Test Setup Photos

FCC ID: EWQ100TCP

Test Setup Photos

Download: PDF
FCCID_1874452

100t cp test setup photos page 1 of 6 Contents Comb Generator: .............................................................2 Double Ridge Waveguide 1 GHz to 9.28 GHz: ...................................2 Log periodic 200 MHz to 1 GHz: ..............................................3 Log periodic 200 MHz to 1 GHz: ..............................................3 Biconical 30 MHz to 200 MHz: ................................................4 Loop 9 KHz to 30 MHz ........................................................4 Loop 9 KHz to 30 MHz ........................................................5 Conducted measurements ......................................................5 100tcp photos test setup.docx rev a

100t cp test setup photos page 2 of 6 Comb Generator: Comb generator was used to check for correct sensitivity of measurement setup Double Ridge Waveguide 1 GHz to 9.28 GHz: Double Ridge Waveguide with pre amp, to increase sensitivity, used to measure unintended emissions above 1 GHz. 100tcp photos test setup.docx rev a

100t cp test setup photos page 3 of 6 Log periodic 200 MHz to 1 GHz: Log periodic with pre amp, to increase sensitivity, for low level emissions and low power band edge measurements. Log periodic 200 MHz to 1 GHz: Log periodic without pre amp, used to measure high power intended emissions and band edge measurements. 100tcp photos test setup.docx rev a

100t cp test setup photos page 4 of 6 Biconical 30 MHz to 200 MHz: Biconical with pre amp, for measurement of low power unintended emissions. Loop 9 KHz to 30 MHz Loop antenna used for measuring unintended emission below 30 MHz. 100tcp photos test setup.docx rev a

100t cp test setup photos page 5 of 6 Loop 9 KHz to 30 MHz Loop antenna used for measuring unintended emission below 30 MHz. Rotated to maximize emissions reading. Conducted measurements HP 8593E serial number 3543A02032 as used for all measurements, except time interval and some band edge measurements. 100tcp photos test setup.docx rev a

100t cp test setup photos page 6 of 6 Agilent E4440A serial number 3543A02032 as used for some band edge measurements. 100tcp photos test setup.docx rev a


Document Created: 2012-12-07 14:04:11
Document Modified: 2012-12-07 14:04:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC