Test Report (DTS-BT LE) rev

FCC ID: H8NCDR8011

Test Report

Download: PDF
FCCID_4496843

FCC Test Report Report No.: RF190530C17B-4 FCC ID: H8NCDR8011 Test Model: CDR8010-DBB1 Series Model: CDR8011-DBA1, CDR8011-DDA1, CDR8011-DDB1, CDR8011-SBA1, CDR8011-SBB1, CDR8011-SDA1, CDR8011-SDB1 (refer to item 3.1 for more details) Received Date: Feb. 25, 2019 Test Date: Apr. 25 ~ Aug. 28, 2019 Issued Date: Sep. 02, 2019 Applicant: ASKEY COMPUTER CORP. Address: 10F, NO. 119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190530C17B-4 Page No. 1 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards ........................................................................................ 10 4 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission and Bandedge Measurement.............................................................................. 11 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................... 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures................................................................................................................................. 13 4.1.4 Deviation from Test Standard ............................................................................................................ 13 4.1.5 Test Setup .......................................................................................................................................... 14 4.1.6 EUT Operating Conditions................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 6dB Bandwidth Measurement ........................................................................................................... 21 4.2.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 21 4.2.2 Test Setup .......................................................................................................................................... 21 4.2.3 Test Instruments ................................................................................................................................ 21 4.2.4 Test Procedure .................................................................................................................................. 21 4.2.5 Deviation fromTest Standard ............................................................................................................. 21 4.2.6 EUT Operating Conditions................................................................................................................. 21 4.2.7 Test Result ......................................................................................................................................... 22 4.3 Conducted Output Power Measurement........................................................................................... 23 4.3.1 Limits of Conducted Output Power Measurement ............................................................................ 23 4.3.2 Test Setup .......................................................................................................................................... 23 4.3.3 Test Instruments ................................................................................................................................ 23 4.3.4 Test Procedures................................................................................................................................. 23 4.3.5 Deviation from Test Standard ............................................................................................................ 23 4.3.6 EUT Operating Conditions................................................................................................................. 23 4.3.7 Test Results ....................................................................................................................................... 23 4.4 Power Spectral Density Measurement .............................................................................................. 24 4.4.1 Limits of Power Spectral Density Measurement ................................................................................ 24 4.4.2 Test Setup .......................................................................................................................................... 24 4.4.3 Test Instruments ................................................................................................................................ 24 4.4.4 Test Procedure .................................................................................................................................. 24 4.4.5 Deviation from Test Standard ............................................................................................................ 24 4.4.6 EUT Operating Condition .................................................................................................................. 24 4.4.7 Test Results ....................................................................................................................................... 25 4.5 Conducted Out of Band Emission Measurement .............................................................................. 26 4.5.1 Limits of Conducted Out of Band Emission Measurement................................................................ 26 4.5.2 Test Setup .......................................................................................................................................... 26 4.5.3 Test Instruments ................................................................................................................................ 26 4.5.4 Test Procedure .................................................................................................................................. 26 4.5.5 Deviation from Test Standard ............................................................................................................ 26 4.5.6 EUT Operating Condition .................................................................................................................. 26 Report No.: RF190530C17B-4 Page No. 2 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.5.7 Test Results ....................................................................................................................................... 26 5 Pictures of Test Arrangements .......................................................................................................... 28 Appendix – Information of the Testing Laboratories ................................................................................. 29 Report No.: RF190530C17B-4 Page No. 3 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

Release Control Record Issue No. Description Date Issued RF190530C17B-4 Original release. Sep. 02, 2019 Report No.: RF190530C17B-4 Page No. 4 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

1 Certificate of Conformity Product: iDVR800 Brand: ASKEY Test Model: CDR8010-DBB1 Series Model: CDR8011-DBA1, CDR8011-DDA1, CDR8011-DDB1, CDR8011-SBA1, CDR8011-SBB1, CDR8011-SDA1, CDR8011-SDB1 (refer to item 3.1 for more details) Sample Status: Engineering sample Applicant: ASKEY COMPUTER CORP. Test Date: Apr. 25 ~ Aug. 28, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Sep. 02, 2019 Pettie Chen / Senior Specialist Approved by : , Date: Sep. 02, 2019 Bruce Chen / Project Engineer Report No.: RF190530C17B-4 Page No. 5 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause 15.207 AC Power Conducted Emission NA EUT is powered from DC 15.205 / Meet the requirement of limit. Radiated Emissions and Band Edge 15.209 / Pass Minimum passing margin is -7.6dB at Measurement 15.247(d) 30.00MHz. 15.247(d) Antenna Port Emission Pass Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth Pass Meet the requirement of limit. 15.247(b) Conducted power Pass Meet the requirement of limit. 15.247(e) Power Spectral Density Pass Meet the requirement of limit. Antenna connector is I-PEX not a 15.203 Antenna Requirement Pass standard connector. Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) 9kHz ~ 30MHz 3.04 dB Radiated Emissions up to 1 GHz 30MHz ~ 200MHz 3.59 dB 200MHz ~ 1000MHz 3.60 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190530C17B-4 Page No. 6 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

3 General Information 3.1 General Description of EUT Product iDVR800 Brand ASKEY Test Model CDR8010-DBB1 CDR8011-DBA1, CDR8011-DDA1, CDR8011-DDB1, CDR8011-SBA1, Series Model CDR8011-SBB1, CDR8011-SDA1, CDR8011-SDB1 Model Difference Refer to Note Sample Status Engineering sample 12Vdc / 24Vdc (Car Charger) Nominal Voltage 3.7Vdc (Battery) Modulation Type GFSK Transfer Rate 1Mbps Operating Frequency 2402~2480MHz Number of Channel 40 Channel Spacing 2MHz Output Power 2.275mW Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Car charger, SD Card Cable Supplied NA Note: 1. All models are listed as below. Model CDR8010-DBB1 is the representative for final test. Model PCB Camera NFC Fan eSIM RAM CDR8010-DBB1 Yes Yes 3GB CDR8011-DBA1 Yes Yes N/A Dual CDR8011-DDA1 Yes No N/A CDR8011-DDB1 Yes No 3GB Same PCB N/A CDR8011-SBA1 Yes Yes N/A CDR8011-SBB1 Yes Yes 3GB Single CDR8011-SDA1 Yes No N/A CDR8011-SDB1 Yes No 3GB Report No.: RF190530C17B-4 Page No. 7 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

2. The following antennas were provided to the EUT. Antenna Type PIFA Connector Type I-PEX Brand WHAYU Model C407-510916-A Antenna gain (dBi) 2400MHz 2450MHz 2500MHz 5150MHz 5350MHz 5725MHz 5825MHz 1.32 -0.68 -0.46 3.39 -0.04 3.44 2.40 3. The EUT is powered by the following car charger and battery. Car charger Brand Sunny Model SYD1202-1005 Input Power 12Vdc / 24Vdc, 1.5A Output Power 5Vdc, 2.1A Power Line 5.1m cable with USB Type C connector Battery Brand FUJI ELECTRONICS(SHENZHEN)CO., LTD Model ICP463048XS Rating 3.7Vdc, 750mA 4. Spurious emission of the simultaneous operation (WWAN+WLAN 2.4GHz, WWAN+WLAN 5.0GHz, WWAN+BT) have been evaluated and no non-compliance was found. 3.2 Description of Test Modes 40 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF190530C17B-4 Page No. 8 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G PLC APCM - √ √ Note 2 √ - Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Note: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane. 2. No need to concern of PLC due to the EUT is powered from DC. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Technology Data Rate (Mbps) Mode - 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Technology Data Rate (Mbps) Mode - 0 to 39 39 GFSK 1 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Technology Data Rate (Mbps) Mode - 0 to 39 0, 19, 39 GFSK 1 Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 22 deg. C, 68% RH 3.7Vdc Greg Lin RE<1G 22 deg. C, 68% RH 3.7Vdc Greg Lin APCM 25 deg. C, 60% RH 3.7Vdc Frank Liu Report No.: RF190530C17B-4 Page No. 9 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Car Charger Sunny SYD1202-1005 NA NA Accessory of EUT B. Battery YUASA ST-CLN126-6S NA NA - Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. Type C to car charger 1 5.1 N 0 Accessory of EUT 2. DC cable 1 1 N 0 - 3.3.1 Configuration of System under Test (1) Car Charger (A) USB EUT (2) Battery (B) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190530C17B-4 Page No. 10 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF190530C17B-4 Page No. 11 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.1.2 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESCI 100424 Jan. 03, 2019 Jan. 02, 2020 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Sep. 25, 2018 Sep. 24, 2019 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-160 Nov. 21, 2018 Nov. 20, 2019 SCHWARZBECK HORN Antenna BBHA 9120 D 9120D-1169 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Loop Antenna Jun. 14, 2018 Jun. 13, 2019 HLA 6121 45745 TESEQ Jul. 01, 2019 Jun. 30, 2020 Preamplifier Aug. 08, 2018 Aug. 07, 2019 Agilent 8447D 2944A10638 Jul. 11, 2019 Jul. 10, 2020 (Below 1GHz) Preamplifier Agilent 8449B 3008A02367 Feb. 19, 2019 Feb. 18, 2020 (Above 1GHz) RF signal cable SUCOFLEX 104 & CABLE-CH9-02 Jan. 19, 2019 Jan. 18, 2020 HUBER+SUHNER&EMCI EMC104-SM-SM8000 (248780+171006) RF signal cable Aug. 08, 2018 Aug. 07, 2019 SUCOFLEX 104 CABLE-CH9-(250795/4) HUBER+SUHNER Jul. 11, 2019 Jul. 10, 2020 RF signal cable Jul. 31, 2018 Jul. 30, 2019 8D-FB Cable-CH9-01 Woken Jul. 30, 2019 Jul. 29, 2020 Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower 2070/2080 512.835.4684 NA NA EMCO Turn Table 2087-2.03 NA NA NA EMCO Antenna Tower &Turn AT100 AT93021705 NA NA BV ADT Turn Table TT100 TT93021705 NA NA BV ADT Turn Table Controller SC100 SC93021705 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA USB Wideband Power MY55050005/MY551900 Jul. 17, 2018 Jul. 16, 2019 Sensor U2021XA 04/MY55190007/MY5521 KEYSIGHT 0005 Jul. 15, 2019 Jul. 14, 2020 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 9. Report No.: RF190530C17B-4 Page No. 12 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 3 x RBW (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190530C17B-4 Page No. 13 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF190530C17B-4 Page No. 14 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190530C17B-4 Page No. 15 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.1.7 Test Results Above 1GHz Data: CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 56.6 PK 74.0 -17.4 2.17 H 237 24.8 31.8 2 2390.00 44.4 AV 54.0 -9.6 2.17 H 237 12.6 31.8 3 *2402.00 97.1 PK 2.25 H 230 65.3 31.8 4 *2402.00 92.5 AV 2.25 H 230 60.7 31.8 5 4804.00 45.0 PK 74.0 -29.0 2.83 H 134 41.3 3.7 6 4804.00 31.7 AV 54.0 -22.3 2.83 H 134 28.0 3.7 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 56.4 PK 74.0 -17.6 1.03 V 216 24.6 31.8 2 2390.00 44.4 AV 54.0 -9.6 1.03 V 216 12.6 31.8 3 *2402.00 92.0 PK 1.00 V 211 60.2 31.8 4 *2402.00 87.1 AV 1.00 V 211 55.3 31.8 5 4804.00 44.2 PK 74.0 -29.8 1.53 V 239 40.5 3.7 6 4804.00 31.1 AV 54.0 -22.9 1.53 V 239 27.4 3.7 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF190530C17B-4 Page No. 16 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 97.0 PK 2.49 H 228 65.2 31.8 2 *2440.00 92.1 AV 2.49 H 228 60.3 31.8 3 4880.00 45.1 PK 74.0 -28.9 2.81 H 136 41.6 3.5 4 4880.00 31.7 AV 54.0 -22.3 2.81 H 136 28.2 3.5 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 91.8 PK 1.03 V 206 60.0 31.8 2 *2440.00 87.0 AV 1.03 V 206 55.2 31.8 3 4880.00 44.2 PK 74.0 -29.8 1.62 V 247 40.7 3.5 4 4880.00 30.8 AV 54.0 -23.2 1.62 V 247 27.3 3.5 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF190530C17B-4 Page No. 17 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 96.5 PK 2.75 H 225 64.7 31.8 2 *2480.00 91.8 AV 2.75 H 225 60.0 31.8 3 2483.50 56.5 PK 74.0 -17.5 2.64 H 217 24.7 31.8 4 2483.50 44.7 AV 54.0 -9.3 2.64 H 217 12.9 31.8 5 4960.00 45.5 PK 74.0 -28.5 2.76 H 143 41.7 3.8 6 4960.00 32.1 AV 54.0 -21.9 2.76 H 143 28.3 3.8 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 91.4 PK 1.04 V 207 59.6 31.8 2 *2480.00 86.7 AV 1.04 V 207 54.9 31.8 3 2483.50 56.1 PK 74.0 -17.9 1.07 V 213 24.3 31.8 4 2483.50 44.2 AV 54.0 -9.8 1.07 V 213 12.4 31.8 5 4960.00 44.6 PK 74.0 -29.4 1.62 V 243 40.8 3.8 6 4960.00 31.3 AV 54.0 -22.7 1.62 V 243 27.5 3.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF190530C17B-4 Page No. 18 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

Below 1GHz worst-case data: DETECTOR CHANNEL TX Channel 39 Quasi-Peak (QP) FUNCTION FREQUENCY RANGE 9kHz ~ 1GHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.00 27.3 QP 40.0 -12.7 1.00 H 355 38.7 -11.4 2 155.13 18.8 QP 43.5 -24.7 1.25 H 17 28.0 -9.2 3 450.01 28.1 QP 46.0 -17.9 1.00 H 96 32.6 -4.5 4 591.63 27.9 QP 46.0 -18.1 1.50 H 54 30.1 -2.2 5 818.61 31.8 QP 46.0 -14.2 1.25 H 131 30.1 1.7 6 916.58 33.2 QP 46.0 -12.8 1.00 H 18 29.5 3.7 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190530C17B-4 Page No. 19 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

DETECTOR CHANNEL TX Channel 39 Quasi-Peak (QP) FUNCTION FREQUENCY RANGE 9kHz ~ 1GHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.00 32.4 QP 40.0 -7.6 1.50 V 61 43.8 -11.4 2 58.13 27.2 QP 40.0 -12.8 1.00 V 184 37.6 -10.4 3 135.73 24.9 QP 43.5 -18.6 1.25 V 133 35.2 -10.3 4 520.82 26.0 QP 46.0 -20.0 1.25 V 35 29.4 -3.4 5 729.37 35.0 QP 46.0 -11.0 1.00 V 70 35.0 0.0 6 935.98 33.4 QP 46.0 -12.6 1.50 V 338 29.5 3.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190530C17B-4 Page No. 20 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.2 6dB Bandwidth Measurement 4.2.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.2.2 Test Setup Spectrum EUT Attenuator Analyzer 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz. b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. 4.2.5 Deviation fromTest Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190530C17B-4 Page No. 21 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.2.7 Test Result 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 0 2402 0.68 0.5 Pass 19 2440 0.67 0.5 Pass 39 2480 0.67 0.5 Pass Spectrum Plot of Worst Value Report No.: RF190530C17B-4 Page No. 22 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.3 Conducted Output Power Measurement 4.3.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.3.2 Test Setup EUT Power Meter Attenuator 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures For Peak Power A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions Same as item 4.3.6. 4.3.7 Test Results For Peak Power Channel Frequency (MHz) Peak Power (mW) Peak Power (dBm) Limit (dBm) Pass/Fail 0 2402 1.578 1.98 30 Pass 19 2440 2.275 3.57 30 Pass 39 2480 1.706 2.32 30 Pass For Average Power Channel Frequency (MHz) Average Power (mW) Average Power (dBm) 0 2402 1.403 1.47 19 2440 2.070 3.16 39 2480 1.432 1.56 Report No.: RF190530C17B-4 Page No. 23 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.4 Power Spectral Density Measurement 4.4.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm/3kHz. 4.4.2 Test Setup Spectrum EUT Attenuator Analyzer 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Condition Same as item 4.3.6 Report No.: RF190530C17B-4 Page No. 24 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.4.7 Test Results Channel Freq. (MHz) PSD (dBm/3kHz) Limit (dBm/3kHz) Pass / Fail 0 2402 -14.09 8 Pass 19 2440 -12.69 8 Pass 39 2480 -13.43 8 Pass Spectrum Plot of Worst Value Report No.: RF190530C17B-4 Page No. 25 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

4.5 Conducted Out of Band Emission Measurement 4.5.1 Limits of Conducted Out of Band Emission Measurement Below -20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.5.2 Test Setup Spectrum EUT Attenuator Analyzer 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure Measurement Procedure REF a. Set the RBW = 100 kHz. b. Set the VBW ≥ 300 kHz. c. Detector = peak. d. Sweep time = auto couple. e. Trace mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure OOBE a. Set RBW = 100 kHz. b. Set VBW ≥ 300 kHz. c. Detector = peak. d. Sweep = auto couple. e. Trace Mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum amplitude level. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as item 4.3.6 4.5.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF190530C17B-4 Page No. 26 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

CH 0 CH 19 CH 39 CH 0 Band edge CH 39 Band edge Report No.: RF190530C17B-4 Page No. 27 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190530C17B-4 Page No. 28 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190530C17B-4 Page No. 29 / 29 Report Format Version: 6.1.1 Reference No.: 190704C29


Document Created: 2019-10-31 04:11:39
Document Modified: 2019-10-31 04:11:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC