Test Report_BT LE

FCC ID: I88WSR30

Test Report

Download: PDF
FCCID_4055839

FCC Test Report FCC ID : I88WSR30 Equipment : Multy U AC2100 Tri-Band WiFi System Model No. : WSR30 Brand Name : ZYXEL Applicant : Zyxel Communications Corporation Address : No.2 Industry East RD. IX, Hsinchu Science Park, Hsinchu 30075, Taiwan, R.O.C Standard : 47 CFR FCC Part 15.247 Received Date : Aug. 01, 2018 Tested Date : Aug, 16 ~ Aug. 23, 2018 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FR880101AE Page : 1 of 34 Report Version: Rev. 01

Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 7 1.3 Test Setup Chart .................................................................................................................................... 7 1.4 Test Equipment List and Calibration Data .............................................................................................. 8 1.5 Test Standards ....................................................................................................................................... 9 1.6 Measurement Uncertainty ...................................................................................................................... 9 2 TEST CONFIGURATION .....................................................................................................................10 2.1 Testing Condition .................................................................................................................................10 2.2 The Worst Test Modes and Channel Details .......................................................................................10 3 TRANSMITTER TEST RESULTS........................................................................................................11 3.1 Conducted Emissions ...........................................................................................................................11 3.2 6dB and Occupied Bandwidth ..............................................................................................................14 3.3 RF Output Power ..................................................................................................................................17 3.4 Power Spectral Density ........................................................................................................................19 3.5 Emissions in Restricted Frequency Bands ...........................................................................................22 3.6 Emissions in non-restricted Frequency Bands .....................................................................................32 4 TEST LABORATORY INFORMATION ...............................................................................................34 Report No.: FR880101AE Page : 2 of 34 Report Version: Rev. 01

Release Record Report No. Version Description Issued Date FR880101AE Rev. 01 Initial issue Oct. 24, 2018 Report No.: FR880101AE Page : 3 of 34 Report Version: Rev. 01

Summary of Test Results FCC Rules Test Items Measured Result [dBuV]: 0.159MHz 15.207 AC Power Line Conducted Emissions Pass 51.97 (Margin -13.55dB) - QP 15.247(d) [dBuV/m at 3m]: 125.04MHz Radiated Emissions Pass 15.209 40.46(Margin -3.04dB) - QP 15.247(b)(3) Maximum Output Power Power [dBm]: 4.25 Pass 15.247(a)(2) 6dB Bandwidth Meet the requirement of limit Pass 15.247(e) Power Spectral Density Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Report No.: FR880101AE Page : 4 of 34 Report Version: Rev. 01

1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range Bluetooth Ch. Freq. (MHz) Channel Number Data Rate (MHz) Mode 2400-2483.5 V4.0 LE 2402-2480 0-39 [40] 1 Mbps Note 1: Bluetooth LE (Low energy) uses GFSK modulation. 1.1.2 Antenna Details Ant. No. Model Type Gain (dBi) Connector 1 WRTT-335ACN PIFA 3 --- 1.1.3 Power Supply Type of Equipment under Test (EUT) Power Supply Type 12Vdc from adapter 1.1.4 Accessories Accessories No. Equipment Description Brand Name: APD Model Name: WB-18R12R 1 AC Adapter Power Rating: I/P: 100-240Vac, 50-60Hz, 0.6A Max O/P: 12Vdc, 1.5A Power Line: 1.8m non-shielded cable without core 2 RJ45 cable 2m non-shielded without core Report No.: FR880101AE Page : 5 of 34 Report Version: Rev. 01

1.1.5 Channel List Frequency band (MHz) 2400~2483.5 Frequency Frequency Frequency Frequency Channel Channel Channel Channel (MHz) (MHz) (MHz) (MHz) 37 2402 9 2422 18 2442 28 2462 0 2404 10 2424 19 2444 29 2464 1 2406 38 2426 20 2446 30 2466 2 2408 11 2428 21 2448 31 2468 3 2410 12 2430 22 2450 32 2470 4 2412 13 2432 23 2452 33 2472 5 2414 14 2434 24 2454 34 2474 6 2416 15 2436 25 2456 35 2476 7 2418 16 2438 26 2458 36 2478 8 2420 17 2440 27 2460 39 2480 1.1.6 Test Tool and Duty Cycle Test tool MP_TEST, Version: RTL819X 3.5 Duty cycle of test signal (%) 63.89% Duty Factor (dB) 1.95 Duty cycle Report No.: FR880101AE Page : 6 of 34 Report Version: Rev. 01

1.1.7 Power Setting Test Frequency (MHz) Modulation Mode 2402 2440 2480 GFSK/1Mbps 17 15 14 1.2 Local Support Equipment List Support Equipment List No. Equipment Brand Model FCC ID Remarks 1 Notebook DELL Latitude E5470 DoC --- 2 Notebook DELL Latitude E5470 DoC --- 1.3 Test Setup Chart Test Setup Diagram No. Signal cable / Length (m) 1 RJ45, 2m non-shielded. 2 RJ45, 10m non-shielded. 3 RJ45, 10m non-shielded. Report No.: FR880101AE Page : 7 of 34 Report Version: Rev. 01

1.4 Test Equipment List and Calibration Data Test Item Conducted Emission Test Site Conduction room 1 / (CO01-WS) Tested Date Aug, 23, 2018 Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Receiver Agilent N9038A MY53290044 Sep. 26, 2017 Sep. 25, 2018 LISN R&S ENV216 101579 Feb. 13, 2018 Feb. 12, 2019 EMCCFD300-BM-B RF Cable-CON EMC 50821 Dec. 18, 2017 Dec. 17, 2018 M-6000 Measurement AUDIX e3 6.120210k NA NA Software Note: Calibration Interval of instruments listed above is one year. Test Item Radiated Emission Test Site 966 chamber 3 / (03CH03-WS) Tested Date Aug, 16 ~ Aug. 17, 2018 Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Spectrum Analyzer R&S FSV40 101499 Jan. 03, 2018 Jan. 02, 2019 Receiver R&S ESR3 101658 Nov. 20, 2017 Nov. 19, 2018 Bilog Antenna SCHWARZBECK VULB9168 VULB9168-685 Apr. 19, 2018 Apr. 18, 2019 Horn Antenna SCHWARZBECK BBHA 9120 D BBHA 9120 D 1206 Jan. 18, 2018 Jan. 17, 2019 1G-18G Horn Antenna SCHWARZBECK BBHA 9170 BBHA 9170517 Nov. 23, 2017 Nov. 22, 2018 18G-40G Loop Antenna R&S HFH2-Z2 100330 Nov. 13, 2017 Nov. 12, 2018 Loop Antenna Cable KOAX KABEL 101354-BW 101354-BW Dec. 07, 2017 Dec. 06, 2018 Preamplifier EMC EMC02325 980187 Sep. 04, 2017 Sep. 03, 2018 Preamplifier Agilent 83017A MY53270014 Aug. 09, 2018 Aug. 08, 2019 Preamplifier EMC EMC184045B 980192 Aug. 09, 2018 Aug. 08, 2019 RF cable-3M HUBER+SUHNER SUCOFLEX104 MY22620/4 Nov. 27, 2017 Nov. 26, 2018 RF cable-8M HUBER+SUHNER SUCOFLEX104 MY32487/4 Nov. 27, 2017 Nov. 26, 2018 RF cable-1M HUBER+SUHNER SUCOFLEX104 MY22624/4 Nov. 27, 2017 Nov. 26, 2018 EMC8D-NM-NM-800 LF cable-0.8M EMC EMC8D-NM-NM-800 Nov. 27, 2017 Nov. 26, 2018 -001 EMC8D-NM-NM-300 LF cable-3M EMC 131103 Nov. 27, 2017 Nov. 26, 2018 0 EMC8D-NM-NM-130 LF cable-13M EMC 131104 Nov. 27, 2017 Nov. 26, 2018 00 Measurement AUDIX e3 6.120210g NA NA Software Note: Calibration Interval of instruments listed above is one year. Report No.: FR880101AE Page : 8 of 34 Report Version: Rev. 01

Infernational Certification Corp. Test Item RF Conducted Test Site (THO1—WS) Tested Date Aug, 22, 2018 Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Spectrum Analyzer R&S FSV40 101063 Apr. 16, 2018 Apr. 15, 2019 Power Meter Anritsu ML2495A 1241002 Oct. 16, 2017 Oct. 15, 2018 Power Sensor Anritsu MA2411B 1207366 Oct. 16, 2017 Oct. 15, 2018 Signal Generator R&S SMB100A 175727 Oct. 26, 2017 Oct. 25, 2018 ASO'DL?RV\(I:EER APC AFC—500W E312060012 Dec. 01, 2017 Nov. 30, 2018 Mes’ag#‘:’ea%ent Sporton Sporton_1 1.3.30 NA NA Note: Calibration Interval of instruments listed above is one year. 1.5 Test Standards According to the specification of EUT, the EUT must comply with following standards and KDB documents. 47 CFR FCC Part 15.247 ANSI C63.10—2013 FCC KDB 558074 D01 DTS Meas Guidance v05 1.6 Measurement Uncertainty I1SO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Measurement Uncertainty Parameters Uncertainty Bandwidth +34.134 Hz Conducted power +0.808 dB Power density +0.463 dB Conducted emission +2.670 dB AC conducted emission £+2.90 dB Radiated emission < 1GHz +3.66 dB Radiated emission > 1GHz £+5.37 dB Report No.: FR880101AE Page : 9 of 34 Report Version: Rev. 01

C Infernational Certification Corp. 2 Test Configuration 2.1 Testing Condition Test Item Test Site Ambient Condition Tested By AC Conduction COO1—WwsSs 23°C / 55% Alex Huang Radiated Emissions O3CHO3—WS 25°C / 62% Roger Lu RF Conducted THO1—WS 21°C / 64% Aska Huang » FCC Designation No.: TWO009 » FCC site registration No.: 207696 » IC site registration No.: 10807C—1 2.2 The Worst Test Modes and Channel Details , Test Frequency Test Test item Mode (MH2) Data Rate Configuration AC Power Line Conducted Emissions Radiated Emissions S 1GHz BT LE 2402 1Mbps Maximum Output Power 64B bandwicth _ BTLE 2402, 2440, 2480 1Mbps Power spectral density Radiated Emissions > 1GHz Report No.: FR880101AE Page : 10 of 34 Report Version: Rev. 01

3 Transmitter Test Results 3.1 Conducted Emissions 3.1.1 Limit of Conducted Emissions Conducted Emissions Limit Frequency Emission (MHz) Quasi-Peak Average 0.15-0.5 66 - 56 * 56 - 46 * 0.5-5 56 46 5-30 60 50 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Test Procedures 1. The device is placed on a test table, raised 80 cm above the reference ground plane. The vertical conducting plane is located 40 cm to the rear of the device. 2. The device is connected to line impedance stabilization network (LISN) and other accessories are connected to other LISN. Measured levels of AC power line conducted emission are across the 50 Ω LISN port. 3. AC conducted emission measurements is made over frequency range from 150 kHz to 30 MHz. 4. This measurement was performed with AC 120V/60Hz 3.1.3 Test Setup Report No.: FR880101AE Page : 11 of 34 Report Version: Rev. 01

3.1.4 Test Result of Conducted Emissions Modulation Mode GFSK Test Freq. (MHz) 2402 Power Phase Line Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB). 2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV). Report No.: FR880101AE Page : 12 of 34 Report Version: Rev. 01

Modulation Mode GFSK Test Freq. (MHz) 2402 Power Phase Neutral Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB). 2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV). Report No.: FR880101AE Page : 13 of 34 Report Version: Rev. 01

3.2 6dB and Occupied Bandwidth 3.2.1 Limit of 6dB Bandwidth The minimum 6dB bandwidth shall be at least 500 kHz. 3.2.2 Test Procedures 6dB Bandwidth 1. Set c resolution bandwidth (RBW) = 100 kHz, Video bandwidth = 300 kHz. 2. Detector = Peak, Trace mode = max hold. 3. Sweep = auto couple, Allow the trace to stabilize. 4. Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower) that are attenuated by 6dB relative to the maximum level measured in the fundamental emission. Occupied Bandwidth 1. Set resolution bandwidth (RBW) = 1% ~ 5 % of OBW, Video bandwidth = 3 x RBW 2. Detector = Sample, Trace mode = max hold. 3 Sweep = auto couple, Allow the trace to stabilize. 4. Use the OBW measurement function of spectrum analyzer to measure the occupied bandwidth. 3.2.3 Test Setup Report No.: FR880101AE Page : 14 of 34 Report Version: Rev. 01

3.2.4 Test Result of 6dB and Occupied Bandwidth Summary Mode Max-N dB Max-OBW ITU-Code Min-N dB Min-OBW (Hz) (Hz) (Hz) (Hz) 2.4-2.4835GHz - - - - - BT-LE(1Mbps) 554.348k 1.042M 1M04F1D 536.232k 1.042M Max-N dB = Maximum 6dB down bandwidth; Max-OBW = Maximum 99% occupied bandwidth; Min-N dB = Minimum 6dB down bandwidth; Min-OBW = Minimum 99% occupied bandwidth; Result Mode Result Limit Port 1-N dB Port 1-OBW (Hz) (Hz) (Hz) BT-LE(1Mbps) - - - - 2402MHz Pass 500k 536.232k 1.042M 2440MHz Pass 500k 554.348k 1.042M 2480MHz Pass 500k 550.725k 1.042M Port X-N dB = Port X 6dB down bandwidth; Port X-OBW = Port X 99% occupied bandwidth; Report No.: FR880101AE Page : 15 of 34 Report Version: Rev. 01

Infernational Certification Corp. BT—LE(1Mbps) EBW 2402MHz [ChFreq 5 ChFreq 2402GH 0= 24020 Span s Span 2350c 40— 23WHe RBW as— rew 1o0itts on MiHe vew vew sls 5 100642 Sweep Time 2 Sweep Time Ims ol 101ms Detector Type o~ Detector Type Pesk us Sample C aso~ Port|A/ 2asinse ‘ aadise 2abe 2aose * aaodess 64B(. F—edB(H) Fr—bdBAix) OBW(H.. FEOBW(He) Fh—OBW(Hz) LimitHz) Port sseadn ratieste 2a02i00G 10M 2M0M70G 2atesze 5i0k 1 BT—LE(1Mbps) EBW 2440MHz Ch Freq 57 Ch Freq 2A0GHz 0 244GHz Span s Span 2350c «40— 23Mz raw as— sew To0kHiz am~ 2oible vew as— vew Bo0ldtc 1004c Sweep Time A Sweep Time Ims B5 10ims Detestor Type o~ Detestor Type Pesk as~ Sample Pord [A/ 2aserse aasse aate 2uitse 2amrsg GdB(He FLSdB(H) Fr—SdB(:) OBW(H) FEOBW(He) Fh—OBWHe) Limi(He) Port ssesimk 2asoutse 2doioog 102M 2uz0i70c 2w05_ 5i0k 1 BT—LE(1Mbps) EBW 2480MHz [ Ch Freg e [ ChFreq 2ascrts 0— 2asorts Span s Span 2svite 40— 25viHz raw as~ rew vew vew cooiete 2+ 10062 Sweep Time A Sueep Time Ims hok 10ims Detector Type an~ Detector Type Pesk as~ Sample 2 5[ st s I I I ol /\ ‘ Port_[AZ ) zse awose ziss rasbse zasusg 6dB(e F—SdBH) Fh—6dBAt) OBW(Hd FEOBW(H) Fh—OBW(He) Limit(H) Port 550725k 24796456 2480196G 10420 2ar9um0 2asosms 500k 1

3.3 RF Output Power 3.3.1 Limit of RF Output Power Conducted power shall not exceed 1Watt. Antenna gain <= 6dBi, no any corresponding reduction is in output power limit. 3.3.2 Test Procedures A broadband RF power meter is used for output power measurement. The video bandwidth of power meter is greater than DTS bandwidth of EUT. If duty cycle of test signal is not 100 %, trigger and gating function of power meter will be enabled to capture transmission burst for measuring output power. 3.3.3 Test Setup 3.3.4 Test Result of Maximum Output Power Peak Power Summary Mode Power Power (dBm) (W) 2.4-2.4835GHz - - BT-LE(1Mbps) 4.25 0.00266 Result Mode Result Gain Power Power Limit (dBi) (dBm) (dBm) BT-LE(1Mbps) - - - - 2402MHz Pass 3.00 4.02 30.00 2440MHz Pass 3.00 3.97 30.00 2480MHz Pass 3.00 4.25 30.00 Report No.: FR880101AE Page : 17 of 34 Report Version: Rev. 01

Average power Summary Mode Power Power (dBm) (W) 2.4-2.4835GHz - - BT-LE(1Mbps) 3.97 0.00249 Result Mode Result Gain Power Power Limit (dBi) (dBm) (dBm) BT-LE(1Mbps) - - - - 2402MHz Pass 3.00 3.77 - 2440MHz Pass 3.00 3.74 - 2480MHz Pass 3.00 3.97 - Note: Average power is for reference only. Report No.: FR880101AE Page : 18 of 34 Report Version: Rev. 01

3.4 Power Spectral Density 3.4.1 Limit of Power Spectral Density Power spectral density shall not be greater than 8 dBm in any 3 kHz band. 3.4.2 Test Procedures 1. Set the RBW = 3 kHz, VBW = 10 kHz. 2. Detector = Peak, Sweep time = auto couple. 3. Trace mode = max hold, allow trace to fully stabilize. 4. Use the peak marker function to determine the maximum amplitude level. 3.4.3 Test Setup Report No.: FR880101AE Page : 19 of 34 Report Version: Rev. 01

3.4.4 Test Result of Power Spectral Density Summary Mode PD (dBm/RBW) 2.4-2.4835GHz - BT-LE(1Mbps) 1.76 RBW=3kHz. Result Mode Result Gain PD PD Limit (dBi) (dBm/RBW) (dBm/RBW) BT-LE(1Mbps) - - - - 2402MHz Pass 3.00 1.72 8.00 2440MHz Pass 3.00 1.76 8.00 2480MHz Pass 3.00 1.68 8.00 RBW=3kHz. Report No.: FR880101AE Page : 20 of 34 Report Version: Rev. 01

Report No.: FR880101AE Page : 21 of 34 Report Version: Rev. 01

C Infernational Certification Corp. 3.5 Emissions in Restricted Frequency Bands 3.5.1 Limit of Emissions in Restricted Frequency Bands Restricted Band Emissions Limit Frequency Range (MHz)| Field Strength (uV/m) |Field Strength (dBuV/m)| Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 — 13.8 300 0.490~1.705 24000/F(kHz) 33.8 — 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Qusai—Peak value is measured for frequency below 1GHz except for 9—90 kHz, 110—490 kHz frequency band. Peak and average value are measured for frequency above 1GHz. The limit on average radio frequency emission is as above table. The limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit Note 2: Measurements may be performed at a distance other than what is specified provided. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor as below, Frequency at or above 30 MHz: 20 dB/decade Frequency below 30 MHz: 40 dB/decade. 3.5.2 Test Procedures 1. Measurement is made at a semi—anechoic chamber that incorporates a turntable allowing a EUT rotation of 360°. A continuously—rotating, remotely—controlled turntable is installed at the test site to support the EUT and facilitate determination of the direction of maximum radiation for each EUT emission frequency. The EUT is placed at test table. For emissions testing at or below 1 GHz, the table height is 80 cm above the reference ground plane. For emission measurements above 1 GHz, the table height is 1.5 m 2. Measurement is made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna is varied in height (1m ~4m) above the reference ground plane to obtain the maximum signal strength. Distance between EUT and antenna is 3 m. 3. This investigation is performed with the EUT rotated 360°, the antenna height scanned between 1 m and 4 m, and the antenna rotated to repeat the measurements for both the horizontal and vertical antenna polarizations. Note: 1. 120kHz measurement bandwidth of test receiver and Quasi—peak detector is for radiated emission below 1GHz. 2. RBW=1MHz, VBW=3MHz and Peak detector is for peak measured value of radiated emission above 1GHz. 3. RBW=1MHz, VBW=1/T and Peak detector is for average measured value of radiated emission above 1GHz. Report No.: FR880101AE Page : 22 of 34 Report Version: Rev. 01

3.5.3 Test Setup Radiated Emissions below 1 GHz Radiated Emissions above 1 GHz Report No.: FR880101AE Page : 23 of 34 Report Version: Rev. 01

3.5.4 Transmitter Radiated Unwanted Emissions (Below 1GHz) Modulation GFSK Test Freq. (MHz) 2402 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR880101AE Page : 24 of 34 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2402 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR880101AE Page : 25 of 34 Report Version: Rev. 01

3.5.5 Transmitter Radiated Unwanted Emissions (Above 1GHz) for GFSK Modulation GFSK Test Freq. (MHz) 2402 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: ”*” is Peak / Average value of fundamental frequency Report No.: FR880101AE Page : 26 of 34 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2402 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: ”*” is Peak / Average value of fundamental frequency Report No.: FR880101AE Page : 27 of 34 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2440 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: ”*” is Peak / Average value of fundamental frequency Report No.: FR880101AE Page : 28 of 34 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2440 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: ”*” is Peak / Average value of fundamental frequency Report No.: FR880101AE Page : 29 of 34 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2480 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: ”*” is Peak / Average value of fundamental frequency Report No.: FR880101AE Page : 30 of 34 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2480 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: ”*” is Peak / Average value of fundamental frequency Report No.: FR880101AE Page : 31 of 34 Report Version: Rev. 01

3.6 Emissions in non-restricted Frequency Bands 3.6.1 Emissions in non-restricted frequency bands limit Peak power in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at least 20 dB relative to the maximum in-band peak PSD level in 100 kHz. 3.6.2 Test Procedures Reference level measurement 1. Set RBW=100kHz, VBW = 300kHz , Detector = Peak, Sweep time = Auto 2. Trace = max hold , Allow Trace to fully stabilize 3. Use the peak marker function to determine the maximum PSD level Emission level measurement 1. Set RBW=100kHz, VBW = 300kHz , Detector = Peak, Sweep time = Auto 2. Trace = max hold , Allow Trace to fully stabilize 3. Scan Frequency range is up to 25GHz 4. Use the peak marker function to determine the maximum amplitude level 3.6.3 Test Setup Report No.: FR880101AE Page : 32 of 34 Report Version: Rev. 01

3.6.4 Test Result of Emissions in non-restricted Frequency Bands Report No.: FR880101AE Page : 33 of 34 Report Version: Rev. 01

C Infernational Certification Corp. 4 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust—based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website http://www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886—2—2601—1640 Tel: 886—3—271—8666 Tel: 886—3—271—8640 No. 30—2, Ding Fwu Tsuen, Lin No. 3—1, Lane 6, Wen San 3rd St., No. 14—1, Lane 19, Wen San 3rd Kou District, New Taipei City, Kwei Shan District, Tao Yuan City St., Kwei Shan District, Tao Yuan Taiwan, R.0.C. 333, Taiwan, R.O.C. City 333, Taiwan, R.O.C. If you have any suggestion, please feel free to contact us as below information. Tel: 886—3—271—8666 Fax: 886—3—318—0155 Email: ICC_Service@icertifi.com.tw ==END= Report No.: FR880101AE Page : 34 of 34 Report Version: Rev. 01


Document Created: 2018-10-24 13:30:58
Document Modified: 2018-10-24 13:30:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC