Test Report

FCC ID: H8NSFE3046

Test Report

Download: PDF
FCCID_4037134

Global Product Compliance Laboratory 600-700 Mountain Avenue Room 5B-108 Murray Hill, New Jersey 07974-0636 USA TESTING NVLAP LAB CODE: 100275-0 FCC Test Report Regulation: FCC Part 2 and 27 Client: Nokia Mobile Networks Product Evaluated: TMO SOHO V2 B2/B4 SS2FII-Femtocell FCCID: H8NSFE3046 Report Number: TR-2018-0188-FCC2-27 Date Issued: October 12, 2018 This report shall not be reproduced, in whole or in part without the approval of Nokia Global Product Compliance Laboratory. This report must not be used by the recipient to claim product endorsement by NVLAP or any other agency of the U.S. Government.

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell Table of Contents 1. SYSTEM INFORMATION AND REQUIREMENTS ............................................................................................ 4 1.1 INTRODUCTION ............................................................................................................................................. 5 1.2 PURPOSE AND SCOPE ..................................................................................................................................... 5 1.3 EUT DETAILS ................................................................................................................................................ 5 1.4 REFERENCE DOCUMENTS, TEST SPECIFICATIONS & PROCEDURES.......................................................................... 6 1.5 EXECUTIVE SUMMARY ..................................................................................................................................... 8 1.6 TEST CONFIGURATION FOR ALL ANTENNA PORT MEASUREMENTS. ......................................................................... 8 2. FCC SECTION 2.1046 - RF POWER OUTPUT ................................................................................................ 9 2.1 RF POWER OUTPUT ....................................................................................................................................... 9 3. FCC SECTION 2.1047 - MODULATION CHARACTERISTICS ....................................................................... 11 3.1 MODULATION CHARACTERISTICS .................................................................................................................... 11 4. FCC SECTION 2.1049 – OCCUPIED BANDWIDTH ....................................................................................... 12 4.1 OCCUPIED BANDWIDTH ................................................................................................................................ 12 4.2 OCCUPIED BANDWIDTH/ EDGE OF BAND EMISSIONS .......................................................................................... 14 5. FCC SECTION 2.1051 - SPURIOUS EMISSIONS AT TRANSMIT ANTENNA PORT....................................... 16 5.1 MEASUREMENT OF SPURIOUS EMISSIONS AT TRANSMIT ANTENNA PORT ............................................................... 16 6. FCC SECTION 2.1053 .................................................................................................................................. 22 6.1 SECTION 2.1053 FIELD STRENGTH OF SPURIOUS EMISSIONS ............................................................................ 22 6.2 FIELD STRENGTH OF SPURIOUS EMISSIONS - LIMITS.......................................................................................... 22 7. NVLAP CERTIFICATE OF ACCREDITATION ................................................................................................. 23 PUBLIC Page 2 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell Revisions Date Revision Section Change 10/12/2018 0 Initial Release Nokia Global Product Compliance Laboratory represents to the client that testing was done in accordance with standard procedures as applicable, and that reported test results are accurate within generally accepted commercial ranges of accuracy in accordance with the scope of our NVLAP Accreditation. Nokia Global Product Compliance reports only apply to the specific samples tested. This report is the property of the client. This report shall not be reproduced except in full without the written approval of the Nokia Global Product Compliance Laboratory. Nokia Global Product Compliance Laboratory is accredited with the US Department of Commerce National Institute of Standards and Technology's National Voluntary Laboratory Accreditation Program (NVLAP) for satisfactory compliance with criteria established in Title 15, Part 7 Code of Federal Regulations for offering test services for selected test methods in Electromagnetic Compatibility; Voluntary Control Council for Interference (VCCI), Japan; Australian Communications and Media Authority (ACMA). Nokia Global Product Compliance Laboratory represents to the client that the laboratory’s accreditation or any of its calibration or test reports in no way constitutes or implies product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. Prepared By: Approved By: Signed: 10/12/2018 Signed: 10/12/2018 Nilesh Patel Raymond Johnson Compliance Engineer Technical Manager Reviewed By: Signed: 10/12/2018 Steve Gordon Compliance Engineer PUBLIC Page 3 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 1. System Information and Requirements Equipment Under Test (EUT): TMO SOHO V2 B2/B4 SS2FII-Femtocell FCCID: H8NSFE3046 Serial Number: LBALLUASK183000010 Cell Name / Number GPCL Project Number:2018-0188 Company: NOKIA SOLUTIONS AND NETWORKS OY KARAPORTTI 3, FI-02610 ESPOO FINLAND Manufacturer: NOKIA SOLUTIONS AND NETWORKS OY Test Requirement(s): 47 CFR FCC Part 2 and 27 Test Standards • 47 CFR FCC Parts 2 and 27 • KDB 971168 D01 Power Measurement License Digital Systems v03r01 April 9, 2018. • KDB 662911 D01 Multiple Transmitter Output v02r01 Oct 2013 Measurement Procedure(s): FCC-IC-OB - GPCL Occupied Bandwidth and Power Measurement Test Procedure 12-4-2017 FCC-IC-SE - GPCL Spurious Emissions Test Procedure 12-4-2017 Reference(s): • ANSI C63.26 (2015) • ANSI C63.4 (2014) Test Date(s): July/August 2018 Test Performed By: Nokia Global Product Compliance Laboratory 600-700 Mountain Ave. P.O. Box 636 Murray Hill, NJ 07974-0636 Nokia Global Product Compliance Laboratories is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP®) for specific services, listed on the Scope of Accreditation, for: Electromagnetic Compatibility and Telecommunications. This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009). NVLAP LAB CODE: 100275-0. Product Engineer(s): Ron Remy, Obi Okorie Lead Engineer Steve Gordon Test Engineer (s): Jaideep Yadav Test Results: The TMO SOHO V2 B2/B4 SS2FII-Femtocell, as tested met the above listed requirements. Report copies and other information not contained in this report are held by either the product engineer or in an identified file at the Global Product Compliance Laboratory in New Providence, NJ. PUBLIC Page 4 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 1.1 Introduction This Conformity test report applies to the TMO SOHO V2 B2/B4 SS2FII-Femtocell, hereinafter referred to as the Equipment Under Test (EUT). 1.2 Purpose and Scope The purpose of this document is to provide the testing data required for qualifying the EUT in compliance with FCC Parts 2 and 27 measured in accordance with the procedures set out in Section 2.1033 (c) (14) of the Rules. The EUT was tested for Class II Permissive change due to EOL components requiring a re-spin of the PCB. Testing demonstrates previously filed bandwidths and modes of operation including Guard band NB-IoT. 1.3 EUT Details PUBLIC Page 5 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 1.3.1 Test Requirements Each required measurement is listed below: 47 CFR FCC Sections Description of Tests Test Required 2.1046 RF Power Output Yes 2.1047 Modulation Characteristics Yes 2.1049 (a) Occupied Bandwidth Yes (b) Out-of-Band Emissions 2.1051 Spurious Emissions at Antenna Terminals Yes 2.1053 Field Strength of Spurious Radiation Yes 1.4 Reference Documents, Test Specifications & Procedures A list of the applicable documents is provided in Section 1.0. 1.4.1 Test Specifications  Title 47 Code of Federal Regulations, Federal Communications Commission Part 2.  Title 47 Code of Federal Regulations, Federal Communications Commission Part 27. PUBLIC Page 6 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 1.4.2 Procedures 1. FCC-IC-0B and FCC-IC-SE 2. ANSI C63.4 (2014) entitled: “American National Standard for Methods of Measurement of Radio- Noise Emissions from Low Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40 GHz”, American National Standards Institute, Institute of Electrical and Electronic Engineers, Inc., New York, NY 10017-2394, USA. 3. FCC KDB 971168 D01 Power Measurement License Digital Systems v03r01 April 9, 2018. FCC KDB 662911 D01 Multiple Transmitter Output v02r01 Oct 2013 1.4.3 MEASUREMENT UNCERTAINTY The results of the calculations to estimate uncertainties for the several test methods and standards are shown in the Table below. These are the worst-case values. Worst-Case Estimated Measurement Uncertainties Expanded Frequency Standard, Method or Procedure Condition Uncertainty MHz (k=2) a. Classical Emissions, (e.g., ANSI Conducted Emissions 0.009 - 30 ±3.5 dB C63.4, CISPR 11, 14, 22, etc., using ESHS 30, Radiated Emissions 30 MHz – 200MHz H ±5.1 dB (AR-6 Semi-Anechoic 30 MHz – 200 MHz V ±5.1 dB Chamber) 200 MHz – 1000 MHz H ±4.7 dB 200 MHz – 1000 MHz V ±4.7 dB 1 GHz - 18 GHz ±3.3 dB Signal Expanded Uncertainty Antenna Port Test Bandwidth Frequency Range (k=2), Amplitude 10 Hz 9 kHz to 20 MHz Occupied Bandwidth, Edge of Band, 100 Hz 20 MHz to 1 GHz 1.78 dB Conducted Spurious Emissions 10 kHz to 1 MHz 1 GHz to 10 GHz 1MHz 10 GHz to 40 GHz: RF Power 10 Hz to 20 MHz 50 MHz to 18 GHz 0.5 dB PUBLIC Page 7 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 1.5 Executive Summary Requirement Description Result 47 CFR FCC Parts 2 and 27 2.1046 RF Power Output COMPLIES Peak to Average Power Ratio 2.1047 Modulation Characteristics COMPLIES 2.1049 Occupied Bandwidth COMPLIES (a) Emissions Signal Bandwidth (b) Occupied Bandwidth/ Edge of Band Emissions 2.1051 Spurious Emissions at Antenna COMPLIES Terminals 2.1053 Field Strength of Spurious Radiation COMPLIES 1. COMPLIES - Passed all applicable tests. 2. N/A – Not Applicable. 3. NT – Not Tested. 1.6 Test Configuration for all Antenna Port Measurements. PUBLIC Page 8 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 2. FCC Section 2.1046 - RF Power Output 2.1 RF Power Output This test is a measurement of the total RF power level transmitted at the antenna-transmitting terminal. The product was configured for test as shown in section 1.6 above and allowed to warm up and stabilize per KDB 971168 D01 and ANSI C63.26. Power measurements were made with a broadband Power Meter in the average mode. Before the testing was started, the Base Station was given a sufficient “warm-up” period as required. NOTE: Only a sample of all the plots taken have been used in this report. The full suite of raw data resides at the MH, New Jersey location. Channel RF Power Tabular Data - NB-IoT at Low Guard Band Modulation Bandwidth Bandwidth Bandwidth 10 MHz 15 MHZ 20 MHz Channel RF Power Channel RF Power Channel RF Power MHz dBm MHz dBm MHz dBm 64QAM 2115 21.24 2117.5 20.99 2120 20.70 2150 20.92 2147.5 20.87 2145 20.80 QPSK+16QAM 2115 20.80 2117.5 2079 2120 20.88 2150 20.80 2147.5 20.84 2145 21.23 Channel RF Power Tabular Data - NB-IoT at High Guard Band Modulation Bandwidth Bandwidth Bandwidth 10 MHz 15 MHZ 20 MHz Channel RF Power Channel RF Power Channel RF Power MHz dBm MHz dBm MHz dBm 64QAM 2115 21.21 2117.5 21.04 2120 20.74 2150 21.05 2147.5 21.05 2145 20.86 QPSK+16QAM 2115 21.07 2117.5 21.09 2120 20.73 2150 20.91 2147.5 20.74 2145 20.97 PUBLIC Page 9 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 2.1.1 Channel RF Power - Plots. 10MHz 64QAM-Lower 10MHz QPSK+16QAM - Upper 15MHz 64QAM-Lower 15MHz QPSK+16QAM - Upper 20MHz 64QAM-Lower 20MHz QPSK+16QAM - Upper PUBLIC Page 10 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 3. FCC Section 2.1047 - Modulation Characteristics 3.1 Modulation Characteristics The RF signal at the antenna port was demodulated and verified for correctness of the modulation signal used before each test was performed. For these products the operation with QPSK, 16QAM and 64QAM modulation was evaluated and verified. NOTE: Only a sample of all the data taken have been used in this report. The full suite of raw data resides at the MH, New Jersey location. 3.1.1 Modulation Characteristics – Plots. 64QAM QPSK+16QAM PUBLIC Page 11 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 4. FCC Section 2.1049 – Occupied Bandwidth 4.1 Occupied Bandwidth In 47CFR 2.1049 the FCC requires: “The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission shall be measured under the following conditions as applicable.” This required measurement is the 99% Occupied Bandwidth, also called the designated signal bandwidth and needs to be within the parameters of the products specified emissions designator. The -26 dB bandwidth values were also recorded. During these measurements it is customary to evaluate the Edge of Band emissions at block/band edges. The transmitted signal occupied bandwidth was measured using a Keysight MXA Signal Analyzer. All emissions were within the parameters as previously filed. Sample Charts are below. Occupied Bandwidth Tabular Data - NB-IoT at Low Guard Band Modulation Bandwidth Bandwidth Bandwidth 10 MHz 15 MHZ 20 MHz Channel OBW Channel OBW Channel OBW MHz MHz MHz MHz MHz MHz 64QAM 2115 9.1495 2117.5 13.625 2120 18.196 2150 9.1431 2147.5 13.623 2145 18.194 QPSK+16QAM 2115 9.1580 2117.5 13.626 2120 18.170 2150 9.1610 2147.5 13.614 2145 18.176 Occupied Bandwidth Tabular Data - NB-IoT at High Guard Band Modulation Bandwidth Bandwidth Bandwidth 10 MHz 15 MHZ 20 MHz Channel OBW Channel OBW Channel OBW MHz MHz MHz MHz MHz MHz 64QAM 2115 9.1432 2117.5 13.616 2120 18.189 2150 9.1527 2147.5 13.626 2145 18.212 QPSK+16QAM 2115 9.1302 2117.5 13.618 2120 18.180 2150 9.1413 2147.5 13.614 2145 18.213 PUBLIC Page 12 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 4.1.1 Occupied Bandwidth – Plots. 10MHz 64QAM-Lower 10MHz QPSK+16QAM - Upper 15MHz 64QAM-Lower 15MHz QPSK+16QAM - Upper 20MHz 64QAM-Lower 20MHz QPSK+16QAM - Upper PUBLIC Page 13 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 4.2 Occupied Bandwidth/ Edge of band Emissions The Edge of Band emissions of the EUT at the external antenna connector (EAC) were measured using a Keysight MXA Signal Analyzer. The RF power level was continuously measured using a RF broadband power meter. The RF output from the EAC port to spectrum analyzer was reduced (to an amplitude usable by the spectrum analyzer) by using a calibrated attenuator and test coupler. The path attenuation was offset on the display and the signal for single carrier was adjusted to the corrected RF power level for the resolution bandwidth used for the transmit signal. All mask values were adjusted based upon the designated signal bandwidth and measurement bandwidths. The Top of Mask corresponds to the set rated power level as confirmed by the RF power meter. 4.2.1 Occupied Bandwidth Results. The Occupied Bandwidth was measured for all three modulations, at each signal bandwidth and at left center and right side of band. The mask on the plots meet the Block Edge requirements as specified in 47CFR 27.53. All of the measurements met the requirements of Part 27.53 when measured per Part 2.1049. NOTE: Only a sample of all the data taken have been used in this report. The full suite of data resides at the MH, New Jersey location. PUBLIC Page 14 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 4.2.2 Edge of band Emissions - Plots. 10MHz 64QAM-Lower 10MHz QPSK+16QAM - Upper 15MHz 64QAM-Lower 15MHz QPSK+16QAM - Upper 20MHz 64QAM-Lower 20MHz QPSK+16QAM - Upper PUBLIC Page 15 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 5. FCC Section 2.1051 - Spurious Emissions at Transmit Antenna Port 5.1 Measurement of Spurious Emissions at Transmit Antenna Port Spurious Emissions at the transmit-antenna terminals were investigated over the frequency range of 10 MHz to beyond the 10th harmonic of the specific transmit band. For this band of operation, the measurements were performed up to 22 GHz. Measurements were made using a Keysight MXA Signal Analyzer. The RF output from the transmitter was reduced (to an amplitude usable by the receivers) using calibrated attenuators. The RF power level was continuously monitored via a coupled RF Power Meter. The required emission limitation is specified as appropriate in 27.53. The measured spurious emission levels were plotted for the frequency range as specified in 2.1057. There were no reportable emissions. Data below documents performance up to 22 GHz. NOTE: Only a sample of all the data taken have been used in this report. The full suite of raw data resides at the MH, New Jersey location. PUBLIC Page 16 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 5.1.1 Plots – Spurious Emissions at Tx Port 2115MHz, 10MHZ, 64QAM PUBLIC Page 17 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 2117.5MHz, 15MHZ, QPSK+16QAM PUBLIC Page 18 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 2145MHz, 20MHZ, 64QAM PUBLIC Page 19 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell Photographs PUBLIC Page 20 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell Test Equipment Asset ID Manufacturer Type Description Model Serial Calibration Date Calibration Due Calibration Type Status Agilent MXA Signal Requires E831 20Hz-26.5GHz N9020A MY48011791 2018-02-15 2020-02-15 Active Technologies Analyzer Calibration Bilogical Bilog Antenna Calibration Not E415 Schaffner-Chase CBL6140A 1154 Active Antenna 20MHz-2GHz Required PUBLIC Page 21 of 23

FCC Test Report Global Product Compliance Laboratory Report No.: TR-2018-0188-FCC2-27 Product: TMO SOHO V2 B2/B4 SS2FII-Femtocell 6. FCC Section 2.1053 6.1 Section 2.1053 Field Strength of Spurious Emissions Field strength measurements of radiated spurious emissions were made in 3m Semi-Anechoic Chambers the of Global Product Compliance Laboratories of Nokia Bell Labs in Murray Hill NJ. A complete description and full measurement data for the site is on file with the Commission (FCC File 515091). The spectrum from 30 MHz to beyond the tenth harmonic of the carrier, 22 GHz, was searched for spurious radiation. Measurements were made using both horizontally and vertically polarized broadband antennas. Per FCC regulations, the comparison of out of band spurious emissions directly to the limit is appropriately made using the substitution method. However, when the emissions are more than 20 dB below the specification limit, the use of field strength measurements for compliance determination is acceptable and those emissions are considered not reportable (Section 2.1053 and the FCC Interpretive database for 2.1053). For this case the evaluation of acceptable radiated field strength is as follows. 6.2 Field Strength of Spurious Emissions - Limits Sections 2.1053 and 27.53 contain the requirements for the levels of spurious radiation as a function of the level of the unmodulated carrier. The reference level for the unmodulated carrier is calculated as the field produced by an ideal dipole excited by the transmitter output power according to the following relation taken from Reference Data for Radio Engineers, page 676, 4th edition, IT&T Corp. E= [(30*P)1/2]/R 20 log (E*106) – (43 + 10 log P) = 82.23 dBV/meter Where: E = Field Intensity in Volts/meter P = Transmitted Power in Watts R = Measurement distance in meters = 3 m The Part 27 Limit is 82.23 dBuV/m at 3m and 91.77 dBuV/m at 1m The Part 27 non-report level is 62.23 dBuV/m at 3m. The calculated emission levels were found by: Measured level (dBV) + Cable Loss(dB)+Antenna Factor(dB) = Field Strength (dBV/m) RESULTS: For compliance with 47CFR Parts 2 and 27, the field strength of any spurious radiation, measured at 3m, is required to be less than 82.23 dBV/meter (82.23 @ 3m). Emissions equal to or less than 62.23 dBV/meter at 3m are not reportable and may be verified using field strength measurements and broadband antennas. Over the out of band spectrum investigated from 30 MHz to beyond the tenth harmonic of the carrier (up to 22 GHz), no reportable spurious emissions were detected. PUBLIC Page 22 of 23

United States Department of Commerce National Institute of Standards and Technology viad Certificate of Accreditation to ISO/IEC 17025:2005 NVLAP LAB CODE: 100275—0 Nokia, Global Product Compliance Lab MurrayHill, NJ is accredted by the Natlonal Voluntary Laboratory Accreditation Program for specife services listed on the Scape of Accreditaton, for: Electromagnetic Compatibility & Telecommunications This laboratory is accredited in accordance with the recognized Interational Standard ISOIEC 170252005 This accredietion demonstrates technical competence for a defined scope and the operation ofa laboratory qualty management system (refer tojont 1S0—ILAG—IAF Communique dated January 2008) 2017—08—17 through 2018—09—30 TietreDaes (es B°: ‘ : — gu C 0o [/ [ P ZW/‘A/ FortaNatiral Velatin Inicralonfecredtaten Frogam Pmest buge eo vi ce


Document Created: 2018-10-11 06:38:12
Document Modified: 2018-10-11 06:38:12
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC