15U21180-E2V3 FCC IC Report WWAN

FCC ID: C9O-QOLL2

Test Report

Download: PDF

FCCID_2804795

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

Revision History

Issue
Rev. Date Revisions Revised By

Initial Issue ( This report contain spot check test data of
V1 10/20/15 C.OOI
Qollector2)

V2 10/22/15 Add full radiated testing result to test report. C.OOI

V3 11/03/15 Revised Page 7 C.OOI

Page 2 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

TABLE OF CONTENTS
1. ATTESTATION OF TEST RESULTS ............................................................................. 4
2. TEST METHODOLOGY ................................................................................................. 5
3. FACILITIES AND ACCREDITATION ............................................................................. 5
4. CALIBRATION AND UNCERTAINTY ............................................................................ 6
4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 6
4.2. SAMPLE CALCULATION ............................................................................................ 6
4.3. MEASUREMENT UNCERTAINTY ............................................................................... 6
5. EQUIPMENT UNDER TEST .......................................................................................... 7
5.1. DESCRIPTION OF EUT .............................................................................................. 7
5.2. MAXIMUM OUTPUT POWER...................................................................................... 7
5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 7
5.4. DESCRIPTION OF TEST SETUP ................................................................................ 8
6. TEST AND MEASUREMENT EQUIPMENT ..................................................................10
7. RADIATED TEST RESULTS ........................................................................................11
7.1. RADIATED POWER (ERP & EIRP) ............................................................................11
7.1.1. ERP/EIRP Results ...............................................................................................13
7.2. FIELD STRENGTH OF SPURIOUS RADIATION........................................................20
7.2.1. SPURIOUS RADIATION PLOTS .........................................................................21
8. SETUP PHOTOS ..........................................................................................................28

Page 3 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

2. TEST METHODOLOGY
The tests documented in this report were performed in accordance with TIA-603-C, FCC CFR 47 Part 22,
FCC CFR Part 24 and FCC CFR 47 Part 27.

Qollector2 device contain FCC: R17HE910 full modular approved module the system. This report only
contains fundamental ERP/EIRP and harmonic spurious radiated test data. For antenna port conducted
test data, please refer to FCC: R17HE910 radio module report.

3. FACILITIES AND ACCREDITATION

The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia
Street, Fremont, California, USA. Line conducted emissions are measured only at the 47173 address.
The following table identifies which facilities were utilized for radiated emission measurements
documented in this report. Specific facilities are also identified in the test results sections.

47173 Benicia Street 47266 Benicia Street

Chamber A(IC: 2324B-1) Chamber D(IC: 2324B-4)

Chamber B(IC: 2324B-2) Chamber E(IC: 2324B-5)

Chamber C(IC: 2324B-3) Chamber F(IC: 2324B-6)

Chamber G(IC: 2324B-7)

Chamber H(IC: 2324B-8)

UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of
accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm.

Page 5 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

4. CALIBRATION AND UNCERTAINTY
4.1. MEASURING INSTRUMENT CALIBRATION
The measuring equipment utilized to perform the tests documented in this report has been calibrated in
accordance with the manufacturer's recommendations, and is traceable to recognized national
standards

4.2. SAMPLE CALCULATION
Where relevant, the following sample calculation is provided:

EIRP = PSA reading with EUT worst orientation (dBm) + Path loss (dB) – cable loss(
between the SG and substitution antenna) + Substitution Antenna Factor (dBi)

ERP = PSA reading with EUT worst orientation (dBm) + Path loss (dB) – cable loss(
between the SG and substitution antenna)

(Path loss = Signal generator output – PSA reading with substitution antenna)

4.3. MEASUREMENT UNCERTAINTY
Where relevant, the following measurement uncertainty levels have been estimated for tests performed
on the apparatus:

PARAMETER UNCERTAINTY

Conducted Disturbance, 0.15 to 30 MHz ± 3.52 dB

Radiated Disturbance, 30 to 1000 MHz ± 4.94 dB

Radiated Disturbance, 1GHz to 40GHz ± 4.94 dB

Radiated Disturbance, 1 to 6 GHz ± 3.86 dB

Radiated Disturbance, 6 to 18 GHz ± 4.23 dB

Radiated Disturbance, 18 to 26 GHz ± 5.30 dB

Radiated Disturbance, 26 to 40 GHz ± 5.23 dB

Uncertainty figures are valid to a confidence level of 95%.

Page 6 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

5. EQUIPMENT UNDER TEST
5.1. DESCRIPTION OF EUT
The EUT is a GSM/WCDMA and ANT+ device.

5.2. MAXIMUM OUTPUT POWER
The transmitter has a maximum peak conducted and radiated ERP / EIRP output powers as follows:

FCC Part 22/24/27
Frequency Radiated
Band Modulation
Range(MHz) AVG(dBm) AVG(mW)
824~849 GPRS 34.67 2930.89
GSM850
824~849 EGPRS 28.31 677.64

1850~1910 GPRS 30.34 1081.43
GSM1900
1850~1910 EGPRS 25.78 378.44

Band 5 824~849 REL99 22.82 191.43

Band 4 1710~1755 REL99 21.18 131.22

Band 2 1850~1910 REL99 22.53 179.06

5.3. DESCRIPTION OF AVAILABLE ANTENNAS
The radio utilizes a PIFA antenna for the [List the bands supported] with a maximum peak gain as follow:

Frequency (MHz) Peak Gain (dBi)

GSM850, 824~849MHz 1.49

GSM1900, 1850~1910MHz 2.3

Band 5, 824~849MHz 1.49

Band 4, 1710~1755MHz 2.53

Band 2, 1850~1910MHz 2.3

Page 7 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

5.4. DESCRIPTION OF TEST SETUP

SUPPORT EQUIPMENT & PERIPHERALS

I/O CABLES

I/O CABLE LIST
Cable Port # of Connector Cable Cable Remarks
No. Identical Type Type Length
Ports m
1 USB 1 USB Shielded 1 AC Adapter

TEST SETUP

The EUT is continuously communicated to the call box during the tests.

Page 8 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

7. RADIATED TEST RESULTS
7.1. RADIATED POWER (ERP & EIRP)

RULE PART(S)
FCC: §2.1046, §22.913, §24.232, §27 and § 90.635.

LIMITS
22.913(a) - The ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 Watts.
24.232(c) - Mobile/portable stations are limited to 2 watts e.i.r.p. peak power and the equipment must employ
means to limit the power to the minimum necessary for successful communications.
27.50(d) - (4) Fixed, mobile, and portable (hand-held) stations operating in the 1710-1755 MHz band and mobile
and portable stations operating in the 1695-1710 MHz and 1755-1780 MHz bands are limited to 1 watt EIRP.(Band
4)

In addition, when the transmitter power is measured in terms of average value, the peak-to-average ratio of the
power shall not exceed 13dB.

TEST PROCEDURE

ANSI / TIA / EIA 603C Clause 2.2.17; PSA setting reference to 971168 D01 v02r02

For peak power measurement with a PSA:

a) Set the RBW ≥ OBW; b) Set VBW ≥ 3 × RBW; c) Set span ≥ 2 x RBW; d) Sweep time = auto couple; e) Detector =
peak; f) Ensure that the number of measurement points ≥ span/RBW; g) Trace mode = max hold;

For average power measurement with a PSA:

a) Set span to at least 1.5 times the OBW; b) Set RBW = 1-5% of the OBW, not to exceed 1 MHz; c) Set VBW ≥ 3 x
RBW; d) Set number of points in sweep ≥ 2 × span / RBW; e) Sweep time = auto-couple; f) Detector = RMS (power
averaging); g) Use free run trigger If burst duty cycle ≥ 98; h) Use trigger to capture bursts If burst duty cycle < 98; i)
Trace average at least 100 traces in power averaging (i.e., RMS) mode. j) Compute the power by integrating the
spectrum across the OBW of the signal using the instrument’s band power measurement function.

MODES TESTED
GSM, WCDMA, and LTE

TEST RESULTS

Page 11 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

GSM
Band Mode Channel f(MHz) ERP / EIRP
dBm mW
512 1850.2 29.44 879.02
GPRS 661 1880 29.64 920.45

GSM1900 810 1909.8 30.34 1081.43
512 1850.2 24.84 304.79
EGPRS 661 1880 25.03 318.42
810 1909.8 25.78 378.44

Band Mode Channel f(MHz) ERP / EIRP
dBm mW
128 824.2 34.67 2930.89
GPRS 190 836.6 34.21 2636.33

GSM850 251 848.8 33.18 2079.70
128 824.2 28.31 677.64
EGPRS 190 836.6 27.58 572.80
251 848.8 26.44 440.55

WCDMA

Band Mode Channel f(MHz) ERP / EIRP
dBm mW
9262 1852.4 21.13 129.72
Band 2 REL99 9400 1880 21.80 151.36
9538 1907.6 22.53 179.06

Band Mode Channel f(MHz) ERP / EIRP
dBm mW
1312 1712.4 21.18 131.22
Band 4 REL99 1413 1732.6 20.42 110.15
1513 1752.6 21.16 130.62

Band Mode Channel f(MHz) ERP / EIRP
dBm mW
4132 826.4 22.82 191.43
Band 5 REL99 4183 836.6 21.97 157.40
4233 846.6 20.62 115.35

Page 12 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

REPORT NO: 15I21237-E2V3 DATE: NOVEMBER 03, 2015
FCC ID: C9O-QOLL2 IC ID: 10161A-QOLL2

7.2. FIELD STRENGTH OF SPURIOUS RADIATION

RULE PART(S)
FCC: §2.1053, §22.917, §24.238, §27.53 and §90.691

LIMIT
The power of any emission outside of the authorized operating frequency ranges must be attenuated below the
transmitting power (P) by a factor of at least 43 + 10 log (P) dB.

Part 27: (m)(4) (4) For mobile digital stations, the attenuation factor shall be not less than 40 + 10 log (P) dB on all
frequencies between the channel edge and 5 megahertz from the channel edge, 43 + 10 log (P) dB on all
frequencies between 5 megahertz and X megahertz from the channel edge, and 55 + 10 log (P) dB on all
frequencies more than X megahertz from the channel edge, where X is the greater of 6 megahertz or the actual
emission bandwidth as defined in paragraph (m)(6) of this section. In addition, the attenuation factor shall not be
less that 43 + 10 log (P) dB on all frequencies between 2490.5 MHz and 2496 MHz and 55 + 10 log (P) dB at or
below 2490.5 MHz. Mobile Satellite Service licensees operating on frequencies below 2495 MHz may also submit a
documented interference complaint against BRS licensees operating on channel BRS Channel 1 on the same terms
and conditions as adjacent channel BRS or EBS licensees.

TEST PROCEDURE
For Cellular equipment - Compliance with these rules is based on the use of measurement instrumentation
employing a resolution bandwidth of 100 kHz or greater. In the 1 MHz bands immediately outside and adjacent to
the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental
emission of the transmitter may be employed. A narrower resolution bandwidth is permitted in all cases to
improve measurement accuracy provided the measured power is integrated over the full required measurement
bandwidth (i.e. 100 kHz or 1 percent of emission bandwidth, as specified). The emission bandwidth is defined as
the width of the signal between two points, one below the carrier center frequency and one above the carrier
center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power.

For PCS equipment - Compliance with these rules is based on the use of measurement instrumentation employing
a resolution bandwidth of 1 MHz or greater. However, in the 1 MHz bands immediately outside and adjacent to
the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental
emission of the transmitter may be employed. A narrower resolution bandwidth is permitted in all cases to
improve measurement accuracy provided the measured power is integrated over the full required measurement
bandwidth (i.e. 1 MHz or 1 percent of emission bandwidth, as specified). The emission bandwidth is defined as the
width of the signal between two points, one below the carrier center frequency and one above the carrier center
frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power.

MODES TESTED
GSM, WCDMA, and LTE

RESULTS

Page 20 of 28
UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888
This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

Document Created: 2019-11-12 20:13:44
Document Modified: 2019-11-12 20:13:44

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC