Uses the front right side 1 Display the Audio SETUP screen [R-CAM Interruption] Sets a method speaker for voice guidance. Touch [ ]>[ ] > [Audio SETUP]. to switch to the rear view camera video "Front All": Uses both front speakers for (page 78) display. ( "OFF") voice guidance. 2 Set the DSP Select "ON": Switches to the rear view camera [NAV Voice Volume] Adjusts the video display when engaging the shift volume for voice guidance of the knob of car to "Reverse". navigation system. "OFF": Switches to the rear view camera ( DNX series: "25", DDX series: "21") video display when engaging the shift [NAV Mute] Mutes the volume of rear knob of car to "Reverse" and then speakers during voice guidance of the pressing the [AUD] button for longer navigation system. ( "ON") than 1 second. When turned "ON", the volume level The function of the [AUD] button drops for voice guidance. needs to be set to "CAM" in [AUD Key [Bypass] There is no effect by DSP. [Navigation Input] Selects a navigation Longer than 1 Second] beforehand. system connection. ( "RGB") (DDX [Through] There is an effect by DSP. [R-CAM Settings] Adjusts the CMOS- series only) ⁄ 300 with ID 1 set. For details, see the "RGB": Allows the Kenwood’s • When the mode is set to [Bypass], DSP System option manual. Navigation System to connect via its cannot be adjusted. interface cable. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT1 Next page 3 92 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 93

Setup Menu Speaker Setup "Center" None, 2-3/4x1-9/16 inch, 2 inch, 2 Display the Crossover setup screen Car Type (DTA) Setup You can select a speaker type and its size 4 inch, 5 inch, 6-1/2 inch over You can setup the car type and speaker to get the best sound effects. "Front" OEM, 4 inch, 5 inch, 6-1/2 inch, network, etc. 6-3/4 inch, 7 inch, 4x6, 5x7, 6x8, 6x9, 1 Display the Speaker Select screen 7x10 1 Display the Car Type Setup screen Touch [ ]>[ ] > [Audio SETUP] "Rear" None, OEM, 4 inch, 5 inch, 6-1/2 3 Set the crossover Touch [ ]>[ ] > [Audio SETUP] > [Speaker Select]. (page 78) inch, 6-3/4 inch, 7 inch, 4x6, 5x7, 6x8, > [Car Type]. (page 78) 2 Select a speaker you wish to adjust 6x9, 7x10 2 Setup the Car Type When the speaker type and size are "Subwoofer" None, 6 1/2 inch, 8 inch, 10 If your car type is selected, the Digital set, the speaker crossover network and inch, 12 inch, 15 inch over Time Alignment and Equalizer is set equalizer curve are set automatically. ⁄ automatically (for timing adjustment of • Select "None" if you have no speakers. sound output for each channel) to have 1 • If you set the center speaker to "None" even in the highest surround effects. 2 a short time when you are setting the Surround Control to "Bypass+Center", the Surround Control [Phase] Sets the phase of subwoofer 1 3 is set to "Bypass" automatically. See <Surround output. 4 Control> (page 77). The phase is reversed 180 degrees • If you set the center and rear speakers to "None" when set to "Reverse". (Only when when you are setting the Surround Control "Subwoofer" is set to any item other to "Dolby PL II", the Surround Control is set to than "None" in Speaker Setup) 1 Center speaker (DNX9/ DDX8 series) "Bypass" automatically. See <Surround Control> [HPF FREQ] High Pass Filter adjustment. 2 Front speaker (page 77). (When front, center or rear speaker is 3 Rear speaker 1 Sets up the car type you use together selected on Speaker Select screen) Crossover Network Setup with this unit. 4 Subwoofer [LPF FREQ] Low Pass Filter adjustment. You can set a crossover frequency of You can choose according to type of [Tweeter] You can set the tweeter when (When Subwoofer is selected on speakers. your car. you are selecting front speakers. Speaker Select screen) "OFF", "Compact", "Full Size Car", If you are using a tweeter together with 1 Select the speaker to set the [Slope] Sets a crossover slope. "Wagon", "Minivan", "SUV", "Minivan the front speakers, set the tweeter to crossover (Long)" "ON". In the "ON" position, the Equalizer 1 [Location] Sets the locations of the is adjusted to its best position. 2 speakers. [X'over] Displays the Speaker Crossover [Adjust] Displays the Car Type Adjust Setup screen. 3 4 screen. You can adjust the crossover setup You can adjust the digital time that was set automatically when you alignment that was set automatically selected the speaker type. 1 Sets the High Pass Filter of the center when you selected the car type. 3 Select a speaker type speaker. (DNX9/ DDX8 series) 2 Sets the High Pass Filter of the front speaker. 3 Sets the High Pass Filter of the rear speaker. 4 Sets the Low Pass Filter of the You can select any of the following subwoofer. speaker types. Next page 3 94 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 95

Setup Menu Speaker Location setup Car Type Adjust sitting in the front seat, and set the Channel Level (DNX9/ DDX8 series) 1 Display the Speaker Location Setup You can manually set the sound output right and left positions to the center of You can set the volume at each setup screen timing of each channel. the vehicle interior. position. 2 Measure the distances from the 1 Display the Car Type Adjust screen 1 Display the Car Type Setup screen reference point to the speakers. 3 Calculate the distance difference in Touch [ ]>[ ] > [Audio SETUP] accordance with the farthest speaker. > [Channel Level]. (page 78) 2 Set the speaker locations 2 Select a speaker you wish to adjust 2 Select a speaker you wish to adjust +3.4feet 1 2 3 1 2 1.6feet 4 5 3 4 6 2.5feet [Front Speaker] Sets the location of the 5feet +2.5feet 1 Center speaker front speaker. 1 Center speaker (DNX9/ DDX8 series) 2 Left front speaker "Door", "On Dash", "Under Dash" 2 Front speaker +0feet 3 Right front speaker [Rear Speaker] Sets the location of the 3 Rear speaker 4 Left rear speaker rear speaker. 4 Subwoofer 5 Right rear speaker "Door", "Rear Deck" "2nd Row", "3rd Row" (Minivan, Minivan 3 Set a delay time 6 Subwoofer (Long)) [Test Tone] Starts or stops test signal tone output for setup check. 3 Adjust the volume Make fine adjustment of the delay time of the speaker output specified at <Setup the Car Type> to have a more suitable environment for your vehicle. The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior. 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person Next page 3 96 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 97

Setup Menu DVD Setup The operation is available during the DVD Language Setup 4 Set the language you use You can set up the DVD play. play stop mode. Selects a language you use for the speech [Angle Mark] Sets an angle mark and menus. 1 Display the DVD Setup screen display. ( "ON") Touch [ ]>[ ] > [DVD SETUP]. 1 Display the DVD Setup screen [Screen Ratio]*1 Selects the screen (page 78) display mode. ( "16:9") Touch [ ]>[ ] > [DVD SETUP]. "16:9": Displays wide pictures. (page 78) DVD Parental Level Setup 2 Set each item "4:3 LB": Displays wide pictures in the 2 Select the language item to set Sets a parental level. Letter Box format (having black stripes at the top and bottom of screen). 1 Display the DVD Setup screen "4:3 PS": Displays wide pictures in the Touch [ ]>[ ] > [DVD SETUP]. Pan & Scan format (showing pictures (page 78) cut at the right and left ends). 2 Display the Parental Level code [Parental Level]*1 Displays the Parental number screen Lock screen. ( "OFF") See <DVD Parental Level Setup> (page 99). [Disc SETUP] Makes the settings related 3 Enter a language code to the disc media. See <Disc Setup> See <DVD Language Codes> (page 115) (page 100). and select the desired language. [Stream Information] Displays the present source information. 1 The stream (Dolby Digital, dts, Linear [Menu Language]*1 Selects a disc PCM, MPEG, MP3, WMA or AAC) is 3 Enter the code number menu language. See <DVD Language displayed. (DNX7 series only) Setup> (page 99). ⁄ 1 [Subtitle Language]*1 Selects a subtitle • * Disabled when a DVD is being played. language. See <DVD Language Setup> (page 99). 1 Enters a language code. [Audio Language]*1 Selects an audio [Cancel] Cancels the language setup language. See <DVD Language Setup> and returns to the "DVD SETUP" screen. (page 99). [Enter] Sets the language and returns to the "DVD SETUP" screen. (It appears 1 Enters a code number. [Dynamic Range Control]*1 Sets the dynamic range. ( "Dialog") after you have entered a language [Cancel] Cancels the current setup and The dynamic range is reduced by code.) returns to the "DVD SETUP" screen. changing from "Wide" to "Normal" [Original] Sets the DVD's original [Level] Indicates the present parental and from "Normal" to "Dialog". "Dialog" language (only when setting an audio lock level. makes the total sound volume becomes language). [Enter] Determines the code number larger as compared with "Wide" and [Clear] Clears the language code. and displays the Parental Level setup "Normal", allowing you to listen to the screen. movie's dialog more clearly. This is effective only when you are using a Dolby Digital software. Next page 3 98 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 99

Setup Menu [Clear] Clears the code number. Disc Setup ⁄ iPod Setup ⁄ Performs setup when using disc media. • [CD Read] Performs setup when using iPod. • The number you enter first is set as your Disabled when a disc is in the unit. 1 Display the DVD Setup screen You cannot play an Audio file/VCD disc in the 1 Display the iPod Setup screen code number. Touch [ ]>[ ] > [DVD SETUP]. "2" position. Also, you may not play some music Touch [ ]>[ ] > [iPod SETUP]. 4 Display the Parental Level SETUP (page 78) CDs in the "2" position. (page 78) screen 2 Display the Disc Setup screen 2 Set each item USB Setup Performs setup when using USB. 1 Display the USB Setup screen 5 Select a parental level and complete Touch [ ]>[ ] > [USB SETUP]. the setup (page 78) 2 Set each item Example : USB Setup screen [AudioBook Speed] Sets the Audio 3 Set each item book playback speed. ( "Normal") [Wide Screen] Sets Wide Screen on or off. ( "OFF") [On Screen iPod] Sets an on-screen Selects a parental level. display of the iPod Playback screen. ⁄ ( "Auto") • If a disc has higher parental lock level, you need "Auto": Information is displayed for 5 to enter the code number. [Picture Display Time] Selects a picture seconds when updated. • The parental lock level varies depending on a [CD Read] Sets a music CD playback. display time. ( "Long") "OFF": Information is displayed when loaded disc. ( "1") The Display of a JPEG picture is you touch on the screen. • If a disc has no parental lock, anybody can play it back even when you have set the parental lock. "1": Automatically recognizes and plays changed. ("Short", "Middle", "Long") ⁄ back an Audio file disc, a DVD or a [On Screen USB] Sets an on-screen • "Wide Screen" cannot be set while the iPod is music CD. display of the USB Playback screen. connected. "2": Forcibly plays back a disc as a ( "Auto") music CD. Select "2" if you wish to "Auto": Information is displayed for 5 play a music CD having a special seconds when updated. format or if you cannot play a disc in "OFF": Information is displayed when the "1" position. you touch on the screen. [On Screen DVD] Sets an on-screen display of the DVD Playback screen. ( "OFF") "Auto": Information is displayed for 5 seconds when updated. "OFF": Information is not displayed. Next page 3 100 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 101

Setup Menu SIRIUS Parental Code Setup 4 Confirm the code number Parental Lock Setup 6 Select a category Sets a SIRIUS Parental code. (with the Enter the same code number as you Selects the channel to enable SIRIUS optional accessory SIRIUS Tuner connected input in step 3. Parental lock function. 1 only) 1 Display the SIRIUS Setup screen 1 Display the SIRIUS Setup screen Touch [ ]>[ ] > [SIRIUS Touch [ ]>[ ] > [SIRIUS SETUP]. (page 78) SETUP]. (page 78) 2 Display the Parental Code screen SIRIUS Parental code is now set, and the 2 Display the Parental Code screen display returns to SIRIUS Setup screen. 1 Category list Displays all the channels in the selected Change the Parental Code category. [All Channel] Displays all the channels. 1 Display the Parental Code screen 7 Set the parental lock for each channel 1 2 [Clear] Clears the Parental Code. ⁄ ⁄ ⁄ • You need to complete <SIRIUS Parental • If you have already completed the code • Pressing [Clear] for 5 seconds or longer Code Setup> beforehand. registration, [Change] is displayed. deletes the code. 3 Enter the code number 3 Enter the Parental Code number 2 Enter the current code number Enter the same code number as you 3 originally input <SIRIUS Parental Code Setup> (page 102). 1 Channel list 1 2 Sets the Parental lock function on or off for each channel. 3 Selects a channel [Info Change] Switch the sequence of the channel list. (Channel name, Song 1 Enters a code number. title, Artist name, Composer name, and 3 Enter the new code number Category name) [Cancel] Cancels the current setup and returns to the SIRIUS Setup screen. [ UP] Moves to SIRIUS Category 4 Display the Parental Code screen Select screen. [Enter] Determines the code number. [Clear] Clears the code number. 4 Confirm the code number 5 Enter the code number Enter the same code number as you input in step 3. SIRIUS Parental code is now set, and the display returns to SIRIUS Setup screen. Next page 3 102 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 103

Setup Menu Remote Controller 3 Selects a channel This unit can be operated using the Remote Controller supplied with this unit. SIRIUS Skip Channel Select Sets the undesired channels unselected. [Info Change] Switch the sequence of the channel list. (Channel name, Song 1 Display the SIRIUS Setup screen title, Artist name, Composer name, and ¤ CAUTION Touch [ ]>[ ] > [SIRIUS Category name) • Put the Remote Controller in a place where it will not move during braking or other operations. A SETUP]. (page 78) [ UP] Moves to SIRIUS Category dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals Select screen. while driving. 2 Display the Skip Category Select • Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation screen may result. TV Setup • Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause The TV signal receiving areas can be set. the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse (with the optional accessory TV Tuner with water and consult a physician. • Place the battery out of reach of children. In the unlikely event that a child swallows the battery, connected only) immediately consult a physician. 1 Display the TV SETUP screen Touch [ ]>[ ] > [TV SETUP]. (page 78) 3 Select a category 2 Set each item Battery installation Remote Controller mode switch Use two "AAA"/"R03"-size batteries. The functions operated from the remote 1 Insert the batteries with the + and – poles controller differ depending on the position aligned properly, following the illustration of the mode switch. inside the case. AUD U DVD U TVU U NAV 1 Category list [On Screen TV] Sets an on-screen Displays all the channels in the selected display of the TV screen. category. ( "Auto") (with the optional accessory [All Channel] Displays all the channels. TV tuner connected only) "Auto": Information is displayed for 5 4 Set the skip for each channel seconds when updated. 1 2 "OFF": Information is displayed when you touch on the screen. ⁄ AUD mode • If the Remote Controller operates only over Switch to this mode when controlling a shorter distances or does not operate at all, it is selected source or tuner source, etc. possible that the batteries are depleted. In such 3 instances, replace the both batteries with new DVD mode ones. Switch to this mode when playing DVDs or 1 Channel list CDs etc. with the player integrated in this unit. 2 Sets the skip function on or off for each channel. Next page 3 104 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 105

Remote Controller TV mode Dual Zone Hands-free communication DVD/VCD (DVD mode) This is switched when controlling TV. Switches the Dual Zone function ON and When a call comes in, it answers the call. OFF. Track search and file search NAVI mode Selects the track or file to be played. This is switched when controlling Navigation unit. ⁄ • The position of the remote control mode switch Function is indicated in the title of each mode, e.g., "(AUD Rear volume control Switches the function screen mode)". Adjusts volume at rear when the Dual Zone Play/Pause • When controlling a player that is not integrated function is ON. Pauses the track. in the unit, select "AUD" mode. Press again to resume playing. Common operations (AUD mode) MODE Switches the screen mode. Source switching Screen mode changes each time you press Switches to the source to be played. V.SEL Stop this key. Switches to the navigation screen. Memorizes the last point where the disc stopped. When pressed again, the last point is deleted. Volume control Adjusts the volume. Display angle Switches the display angle each time it is pressed. Direct search Volume attenuator Press the key once to lower the volume. Cursor key Pressing this key switches the features that Press again to restore the previous volume. Moves the cursor when displaying menu. can be searched directly. DVD-VIDEO Title number Chapter number Play time Item number* ENTER Cancel Enters options. * You may not be able to use this function with some discs or scenes. Next page 3 106 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 107

Remote Controller VCD 1.X, VCD 2.X (PBC OFF) SUBTITLE Music CD/Audio file/Video file/ search feature, specify the search number Track number Switches the subtitle language. Picture file (AUD mode) from the numeric keypad, and then press [38] key. Cancel Folder search Numeric keypad Selects the folder to be played. VCD 2.X (PBC ON) Scene number Number ZOOM Switches the zoom ratio each time you Cancel press this key. Once you have switched to the direct • Specify the number to search in direct search feature, specify the search number Track search and file search search. from the numeric keypad, and then press Selects the track or file to be played. [ENTER] key. iPod (AUD mode) Numeric keypad Picture Angle Switches the picture angle each time you Music/Video search press this key. Selects the music/video to be played. Play/Pause Pauses the track or file. Press again to resume playing. • Specify the number to search in direct search. AUDIO Play/Pause • Press 1 2 to fast forward/ ABC Switches the voice language each time you Pauses the music/video. backward. Switches the fast forward/ press this key. Press again to resume playing. backward speed each time you press this Direct search key. • Press 4 GHI 5 to slow forward/ JKL backward. Switches the slow playback speed each time you press this key. DVD Top Menu Pressing this key switches the features that Returns to the DVD top menu. can be searched directly. Music CD Track number Play time Cancel DVD Menu Displays the DVD menu. Audio files in DVD/CD disc Turns the playback control on or off while Folder number playing VCD. File number Cancel Once you have switched to the direct Next page 3 108 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 109

Remote Controller Radio (AUD mode) Example: 810kHz (AM) NAVI (NAVI mode) ROUTE M Displays Route Option menu. 8TUV 1 0 FM band switching Cursor key Switches to bands received by the unit. « Scrolls the map, or moves the cursor. or Numeric keypad VIEW Switches between 2D and 3D map displays. AM band ENTER Performs the selected function. • To use preset tuning, press the number of a programmed broadcast station. VOICE Station selection (1 – 6 ) MNO Plays Voice guidance. Switches to broadcast stations received by • Press the direct tuning key first, then the unit. specify the frequency of the station to ZOOM receive. Zooms in or out the navigation map. MAP DIR Switches between the heading up Seek mode switching navigation and north up navigation map Switches the Seek mode (AUTO1, AUTO2, MENU displays. MANU). Displays Main menu. Direct tuning CANCEL After pressing this key, use the keypad to Displays previous screen. specify the broadcast station you wish to receive. POSITION Displays the current position. Example: 92.1MHz (FM) 9WXYZ 2ABC 1 « or Next page 3 110 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 111

Remote Controller Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP TV (TV mode) screen is displayed. Switching Band/Video It switches between the station of the TV 3 End initial setup Initial Setup band to receive and video input. 1 Turns the power On 2 Set each item Channel Selection The TV channel to receive is selected. ⁄ • The settings above can be changed in <Setup Menu> (page 78). Direct tuning (NTSC TV type only) Press this key first, and then specify the [Language] Select the language used station to receive with the numeric keypad. for the control screen and setting items. Example: In case of Channel 6 (2-digit) (page 80) [Angle] You can adjust the position of 0 6MNO the monitor. (page 82) « [iPod AV Interface Use] Sets the or terminal which the iPod is connected to. ( "iPod") Numeric keypad [Color] Sets the screen and button illumination color. (page 86) [EXT SW] Setting up external switch power mode. (page 83) [Camera] You can set Camera parameters. See <Camera Setup> (page • The number of the memorized station is 92). selected. ( 1 – 6 ) MNO • Press the direct tuning key first, then specify the channel of the station to receive. 112 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 113

Status bar Indicator items DVD Language Codes Shown below is a list of indicators Source Code Language Code Language Code Language Display Overview aa Afar ie Interlingue ru Russian displayed on the Status bar. iPod "MUSIC" Identifies the music file. ab Abkhazian ik Inupiak rw Kinyarwanda "VIDEO" Identifies the video file. af Afrikaans id Indonesian sa Sanskrit "RDM" Indicates that the Random function is ON. "A-RDM" Indicates that the Album random function is ON. am Amharic is Icelandic sd Sindhi "REP" Indicates that the Repeat function is ON. ar Arabic it Italian sg Sangho as Assamese ja Japanese sh Serbo-Croatian Tuner "AF" Indicates that the AF search function is ON. "AUTO1" Indicates that Seek mode is set to Auto1. ay Aymara jv Javanese si Singhalese "AUTO2" Indicates that Seek mode is set to Auto2. az Azerbaijani ka Georgian sk Slovak "CRSC" Indicates that the CRSC function is OFF. ba Bashkir kk Kazakh sl Slovenian "MANU" Indicates that Seek mode is set to Manual. "RDS" Indicates the state of the RDS station when the be Byelorussian kl Greenlandic sm Samoan AF function is ON. (White: RDS is being received. bg Bulgarian km Cambodian sn Shona Orange: RDS is not being received.) bh Bihari kn Kannada so Somali Source "ST" Indicates that stereo broadcast is being received. bi Bislama ko Korean sq Albanian Display Overview "TI" Indicates the reception state of traffic information. bn Bengali, Bangla ks Kashmiri sr Serbian General "ATT" Indicates that the attenuator is active. (Orange: TP is being received. White: TP is not "DUAL" Turns on the Dual zone function. bo Tibetan ku Kurdish ss Siswati being received.) br Breton ky Kirghiz st Sesotho "LOUD" Indicates that the Loudness control function is ON. "TEL" Indicates the connection state of the Bluetooth HD Radio "AUTO1" Indicates that Seek mode is set to Auto1. "AUTO2" Indicates that Seek mode is set to Auto2. ca Catalan la Latin su Sundanese hands-free unit. (White: Connected. Orange: "MANU" Indicates that Seek mode is set to Manual. co Corsican lb Luxembourgish sv Swedish Not connected.) "HD" Indicates that HD Radio station is being received. cs Czech ln Lingala sw Swahili DVD/CD "FO-REP" Indicates that the Folder repeat function is ON. "M/S" Indicates whether the reception channel is cy Welsh lo Laotian ta Tamil "IN" Indicates that a disc is inserted. (White: A Disc is main or sub. (Orange: Sub channel White: Main inside the unit. Orange: Error at the disc player.) da Danish lt Lithuanian te Telugu channel) de German lv Latvian, Lettish tg Tajik "MOVIE" Identifies the video file. "ANALOG" Indicates that analog broadcast is being received. "MUSIC" Identifies the music file. dz Bhutani mg Malagasy th Thai "DIGITAL" Indicates that digital broadcast is being received. "RDM" Indicates that the Random function is ON. "ST" Indicates that stereo broadcast is being received. el Greek mi Maori ti Tigrinya "REP" Indicates that the Repeat function is ON. "TAG" Indicates that Tagging is enabled. en English mk Macedonian tk Turkmen Video DVD- VCD "C-REP" Indicates that the Chapter repeat function is ON. eo Esperanto ml Malayalam tl Tagalog XM SIRIUS/ "SCN" Indicates that the channel scan function is ON. "T-REP" Indicates that the Title repeat function is ON. "SEEK1" Indicates that Seek mode is set to 1. "1chLL" Identifies the left audio output of channel 1. es Spanish mn Mongolian tn Setswana "SEEK2" Indicates that Seek mode is set to 2. et Estonian mo Moldavian to Tongan "1chLR" Identifies the monaural audio output of channel TV "AUTO1" Indicates that Seek mode is set to Auto1. eu Basque mr Marathi tr Turkish 1. "AUTO2" Indicates that Seek mode is set to Auto2. "1chRR" Identifies the right audio output of channel 1. "MANU" Indicates that Seek mode is set to Manual. fa Persian ms Malay ts Tsonga "1chST" Identifies the stereo audio output of channel 1. fi Finnish mt Maltese tt Tatar "LL" Identifies the left audio output. fj Fiji my Burmese tw Twi "LR" Identifies the monaural audio output. fo Faroese na Nauru uk Ukrainian "RR" Identifies the right audio output. "ST" Identifies the stereo audio output. fr French ne Nepali ur Urdu "PBC" Indicates that the PBC function is ON. fy Frisian nl Dutch uz Uzbek "SVCD" Identifies the Super Video CD. ga Irish no Norwegian vi Vietnamese "VER1" Indicates that the Video CD version is 1. gd Scots Gaelic oc Occitan vo Volapuk "VER2" Indicates that the Video CD version is 2. gli Galician om (Afan) Oromo wo Wolof "REP" Indicates that the Repeat function is ON. gn Guarani or Oriya xh Xhosa USB "FO-REP" Indicates that the Folder repeat function is ON. "MOVIE" Identifies the video file. gu Gujarati pa Punjabi yo Yoruba "MUSIC" Identifies the music file. ha Hausa pl Polish zh Chinese "PICTURE" Identifies the image file. he Hebrew ps Pashto, Pushto zu Zulu "RDM" Indicates that the Random function is ON. hi Hindi pt Portuguese "REP" Identifies that the Repeat function is ON. hr Croatian qu Quechua "PLST" Indicates that the Play list mode is selected now. hu Hungarian rm Rhaeto-Romance hy Armenian rn Kirundi ia Interlingua ro Romanian 114 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 115

Help? Troubleshooting Help? Error Some functions of this unit may be disabled What might seem to be a malfunction in When the unit fails to operate correctly, "Region code Error" : by some settings made on this unit. your unit may just be the result of slight the cause of the failure appears on the The disc you wanted to play has a region code misoperation or miswiring. Before calling display. that cannot be played with this unit. ! • Cannot set up the subwoofer. service, first check the following table for "Parental level Error" : • Cannot set up subwoofer phase. possible problems. "Protect" : The disc you wanted to play has a higher level • No output from the subwoofer. Protective circuit has been activated because than the parental level you set. • Cannot set up the low pass filter. General a speaker cord has shorted or it has come in • Cannot set up the high pass filter. contact with the car chassis. ▲ Subwoofer is not set to On. ? The Touch Sensor Tone doesn’t sound. ➡ Wire or insulate the speaker cord as "Error 07–67" : ✔ The preout jack is being used. The unit is not operating correctly due to ☞ <Speaker Setup> (page 94) appropriate and then push the Reset some reason or other. ☞ The Touch Sensor Tone can’t be output from button. ▲ The Dual zone function is enabled. ➡ Push the unit's Reset button. If the "Error the preout jack. ☞ <Zone Control> (page 74) 07−67" message does not disappear, see "Hot Error" : Tuner source your nearest Kenwood dealer. When the internal temperature of this unit ! • Cannot select the output destination of the subsource in the Dual zone. ? Radio reception is poor. rises to 60°C or more, the protection circuit is "No Device" (USB device): • Cannot adjust the volume of the rear ✔ The car antenna is not extended. activated and you may not be able to operate The USB device is selected as a source speakers. ☞ Pull the antenna out all the way. the unit. At such times this message will although no USB device is connected. ▲ The Dual zone function is disabled. appear. ➡ Change the source to any source other ✔ The antenna control wire is not connected. ➡ Use the unit again after reducing the ☞ <Zone Control> (page 74) than USB/iPod. Connect an USB device, and ☞ Connect the wire correctly, referring to the temperature inside the vehicle. change the source to USB again. section on <INSTALLATION MANUAL>. ! Cannot play audio files. "Hold Error" : ▲ "CD Read" of <Disc Setup> (page 100) is set to "Disconnected" (iPod, Bluetooth audio Disc source Activation of the protective circuit when the player): "2". ?The specified disc does not play, but temperature inside the disc changer is higher The iPod/Bluetooth audio player is selected another one plays instead. than 60 degrees Celsius stops the disc changer as a source although no iPod/Bluetooth audio ! Cannot Folder select. ✔ The specified CD is quite dirty. from operating. At such times this message player is connected. ▲ The Random play function is enabled. will appear. ☞ Clean the CD. ➡ Change the source to any source other than ➡ Use when the temperature at the site iPod/Bluetooth. Connect an iPod/Bluetooth ! Cannot perform Repeat play. ✔ The disc is severely scratched. where the disc changer has been fitted has audio player, and change the source to ▲ The PBC function of the Video CD is ☞ Try another disc instead. dropped. iPod/Bluetooth again. enabled. Audio file source "Mecha Error" : "No Music" : ! • Cannot set up the equalizer. ?The sound skips when an Audio file is The disc player is malfunctioning. The connected USB device contains no • Cannot set up the crossover network. being played. ➡ Eject the disc and try inserting it again. playable audio file. ▲ The Dual zone function is enabled. ✔ The media is scratched or dirty. Contact the Kenwood dealer if this indicator Media was played that doesn’t have data ☞ <Zone Control> (page 74) ☞ Clean the media, referring to the CD continues blinking or the disc cannot be recorded that the unit can play. ▲ The DSP Select is Bypass. cleaning of the section on <Handling discs> ejected. ☞ <DSP Bypass Control> (page 93) (page 4). "USB Device Error!!" : "Disc Error" : The connected USB device is rated a current ✔ The recording condition is bad. An unplayable disc is inserted. capacity higher than the allowable limit. ☞ Record the media again or use another ➡ Check the USB device. media. "Read Error" : Some trouble may have occurred to the Disc is quite dirty. connected USB device. ➡ Clean the disc, referring tot he section on ➡ Change the source to any source other than <Handling discs> (page 4). USB. Remove the USB device. Disc is upside down. ➡ Load the disc with the labeled side up. Next page 3 116 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 117

Help? Error Specifications "Authorization Error" : "ACQUIRING SIGNAL" : Monitor section Disc Format Connection to the iPod has failed. The unit cannot receive any signal. : DVD-Video/ VIDEO-CD/ CD-DA ➡ Remove the iPod and then reconnect it. ➡ Move the vehicle to the area where the unit Picture Size Sampling Frequency The unit does not support the iPod. can receive signal. : 6.95 inches (diagonal) wide : 44.1/ 48/ 96 kHz ➡ Refer to <iPod/iPhone that can be : 156.6 mm (W) x 81.6 mm (H) Quantifying Bit Number connected to this unit> (page 7). "FIRMWARE UPDATING" : Display System : 16/ 20/ 24 bit Updating the firmware of SIRIUS tuner. : Transparent TN LCD panel "Update your iPod" : ➡ Operation is invalid until the update is Drive System The iPod's software is an older version which completed. : TFT active matrix system USB interface section the unit can not support. Number of Pixels ➡ Confirm that the software for the iPod is the "CHANNELS UPDATING **% COMPLETE" : USB Standard Updating the SIRIUS Channel Map. : 1,152,000 (800H x 480V x RGB) latest version. Refer to <iPod/iPhone that : USB 2.0 High speed ➡ Operation is invalid until the update is Effective Pixels iPod: USB 1.1 Full speed (DNX9/ DDX8 series can be connected to this unit> (page 7). completed. : 99.99 % only) "You only can connect one iPod." : Pixel Arrangement File System More than one iPod are connected to this unit. "SUBSCRIPTION UPDATED" : : RGB striped arrangement : FAT 16/ 32 ➡ Connect only one iPod to the USB terminal Updating the subscription information. Back Lighting Maximum Power Supply Current with iPod tag. ➡ Operation is invalid until the update is : LED : 500 mA completed. "Update your USB database" : D/A Converter The USB device is different from the previous "INVALID CHANNEL" : DVD player section : 24 Bit one or the contained audio files are replaced. The selected channel is invalid. Video Decoder ➡ Select a different channel. D/A Converter ➡ Update your database. Refer to <Source : MPEG1/ MPEG2/ MPEG4/ H.264/ WMV : 24 bit Control Screen> (page 26) of USB Device Audio Decoder "CALL 888-539-SIRIUS TO SUBSCRIBE" : Audio Decoder Control. : MP3/ WMA/ AAC/ WAV (Linear PCM) The selected channel is not subscribed. : Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/ "Navigation Error. Please turn on power ➡ Call the displayed number for subscription. AAC again later." (DNX series only) : Video Decoder Bluetooth section "Check XM Tuner" : The communication error has occurred due to : MPEG1/ MPEG2 The unit cannot recognize the connected XM Technology severely cold temperature. : DivX (DNX9/ DDX8 series) Tuner. : Bluetooth Ver.2.1 + EDR Certified ➡ Turn on power again after warming your car Wow & Flutter ➡ Check the connection of the XM Tuner. Frequency interior. : Below Measurable Limit : 2.402 – 2.480 GHz "No Signal" : Frequency Response "No Navigation" (DDX series only): Output Power The unit cannot receive any signal. DNX9/ DDX8 series This unit does not support the connected : +4dBm (MAX), 0dBm (AVE), Power Class2 ➡ Check the connection of the antenna. Sampling frequency; navigation unit. Maximum Communication range ➡ The latest information on the connectable 96 kHz : 20 – 22,000 Hz "Check Antenna" : : Line of sight approx. 10m (32.8 ft) navigation unit can be obtained from 48 kHz : 20 – 22,000 Hz Something is wrong with the antenna. 44.1 kHz : 20 – 20,000 Hz Profile http://www.kenwood.com/cs/ce. ➡ Check the connection of the antenna. HFP (Hands Free Profile), No navigation unit is connected. DNX7 series Sampling frequency; SPP (Serial Port Profile), ➡ Connect a supported navigation unit. "Ch Unavailable" : HSP (Headset Profile), 96 kHz : 20 – 20,000 Hz The selected channel is invalid. OPP (Object Push Profile), "CHECK SIRIUS" : 48 kHz : 20 – 20,000 Hz ➡ Select a different channel. PBAP (Phonebook Access Profile), The unit cannot recognize the connected 44.1 kHz : 20 – 20,000 Hz SYNC (Synchronization Profile), SIRIUS Tuner Box. "Ch Unauthorized" : Total Harmonic Distortion A2DP (Advanced Audio Distribution Profile), ➡ Check the connection of the SIRIUS Tuner The selected channel is not subscribed. : 0.008 % (1 kHz) AVRCP (Audio/Video Remote Control Profile) Box. S/N Ratio (dB) "Channel Off Air" : : 98 dB (DVD-Video 96 kHz) "ANTENNA ERROR" : The broadcast of the selected channel has Dynamic Range Something is wrong with the antenna. finished. : 98 dB (DVD-Video 96 kHz) ➡ Check the connection of the antenna. Next page 3 118 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 119

Specifications FM tuner section Video section DSP Section Navigation section (DNX series Frequency Range Color System of External Video Input Graphics equalizer only) 200 kHz : 87.9 MHz – 107.9 MHz (DNX9960/ : NTSC DNX9/ DDX8 series Receiver DNX7160/ DNX7020EX/ DDX896) External Video Input Level (mini jack) Band: 13 Band : High-sensitivity GPS receiver 50 kHz : 87.5 MHz – 108.0 MHz (DDX8046BT) : 1 Vp-p/ 75 Ω Frequency (BAND1 – 13) Reception Frequency Usable Sensitivity (S/N : 30 dB) External Audio Max Input Level (mini jack) : 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ : 1575.42 MHz (C/A code) : 9.3 dBf (0.8 μV/ 75 Ω) : 2 V/ 25 kΩ 2.5k/ 4k/ 6.3k/ 10k/ 16k Hz Acquisition Times Quieting Sensitivity (S/N : 50 dB) Channel: Front/ Rear/ Center Video Output Level (RCA jacks) Cold : < 38 seconds : 15.2 dBf (1.6 μV/ 75 Ω) DNX7/ DDX7 series : 1 Vp-p/ 75 Ω Factory Reset : < 45 seconds Band: 5 Band Frequency Response (± 3.0 dB) Audio Output Level (RCA jacks) (On average for a stationary receiver with a Frequency (BAND1 – 5) : 30 Hz – 15 kHz : 1.2 V/ 10 kΩ clear view of the sky) : 62.5/ 250/ 1k/ 4k/ 16k Hz S/N Ratio (dB) Analog RGB input (DDX series only) Accuracy Gain : 70 dB (MONO) : 0.7 Vp-p/ 75 Ω Position : < 10 meters typical : -9/ -8/ -7/ -6/ -5/ -4/ -3/ -2/ -1/ 0/ 1/ 2/ 3/ 4/ Selectivity (± 400 kHz) Velocity : 0.05 m/sec. RMS 5/ 6/ 7/ 8/ 9 dB : ≥ 80 dB Position Method Audio section X'over Stereo Separation : GPS High pass filter : 35 dB (1 kHz) Maximum Power (Front & Rear) Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ Antenna : 50 W x 4 90/ 100/ 120/ 150/ 180/ 220/ : External GPS antenna Full Bandwidth Power (Front & Rear) 250 Hz AM tuner section (4 Ω, 14.4 V, 1 % THD) Slope: -6/ -12/ -18/ -24 dB Frequency Range (10 kHz) : 22 W x 4 External SW Low pass filter : 530 kHz – 1700 kHz Preout Level (V) Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ Maximum Power Supply Current Usable Sensitivity : 5 V/ 10 kΩ (DNX9/ DDX8 series) 120/ 150/ 180/ 220/ 250 Hz, : 500 mA : 28 dBμ : 2 V/ 10 kΩ (DNX7 series) Through Preout Impedance Slope: -6/ -12/ -18/ -24 dB : 80 Ω (DNX9/ DDX8 series) Time alignment General : ≤ 600 Ω (DNX7 series) Front/ Rear/ Subwoofer Operating voltage Speaker Impedance : 0 – 20.01 ft (0.07 ft Step) : 14.4 V (10.5 – 16 V allowable) :4–8Ω Center: 0 – 11.15 ft (0.07 ft Step) (DNX9/ Maximum Current Consumption DDX8 series) : 15 A Position Dimensions (W × H × D) : 0 – 5.68 ft (0.07 ft Step) : 181.7 × 100.0 × 180 mm Channel Level (DNX9/ DDX8 series) 7-3/16 x 3-15/16 x 7-1/8 inch : ± 10 dB Operational Temperature Range : -10 °C – +60 °C Storage Temperature Range : -20 °C – +85 °C Weight DNX9 series : 2.54 kg (5.6 lbs) DNX7 series : 2.50 kg (5.5 lbs) DDX series : 2.48 kg (5.5 lbs) Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly. Specifications subject to change without notice. 120 DNX series DNX9960/ DNX7160/ DNX7020EX DDX series DDX896/ DDX8046BT English 121

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood FCC WARNING DNX9960/ DNX7160/ DNX7020EX/ DDX896: Corporation is under license. Other trademarks and trade names are those of their respective owners. This equipment may generate or use radio frequency energy. Changes or modifications to this 2CAUTION The "AAC" logo is a trademark of Dolby Laboratories. equipment may cause harmful interference unless Use of controls or adjustments or performance of the modifications are expressly approved in the procedures other than those specified herein may iPod is a trademark of Apple Inc., registered in the U.S. and other countries. instruction manual. The user could lose the authority to result in hazardous radiation exposure. iPhone is a trademark of Apple Inc. operate this equipment if an unauthorized change or In compliance with Federal Regulations, following iTunes is a trademark of Apple Inc. modification is made. are reproductions of labels on, or inside the product “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has NOTE relating to laser product safety. been certified by the developer to meet Apple performance standards. This equipment has been tested and found to “Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone Kenwood Corporation comply with the limits for a Class B digital device, 2967-3, ISHIKAWA-MACHI, and has been certified by the developer to meet Apple performance standards. pursuant to Part 15 of the FCC Rules. These limits are HACHIOJI-SHI Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. designed to provide reasonable protection against TOKYO, JAPAN harmful interference in a residential installation. is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other This equipment may cause harmful interference to KENWOOD CORP. CERTIFIES THIS EQUIPMENT countries. radio communications, if it is not installed and used CONFORMS TO DHHS REGULATIONS N0.21 CFR This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual in accordance with the instructions. However, there 1040. 10, CHAPTER 1, SUBCHAPTER J. property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended is no guarantee that interference will not occur in a for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering particular installation. If this equipment does cause Location : Bottom Panel or disassembly is prohibited. harmful interference to radio or television reception, which can be determined by turning the equipment HD Radio™ and the HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corporation. off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. DNX9960/ DDX896/ DDX8046BT: • Increase the separation between the equipment and receiver. DDX8046BT: ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that • Connect the equipment into an outlet on a circuit The marking of products using lasers different from that to which the receiver is connected. plays DivX video. Visit www.divx.com for more information and software tools to convert your files • Consult the dealer or an experienced radio/TV into DivX video. technician for help. CLASS 1 ABOUT DIVX VIDEO-ON-DEMAND: LASER PRODUCT This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) DNX9960/ DNX7160/ DNX7020EX/ DDX896: content. To generate the registration code, locate the DivX VOD section in the device setup menu. IC (Industry Canada) Notice The label is attached to the chassis/case and Go to vod.divx.com with this code to complete the registration process and learn more about Operation is subject to the following two says that the component uses laser beams that DivX VOD. conditions: have been classified as Class 1. It means that the DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. and are used under license. (1) This device may not cause interference, and unit is utilizing laser beams that are of a weaker (2) this device must accept any interference, class. There is no danger of hazardous radiation is a trademark of SRS Labs, Inc. including interference that may cause outside the unit. WOW technology is incorporated under license from SRS Labs, Inc. undesired operation of the device. Manufactured under license from Dolby Laboratories. The term "IC: " before the certification/ Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. registration number only signifies that the Industry Canada technical specification were Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. met. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material DNX7160/ DNX7020EX: – special handling may apply. See www.dtsc. Manufactured under license from Dolby Laboratories. ca.gov/hazardouswaste/perchlorate Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS 2.0 Channel and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment.


Document Created: 2010-02-05 12:11:59
Document Modified: 2010-02-05 12:11:59
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC