Test Report_DCD

FCC ID: EMOHWL83N

Test Report

Download: PDF
FCCID_4059530

ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Wireless Charging Clock Speaker with Dual USB Charging Model No.: HWL83, HWL83N, HWL83X (X means A-Z, denote as color of cabinet) Trademark: iHome FCC ID: EMOHWL83N Report No.: ES180820024E2 Issue Date: September 21, 2018 Prepared for SDI TECHNOLOGIES INC. 1299, Main Street, Rahway, NJ 07065, U.S.A. Prepared by EMTEK(SHENZHEN) CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China. TEL: 86-755-26954280 FAX: 86-755-26954282 This report shall not be reproduced, except in full, without the written approval of EMTEK(SHENZHEN) CO., LTD. TRF No: FCC part 15C Page 1 of 24 Report No: ES180820024E2 Ver.1.0

VERIFICATION OF COMPLIANCE Applicant: SDI Technologies Inc. 1299, Main Street, Rahway, NJ 07065, U.S.A. Manufacturer: Hotel Technologies Inc. 1299, Main Street, Rahway, NJ 07065, U.S.A. Factory: Wing Hing Luen Electronics (Shenzhen) Co. Ltd. Feng Huang Road, Egongling, PingHu, Longgang, Shenzhen, China. Product Description: Wireless Charging Clock Speaker with Dual USB Charging Trade Mark: iHome HWL83, HWL83N, HWL83X (X means A-Z, denote as color of Model Number: cabinet)(Note: The samples are the same except difference color of appearance and model number, Here HWL83 was selected for full test.) We hereby certify that: The above equipment was tested by EMTEK(SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15C. Date of Test : August 20, 2018 to September 20, 2018 Prepared/Tested by : Yaping Shen/Editor Reviewer : Joe Xia/Supervisor Approved & Authorized Signer : Lisa Wang/Manager TRF No: FCC part 15C Page 2 of 24 Report No: ES180820024E2 Ver.1.0

Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / ES180820024E2 TRF No: FCC part 15C Page 3 of 24 Report No: ES180820024E2 Ver.1.0

Table of Contents 1 GENERAL INFORMATION................................................................................................................. 5 1.1 PRODUCT DESCRIPTION ........................................................................................................................ 5 1.2 RELATED SUBMITTAL(S) / GRANT(S)...................................................................................................... 6 1.3 TEST METHODOLOGY ............................................................................................................................ 6 1.4 SPECIAL ACCESSORIES ......................................................................................................................... 6 1.5 EQUIPMENT MODIFICATIONS ................................................................................................................. 6 1.6 TEST FACILITY ....................................................................................................................................... 6 2 SYSTEM TEST CONFIGURATION .................................................................................................. 7 2.1 EUT CONFIGURATION ........................................................................................................................... 7 2.2 EUT EXERCISE ..................................................................................................................................... 7 2.3 TEST PROCEDURE ................................................................................................................................. 7 2.4 CONFIGURATION OF TESTED SYSTEM ................................................................................................... 8 3 SUMMARY OF TEST RESULTS ...................................................................................................... 8 4 DESCRIPTION OF TEST MODES.................................................................................................... 9 4.1 MEASUREMENT PROCEDURE ............................................................................................................... 10 4.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................... 10 4.3 MEASUREMENT EQUIPMENT USED ...................................................................................................... 10 4.4 CONDUCTED EMISSION LIMIT .............................................................................................................. 10 4.5 MEASUREMENT RESULT ...................................................................................................................... 11 4.6 CONDUCTED MEASUREMENT PHOTO .................................................................................................. 14 5 RADIATED EMISSION TEST .......................................................................................................... 15 5.1 MEASUREMENT PROCEDURE ............................................................................................................... 15 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................... 15 5.3 MEASUREMENT EQUIPMENT USED ...................................................................................................... 16 5.4 RADIATED EMISSION LIMIT................................................................................................................... 16 5.5 MEASUREMENT RESULT ...................................................................................................................... 18 5.6 RADIATED MEASUREMENT PHOTOS .................................................................................................... 21 6 20DB BANDWIDTH.......................................................................................................................... 22 6.1 20DB BANDWIDTH LIMIT ...................................................................................................................... 22 6.2 TEST INSTRUMENTS ............................................................................................................................ 22 6.3 TEST PROCEDURE ............................................................................................................................... 22 6.4 TEST SETUP ........................................................................................................................................ 22 6.5 TEST RESULT ...................................................................................................................................... 22 7 ANTENNA APPLICATION .............................................................................................................. 24 7.1 ANTENNA REQUIREMENT ..................................................................................................................... 24 7.2 RESULT ............................................................................................................................................... 24 8 PHOTOS OF EUT ............................................................................................................................. 24 TRF No: FCC part 15C Page 4 of 24 Report No: ES180820024E2 Ver.1.0

1 General Information 1.1 Product Description Characteristics Description Product Name Wireless Charging Clock Speaker with Dual USB Charging Model number HWL83 Operation Mode Qi-5W Wireless Charging Input Rating DC 9V from adapter Power Supply AC120V/60Hz for adapter M/N: WHDOE-09035 Adapter Input: 100-240V~ 50/60Hz 0.65A Max Output: DC 9V 3.5A Operating Frequency 110-148KHz Modulation Technique Induction Antenna Type Induction coil Product Software Version HWL-83BT MAIN REV-3 Product Hardware version U23 Radio Software Version BT_BK6988V2.3P40.8M,WPT_V1.8.3.9 Radio Hardware version BT_V2.3,WPT_REV-00 TRF No: FCC part 15C Page 5 of 24 Report No: ES180820024E2 Ver.1.0

1.2 Related Submittal(s) / Grant(s) This submittal(s) (test report) is intended for FCC ID: EMOHWL83N filing to comply with the FCC Part 15, Subpart C Rules. 1.3 Test Methodology Both conducted and radiated testing was performed according to the procedures in ANSI C63.10 (2013). Radiated testing was performed at an antenna to EUT distance 3 meters. 1.4 Special Accessories Not available for this EUT intended for grant. 1.5 Equipment Modifications Not available for this EUT intended for grant. 1.6 Test Facility Site Description EMC Lab. : Accredited by CNAS, 2016.10.24 The certificate is valid until 2022.10.28 The Laboratory has been assessed and proved to be in compliance with CNAS-CL01:2006 (identical to ISO/IEC 17025:2005) The Certificate Registration Number is L2291. Accredited by TUV Rheinland Shenzhen 2016.5.19 The Laboratory has been assessed according to the requirements ISO/IEC 17025. Accredited by FCC, August 03, 2017 Designation Number: CN1204 Test Firm Registration Number: 882943 Accredited by Industry Canada, November 24, 2015 The Certificate Registration Number is 4480A. Accredited by A2LA, July 31, 2017 The Certificate Number is 4321.01. Name of Firm : EMTEK(SHENZHEN) CO., LTD. Site Location : Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China. TRF No: FCC part 15C Page 6 of 24 Report No: ES180820024E2 Ver.1.0

2 System Test Configuration 2.1 EUT Configuration The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner which intends to maximize its emission characteristics in a continuous normal application. 2.2 EUT Exercise The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. 2.3 Test Procedure 2.3.1 Conducted Emissions The EUT is a placed on as turn table which is 0.8 m above ground plane. According to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average detector mode. 2.3.2 Radiated Emissions The EUT is a placed on as turn table which is 0.8 m above ground plane. The turn table shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the max. emission, the fixed in a particular direction according to the requirements in Section 13.1.4.1 of ANSI C63.10-2013. TRF No: FCC part 15C Page 7 of 24 Report No: ES180820024E2 Ver.1.0

2.4 Configuration of Tested System Fig. 2-1 Configuration of Tested System iPhone Wireless Charger Receiver Module EUT AC Mains Table 2-1 Equipment Used in Tested System Item Equipment Trade Mark Model No. FCC ID Note Wireless Charging 1. Clock Speaker iHome HWL83 EMOHWL83N EUT with Dual USB Charging 2. Adapter N/A WHDOE-09035 N/A Support EUT 3. iPhone Apple A1524 N/A Support Equipment Wireless Charger 4. Universal N/A N/A Support Equipment Receiver Module Note: (1) Unless otherwise denoted as EUT in『Remark』column, device(s) used in tested system is a support equipment. 3 Summary of Test Results FCC Rules Description Of Test Result AC Power Conducted §15.207 Compliant Emission §15.209 Radiated Emission Compliant §2.1049 20dB Bandwidth Compliant §15.203 Antenna Requirement Compliant TRF No: FCC part 15C Page 8 of 24 Report No: ES180820024E2 Ver.1.0

4 Description of test modes Channel Frequency(KHz) Low frequency 110 Mid frequency 125 High frequency 148 TRF No: FCC part 15C Page 9 of 24 Report No: ES180820024E2 Ver.1.0

Conducted Emissions Test 4.1 Measurement Procedure 1. The EUT was placed on a table which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured was complete. 4.2 Test SET-UP (Block Diagram of Configuration) Test Receiver AC Mains L.I.S.N EUT 4.3 Measurement Equipment Used Conducted Emission Test Site EQUIPMENT MFR MODEL SERIAL Last Cal. Due date TYPE NUMBER NUMBER Test Receiver Rohde & Schwarz ESCS30 100018 05/16/2018 05/15/2019 L.I.S.N Rohde & Schwarz ENV216 100017 05/16/2018 05/15/2019 RF Switching CDS RSU-M2 38401 05/16/2018 05/15/2019 Unit Coaxial Cable CDS 79254 46107086 05/16/2018 05/15/2019 4.4 Conducted Emission Limit Conducted Emission Frequency(MHz) Quasi-peak Average 0.15-0.5 66-56 56-46 0.5-5.0 56 46 5.0-30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. TRF No: FCC part 15C Page 10 of 24 Report No: ES180820024E2 Ver.1.0

4.5 Measurement Result Operation Mode: TX Test Date : September 18, 2018 Frequency Range: 0.15MHz~30MHz Temperature : 28℃ Test Result: PASS Humidity : 65 % Test By: Yaping Shen Pass We pretested three modes (max load, mid load, min load) for EUT. The worst mode (max load) test data see follow the table. TRF No: FCC part 15C Page 11 of 24 Report No: ES180820024E2 Ver.1.0

TRF No: FCC part 15C Page 12 of 24 Report No: ES180820024E2 Ver.1.0

TRF No: FCC part 15C Page 13 of 24 Report No: ES180820024E2 Ver.1.0

4.6 Conducted Measurement Photo TRF No: FCC part 15C Page 14 of 24 Report No: ES180820024E2 Ver.1.0

5 Radiated Emission Test 5.1 Measurement Procedure 1. The EUT was placed on a turn table which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 4. Repeat above procedures until all frequency measured were complete. 5.2 Test SET-UP (Block Diagram of Configuration) (A) Radiated Emission Test Set-Up, Frequency Below 30MHz Turntable 3m EUT Test 0.8 m Receiver Ground Plane Coaxial Cable (B) Radiated Emission Test Set-Up, Frequency Below 1000MHz 3m Turntable 1m to 4m EUT Test Receiver 0.8m Ground Plane Coaxial Cable TRF No: FCC part 15C Page 15 of 24 Report No: ES180820024E2 Ver.1.0

5.3 Measurement Equipment Used Equipment Manufacturer Model No. Serial No. Last Cal. Due date Test Receiver Rohde & Schwarz ESCI 1166.5950.03 05/16/2018 05/15/2019 Signal Analyzer Rohde & Schwarz FSV30 103040 05/16/2018 05/15/2019 Loop Antenna Schwarzbeck FMZB 1519 012 05/16/2018 05/15/2019 Bilog Antenna Schwarzbeck VULB9163 000141 05/16/2018 05/15/2019 Power Amplifier CDS RSU-M352 818 05/16/2018 05/15/2019 Power Amplifier HP 8447F OPT H64 05/16/2018 05/15/2019 Color Monitor SUNSPO SP-140A N/A 05/16/2018 05/15/2019 Single Line Filter JIANLI XL-3 N/A 05/16/2018 05/15/2019 Single Phase Power JIANLI DL-2X100B N/A 05/16/2018 05/15/2019 Line Filter 3 Phase Power Line JIANLI DL-4X100B N/A 05/16/2018 05/15/2019 Filter DC Power Filter JIANLI DL-2X50B N/A 05/16/2018 05/15/2019 Cable Schwarzbeck PLF-100 549489 05/16/2018 05/15/2019 Cable Rosenberger CIL02 A0783566 05/16/2018 05/15/2019 Cable Rosenberger RG 233/U 525178 05/16/2018 05/15/2019 5.4 Radiated Emission Limit The emissions from an intentional radiator shall not exceed the field strength levels specified in the following table 15.209(a): FCC Part 15.209 Field Strength Field Strength Limitation Frequency tion at 3m Frequency Limitation Measurement Dist (MHz) (uV/m) Dist (uV/m) (dBuV/m) 0.009 – 0.490 2400 / F(KHz) 300m 10000 * 2400/F(KHz) 20log 2400/F(KHz) + 80 0.490 – 1.705 24000 / F(KHz) 30m 100 * 24000/F(KHz) 20log 24000/F(KHz) + 40 1.705 – 30.00 30 30m 100* 30 20log 30 + 40 30.0 – 88.0 100 3m 100 20log 100 88.0 – 216.0 150 3m 150 20log 150 216.0 – 960.0 200 3m 200 20log 200 Above 960.0 500 3m 500 20log 500 TRF No: FCC part 15C Page 16 of 24 Report No: ES180820024E2 Ver.1.0

15.205 Restricted bands of operation Remark: 1. Emission level in dBuV/m=20 log (uV/m) 2. Measurement was performed at an antenna to the closed point of EUT distance of meters. 3. Only spurious frequency is permitted to locate within the Restricted Bands specified in provision of  15.205, and the emissions located in restricted bands also comply with 15.209 limit. TRF No: FCC part 15C Page 17 of 24 Report No: ES180820024E2 Ver.1.0

5.5 Measurement Result We three modes (max load, mid load, min load) for EUT. The worst mode (max load) and worst test frequency(High frequency：146KHz)test data see follow the table. Operation Mode: Low frequency Test Date : September 18, 2018 Frequency Range: 9KHz~30MHz Temperature : 20℃ Test Result: PASS Humidity : 55 % Measured Distance: 3m Test By: Yaping Shen Freq. Ant.Pol. Emission Level Limit 3m Over Note (MHz) H/V (dBuV/m) (dBuV/m) (dB) 0.14635(F) H 75.63 104.30 -28.67 PK 0.2927 H 63.42 98.28 -34.86 PK 0.43905 H 63.15 94.75 -31.60 PK 0.5854 H 62.77 72.26 -9.49 PK 0.73175 H 61.65 70.32 -8.67 PK 0.14635(F) V 75.78 104.30 -28.52 PK 0.2927 V 64.26 98.28 -34.02 PK 0.43905 V 64.16 94.75 -30.59 PK 0.5854 V 64.53 72.26 -7.73 PK 0.73175 V 62.36 70.32 -7.96 PK Note: (1) All Readings are Peak Value. (2) Emission Level= Reading Level+Probe Factor +Cable Loss. (3) The average measurement was not performed when the peak measured data under the limit of average detection. (4) EUT lying on the table position is the worst case result in the report. We pretested three modes (max load, mid load, min load) for EUT. The worst mode (max load) and worst test frequency(High frequency：146KHz)test data see follow the page. TRF No: FCC part 15C Page 18 of 24 Report No: ES180820024E2 Ver.1.0

TRF No: FCC part 15C Page 19 of 24 Report No: ES180820024E2 Ver.1.0

TRF No: FCC part 15C Page 20 of 24 Report No: ES180820024E2 Ver.1.0

5.6 Radiated Measurement Photos TRF No: FCC part 15C Page 21 of 24 Report No: ES180820024E2 Ver.1.0

6 20db Bandwidth 6.1 20dB Bandwidth Limit None: for reporting purposed only. 6.2 Test Instruments Refer a test equipment and calibration data table in this test report. 6.3 Test Procedure The bandwidth of the fundamental frequency was measured by spectrum analyzer with 10Hz RBW and 30Hz VBW. The 20dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 20dB. 6.4 Test Setup EUT Spectrum Analyzer 6.5 Test Result Frequency 20dB Bandwidth Results (KHz) (Hz) 146.35 73.93 PASS TRF No: FCC part 15C Page 22 of 24 Report No: ES180820024E2 Ver.1.0

20 dB Bandwidth Test plot TRF No: FCC part 15C Page 23 of 24 Report No: ES180820024E2 Ver.1.0

7 Antenna Application 7.1 Antenna requirement For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. 7.2 Result The EUT’s antenna, permanent attached antenna, used an Induction coil and integrated on PCB, The antenna’s gain meets the requirement. 8 Photos of EUT Please refer to external photos.pdf and internal photos.pdf. TRF No: FCC part 15C Page 24 of 24 Report No: ES180820024E2 Ver.1.0


Document Created: 2018-10-30 09:54:03
Document Modified: 2018-10-30 09:54:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC