05.) Manual.pdf

FCC ID: G6DGF21HH2

Users Manual

Download: PDF
FCCID_2694519

                                                WNEAmLu)NW
                                                NOT RECOMMENDED FOR CHILOREN UNDER 8 YEARS5 OF AGE AS MTH
                                                   L ELECTRIC PRODUCTS, PRECAVTIONS SHOULD BE OBSERVED
                                                DURING HANDLING AND USE T0 PREVENT ELECTAIC SHOCK
                                                INPYT: 120V AC 608z 250mA. OUTPUT: 144¥ DC 500mA.


   iNEW/ BRIGHT}                      M“'“"\                             ** *t8 CCRR           «&   llw




 OW NER‘S MANUAL
         Please read and understand all precautions prior to use.

      Thank you for choosing a premium New Bright product.
      Model / Modéle No.:
      Remote : GF21HH2 / GF21KHHO
      Toy Vehicle : GFO630                            USA and Canada
                                                  30—day Limited Warranty

New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and
workmanship for thirty (30) days from the date of purchase. in the event of such a defect within the warranty period New
Bright will repair or replace the product, at our sole discretion. This warranty does not cover damage resulting from
unauthorized modifications, accident, misuse, or abuse.

Should your item have a defect covered under this warranty, first call the toll free numberlisted below. Most problems can
be resolved in this manner. If necessary, you will be issued a return authorization (RA) number, and instructed on how to
obtain a Product Return Form. The Product is to be used when returning product to us (postage pre—paid and insured by
the consumer).

When returning a defective product, please package the product, the Product Return Form and a copy of the dated sales
receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned
without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery
of repaired or replacement vehicle (depending on your location).

New Sright Industries‘ liability for defects in material and workmanship under this warranty shall be limited to repair or
replacement, at our sole discretion, and in no event shall we be responsible for incidental, consequential, or contingent
damages (except in those states that do not allow this exclusion or limitation}).

                                               Valid only in U.S.A. and Canada

                                        Contact New Bright Ind. Customer Service at
                                                           Toll Free
 c € 1 79 7                                            1—877—624—8697
                                            M—F 8:00AM to 5:00PM Eastern Time
                                                                                                     L575108679/JN186—14
                                 |



                                             |


New Bright
                                                                                      _“.’-..'.'.


yxaxz~: Table of:—Contents:
"a ie e * *                           4                 +    (he y               I    T*            '.,‘i',:é



        FFi                 h   T :-.;:‘n-\..:_"-.'! Pe _' -V‘] t    rAs   D¥€       e m4   f:}‘g         24
              $ wit .
              C % c
                        T
                                                                                                    :“?f:'{




 Section 1:                               Table of Contents
 Section 2:                               Component Checklist
 Section 3:                               Removing Demo Wire
 Section 4:                               Charging the Battery
 Section 5:                               Battery Installation in Vehicle
 Section 6:                               Vehicle Features and Functions
                                          Vehicle Antenna Placement

 Section 7:                               Transmitter Battery Installation
 Section 8:                               Transmitter Features and Functions
                                          Transmitter Antenna Placement

 Section 9:                               Proper Use
                                          Precautions and Care

 Section 10:                              Trouble Shooting and Support
 Section 11:                              Caution


New Bright


    New Bright
                                                                                  E       —atl
                                                                           P L4       x
                              =                                        &              y Jt

           «Removin
           s
          Wls
                  146                      ?De
                                             &   5
                                               O P
                                           asédbrerteliaut rurri6h;>
                                                                            WIB
                                                                            C
          + yugier + *                 L5 pl w n +03       oha i Bs   iWt 1+ 2e       Hks,




This vehicle is shipped with a demo wire which runs from the transmitter to the vehicle
chassis. The wire is for .. ckage demonstration only and should be removed and
discarded as shown here.

1. Unlock and remove battery.




2. Remove demo wire                  on
   from chassis.
  Grasp wire and pull in          l:
  a straight outward
  direction.




3. Remove and discard the
   demo wire which runs from
   the vehicle to the transmitter.




                         ‘                             ®                                         BaAs


           Battery




                                                                                                       #eT5
            »Chargingthe.Bat
                                       IMPORTANT!
The included 12.8V Lithium lon battery pack is only PARTIALLY CHARGED prior to shipment
             and it is recommended the battery be fully charged before first use.




                  Charging
                 Status Light



                                                     —— Push and Hold Button
                                         &                     To Remove Battery


                                                               12.8V Lithium lon
                                                                  Battery Pack



1. Plug the Charger into a standard indoor electrical outlet. This power unit is intended to be
   correctly orientated in a vertical or wall mount position.
2. Insert the 12.8V rechargeable battery pack securely into the charger (as shown above). Be sure
   the arrows are properly matched.
3. When battery pack is properly inserted and charging unit is plugged into the outlet, the charging
   status light will turn on, indicating the battery is charging. After approximately one hour of
   charging the light will turn off, indicating that the battery is fully charged.
4. Charge will last approximately 10—12 minutes depending on terrain and driving style.


  PORTANT: It is normal for the battery pack to become warm after charging and/or use. Be sure
  ow the battery pack to cool before using or recharging. Recharging a warm battery pack will
    ly reduce the battery life.

ATTENTION PARENTS:
* The Battery Charger & Battery Pack need to be periodically examined for potential hazards. Any
  potentially hazardous parts need to be repaired or replaced.



                                                            alrehedr    Ris e .oWeinsskiees s cant&


H   ,          M{J a|(e [=




        Locate and align arrow on battery pack with arrow inside battery compartment.
        Place battery pack in battery compartment and slide battery forward in direction
        of arrow. Once in place, turn locking tab to keep battery pack secure.             k)


Vehicle




                             0  ON/OFF
                                 Switch




              Demo Wire
              Connection

            a ut wl niambemameeomm n




§Antenna—Placemeny


  Transmitter
           gBatteryInstallationB
Firmly press TAB in the direction of the
ARROW and pull back to open battery
compartment cover.


Install 2 "AA" batteries as shown, making sure
(+) and (—) markings on batteries line up with
the (+) and (—) markings in the battery
compartment.

Close battery compartment cover.
Cover should click when locked in place.
     when replacing .. _.:~:::.___r batteries
      e alkaline batteries only.
     Do not mix old and new batteries.
     Do not mix alkaline, standard or
     rechargeable batteries.




 START/MUTE SOUND:                                    VOICE:
 Press to hear                                        Press to hear
 sound. Press again                                   sound.
 for mute.




in sound mode sounds will continue until START/MUTE button is pressed or
vehicle is turned off. Press start to reactivate sounds.


   Transmitter




                      DRIVE                       DRIVE
                     FORWARD                     REVERSE

              FORWARD/REVERSE DRIVING
              Push BOTH joysticks forward for Forward Driving.
              Pull BOTH joysticks back to drive in Reverse.




   360° SPINS — Counter—Clockwise              360° SPINS — Clockwise
   Push both joysticks in opposite             Push both joysticks in opposite
   directions continuously as shown for        directions continuously as shown for
   Counter—Clockwise Spinning.                 Clockwise Spinning.

This vehicle has lights:
* When moves the joystick, the lights will turn on.
* When stopping movement, the lights will turn off.


             Trouble shooting & Support
 Problem — Vehicle does not move or moves slowly.
 — Make certain there are fresh batteries in the transmitter and that theyhave been
   installed in the correct position.
 — Are the (+) and (—) markings on the batteries in the same position as the (+) and (—)
   markings in the Transmitter Battery Compartment?
— Has the Battery Pack been installed in the vehicle?
— Has the rechargeable Battery Pack been fully charged?
— Are the (+) and (—) markings on the Battery Pack in the same position as the (+) and
  {—) markings in the Battery Compartment?
— Are the metal contact tabs touching, rusty ordirty in the transmitter?
— Make certain that the vehicle ON/OFF switch is in the "ON® position.

Problem — Vehicle moves by itselt or exhibits reduced range from the transmitter.
— Make certain there is no outside radio interference in your area. The best way to test
  this is to take the vehicle as far away from radio towers, electrical lines or tal
  buildings as possible to ensure no further radio interference will occur.




FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment.


NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
       FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
       installation. This equipment generates, uses and can radlate radio frequency energy and, if not installed and used in
       accordance with the instructions, may cause harmlul interference to radio communications. However, there is no guarantes
       that interference will not occur in a particular Installation. If this equipment does cause harmful interferance to radio or
       television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
       the interference by one or more of the following measures:

       +   Reorient or relocate the receiving antenna.
       —   Increase the separation between the equipment and receiver.
       —   Connect the equipment into an outfet on a circuit different from that to which the receiver is connected.
       —   Consult the dealer or an experienced radio/TV technician for help.


RSS Statement

This device complies with Industry Canada licence—exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de
licence. L‘exploitation est autorisée aux deux conditions suivantes : (1) l‘appareil ne doit pas produire de
brouillage, et (2) l‘utilisateur de l‘appareil doit accepter dout brouillage radioglectrique subi, méme si le
brouillage est susceptible d‘en compromettre le fonctionnement.

Due to low power design, this product is exempted from RF exposure or SAR evaluation and is safe for
intended use

En raison d‘une conception de faible puissance ce produit est exemptéaux RF on d‘evaluation SAR et sans danger &
l‘usage nromal


   New Bright

Do not recharge Battery Pack if it is hot or warm to the touch. Allow Battery
Pack to cool before recharging. Recharging a hot or warm Battery Pack will
shorten the life of the Pack.

Do not recharge a Battery Pack if it appears to be damaged or leaking.

Always unplug Charger when not in use.

Always remove Battery Pack from Battery Compartment when not in use.

Do not dispose batteries in fire. Leakage, explosion and personal injury may
occur.

Dispose of Lithium—lon Battery Pack properly.

Do not attempt to disassemble Battery Pack or Charger.

Do not use Battery Charger for any use other than instructed in this bookiet.

Only an adult should charge Batteries.

Do not attempt jumps or tricks with this vehicle.



Document Created: 2015-07-16 10:18:08
Document Modified: 2015-07-16 10:18:08

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC