Users Manual

FCC ID: DWNVC

Users Manual

Download: PDF
FCCID_2364277

Thank you for purchasing this fine window treatment proudly constructed by us. Your shade has been custom-sized Mark screw locations; center additional brackets, if applicable 5 to your personal specifications with the highest standards of quality and craftsmanship. We have confidence that it will provide you with many years of beauty and easy maintenance. Enjoy! Marque la ubicación de los tornillos; centre los soportes adicionales, si es aplicable Follow the easy step-by-step instructions to install your shade. Should you need additional support, please feel free to call our Customer Service Center at 1-800-221-6352 or email us at windowfashions@springswindowfashions.com. We Marquer l’emplacement des vis; centrer les supports supplémentaires, le will be glad to help you. Again, we appreciate that you have chosen us to enhance the design and look of your home. cas échéant Inside/ceiling mount Outside mount Optional extension bracket Gracias por adquirir este fino tratamiento de ventana orgullosamente fabricado para usted. Su persiana ha sido hecha a la medida del cliente según sus especificaciones personales con los más altos estándares de calidad y trabajo Montaje de techo/interior Montaje exterior Soporte de extensión opcional artesanal. Nosotros tenemos la confianza que le proveerá muchos años de belleza y fácil mantenimiento. ¡Disfrútela! Pose intérieure/au plafond Pose extérieure Rallonge (en option) Siga las fáciles instrucciones “paso a paso"para instalar su persiana. Si necesita ayuda adicional, favor de proceder con 1/4" toda libertad llamando al Centro de Servicio al Cliente al teléfono 1-800-221-6352 o enviando un correo electrónico 6,4 mm a windowfashions@springswindowfashions.com. Estaremos muy dispuestos para ayudarle. Nuevamente, nosotros apreciamos que nos haya escogido para mejorar el diseño y la apariencia de su hogar. Merci d’avoir acheté ce superbe traitement de fenêtre que nous sommes fiers d’avoir exécuté pour vous. Votre store a été fait sur mesure selon votre propre cahier des charges dans un souci d’excellence et de la plus haute technicité. Nous ne doutons pas qu’il vous offrira des années de beauté et d’entretien facile Profitez-en bien ! Pour installer votre store, veuillez suivre les instructions détaillées. Si vous avez des questions n’hésitez pas à prendre contact avec notre Centre de service après-vente en téléphonant au 1-800-221-6352 ou par courrier 1/4" to front of bracket for électronique au windowfashions@springswindowfashions.com. Nous vous aiderons avec plaisir. Encore une fois, flush mount nous vous remercions de nous avoir choisi pour améliorer et embellir votre intérieur. 6,4 mm mOtORIzatIOn desde el frente del IllustRatIOns_Motorized shade install guide soporte para un montaje a ras HOW TO INSTALL 6,4 mm jusqu’à l’avant du support pour montage CÓMO INSTALAR encastré If using optional Battery Hanger, skip ahead to step 8 COMMENT INSTALLER If using optional Battery Hanger, skip ahead to step 8 If using optional Battery Hanger, skip ahead to step 8 Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. 6 If mounting the battery case, mark battery screw locations Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. If mounting the battery case, mark battery screw locations If mounting the battery case, mark battery screw locations outside 1 Everything needed to install your shade mount Inside/ceiling mount Outside mOtORIzatIOn mount IllustRatIOns_Motorized shade install guide Todo lo necesario para instalar su persiana. Montaje de techo/interior • Pose intérieure/au plafond Montaje exterior • Pose extérieure Tout le nécessaire pour installer votre store 1 Shade 2 Brackets/Screws 1 3 Optional Extension Brackets 4 Reloadable battery case (optional) 5 Battery hanger/Screws 6 Plug-in Transformer (optional) 7 8 AA Batteries (optional) Single cell Celda sencilla Cellulaire simple On right end of window, hold battery case 1" behind On right end of window, hold battery case 1/4" above and 1 Shade 4 and 2" to the left of the rear bracket screw location and to 2" the left of the left bracket screw location and mark. 2 Brackets/Screws mark. For a second reloadable battery case, mount the For a second battery case, position base 5" tot he left of 3 Optional Extension Brackets 5 outside second setinside 5" tomount the left of the first base and mark. the first base and mark screw locations. 4 Reloadable battery case (optional) mount 5 Battery hanger/Screws On right end of window, hold battery case 1” behind and On right end of window, hold battery case 1/4” above and 6 Plug-in Transformer (optional) 2” to the left of the rear bracket screw location and mark. to 2” the left of the left bracket screw location and mark. 7 8 AA Batteries (optional) Draft-Image Review Only For a second reloadable battery case, mount the 141209 (6-1814) For a second battery case, position base 5” tot he left of second set 5” to the left of the first base and mark. the first base and mark screw locations. 7 AA8 Double cell 1 Shade Celda doble On right end of window, hold battery case 1” behind and 2 Brackets/Screws On right end of window, hold battery case 1/4” above and AA AA 6 Cellulaire double 2” to the left of the rear bracket screw location and mark. AA AA to 2” the left of the left bracket screw location and mark. AA AA 3 Optional Extension Brackets AA AA For a second reloadable battery case, mount the For a second battery case, position base 5” tot he left of 4 Reloadable battery case (optional) second set 5” to the left of the first base and mark. 5 Battery hanger/Screws the first base and mark screw locations. 6 Plug-in Transformer (optional) 2 7 8 AA Batteries (optional) 7 Bracket chart (items 3, 4, 8 & 10) Tabla de soportes Drill holes, screw brackets into place, and battery case if applicable. Pleated Tableau des supports Plisada Drill holes, screw brackets into place, and battery case if applicable. Ordered width Bracket quantity Plissé Drill holes, screw brackets into place,inside andmount battery case if applicable. Ancho ordenado Cantidad de soportes Largeur commandée Quantité de boîtier 3 Inside/ceiling mount Outside mount Draft-Image Review Only Up to 42" • hasta 106,7 cm • jusqu’à 106,7 cm 2 Montaje de techo/interior • Pose intérieure/au plafond Montaje exterior • Pose extérieure 421⁄16" to 72" • 106,8 cm hasta 182,9 cm • 106,8 cm jusqu’à 182,9 cm 3 721⁄16" to 102" • 183 cm hasta 259,1 cm • 183 cm jusqu’à 259,1 cm 4 1021⁄16” to 132” • 259,2 cm hasta 335,3 cm • 259,2 cm jusqu’à 335,3 cm 5 1321⁄16” to 144” • 335,4 cm hasta 365,9 cm • 335,4 cm jusqu’à 365,9 cm 6 Shades over 3,600 in2 (4,200 Roman) will have 2 battery cases • Shades over 3,600 in2 (4,200 Looped Roman) will have 2 battery cases • Shades over 3,600 in2 (4,200 Roman) will have 2 battery Lazada cases En boucle Tools needed • Herramientas necesarias • Outillage nécessaire 1/16" drill bit Broca de 1,6 mm Mèche de 1,6 mm Optional extension bracket Soporte de extensión opcional • Rallonge (en option) 2 Determine inside/ceiling or outside mount Determine el montaje interior/de techo o exterior Choisir la pose intérieure/au plafond ou extérieure 3 Place shade in desired location, mark corners Coloque la persiana en la ubicación deseada, marque las esquinas Placer le store dans l’emplacement souhaité, marquer les coins Inside/ceiling mount Outside mount Optional extension bracket: assemble brackets Montaje de techo/interior • Pose intérieure/au plafond Montaje exterior • Pose extérieure Soporte de extensión opcional: ensamble los soportes • Support de projection en option : assembler les supports Attach headrail brackets to extension brackets using screws and nuts. Conecte los soportes del cabezal con los soportes de extensión utilizando tornillosy tuercas. Fixer les supports de boîtier aux rallonges à l’aide des vis et des écrous. 4 Measure in from both ends and mark Mida desde los dos extremos y marque Mesurer à partir de chacune des extrémités et marquer Inside/ceiling mount Outside mount Montaje de techo/interior • Pose intérieure/au plafond Montaje exterior • Pose extérieure 6" 6" 15,2 cm 15,2 cm Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com 79056-00 (07/14)

2 5 1 Shade 1 A A AA AA 7 T6optionalb 7 6 AA AA 2 T AA AA AA AA AA AA PPPPPPPPPPPPPPPPP 3 TT 7 4 AA AA AA AA 3 TT 4 AA AA AA AA 5 TTT6optionalb TTTTTTT B TTT6 AA8 TTTT TTTTTTTTT TT 7 T6optionalb 6 TTTT TT TTTTTTT TT 8 1 10 AA AA PPPPPP 7 Remove battery case lid, insert batteries into lid Mount shade, Battery Case and connect power cable. AA AA TT TT TT AA AA Remove battery case lid, insert batteries into lid Mount shade, Battery Case and connect power cable. AA AA TT 2 5 1 Shade Remove battery case lid, insert batteries into lid 1 2 T TT 4 Mount shade, Battery Case and connect power cable. 3 TT TTTTTTT 3 2 2 4 TT PPPPPPPP 5 PPPPPPPP PPPPPPPPPPPPPPPPP TT TT 4 TTT6optionalb PPPPPPPP 6 PPPPP TTT PPPPPPPPPPPPPPPPP AA8 Inside/ceiling mount Outside mount Optional extension bracket 2 Montaje de techo/interior Montaje exterior Soporte de extensión opcional 7 T6optionalb PPPPPPPPPPPPPPPPP 6 A B Pose intérieure/au plafond Pose extérieure Rallonge (en option) AA AA 7 A TT B AA AA TTTT AA AA A B TTTT TTTT AA AA - + TTTT AL BAKALI TT NE TTTT S ER IE AA TT NE ER AA BA ALI TTTT IES + ALK - TTTTTTT TT 2 PPPPPPPPPPPPPPPPP TT A TT B PPPPPPPPP TTTT PPPPPPPP TTTT PPPPPPPP 3 3 4 4 PPPPPPPP PPPPPPPP PPPPPPPP PPPPP B PPPPPPPP PPPPP 5 2 Reattach the Battery Case lid to the Battery Case base by aligning the PPPPPPPP PPPPPPPP 3 4 PPPPPPPPPPPPPPPPP SNAP slots slots PPPPPPPP PPPPP Connect battery Cable 8 pegs with the slots. slots Conecte los alambres de la batería • Connecter AA8les files de la pile A Reattach the Battery Case lid toBthe Battery Case base by aligning the pegs with the slots. TTTT AA 4 6 AA AA AA TTTT Reattach the Battery Case lid to the Battery CasePPPPPP base by aligning the2 AA 1 AA AA AA 3 pegs with the slots. PPPPPPPP PPPPPPPP 1 Sh 3 PPPPPPPP slots ade 1 4 PPPPP Operating your shade, Vitrual Cord™ 2 T nalb Operando su persiana, Vitrual Cord™ 3 TT 6optio 4 TT Fonctionnement du store, Vitrual Cord™ PPPPPPPP 5 TTT PPPPPPPP 3 5 5 4 PPPPPPPPP nalb 7 PPPPPPPPP PPPPPPPP PPPPP6 TTT6optio TT 5 7 T slots PPPPPPPPP Up A A B B Up A B TTTTTTT SNAP SNAP Up Light Indicator SNAP Light Indicator Light Indicator TT Down Program Button Down Program Button 5 PPPPPPPPP TT Down Program Button 95 Optional Battery Hanger TTTT Optional Battery A Hanger TTTT B NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. Optional Battery Hanger PPPPPPPPP SNAP B NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. PPPPPPPPPPPPPPPPP A B 2 SNAP NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. A 1. Adding 1. Adding Adjusting the upper or lower limits of your shade, Vitrual Cord™ 1. Adding Adjusting the upper or lower limits of your shade, Vitrual Cord™ Adjusting the upper or lower limits of your shade, Vitrual Cord™ PPPPPPPP 4 PPPPP Attach the battery pack hanger to the assembled battery case. Shade Endcap/ Push Button Control Attach the battery pack hanger to the assembled battery case. Shade Endcap/ Push Button Control PPPPPPPP Shade Endcap/ 6 38 Attach the battery packCCCCCCCCC hanger to the assembled battery case. CCCCCC PPPPPPPP Push Button Control CCCCC slots CCCCCC 6 8 CCCCCCCCC CCCCCC If adjusting the upper or lower shade limits, follow these steps: A CCCCC B CCCCCC Bring the shade to the upper or lower limit by pressing Up or Down button. A B Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. SNAP Press and release the shade endcap, the shade will jog. B Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. The new limit is saved to the shade and programming is complete. The shade endcap light no longer PPPPPPPPP Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. 5 flashes. 7 CCCCCCCCCCC Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. shade 7A CCCCCCCCCCC A shade If adjusting the upper or lower shade limits, follow these steps: B Bring the shade to the upper or lower limit by pressing Up or Down button. A B Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and SNAP SNAP down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and release the shade endcap, the shade will jog. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flashes. Attach bracket with Battery Case to shade. If adjusting the upper or lower shade limits, follow these steps: Attach bracket with Battery Case to shade. Bring the shade to the upper or lower limit by pressing Up or Down button. Attach bracket with Battery Case to shade. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and release the shade endcap, the shade will jog. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flashes. Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com 79056-00 (07/14)

1. Adding 1. Adding 1. Adding Adding a control, Virtual Cord™ 1. Adding Setting an Intermediate (Home) Position, Single Channel Remote 1. Adding Adding a control, Virtual Cord™ 1. Adding Setting an Intermediate (Home) Position, Single Channel Remote Adding a control, Virtual Cord™ Setting an Intermediate (Home) Position, Single Channel Remote If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control. Setting - Press and hold the shade end cap until the shade jogs (a brief up and down movement). Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press The control and shade endcap will flash green with solid red, confirming that you are ready to pair the Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, control. the shade will jog. The position is saved to the shade, repeat to set a new home position. On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing Using - button. The shade will jog. Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade Control is now saved to the shade. position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is actively moving, the Stop/Intermediate button would need to be pressed twice. If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control. Setting - Press and hold the shade end cap until the shade jogs (a brief up and down movement). Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press The control and shade endcap will flash green with solid red, confirming that you are ready to pair the Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, control. the shade will jog. The position is saved to the shade, repeat to set a new home position. On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing Using - button. The shade will jog. Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade Control is now saved to the shade. position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is actively moving, the Stop/Intermediate button would need to be pressed twice. If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control. Press and hold the shade end cap until the shade jogs (a brief up and down movement). Setting - The control and shade endcap will flash green with solid red, confirming that you are ready to pair the Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press control. Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing the shade will jog. The position is saved to the shade, repeat to set a new home position. button. The shade will jog. Using - Control is now saved to the shade. Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is For Optional Single Channel Remote For Optional Single Channel Remote • For Optional Single Channel Remote actively moving, the Stop/Intermediate button would need to be pressed twice. Operating your shade, Single Channel Remote Operando su persiana, Single Channel Remote Fonctionnement du store, Single Channel Remote 1. Adding 1. Adding Adding a Control, Single Control Remote Up 1. Adding Adding a Control, Single Control Remote Up Light Indicator Adding a Control, Single Control Remote Up Light Indicator Light Indicator If adding a new remote, follow these steps: Down Down A. When the Virtual Cord™ is not present Down Stop/Intermediate/Home Position Stop/Intermediate/Home Position Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. Stop/Intermediate/Home Position Program Button Confirming that you are ready to pair the control. Program Button Program Buton On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. B. Using the Virtual Cord™ Control, Copy and Paste NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. button until the shade jogs. The shade endcap will flash green, with solid red. On the back of the Single Channel remote, use a paperclip or similar item, press and release the 1. Adding programming button. The shade will jog. 1. Adding Adjusting the Upper or Lower Limit of your shade, Single Channel Remote 1. Adding Adjusting the Upper or Lower Limit of your shade, Single Channel Remote The control is now saved to the shade. Adjusting the Upper or Lower Limit of your shade, Single Channel Remote If adjusting the upper or lower shade limits, follow these steps: If adding a new remote, follow these steps: Bring the shade to the upper or lower limit by pressing Up or Down button. A. When the Virtual Cord™ is not present Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. down movement.) Confirming that you are ready to pair the control. The control and shade endcap will flash orange and green, confirming that you are in programming mode. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. Adjust the shade using the Up or Down button to your desired new limit. The control is now saved to the shade. Press and hold the Stop/Intermediate button on the control, until the shade jogs. B. Using the Virtual Cord™ Control, Copy and Paste The new limit is saved to the shade and programming is complete. The shade endcap light no longer flahses. On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming button until the shade jogs. The shade endcap will flash green, with solid red. On the back of the Single Channel remote, use a paperclip or similar item, press and release the If adjusting the upper or lower shade limits, follow these steps: programming button. The shade will jog. Bring the shade to the upper or lower limit by pressing Up or Down button. The control is now saved to the shade. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and down movement.) If adding a new remote, follow these steps: The control and shade endcap will flash orange and green, confirming that you are in programming mode. A. When the Virtual Cord™ is not present Adjust the shade using the Up or Down button to your desired new limit. Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. Press and hold the Stop/Intermediate button on the control, until the shade jogs. Confirming that you are ready to pair the control. The new limit is saved to the shade and programming is complete. The shade endcap light no longer On the back of the Single Channel remote, use a paperclip or similar item, press and release the flahses. programming button. The shade will jog. The control is now saved to the shade. If adjusting the upper or lower shade limits, follow these steps: B. Using the Virtual Cord™ Control, Copy and Paste Bring the shade to the upper or lower limit by pressing Up or Down button. On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and button until the shade jogs. The shade endcap will flash green, with solid red. down movement.) On the back of the Single Channel remote, use a paperclip or similar item, press and release the The control and shade endcap will flash orange and green, confirming that you are in programming mode. programming button. The shade will jog. Adjust the shade using the Up or Down button to your desired new limit. The control is now saved to the shade. Press and hold the Stop/Intermediate button on the control, until the shade jogs. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flahses. Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com 79056-00 (07/14)

FCC Interference Statement (Part 15.105 (b) 1. Adding This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 1. Adding Deleting a Control, Single Channel Remote 1. Adding Deleting a Control, Single Channel Remote to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Deleting a Control, Single Channel Remote interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference If you need to remove a control from a shade, follow these steps: to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap determined by turning the equipment off and on, the user is encouraged to try to correct the interference by will flash green and solid red, confirming that you are ready to unpair the control. one of the following measures: On the back of the Single Channel remote, use the paperclip or similar item, press and release the - Reorient or relocate the receiving antenna. programming button. The shade will jog. - Increase the separation between the equipment and receiver. The single channel remote is deleted, and will not operate the shade. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. If you need to remove a control from a shade, follow these steps: - Consult the dealer or an experienced radio/TV technician for help. Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap will flash green and solid red, confirming that you are ready to unpair the control. On the back of the Single Channel remote, use the paperclip or similar item, press and release the FCC STATEMENTS programming button. The shade will jog. The single channel remote is deleted, and will not operate the shade. This portable transmitter with its antenna complies with FCC/IC RF exposure limits for general population / uncontrolled exposure. If you need to remove a control from a shade, follow these steps: Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap Compliance Statement (Part 15.19) will flash green and solid red, confirming that you are ready to unpair the control. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: On the back of the Single Channel remote, use the paperclip or similar item, press and release the 1. This device may not cause harmful interference, and programming button. The shade will jog. 2. This device must accept any interference received, including interference that may cause The single channel remote is deleted, and will not operate the shade. undesired operation. Warning (Part 15.21) 1. Adding Changes or modifications not expressly approved by the party responsible for compliance could void the 1. Adding Changing Motor Direction 1. Adding Changing Motor Direction user’s authority to operate the equipment. Changing Motor Direction If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the motor direction needs to be modified. Follow these steps to reverse direction: FCC Interference Statement (Part 15.105 (b) Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. interference in a residential installation. This equipment generates uses and can radiate radio frequency If using the Virtual Cord™, press and release the shade end cap. The shade will jog. energy and, if not installed and used in accordance with the instructions, may cause harmful interference If using the Single Channel Remote, press and hold the button until the shade jogs. to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be Motor direction is reversed, Press Up or Down button to confirm correct direction. determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the - Reorient or relocate the receiving antenna. motor direction needs to be modified. Follow these steps to reverse direction: - Increase the separation between the equipment and receiver. Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). - Connect the equipment into an outlet on a circuit different from that Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. to which the receiver is connected. If using the Virtual Cord™, press and release the shade end cap. The shade will jog. - Consult the dealer or an experienced radio/TV technician for help. If using the Single Channel Remote, press and hold the button until the shade jogs. Motor direction is reversed, Press Up or Down button to confirm correct direction. INDUSTRY CANADA STATEMENTS If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the motor direction needs to be modified. Follow these steps to reverse direction: Section 7.1.3 of RSS-GEN Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. If using the Virtual Cord™, press and release the shade end cap. The shade will jog. If using the Single Channel Remote, press and hold the button until the shade jogs. Section 7.1.2 of RSS-GEN Motor direction is reversed, Press Up or Down button to confirm correct direction. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. FCC STATEMENTS DÉCLARATIONS D’INDUSTRIE CANADA This portable transmitter with its antenna complies with FCC/IC RF exposure limits for general population / uncontrolled exposure. Section 7.1.3 DE RSS-GEN Compliance Statement (Part 15.19) Cet appareil se conforme à la (aux) norme(s) RSS exempte(s) de licence d’Industrie Canada. Son This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: fonctionnement est soumis aux deux conditions suivantes : 1) cet appareil ne doit pas causer de 1. This device may not cause harmful interference, and l’interférence, et 2) cet appareil doit accepter toute interférence, y compris l’interférence qui peut causer un fonctionnement indésirable de l’appareil. 2. This device must accept any interference received, including interference that may cause undesired operation. Section 7.1.2 DE RSS-GEN En vertu des règlements d’Industrie Canada, cet émetteur radio ne peut fonctionner qu’en utilisant une antenne d’un type et d’une amplification maximale (ou inférieure) approuvés pour l’émetteur par Industrie Warning (Part 15.21) Canada. Pour réduire l’interférence radio potentielle aux autres utilisateurs, le type d’antenne et son Changes or modifications not expressly approved by the party responsible for compliance could void the amplification doivent être choisis de manière à ce que la puissance isotrope rayonnée équivalente (pire) ne user’s authority to operate the equipment. soit pas supérieure à ce qui est nécessaire pour une communication réussie. Customers located in the USA and Canada Importador en México: contact our Customer Service Center at Springs Window Fashions Sales Company de 1-800-221-6352 México, S. de R.L. de C.V. Springs Window Fashions LLC Carretera Federal Reynosa a Matamoros Sin P.O. Box 500, 8467 Route 405 South Número Edif 10A Montgomery, PA 177521 Prologis Park, Ciudad Reynosa, Tamaulipas CP 88780 Clientes de México: llamar al 01-800-909-0793 TEL. (899) 954-0361 para obtener instrucciones sobre el lugar al que Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com deben enviar el producto para su reparación. 79056-00 (07/14)


Document Created: 2014-07-07 12:50:16
Document Modified: 2014-07-07 12:50:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC