Exhibit E Test Measurement Report per 2 1033 b6

FCC ID: DD4P10TD

Test Report

Download: PDF
FCCID_4077559

Engineering Test Report No. SEL-030/P10T L8A FCC15C SHURE ELECTROMAGNETIC COMPATIBILITY LABORATORY TEST REPORT TEST REPORT TITLE: Electromagnetic Compatibility Tests of the Shure P10T L8A Digital Wireless Transmitter in the 657MHz to 663MHz Band TEST ITEM DESCRIPTION: The Shure P10T is an analogue wireless microphone transmitter, microprocessor controlled transmitter. For: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714 Project ID Number: SEL-030/P10T L8A Date Tested: January 11, 2018, February 22, 26, 27, 2018, March 13, 28, 2018 Test Personnel: Juan Castrejon, Alex Mishinger, Jamal Qureshi, and Craig Kozokar Test Specification: FCC Part 15C, Section 15.236g TEST REPORT BY: ___________________ Global Compliance Engineer ____________ 5/1/2018 APPROVED BY: _____________________ _______________________ GC Project Engineer ____________ 5/1/2018 Signature Position Date Page 1 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C TABLE OF CONTENTS PARAGRAPH DESCRIPTION OF CONTENTS PAGE NO. 0. Report Revision History ................................................................................................................... 4 1. Introduction ..................................................................................................................................... 5 1.1. Scope of Tests .............................................................................................................. 5 1.2. Purpose ........................................................................................................................ 5 1.3. Deviation, Additions and Exclusions ............................................................................ 5 1.4. EMC Laboratory Identification ..................................................................................... 5 1.5. Summary of Tests Performed ...................................................................................... 5 2. Applicable Documents...................................................................................................................... 6 3. EUT Setup and Operation ................................................................................................................ 6 3.1 General Description ..................................................................................................... 6 3.2 Test Samples ................................................................................................................. 6 3.3 Operational Mode ......................................................................................................... 6 4 Test Instrumentation ........................................................................................................................ 6 5 Procedure………………………………………………………………………………………………………………………………….. 7 6 Other Test Conditions ..................................................................................................................... 7 6.1 Test Personnel.............................................................................................................. 7 6.2 Disposition of the EUT .................................................................................................. 7 7 Results of Tests ................................................................................................................................ 7 8 Conclusions ...................................................................................................................................... 7 9 Certification ..................................................................................................................................... 7 10 Equipment List ................................................................................................................................. 8 11 Appendix A ...................................................................................................................................... 9 12 Appendix B ………………………………………………………………………………………………………………………………. 26 13 Appendix C ………………………………………………………………………………………………………………………………. 29 Note: This report shall not be reproduced, except in full, without the written approval of the Shure Incorporated Electromagnetic Laboratory (SEL). Total Page Count is 31. Page 2 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C LIST OF APPENDICIES APPENDIX TEST DESCRIPTION A Radiated RF Spurious Emissions Measurement, 30 MHz to 10 GHz B Maximum Radiated Power C Necessary Bandwidth Page 3 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C REPORT REVISION HISTORY Revision Date Description 0 March 30, 2018 Initial release Page 4 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C 1. INTRODUCTION 1.1. Scope of Tests This report presents the results of testing per FCC Part 15C, Section 236g, Radiated RF Spurious Emissions, Necessary Bandwidth, and Maximum Radiated Power. The following data was taken following the measurement method as described in the document section(s) listed on page 1 of this document. Provided is the data for the test sample. Also included is a summary of the measurements made and a description of the measurement setup. The test sample meet the requirements of the above standards. The equipment under test (EUT) contained a transmitter that was designed to transmit in the UHF TV frequency bands shown in Table 1. Model Band Frequency (MHz) Output Power (mW) P10T L8A 657 to 663 10 Table 1. EUT Frequencies and Power Levels 1.2. Purpose This series of testing was performed to determine if the test item would meet the requirements of FCC Part 15C, Section 236g. 1.3. Deviations, Additions and Exclusions None 1.4. EMC Laboratory Identification The electromagnetic compatibility tests were performed at the Shure Electromagnetic Laboratory, Shure Incorporated, 5800 West Touhy Ave, Niles, Illinois 60714-4608. This laboratory is registered with Industry Canada as Site # 616A-1. The Shure Electromagnetic Laboratory is accredited by the National Institute of Standards and Technology (NIST) under the National Voluntary Laboratory Accreditation Program (NVLAP). The NVLAP Lab Code is: 200946-0. 1.5. Summary of Tests Performed The following electromagnetic compatibility tests (Table 2) were performed on the test item in accordance with ETSI specifications. Table 2. Summary of tests performed Test Spec Description Tested Frequency Appendix Test Results Radiated Spurious FCC Part 15C 30 MHz to 10 GHz A Pass Emissions Maximum Radiated 657.125MHz, FCC Part 15C B Pass Power 662.875MHz Necessary FCC Part 15C Bandwidth 660.000MHz C Pass Measurements Page 5 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C 2. APPLICABLE DOCUMENTS The following documents of the exact issue designated form part of this document to the extent specified herein: FCC Part 15C, Section 236g EN 300 422-1 v1.4.2 (2011-08), “Wireless Microphone “Electromagnetic Compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25MHz to 3GHz frequency range; Part 1; Technical characteristics and methods of measurements” ANSI C63.4 (2014), "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz" 3. EUT SET-UP AND OPERATION 3.1. General Description The test sample used was Shure P10T wireless microphone transmitter. The EUT was arranged and tested per individual Appendices. 3.2 Test Sample The following product sample was tested: Table 3: Shure P10T L8A Wireless Transmitter Sample P10T L8A Serial Numbers #1 3.3 Operational Mode All necessary bandwidth tests were performed at the below transmit frequency and output power modes shown in Table 4. Band Frequency in MHz L/M/H Power Level in mW L8A 660.000 Middle 10 Table 4. EUT Frequencies and Power Levels All radiated spurious emissions and maximum radiated power tests were performed at the below transmit frequency and output power modes shown in Table 5. Band Frequency in MHz L/M/H Power Level in mW L8A 657.125 Low 10 L8A 662.875 High 10 Table 5. EUT Frequencies and Power Levels 4. Test Instrumentation A list of the test equipment used can be found in Table 10-1. All equipment used was within calibration during and throughout the duration of the tests. All calibrations are traceable to the National Institute of Standards and Technology (NIST). Page 6 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C 5. Procedure The specific test procedures are presented in the individual appendices. 6. Other Test Conditions: 6.1. Test Personnel All EMC tests were performed by qualified personnel from the Shure EMC Laboratory. 6.2. Disposition of the EUT The EUTs and all associated equipment were returned to Shure Incorporated upon completion of the tests. 7. Results of Tests: The results are presented in Appendices. It was found that the EUT meet the requirements of FCC Part 15C, Section 236g for Radiated RF Spurious Emissions, Maximum Radiated Power, and Necessary Bandwidth. 8. Conclusions: It was determined that the Shure P10T L8A Wireless Microphone Transmitter did fully comply with the requirements of FCC Part 15C, Section 236g, Radiated RF Spurious Emissions, Maximum Radiated Power, and Necessary Bandwidth. 9. Certification: Shure EMC Laboratory certifies that the information contained in this report was obtained under conditions which meet or exceed those specified in the test specifications. The data presented in this test report pertains to the EUTs at the test date. Any electrical or mechanical modification made to the EUTs subsequent to the specified test date will serve to invalidate the data and void this certification. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Page 7 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C 10. Equipment List Table 10-1 Test Equipment Frequency L# or ID Description Manufacturer Model # Serial # Cal Date Due Date Range 3 meter RF L23-011-01 ETS Lindgren FACT-3 AJ640 25MHz - 18GHz 8/8/2017 8/8/2018 Chamber Electric L23-011-02 Powered ETS Lindgren 2088 N/A N/A N/A N/A Turntable L23-011-08 Controller EMCO 2090 29799 N/A N/A N/A Antenna L23-011-09 ETS Lindgren 2071-2 35500 N/A N/A N/A Positioner BiConiLog L23-011-15 ETS Lindgren 3142C 34790 25MHz-1GHz 6/22/2017 6/22/2018 Antenna BiConiLog L23-011-44 ETS Lindgren 3142C 79899 25MHz-1GHz 2/27/2017 2/27/2018 Antenna EMI Test Rohde & L23-011-54 ESR26 100220 9kHz-26GHz 3/30/2017 3/30/2018 Receiver Schwarz EMI/EMS Rohde & L23-011-31 Test EMC32 V 9.21.00 N/A N/A N/A Schwarz Software Horn antenna L23-011-55 ETS Lindgren 3117-PA 206583 1GHz to 18 GHz 4/27/2017 4/27/2018 with pre- amplifier Horn L23-011-41 ETS Lindgren 3117 123511 1GHz to 18 GHz 5/7/2017 5/7/2018 Antenna 11SH10- High Pass L23-011-57 K&L 940/X10000- 3 940MHz – 10GHz 3/31/2017 3/31/2018 Filter 0/0 Spectrum Rohde & L23-022-02 FSW26 103788 9kHz-26GHz 3/28/2017 3/28/2018 Analyzer Schwarz Spectrum Rohde & L23-022-01 FSU26 201043 9kHz-26GHz 8/23/2017 8/23/2018 Analyzer Schwarz 20dB L23-040-09 Mini-Circuits BW-S20W2 N/A 20MHz to 18GHz 2/21/2017 2/21/2018 attenuator 20dB L23-040-04 Mini-Circuits BW-S20W5 1133 20MHz to 18GHz 7/18/2017 7/18/2018 attenuator Temperature L23-034-05 Extech 445703 48254-66 N/A 9/15/2016 9/15/2018 Hygrometer Temperature L23-034-04 Extech 445703 48254-13 N/A 9/15/2016 9/15/2018 Hygrometer RF Signal Rohde & L23-023-01 SMF100A 101553 20Hz to 26.5GHz 8/23/2017 8/23/2018 Generator Schwarz Page 8 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A A. RADIATED RF SPURIOUS EMISSIONS – 30 MHz TO 10 GHz Purpose: This test performed to determine if the EUT meets the radiated RF emission requirements of the FCC Part 15C section 236g over the frequency range from 30MHz to 10GHz. A Quasi-Peak and Average detectors were used for the measurements. Requirements: As stated in FCC 15C section 236g, spurious emissions must meet the limits specified in section 8.4 of ETSI EN 300 422-1 V1.4.2 (2011-08) Measurement Uncertainty: All measurements are an estimate of their true value. The measurement uncertainty characterizes, with a specified confidence level, the spread of values which may be possible for a given measurement system. Values of Expanded Measurement Uncertainty (95% Confidence) Measurement Type Ulab UETSI Radiated disturbance (electric field strength on an open area test 4.12 dB 6.00 dB site or alternative test site) (30 MHz – 1000 MHz) Radiated disturbance (electric field strength on an open area test 4.56 dB 6.00 dB site or alternative test site) (1 GHz – 13 GHz) Ulab = Determined for Shure EMC Laboratory UETSI = From ETSI EN 300 422-1 Table 6 Since Ulab is less than or equal to UETSI: - Compliance is deemed to occur if no measured disturbance exceeds the disturbance limit; Non-compliance is deemed to occur if any measured disturbance exceeds the disturbance limit. Test Setup and Instrumentation: Photographs of the test setup are shown in Figure 1 and Figure 2. The test instrumentation can be determined from Table 10-1. EUT Operation: The EUT was powered up and the frequency of the transmitter was selected using the front panel controls. The EUT was checked for proper operation after it was setup on the table. For radiated spurious emissions the testing was conducted with the EUT set to low and high frequencies, at 10mW RF output. All of the audio ports were connected to a shielded audio cable that was terminated into a match load resistor. The two Ethernet ports were connected to two routers, thru shielded Cat5e Ethernet cables. Page 9 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Specific Test Procedures: All tests were performed in a 28ft. x 20ft. x 18.5ft. 3m semi-anechoic test chamber. The walls and ceiling of the shielded chamber are lined with ferrite tiles. Anechoic absorber material is installed over the ferrite tile. The floor of the chamber is used as the ground plane. The chamber complies with ANSI C63.4-2003 for site attenuation. The shielded enclosure prevents emissions from other sources, such as radio and TV stations from interfering with the measurements. All power lines and signal lines entering the enclosure pass through filters on the enclosure wall. The power line filters prevent extraneous signals from entering the enclosure on these leads. BLOCK DIAGRAM OF SHIELDED ENCLOSURE Preliminary radiated measurements were performed to determine the frequencies where the significant emissions might be found. With the EUT at one set position and the measurement antenna at a set height (i.e. without maximizing), the radiated emissions were measured using a peak detector and automatically plotted. The BiConiLog measuring antenna was positioned at a 3 meter distance from the EUT. Page 10 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A All significant broadband and narrowband signals found in the preliminary sweeps were then measured using a peak detector at a test distance of 3 meters. The measurements were made with a BiConiLog antenna over the frequency range of 30 MHz to 1 GHz, and a double ridged waveguide antenna over the frequency range of 1 GHz to 10 GHz. To ensure that maximum emission levels were measured, the following steps were taken: i. The EUT was rotated so that all of its sides were exposed to the receiving antenna. ii. Since the measuring antennas are linearly polarized, both horizontal and vertical field components were measured. iii. The measuring antenna was raised and lowered from 1 to 4 meters for each antenna polarization to maximize the readings. The equivalent power was determined from the field intensity levels measured at 3 meters using the substitution method. To determine the emission power, another antenna was set in place of the EUT and connected to a calibrated signal generator. (A tuned dipole was used for all measurements below 1GHz and a double ridged waveguide antenna was used for all measurements above 1GHz.) The output of the signal generator was adjusted to match the received level at the EMI receiver. The signal level was recorded. The reading was corrected to compensate for cable loss and antenna gain. Results: The plots of the peak preliminary radiated voltage levels and maximized quasi-peak radiated voltage levels results are presented on page 12 thru page 23. The ERP measurements are shown on pages 24 thru page 25. All emissions measured from the EUT were within the ETSI EN 300 422-1 specification limits. Figure 1: P10T Transmitter Test Setup Figure 2: P10T Transmitter Test Setup Page 11 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A SHURE Radiated RF Emissions Test Report Common Information Test Description: FCC 15C Radiated Emissions 30MHz - 1GHz EUT P10T L8A Serial Number #1 Operating Conditions: 657.125MHz, 10mW, powered by 120VAC 60Hz Tested on March 28, 2018 Operator Name: Jamal Qureshi EMI Auto Test Template: Bandsaw COMPLIANCE TEST FCC 15C 30MHz to 1GHz 34790 FCC Hardware Setup: Electric Field Strength 34790 Measurement Type: Open-Area-Test-Site Frequency Range: 30 MHz - 1 GHz Graphics Level Range: 0 dBµV/m - 125 dBµV/m Preview Measurements: Graphics Display: Show separate traces for horizontal and vertical polarization Sweep Test Template: Compliance Test FCC 30MHz 1GHz 34790 PREVIEW Adjustment: Template for Single Meas.: COMPLIANCE TEST FCC 15B 30 to 1000 MHz 34790 MAX Final Measurements: Template for Single Meas.: COMPLIANCE TEST FCC 15B 30 to 1000 MHz 34790 FINAL Subrange Step Size Detectors IF BW Meas. Time Preamp Receiver: [ESR 26] 25 MHz - 30 MHz 2.25 kHz PK+ ; QPK 9 kHz 1s 0 dB 30 MHz - 1 GHz 30 kHz PK+ ; QPK 120 kHz 2s 0 dB Page 12 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Hardware Setup: EMI radiated\Electric Field Strength 34790 - [EMI radiated] Subrange 1 Frequency Range: 25 MHz - 1 GHz Receiver: ESR 26 [ESR 26] @ GPIB0 (ADR 20), SN 1316.3003K26/101347, FW 2.26, CAL 5/28/2016 Signal Path: Receiver-EMI to 1 GHz FW 1.0 Correction Table: Receiver-EMI Antenna 18GHz L23_041_38 8m Antenna: ETS 3142C 34790 SN 34790, CAL 6/3/2017 Correction Table (vertical): BiconiLog 3142C Hor-34790 2017 06 17 Correction Table (horizontal): BiconiLog 3142C Hor-34790 2017 06 17 Antenna Tower: Tower [EMCO 2090 Antenna Tower] @ GPIB0 (ADR 8), FW REV 3.21 Turntable: Turntable [EMCO Turntable] @ GPIB0 (ADR 9), SN 29799, FW REV 3.21 Page 13 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Full Spectrum 120 110 100 90 80 EN 300 422 TRANSMITTER Level in dBµV/m 70 60 50 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Critical Results Frequency MaxPeak DET 2 Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. Comment (MHz) (dBµV/m) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB/ (ms) m) 657.137333 109.47 --- 53.00 -56.47 --- --- 178.0 V 147.0 22.0 3:57:09 PM - 3/28/2018 Final Results Frequency QuasiPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. Comment (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB/m) (ms) 657.137333 108.42 53.00 -55.42 1000.0 120.000 178.0 V 147.0 22.0 3:57:19 PM - 3/28/2018 Page 14 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A SHURE Radiated RF Emissions Test Report Common Information Test Description: FCC15C Radiated Emissions 1GHz - 10GHz EUT: P10T L8A Serial Number: #1 Operating Frequency: 657.125MHz Power Level / Mod Mode: 10mW Name: Alex Mishinger Comments: Tested on February 22, 2018 EMI Auto Test Template: COMPLIANCE TEST FCC 15C 1GHz to 10GHz 3117-PA 200363 FCC Hardware Setup: Electric Field Strength 3117-PA 200363 2017 10 17 Measurement Type: Open-Area-Test-Site Frequency Range: 1 GHz - 10 GHz Graphics Level Range: 0 dBµV/m - 120 dBµV/m Preview Measurements: Antenna height: 100 - 400 cm , Step Size = 50 cm , Positioning Speed = 6 Polarization: H+V Turntable position: 0 - 360 deg , Continuously , Measuring Speed = 5 Graphics Display: Show separate traces for horizontal and vertical polarization Sweep Test Template: COMPLIANCE TEST EN300422 Transmitter 1-18 GHz 3117-PA 200363 PREVIEW Adjustment: Antenna height: Range = 50 cm , Measuring Speed = 1 Turntable position: Range = 90 deg , Measuring Speed = 5 Template for Single Meas.: COMPLIANCE TEST EN300422 Transmitter 1 to 18 GHz 3117- PA 200363 MAX Final Measurements: Template for Single Meas.: COMPLIANCE TEST EN300422 Transmitter 1 to 18 GHz 3117- PA 200363 FINAL Subrange Step Size Detectors IF BW Meas. Time Preamp Receiver: [ESR 26] 1 GHz - 18 GHz 250 kHz AVG 1 MHz 1s 0 dB Page 15 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Hardware Setup: EMI radiated\Electric Field Strength 3117-PA 200363 - [EMI radiated] Subrange 1 Frequency Range: 1 GHz - 18 GHz Receiver: ESR 26 [ESR 26] @ GPIB0 (ADR 20), SN 1316.3003K26/101347, FW 2.26, CAL 5/28/2016 Signal Path: Receiver-EMI to 18 GHz FW 1.0 Correction Table: Receiver-EMI Antenna TEMP 2016 11 23 Antenna: EMI3117-PA 200385 SN 200385, CAL 10/16/2018 Correction Table (vertical): Horn ETS 3117-PA 200363 2017 10 16 Correction Table (horizontal): Horn ETS 3117-PA 200363 2017 10 16 Correction Table (vertical): L23_041_47 Cable Correction Table (horizontal): L23_041_47 Cable Antenna Tower: Tower [EMCO 2090 Antenna Tower] @ GPIB0 (ADR 8), FW REV 3.21 Turntable: Turntable [EMCO Turntable] @ GPIB0 (ADR 9), SN 29799, FW REV 3.21 Page 16 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Full Spectrum 120 110 100 2.628400000 GHz 3.942700000 GHz 1.314100000 GHz 34.992 dBµV/m 36.735 dBµV/m 90 29.960 dBµV/m 80 EN 300 422 TRANSMITTER Level in dBµV/m 70 60 50 40 30 20 1.971400000 GHz 3.285700000 GHz 4.599700000 GHz 10 36.076 dBµV/m 27.871 dBµV/m 37.662 dBµV/m 0 1G 2G 3G 4G 5G 6 7 8 9 10G Frequency in Hz Critical Frequencies Frequency MaxPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. Comment Corr. (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB/ (dB) (ms) m) 1314.100000 29.96 77.00 47.04 --- --- 346.0 V 9.0 --- 1:15:11 PM - 2/22/2018 --- 1971.400000 27.87 77.00 49.13 --- --- 364.0 V 29.0 --- 1:16:21 PM - 2/22/2018 --- 2628.400000 34.99 77.00 42.01 --- --- 239.0 V 4.0 --- 1:14:06 PM - 2/22/2018 --- 3285.700000 36.08 77.00 40.92 --- --- 208.0 V 258.0 --- 1:12:26 PM - 2/22/2018 --- 3942.700000 36.74 77.00 40.26 --- --- 349.0 H 118.0 --- 1:11:00 PM - 2/22/2018 --- 4599.700000 37.66 77.00 39.34 --- --- 296.0 H 44.0 --- 1:09:54 PM - 2/22/2018 --- Final Result Frequency Average Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. Comment Corr. (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB/m) (dB) (ms) 1314.100000 20.81 77.00 56.19 1000.0 1000.000 346.0 V 9.0 -16.1 1:15:20 PM - 2/22/2018 --- 1971.400000 16.84 77.00 60.16 1000.0 1000.000 364.0 V 29.0 -13.3 1:16:28 PM - 2/22/2018 --- 2628.400000 24.95 77.00 52.05 1000.0 1000.000 239.0 V 4.0 -12.1 1:14:15 PM - 2/22/2018 --- 3285.700000 25.48 77.00 51.52 1000.0 1000.000 208.0 V 258.0 -11.0 1:12:35 PM - 2/22/2018 --- 3942.700000 26.48 77.00 50.52 1000.0 1000.000 349.0 H 118.0 -9.0 1:11:08 PM - 2/22/2018 --- 4599.700000 26.93 77.00 50.07 1000.0 1000.000 296.0 H 45.0 -7.2 1:10:03 PM - 2/22/2018 --- Page 17 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A SHURE Radiated RF Emissions Test Report Common Information Test Description: FCC 15C Radiated Emissions 30MHz - 1GHz EUT: P10T L8A Serial Number: #1 Operating Frequency: 662.875MHz Power Level / Mod Mode: 10mW Name: Jamal Qureshi Comments: Tested on March 28, 2018 EMI Auto Test Template: COMPLIANCE TEST FCC15C-EN300422 Transmitter 30MHz to 1GHz 34790 EU Hardware Setup: Electric Field Strength 34790 Measurement Type: Open-Area-Test-Site Frequency Range: 30 MHz - 1 GHz Graphics Level Range: 0 dBµV/m - 120 dBµV/m Preview Measurements: Antenna height: 100 - 400 cm , Step Size = 50 cm , Positioning Speed = 6 Polarization: H+V Turntable position: 0 - 360 deg , Continuously , Measuring Speed = 5 Graphics Display: Show separate traces for horizontal and vertical polarization Sweep Test Template: Compliance Test EN300422 Transmitter 25MHz 1GHz 34790 PREVIEW Adjustment: Antenna height: Range = 50 cm , Measuring Speed = 1 Turntable position: Range = 90 deg , Measuring Speed = 5 Template for Single Meas.: COMPLIANCE TEST EN300422 Transmitter 25 to 1000 MHz 34790 FINAL Final Measurements: Template for Single Meas.: COMPLIANCE TEST EN300422 Transmitter 25 to 1000 MHz 34790 FINAL Subrange Step Size Detectors IF BW Meas. Time Preamp 25 MHz - 30 MHz 2.25 kHz PK+ 9 kHz 1s 0 dB 30 MHz - 1 GHz 30 kHz PK+ 120 kHz 1s 0 dB Receiver: [ESR 26] Page 18 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Hardware Setup: EMI radiated\Electric Field Strength 34790 - [EMI radiated] Subrange 1 Frequency Range: 25 MHz - 1 GHz Receiver: ESR 26 [ESR 26] @ GPIB0 (ADR 20), SN 1316.3003K26/101347, FW 2.26, CAL 5/28/2016 Signal Path: Receiver-EMI to 1 GHz FW 1.0 Correction Table: Receiver-EMI Antenna 18GHz L23_041_38 8m Antenna: ETS 3142C 34790 SN 34790, CAL 6/3/2017 Correction Table (vertical): BiconiLog 3142C Hor-34790 2017 06 17 Correction Table (horizontal): BiconiLog 3142C Hor-34790 2017 06 17 Antenna Tower: Tower [EMCO 2090 Antenna Tower] @ GPIB0 (ADR 8), FW REV 3.21 Turntable: Turntable [EMCO Turntable] @ GPIB0 (ADR 9), SN 29799, FW REV 3.21 Page 19 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Full Spectrum 120 110 100 90 80 EN 300 422 TRANSMITTER Level in dBµV/m 70 60 50 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Critical Frequencies Frequency MaxPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. Comment Corr. (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB/ (dB) (ms) m) 662.892667 109.24 53.00 -56.24 --- --- 175.0 V 153.0 --- 9:04:04 AM - 3/29/2018 --- Final Frequencies Frequency QuasiPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. Comment Corr. (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB/m) (dB) (ms) 662.892667 109.25 53.00 -56.25 1000.0 120.000 175.0 V 153.0 22.2 9:04:09 AM - 3/29/2018 --- Page 20 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A SHURE Radiated RF Emissions Test Report Common Information Test Description: FCC15C Radiated Emissions 1GHz - 10GHz EUT: P10T L8A Serial Number: #1 Operating Frequency: 662.875MHz Power Level / Mod Mode: 10mW Name: Alex Mishinger Comments: Tested on February 22, 2018 EMI Auto Test Template: COMPLIANCE TEST EN300422 Transmitter 1GHz to 10GHz 3117-PA 200363 EU Hardware Setup: Electric Field Strength 3117-PA 200363 2017 10 17 Measurement Type: Open-Area-Test-Site Frequency Range: 1 GHz - 10 GHz Graphics Level Range: 0 dBµV/m - 120 dBµV/m Preview Measurements: Antenna height: 100 - 400 cm , Step Size = 50 cm , Positioning Speed = 6 Polarization: H+V Turntable position: 0 - 360 deg , Continuously , Measuring Speed = 5 Graphics Display: Show separate traces for horizontal and vertical polarization Sweep Test Template: COMPLIANCE TEST EN300422 Transmitter 1-18 GHz 3117-PA 200363 PREVIEW Adjustment: Antenna height: Range = 50 cm , Measuring Speed = 1 Turntable position: Range = 90 deg , Measuring Speed = 5 Template for Single Meas.: COMPLIANCE TEST EN300422 Transmitter 1 to 18 GHz 3117- PA 200363 MAX Final Measurements: Template for Single Meas.: COMPLIANCE TEST EN300422 Transmitter 1 to 18 GHz 3117- PA 200363 FINAL Subrange Step Size Detectors IF BW Meas. Time Preamp Receiver: [ESR 26] 1 GHz - 18 GHz 250 kHz AVG 1 MHz 1s 0 dB Page 21 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Hardware Setup: EMI radiated\Electric Field Strength 3117-PA 200363 - [EMI radiated] Subrange 1 Frequency Range: 1 GHz - 18 GHz Receiver: ESR 26 [ESR 26] @ GPIB0 (ADR 20), SN 1316.3003K26/101347, FW 2.26, CAL 5/28/2016 Signal Path: Receiver-EMI to 18 GHz FW 1.0 Correction Table: Receiver-EMI Antenna TEMP 2016 11 23 Antenna: EMI3117-PA 200385 SN 200385, CAL 10/16/2018 Correction Table (vertical): Horn ETS 3117-PA 200363 2017 10 16 Correction Table (horizontal): Horn ETS 3117-PA 200363 2017 10 16 Correction Table (vertical): L23_041_47 Cable Correction Table (horizontal): L23_041_47 Cable Antenna Tower: Tower [EMCO 2090 Antenna Tower] @ GPIB0 (ADR 8), FW REV 3.21 Turntable: Turntable [EMCO Turntable] @ GPIB0 (ADR 9), SN 29799, FW REV 3.21 Page 22 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Full Spectrum 120 110 3.977200000 GHz 100 2.651500000 GHz 35.181 dBµV/m 1.325800000 GHz 35.500 dBµV/m 31.206 dBµV/m 90 80 EN 300 422 TRANSMITTER Level in dBµV/m 70 60 50 40 30 20 4.640200000 GHz 10 1.988500000 GHz 3.314500000 GHz 37.058 dBµV/m 28.691 dBµV/m 36.257 dBµV/m 0 1G 2G 3G 4G 5G 6 7 8 9 10G Frequency in Hz Critical Frequencies Frequency MaxPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. Comment Corr. (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB/ (dB) (ms) m) 1325.800000 31.21 77.00 45.79 --- --- 225.0 V 136.0 --- 2:08:29 PM - 2/22/2018 --- 1988.500000 28.69 77.00 48.31 --- --- 124.0 V 44.0 --- 2:07:16 PM - 2/22/2018 --- 2651.500000 35.50 77.00 41.50 --- --- 372.0 H 5.0 --- 2:05:04 PM - 2/22/2018 --- 3314.500000 36.26 77.00 40.74 --- --- 172.0 H 149.0 --- 2:02:27 PM - 2/22/2018 --- 3977.200000 35.18 77.00 41.82 --- --- 333.0 H 72.0 --- 2:05:56 PM - 2/22/2018 --- 4640.200000 37.06 77.00 39.94 --- --- 162.0 H 169.0 --- 2:03:35 PM - 2/22/2018 --- Final Frequencies Frequency Average Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. Comment Corr. (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB/m) (dB) (ms) 1325.800000 20.62 77.00 56.38 1000.0 1000.000 225.0 V 136.0 -16.2 2:08:36 PM - 2/22/2018 --- 1988.500000 17.78 77.00 59.22 1000.0 1000.000 125.0 V 44.0 -13.1 2:07:22 PM - 2/22/2018 --- 2651.500000 25.36 77.00 51.64 1000.0 1000.000 375.0 H 5.0 -11.9 2:05:10 PM - 2/22/2018 --- 3314.500000 25.44 77.00 51.56 1000.0 1000.000 175.0 H 149.0 -11.0 2:02:32 PM - 2/22/2018 --- 3977.200000 25.92 77.00 51.08 1000.0 1000.000 333.0 H 72.0 -8.8 2:06:05 PM - 2/22/2018 --- 4640.200000 27.33 77.00 49.67 1000.0 1000.000 162.0 H 169.0 -7.1 2:03:43 PM - 2/22/2018 --- Page 23 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Date: February 27, 2018 EUT: P10T Band: L8A Serial Number: #1 Specification: EN 300 422-1, Spurious Radiated Emissions Comments: Test Distance is 3 meters Mode: EUT set to Low 657.125 MHz Tested By: Alex Mishinger, February 26 & 27, 2018 Matched Measured Antenna Cable ERP ETSI Frequency Detector Antenna Sig. Gen. Used Level in Gain Loss Total Limit in MHz Polarity Reading dBuV in dB in dB in dBm in dBm in dBm 1314.100 Average H 20.81 -76.0 3.8 2.86 -75.1 -30 1314.100 Average V 20.81 -76.0 3.8 2.86 -75.1 -30 1971.400 Average H 16.84 -76.0 5.3 3.63 -74.3 -30 1971.400 Average V 16.84 -76.0 5.3 3.63 -74.3 -30 2628.400 Average H 24.95 -73.0 6.0 4.18 -71.2 -30 2628.400 Average V 24.95 -73.0 6.0 4.18 -71.2 -30 3285.700 Average H 25.48 -73.0 7.0 4.34 -70.3 -30 3285.700 Average V 25.48 -73.0 7.0 4.34 -70.3 -30 3942.700 Average H 26.48 -73.0 8.2 4.99 -69.8 -30 3942.700 Average V 26.48 -73.0 8.2 4.99 -69.8 -30 4599.700 Average H 26.93 -73.0 9.3 5.23 -68.9 -30 4599.700 Average V 26.93 -73.0 9.3 5.23 -68.9 -30 Total (dBm) = Matched Signal. Generator Reading (dBm) + Antenna Gain (dB) – Cable Loss (dB) Page 24 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix A Date: February 27, 2018 EUT: P10T Band: L8A Serial Number: #1 Specification: EN 300 422-1, Spurious Radiated Emissions Comments: Test Distance is 3 meters Mode: EUT set to High 662.875 MHz Tested By: Alex Mishinger, February 26 & 27, 2018 Matched Measured Antenna Cable ERP ETSI Frequency Detector Antenna Sig. Gen. Used Level in Gain Loss Total Limit in MHz Polarity Reading dBuV in dB in dB in dBm in dBm in dBm 1325.800 Average H 20.62 -77.0 3.8 3.79 -77.0 -30 1325.800 Average V 20.62 -77.0 3.8 3.79 -77.0 -30 1988.500 Average H 17.78 -77.0 5.3 3.53 -75.2 -30 1988.500 Average V 17.78 -77.0 5.3 3.53 -75.2 -30 2651.500 Average H 25.36 -76.0 6.0 4.23 -74.2 -30 2651.500 Average V 25.36 -76.0 6.0 4.23 -74.2 -30 3314.500 Average H 25.44 -74.3 7.0 4.37 -71.7 -30 3314.500 Average V 25.44 -74.3 7.0 4.37 -71.7 -30 3977.200 Average H 25.92 -75.5 8.2 5.00 -72.3 -30 3977.200 Average V 25.92 -75.5 8.2 5.00 -72.3 -30 4640.200 Average H 27.33 -70.0 9.3 5.55 -66.3 -30 4640.200 Average V 27.33 -70.0 9.3 5.55 -66.3 -30 Total (dBm) = Matched Signal. Generator Reading (dBm) + Antenna Gain (dB) – Cable Loss (dB) Page 25 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix B B. Maximum Radiated Power Purpose: This test performed to determine if the EUT meets the Maximum Radiated Power requirements of the FCC Part15C, Section 15.236. Requirements: As stated in FCC 15C Section 15.236 (6)(2), the maximum radiated power in the 600MHz guard band and the 600MHz duplex gap: 20mW EIRP. Measurement Uncertainty: All measurements are an estimate of their true value. The measurement uncertainty characterizes, with a specified confidence level, the spread of values which may be possible for a given measurement system. Values of Expanded Measurement Uncertainty (95% Confidence) Measurement Type Ulab Conducted measurements (30 MHz – 1000 MHz) 1.24 dB Ulab = Determined for Shure EMC Laboratory Since Ulab is less than or equal to UETSI: - Compliance is deemed to occur if no measured disturbance exceeds the disturbance limit; Non-compliance is deemed to occur if any measured disturbance exceeds the disturbance limit. Test Setup and Instrumentation: Photographs of the test setup are shown in Figure 1. The test instrumentation can be determined from Table 10-1. EUT Operation: The EUT was powered up and the frequency of the transmitter was selected using the front panel controls. For rated output power, the testing was conducted with the EUT set to the low and high frequencies, at 10mW RF output. Page 26 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix B Specific Test Procedures: The output of the EUT was connected to a spectrum analyzer through 20dB of attenuation. The EUT was set to transmit on the low and high frequencies. The channel power was measured. The spectrum analyzer was set to: RBW 10kHz VBW 100kHz Channel BW 200kHz Span 1MHz Detector Average State Average Results: The EIRP for all frequencies measured meets the FCC15C 15.236 requirements. Figure 1: Test setup for Maximum Radiated Output Page 27 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix B Test Information EUT Name: P10T L8A Serial Number: #1 Test Description: Maximum Rated Output Operating Conditions: Low Frequency, 657.125MHz, 10mW Operator Name: Craig Kozokar Comment: FCC Part15C, Section 15.236 Date Tested: Tested on March 13, 2018 Power Meter Measured Antenna Cable Loss EIRP EIRP Margin Measurement Gain in dB in dBm Limit In dB in dBm in dBi in dBm +8.82 +1.15 0.40 +10.37 13.00 2.63 EIRP (dBm) = Measurement (dBm) + Measured Antenna Gain (dB) + Cable Loss (dB) Measured P10T L8A antenna gain is 1.15dBi Test Information EUT Name: P10T L8A Serial Number: #1 Test Description: Maximum Rated Output Operating Conditions: High Frequency, 662.875MHz, 10mW Operator Name: Craig Kozokar Comment: FCC Part15C, Section 15.236 Date Tested: Tested on March 8, 2018 Power Meter Measured Antenna Cable Loss EIRP EIRP Margin Measurement Gain in dB in dBm Limit In dB in dBm in dBi in dBm +8.95 +1.15 0.40 +10.50 13.00 2.50 EIRP (dBm) = Measurement (dBm) + Measured Antenna Gain (dB) + Cable Loss (dB) Measured P10T L8A antenna gain is 1.15dBi Page 28 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix C NECESSARY BANDWIDTH MEASUREMENTS C.1 PURPOSE This test was performed to determine if the EUT meets the necessary bandwidth requirements of EN 300 422-1, section 8.3.3., with the EUT operating at 660.000MHz. C.2 REQUIREMENTS As stated in EN 300 422-1, section 8.3.3, the emission mask given in section 8.3.3.2 shall not be exceeded. C.3 TEST SETUP AND INSTRUMENTATION A photograph of the test setup is shown in Figure B-1. The test instrumentation can be determined from Table 10-1. C.4 MEASUREMENT UNCERTAINTY All measurements are an estimate of their true value. The measurement uncertainty characterizes, with a specified confidence level, the spread of values which may be possible for a given measurement system. Values of Expanded Measurement Uncertainty (95% Confidence): Measurement Type ULAB Necessary Bandwidth ±0.130 % Ulab = Determined for Shure EMC Laboratory Since ULAB is less than or equal to UETSI: - Compliance is deemed to occur if no measured disturbance exceeds the disturbance limit; - Non-compliance is deemed to occur if any measured disturbance exceeds the disturbance limit. C.5 EUT OPERATION The EUT was powered up and the transmit frequency and power output of the EUT were selected. The EUT was checked for proper operation after it was setup for the test. Testing was conducted with the EUT set to transmit at 660.000MHz, at an output power level of 10mW. The transmitter was modulated per EN300422-1 V1.4.2 (2011-08), clause 7.1.2. C.6 TEST PROCEDURE The test procedure followed is shown in EN300422-1 V1.4.2 (2011-08), section 8.3.3.1. Page 29 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix C C.7 RESULTS The necessary bandwidth data is presented on page 31. Data is shown on the figures for each transmitter. The figure shows the maximum relative level within the emission mask with modulation. As shown by the test data, the necessary bandwidth of the EUT meets the requirements of EN 300 422-1, section 8.3.3. [KC1] Figure B-1 Test Setup for Necessary Bandwidth Page 30 of 31

Engineering Test Report No. SEL-030/P10T L8A FCC15C Appendix C Test Information EUT Name: AXT100 J8A Serial Number: #1 Test Description: EN 300 422 Digital Necessary Bandwidth Operating Conditions: High Frequency, 660.000MHz, 10mW Operator Name: Juan Castrejon Comment: 88.3.3.1: Step 2;Maximum Relative Level Date Tested: Tested on January 11, 2018 Page 31 of 31


Document Created: 2018-10-31 11:10:11
Document Modified: 2018-10-31 11:10:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC