Test report(DFS)

FCC ID: BKEHAC001

Test Report

Download: PDF
FCCID_3239282

Test report No. : 11334871S-G-R1 Page : 1 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 RADIO TEST REPORT Test Report No. : 11334871S-G-R1 Applicant : Nintendo Co., Ltd. Type of Equipment : Game Console Model No. : HAC-001 FCC ID : BKEHAC001 Test regulation : FCC Part 15 Subpart E: 2016 Section 15.407(DFS test only) Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. The test results in this test report are traceable to the national or international standards. 5. This test report must not be used by the customer to claim product certification, approval, or endorsement by any agency of the Federal Government. 6. The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan has been accredited. 7. This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable) 8. This report is a revised version of 11334871S-G. 11334871S-G is replaced with this report. Date of test : December 5 to 6, 2016 ____________________________________ Representative test engineer: Kenichi Adachi Engineer Consumer Technology Division Approved by : Akio Hayashi Leader Consumer Technology Division RTL02610 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan. There is no testing item of "Non-accreditation". UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401 13-EM-F0429

Test report No. : 11334871S-G-R1 Page : 2 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 REVISION HISTORY Original Test Report No.: 11334871S-G Revision Test report No. Date Page revised Contents - 11334871S-G December 14, 2016 - - (Original) 1 11334871S-G-R1 December 22, 2016 - Update (Full Revision) UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 3 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 CONTENTS PAGE SECTION 1: Customer information ............................................................................................ 4 SECTION 2: Equipment under test (E.U.T.) .............................................................................. 4 SECTION 3: Scope of Report ....................................................................................................... 5 SECTION 4: Test specification, procedures & results ............................................................... 5 SECTION 5: Operation of E.U.T. during testing........................................................................ 10 SECTION 6: In-Service Monitoring for Channel Move Time, Channel Closing Transmission Time .................................................................................................................................................. 17 SECTION 7: In-Service Monitoring for Non-Occupancy Period ............................................. 23 APPENDIX 1: Test instruments .................................................................................................... 28 APPENDIX 2: Photographs of test setup...................................................................................... 29 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 4 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 SECTION 1: Customer information Company Name : Nintendo Co., Ltd. Address : 11-1 Hokotate-cho, Kamitoba, Minami-ku, Kyoto 601-8501, Japan Telephone Number : +81-75-662-9600 Facsimile Number : +81-75-662-9624 Contact Person : Kazuya Kuramoto SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Game Console Model No. : HAC-001 Serial No. : Refer to Section 5.2 Rating : DC 3.7 V (battery), AC Adapter input: AC 100 – 240 V, 50 / 60 Hz, 1 A, AC Adapter output: DC 5 V – DC 15 V, 2.6 A Receipt Date of Sample : August 3, 2016 Country of Mass-production : China Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product description Model: HAC-001 (referred to as the EUT in this report) is a Game console. General Specification Clock frequency(ies) in the system : 37.4 MHz Radio Specification Radio Type : Transceiver Frequency of Operation : Wireless LAN part: 2412 MHz - 2472 MHz, W52: 5180 MHz -5240 MHz, W53: 5260 MHz -5320 MHz, W56: 5500 MHz -5700 MHz *, W58: 5745 MHz -5825 MHz *, Bluetooth part: 2402 MHz - 2480 MHz Modulation : Wireless LAN part: 2.4 GHz bands: DBPSK, DQPSK, CCK, OFDM 5 GHz bands: OFDM Bluetooth part: BDR (Baisc Data Rate): GFSK EDR (Enhanced Data Rate): π/4-DQPSK, 8DPSK LE (Low Energy mode): GFSK Antenna type : PCB Antenna (Dipole) Antenna connector : (Ant: 0): MHF 4L, (Ant: 1): MHF II Antenna Gain : 2.4 GHz band: -0.70 dBi max (ANT0: Wireless LAN & Bluetooth), -8.38 dBi max (ANT1: Wireless LAN) 5 GHz band: +3.31 dBi max (ANT0: Wireless LAN), -0.96 dBi max (ANT1: Wireless LAN) Operation temperature : +5 deg.C to +35 deg.C Remarks: This Wireless Module consists of 1 chip each of 5 GHz band and 2.4 GHz band. *This model does not have 40MHz Bandwidth mode on W56 and W58. UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 5 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 SECTION 3: Scope of Report The EUT has the channels from 5180 MHz to 5320MHz and 5500 MHz to 5700 MHz. This report only covers DFS requirement subject to 5250 MHz to 5350 MHz and 5500 MHz to 5700 MHz bands, as specified by the following referenced procedures. SECTION 4: Test specification, procedures & results 4.1 Test Specification Test specification : FCC Part 15 Subpart E: 2016, November 14, 2016 and effective December 14, 2016 * Title : FCC 47CFR Part15 Radio Frequency Device Subpart E Unlicensed National Information InfrastructurGame Consoleices Section 15.407 General technical requirements * The revision on November 14, 2016, does not affect the test specification applied to the EUT. Test Specification : KDB 905462 D02 v02 Title : COMPLIANCE MEASUREMENT PROCEDURES FOR UNILICENSED -NATIONAL INFORMATION INFRASTRUCTURGAME CONSOLEICES OPERATING IN THE 5250 - 5350 MHz AND 5470 - 5725 MHz BANDS INCORPORATING DYNAMIC FREQUENCY SELECTION FCC Part 15.31 (e) This EUT provides stable voltage (DC 3.3 V) constantly to RF Part regardless of input voltage. Therefore, this EUT complies with the requirement. FCC Part 15.203 Antenna requirement It is impossible for end users to replace the antenna, because the antenna is mounted inside of the EUT. Therefore, the equipment complies with the antenna requirement of Section 15.203. UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 6 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 4.2 Procedures and results Table 2: Applicability of DFS Requirements Requirement Operating Mode Test Procedures & Deviation Results Client without Limits Radar Detection U-NII Detection Not required FCC, KDB 905462 D02 N/A N/A Bandwidth Section 7.8.1 Initial Channel Not required FCC15.407 (h)(2) N/A N/A Availability Check FCC, KDB 905462 D02 Time Section 7.8.2.1 RSS-247 6.3 Radar Burst at the Not required FCC15.407 (h)(2) N/A N/A Beginning of the FCC, KDB 905462 D02 Channel Availability Section 7.8.2.2 Check Time RSS-247 6.3 Radar Burst at the Not required FCC15.407 (h)(2) N/A N/A End of the Channel FCC, KDB 905462 D02 Availability Check Section 7.8.2.3 Time RSS-247 6.3 In-Service Monitoring Yes FCC15.407 (h)(2) N/A Complied for Channel Move FCC, KDB 905462 D02 Time, Channel Section 7.8.3 Closing Transmission Time RSS-247 6.3 In-Service Monitoring Yes * FCC15.407 (h)(2) N/A Complied for Non-Occupancy FCC, KDB 905462 D02 period Section 7.8.3 RSS-247 6.3 Statistical Not required FCC15.407 (h)(2) N/A N/A Performance Check FCC, KDB 905462 D02 Section 7.8.4 *Although this test was not required in FCC, KDB 905462 D02, it was performed as additional test. Table 3: DFS Detection Thresholds for Master Devices and Client Devices With Radar Maximum Transmit Power Value (See Notes 1, 2 and 3) E.I.R.P. ≥ 200 milliwatt -64 dBm E.I.R.P. < 200 milliwatt and -62 dBm power spectral density < 10dBm/MHz E.I.R.P. < 200 milliwatt that do not meet the power -64 dBm spectral density requirement Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Note 3: E.I.R.P. is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911 D01. UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 7 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Table 4: DFS Response Requirement Values Parameter Value Non-occupancy period Minimum 30 minutes Channel Availability Check Time 60 seconds Channel Move Time 10 seconds See Note 1 Channel Closing Transmission Time 200 milliseconds + an aggregate of 60 milliseconds over remaining 10 second period. See Notes 1 and 2 U-NII Detection Bandwidth Minimum 100 % of the U-NII 99 % transmission power bandwidth See Note 3 Note 1: The Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signal will not count quiet periods in between transmissions. Note 3: During the U-NII Detection Bandwidth detection test, radar type 0 should be used. For each frequency step the minimum percentage of detection is 90 percent. Measurements are performed with no data traffic. Table 5 Short Pulse Radar Test Waveform Radar Type Pulse Width PRI [µs] Number of Pulses Minimum Minimum [µs] Percentage of Number of Successful Traials Detection 0 1 1428 18 See Note 1 See Note 1 1 1 Test A: 15 unique Roundup ( 60 % 30 PRI values (1 / 360) randomly selected x ( (19 x 10^6 ) from the list of 23 / PRI [micro sec.] PRI values in )) Table 5a Test B: 15 unique PRI values randomly selected within the range of 518 - 3066 micro sec., with a minimum increment of 1 micro sec., excluding PRI values selected in Test A 2 1-5 150 - 230 23 - 29 60 % 30 3 6 - 10 200 - 500 16 - 18 60 % 30 4 11 - 20 200 - 500 12 - 16 60 % 30 Aggregate (Rader Types 1-4) 80 % 120 Note 1: Short Pulse Radar Type 0 should be used for the detection bandwidth test, channel move time, and channel closing time tests. UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 8 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Table 5a Pulse Repetition Interval Values for Test A Pulse Repetition Pulse Repetition Frequency Pulse Repetition Interval Frequency Number (Pulses Per Second) (Micro seconds) 1 1930.5 518 2 1858.7 538 3 1792.1 558 4 1730.1 578 5 1672.2 598 6 1618.1 618 7 1567.4 638 8 1519.8 658 9 1474.9 678 10 1432.7 698 11 1392.8 718 12 1355 738 13 1319.3 758 14 1285.3 778 15 1253.1 798 16 1222.5 818 17 1193.3 838 18 1165.6 858 19 1139 878 20 1113.6 898 21 1089.3 918 22 1066.1 938 23 326.2 3066 Table 6 Long Pulse Radar Test Waveform Radar Type Pulse Width Chip Width PRI [µs] Number of Number of Minimum Minimum [µs] [MHz] Pulses per Burst Percentage Number of Burst of Successful Trials Detection 5 50 - 100 5 - 20 1000 - 2000 1-3 8 - 20 80 % 30 Table 7 Frequency Hopping Radar Test Waveform Radar Type Pulse Width PRI [µs] Pulse per Hopping Hopping Minimum Minimum [µs] Hop [kHz] Rate [kHz] Sequence Percentage Number of Length [ms] of Successful Trials Detection 6 1 333 9 0.333 300 70 % 30 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 9 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 4.3 Test Location UL Japan, Inc. Shonan EMC Lab. 1-22-3, Megumigaoka, Hiratsuka-shi, Kanagawa-ken 259-1220 JAPAN Telephone number : +81 463 50 6400 Facsimile number : +81 463 50 6401 JAB Accreditation No. : RTL02610 Size of reference IC Maximum Width x Depth x ground plane (m) Registration measurement Height (m) / horizontal No. distance conducting plane No.1 Semi-anechoic chamber 2973D-1 20.6 x 11.3 x 7.65 20.6 x 11.3 10 m No.2 Semi-anechoic chamber 2973D-2 20.6 x 11.3 x 7.65 20.6 x 11.3 10 m No.3 Semi-anechoic chamber 2973D-3 12.7 x 7.7 x 5.35 12.7 x 7.7 5m No.4 Semi-anechoic chamber - 8.1 x 5.1 x 3.55 8.1 x 5.1 - No.1 Shielded room - 6.8 x 4.1 x 2.7 6.8 x 4.1 - No.2 Shielded room - 6.8 x 4.1 x 2.7 6.8 x 4.1 - No.3 Shielded room - 6.3 x 4.7 x 2.7 6.3 x 4.7 - No.4 Shielded room - 4.4 x 4.7 x 2.7 4.4 x 4.7 - No.5 Shielded room - 7.8 x 6.4 x 2.7 7.8 x 6.4 - No.6 Shielded room - 7.8 x 6.4 x 2.7 7.8 x 6.4 - No.8 shielded room - 3.45 x 5.5 x 2.4 3.45 x 5.5 - No.5 Shielded room - 2.55 x 4.1 x 2.5 - - 4.4 Uncertainty The following uncertainties have been calculated to provide a confidence level of 95 % using a coverage factor k = 2. Time Measurement uncertainty for this test was: (±) 0.012 % 4.5 Test set up, Data of DFS test, and Test instruments of DFS Refer to APPENDIX. UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 10 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 SECTION 5: Operation of E.U.T. during testing 5.1 Operating Modes The EUT, which is a Client Device without Radar detection capability, operates over the 5260 MHz - 5320 MHz and 5500 MHz to 5700 MHz. The EUT uses one transmitter connected to a 50 ohm coaxial antenna ports. The antenna port is connected to the test system. WLAN traffic is generated by iperf.exe (ver.2.0.5) tool some random data from the Master to the Client. (Channel loading was over 17 %) The EUT utilizes the IEEE 802.11a, IEEE 802.11n and IEEE 802.11ac architecture, with a nominal channel bandwidth. The EUT had used IEEE 802.11ac VHT80 (widest mode). The FCC ID for the Master Device used with EUT for DFS testing is LDK102087. The rated output power of the Master unit is > 200 mW(23 dBm). Therefore the required interference threshold level is –64 dBm. After correction for antenna gain and procedural adjustments, the required conducted threshold at the antenna port is –64 + 1 + 4= -59 dBm (threshold level + additional 1 dB + antenna gain *1)). *1) Minimum antenna gain of the Master Device (FCC ID: LDK102087, IC No.: 2461B-102087) 5.2 Configuration and peripherals *1) A: EUT Conducted 14 C K M method *1) system D 1 12 15 B L N AC 120 V / 60 Hz 13 16 : Standard Ferrite Core AC 100 V / 50 Hz *2) This radio communication with C to A and with D to A are Bluetooth communication, and it had no relation to communication of Wirelss LAN, and it was the one only of the purpose which does cursor operation of screen of A. UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 11 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Description of EUT and Support equipment No. Item Model number Serial number Manufacturer Remarks A Game Console HAC-001 XAW0150000761 Nintendo EUT (Type B) B AC Adapter HAC-002 - Nintendo - C Wireless Game Device HAC-015 XBL0150000240 Nintendo - D Wireless Game Device HAC-016 XCL0150000151 Nintendo - FCC ID: Wireless LAN access AIR-CAP3702E- K FTX18227609 Cisco Systems LDK102087 point (Master Device) A-K9 L AC Adapter AA25480L ALD02510FEW Cisco Systems - CN-0HP728-48643-83R- M Notebook Computer LATITUDE D530 Dell - 0675 CN-0YT886--73245-83R- N AC Adapter FA65NS0-00 Dell - 2744 Accessory and model differences The difference between Type A and Type B is as following table. The two crystals are compatible and are electrically identical having same radio parameters. Parts Manufacturer Type A Type B Crystal (X501) TXC DAISHINKU So, for the all tests, the E.U.T. was selected as a representative. List of cables used No. Cable Name Length (m) Shield Remarks Cable Connector 1 DC 1.5 Unshielded Unshielded - 12 Access Point DC Power 1.8 Unshielded Unshielded - 13 Access Point AC Power 1.8 Unshielded Unshielded - 14 LAN 3.0 Unshielded Unshielded - 15 DELL PC DC Power 1.9 Unshielded Unshielded - 16 DELL PC AC Power 0.85 Unshielded Unshielded - UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 12 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 5.3 Test and Measurement System SYSTEM OVERVIEW The measurement system is based on a conducted test method. The software selects waveform parameters from within the bounds of the signal type on a random basis using uniform distribution. The short pulse types 2, 3, and 4, the long pulse type 5, and the frequency hopping type 6 parameters are randomized at run-time. The signal monitoring equipment consists of a spectrum analyzer with the capacity to display 8001 bins on the horizontal axis. A time-domain resolution of 2 ms/bin is achievable with a 16 seconds sweep time, meeting the 10 seconds short pulse reporting criteria. The aggregate ON time is calculated by multiplying the number of bins above a threshold during a particular observation period by the dwell time per bin, with the analyzer set to peak detection. A time-domain resolution of 3 ms/bin is achievable with a 24 seconds sweep time, meeting the 22 seconds long pulse reporting criteria and allowing a minimum of 10 seconds after the end of the long pulse waveform. FREQUENCY HOPPING RADAR WAVEFORM GENERATING SUBSYSTEM The first 100 frequencies are selected out of the hopping sequence of the randomized 475 hop frequencies. Only a Burst that has the frequency falling within the receiver bandwidth of the tested U-NII device is selected among those frequencies. (Frequency-domain simulation). The radar waveform generated at the start time of the selected Burst (Time-domain simulation) is download to the Signal Generator. If all of the randomly selected 100 frequencies do not fall within the receiver bandwidth of the U-NII device, the radar waveform is not used for the test. CONDUCTED METHODS SYSTEM BLOCK DIAGRM To Spectrum Analyzer 10 MHz out Signal Generator Notebook Computer See Page 10 Power Splitters/ Power Combiners Splitters/ Attenuator Attenuator A D: Combiners (20 dB) (20 dB) B Attenuator See Page 10 (20 dB) Master C A, B: Power EUT Splitters/ Combiners (Client) Spectrum Analyzer From Signal Generator 10 MHz in MEASUREMENT SYSTEM FREQUENCY REFERENCE Lock the signal generator and the spectrum analyzer to the same reference sources as follows: Connect the 10 MHz OUT on the signal generator to the 10 MHz IN on the spectrum analyzer and set the spectrum analyzer 10 MHz In to On. UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 13 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 SYSTEM CALIBRATION Step 1: Set the system as shown in Figure 3 of KDB 905462 D02 section 7.2.2. Step 2: Adjust each attenuator to fulfill the following three conditions: - WLAN can be communicated, and - Rader detection threshold level is bigger than Client Device traffic level on the spectrum analyzer, and - Master Device traffic level is not displayed on the spectrum analyzer. Step 3: Terminate 50 ohm at B and C points, and connect the spectrum analyzer to the point A. (See the figure on page 12) At the point A, adjust the signal generator and spectrum analyzer to the center frequency of the channel to be measured. Download the applicable radar waveforms to the signal generator. Select the radar waveform, trigger a burst manually and measure the amplitude on the spectrum analyzer. Readjust the amplitude of the signal generator as required so that the peak level of the waveform is at a displayed level equal to the required or desired interference detection threshold. Separate signal generator amplitude settings are determined as required for each radar type. Step 4: Without changing any of the instrument settings, restore the system setting to Step 2 and adjust the Reference Level Offset of the spectrum analyzer to the level at Step 3. By taking the above steps 1 to 4, the spectrum analyzer displays the level of the signal generator as received at the antenna ports of the Master Device. See Clause 5.4 for Plots of Noise, Rader Waveforms, and WLAN signals. 5.4 Plots of Noise, Rader Waveforms, and WLAN signals Plots of System Noise Floor It was confirmed that the EUT did not transmit before having received appropriate control signals from a Master Device. UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 14 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Plots of System Noise Floor It was confirmed that the EUT did not transmit before having received appropriate control signals from a Master Device. Plots of Radar Waveforms Rader Type 0 Rader Type 0 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 15 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Plots of WLAN Traffic (11ac VHT80, SISO, duty about 24 %) Plots of WLAN Traffic (11ac VHT80, SISO, duty about 24 %) Plots of WLAN Traffic (11ac VHT80, MIMO, duty about 18 %) UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Aglent Aglent Ref ~50 dEm Ref ~50 dBn «Pook «Pook Los Los 10 10 46/ d8/ Ext Ref Ofist Ofist 7 0 48 I «s l ul 1 il inu uL pc£d—HIHL Lafly Lafly s1 se s1 se us fs us o anl an £0: £0: FTun FTun Center 5530 0 Center 5530 0 7 Span 0 He Res BH 3 Milz Seep 16 s (8001 pts) Res BH 3 Wls Seep 1 s 001 prs)

Test report No. : 11334871S-G-R1 Page : 17 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 SECTION 6: In-Service Monitoring for Channel Move Time, Channel Closing Transmission Time 6.1 Operating environment (December 5, 2016) (December 6, 2016) Test place : No.5 Shielded room , No.5 Shielded room Temperature : 23 deg.C , 23 deg.C Humidity : 62 %RH , 42 %RH 6.2 Test Procedure Transfer files from the Master Device to the Client Device on the tested channel during the entire period of the test. The Radar Waveform generator sends a Burst of pulses for one of the Short Pulse Radar Types 0 - 4 at levels defined , on the Operating Channel. An additional 1 dB is added to the radar test signal to ensure it is at or above the DFS Detection Threshold, accounting for equipment variations/errors. Observe the transmissions of the EUT at the end of the radar Burst on the Operating Channel for duration greater than 10 seconds. 6.3 Test data Radar Type 0 11ac VHT80, SISO, MCS 0 Test Item Unit Measurement Time Limit Results Channel Move Time *1) [s] 0.002 10.000 Pass Channel Closing Transmission Time *2) [ms] 0 60 Pass *1) Channel Move Time is calculated as follows: (Channel Move Time) = (End of Transmission) - (End of Burst) = 1.010 – 1.008 *2) Channel Closing Transmission Time is calculated from (End of Burst + 200 ms) to (End of Burst + 10 s) (Channel Closing Transmission Time) = (Number of analyzer bins showing transmission) x (dwell time per bin) = 0 x 2 [ms] UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 18 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Radar Type 0 11ac VHT80, SISO, MCS 0 Marker 1: - End of Burst : 1.008 s Marker 2: - End of Transmission : 1.010 s End of Burst End of Transmission UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 19 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Radar Type 0 11ac VHT80, MIMO, MCS 0 Test Item Unit Measurement Time Limit Results Channel Move Time *1) [s] 0.002 10.000 Pass Channel Closing Transmission Time *2) [ms] 0 60 Pass *1) Channel Move Time is calculated as follows: (Channel Move Time) = (End of Transmission) - (End of Burst) = 0.3703 – 0.3683 *2) Channel Closing Transmission Time is calculated from (End of Burst + 200 ms) to (End of Burst + 10 s) (Channel Closing Transmission Time) = (Number of analyzer bins showing transmission) x (dwell time per bin) = 0 x 2 [ms] Radar Type 0 11ac VHT80, MIMO, MCS 0 Marker 1: - End of Burst : 0.3683 s Marker 2: - End of Transmission : 0.3703 s End of Burst End of Transmission UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 20 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Radar Type 0 11ac VHT80, SISO, MCS 0 Test Item Unit Measurement Time Limit Results Channel Move Time *1) [s] 0.072 10.000 Pass Channel Closing Transmission Time *2) [ms] 0 60 Pass *1) Channel Move Time is calculated as follows: (Channel Move Time) = (End of Transmission) - (End of Burst) = 0.818 – 0.746 *2) Channel Closing Transmission Time is calculated from (End of Burst + 200 ms) to (End of Burst + 10 s) (Channel Closing Transmission Time) = (Number of analyzer bins showing transmission) x (dwell time per bin) = 0 x 2 [ms] Radar Type 0 11ac VHT80, SISO, MCS 0 Marker 1: - End of Burst : 0.746 s Marker 2: - End of Transmission : 0.818 s End of Burst End of Transmission UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 21 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 Radar Type 0 11ac VHT80, MIMO, MCS 0 Test Item Unit Measurement Time Limit Results Channel Move Time *1) [s] 0.010 10.000 Pass Channel Closing Transmission Time *2) [ms] 0 60 Pass *1) Channel Move Time is calculated as follows: (Channel Move Time) = (End of Transmission) - (End of Burst) = 0.388 – 0.378 *2) Channel Closing Transmission Time is calculated from (End of Burst + 200 ms) to (End of Burst + 10 s) (Channel Closing Transmission Time) = (Number of analyzer bins showing transmission) x (dwell time per bin) = 0 x 2 [ms] Radar Type 0 11ac VHT80, MIMO, MCS 0 Marker 1: - End of Burst : 0.378 s Marker 2: - End of Transmission : 0.388 s End of Burst End of Transmission UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 22 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 6.4 Test result Test result: Pass Date : December 5 to 6, 2016 Test engineer : Kenichi Adachi UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 23 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 SECTION 7: In-Service Monitoring for Non-Occupancy Period 7.1 Operating environment (December 5, 2016) (December 6, 2016) Test place : No.5 Shielded room , No.5 Shielded room Temperature : 23 deg.C , 23 deg.C Humidity : 62 %RH , 42 %RH 7.2 Test Procedure The following two tests are performed: 1). Transfer files from the Master Device to the Client Device on the tested channel during the entire period of the test. The Radar Waveform generator sends a Burst of pulses for one of the Radar Types 0 - 6 at levels defined on the Operating Channel. An additional 1 dB is added to the radar test signal to ensure it is at or above the DFS Detection Threshold, accounting for equipment variations/errors. Observe the transmissions of the EUT after the Channel Move Time on the Operating Channel for duration greater than 30 minutes. 2). Transfer files from the Master Device to the Client Device on the tested channel during the entire period of the test. Observe the transmissions of the EUT on the Operating Channel for duration greater than 30 minutes after the Master Device is shut off. 7.3 Test data 1).Radar Type 0 11ac VHT80, SISO, MCS 0 Marker 1 : End of Burst : 22.08 s Marker 2 : End of Burst + 10 s : 32.08 s Marker 3 : End of transmission : 22.32 s * Measurement non-occupancy period: 31.47 minutes or more (1920 [s] – 32.08 [s] = 1887.92 [s] = 31.47 [minutes]) UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 24 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 1).Radar Type 0 11ac VHT80, MIMO, MCS 0 Marker 1 : End of Burst : 22.80 s Marker 2 : End of Burst + 10 s : 32.80 s Marker 3 : End of transmission : 23.04 s * Measurement non-occupancy period: 31.45 minutes or more (1920 [s] – 32.80 [s] = 1887.20[s] = 31.45 [minutes]) 1).Radar Type 0 11ac VHT80, SISO, MCS 0 Marker 1 : End of Burst : 22.08 s Marker 2 : End of Burst + 10 s : 32.08 s Marker 3 : End of transmission : 22.32 s * Measurement non-occupancy period: 31.47 minutes or more (1920 [s] – 32.08 [s] = 1887.92 [s] = 31.47 [minutes]) UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 25 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 1).Radar Type 0 11ac VHT80, MIMO, MCS 0 Marker 1 : End of Burst : 27.12 s Marker 2 : End of Burst + 10 s : 37.12 s Marker 3 : End of transmission : 27.36 s * Measurement non-occupancy period: 31.38 minutes or more (1920 [s] – 37.12 [s] = 1882.88[s] = 31.38 [minutes]) 2).Master is shut off 11ac VHT80, SISO, MCS 0 Marker 1 : End of Burst : 19.92 s * Measurement non-occupancy period: 31.67 minutes or more (1920 [s]– 19.92 [s] = 1900.08 [s] = 31.67 [minutes]) UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 26 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 2).Master is shut off 11ac VHT80, MIMO, MCS 0 Marker 1 : End of Burst : 33.36 s * Measurement non-occupancy period: 31.44 minutes or more (1920 [s]– 33.36 [s] = 1886.64 [s] = 31.44 [minutes]) 2).Master is shut off 11ac VHT80, SISO, MCS 0 Marker 1 : End of Burst : 20.88 s * Measurement non-occupancy period: 31.67 minutes or more (1920 [s]– 20.88 [s] = 1899.12 [s] = 31.65 [minutes]) UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 27 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 2).Master is shut off 11ac VHT80, MIMO, MCS 0 Marker 1 : End of Burst : 29.52 s * Measurement non-occupancy period: 31.51 minutes or more (1920 [s]– 29.52 [s] = 1890.48 [s] = 31.51 [minutes]) 7.4 Test result Test result: Pass Date : December 5 to 6, 2016 Test engineer : Kenichi Adachi UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401

Test report No. : 11334871S-G-R1 Page : 28 of 29 Issued date : December 22, 2016 FCC ID. : BKEHAC001 APPENDIX 1: Test instruments EMI Test Equipment Control No. Instrument Manufacturer Model No Serial No Test Item Calibration Date * Interval(month) SSG-01 Signal Generator Agilent E4438C MY47271584 DFS 2016/03/24 * 12 SCC-G31 Coaxial Cable Junkosha MWX241- OCT-08-13- DFS 2016/04/18 * 12 01000KMSKMS 046 SPSC-02 Power Mini-Circuits ZFSC-2-10G+ - DFS 2016/04/18 * 12 Splitters/Combiners SPSC-07 Power Mini-Circuits ZFSC-2-10G+ - DFS 2016/07/28 * 12 Splitters/Combiners STM-G3 Terminator Weinschel M1459A U6569 DFS 2016/07/27 * 12 SPSC-08 Power Mini-Circuits ZFSC-2-10G+ - DFS 2016/07/28 * 12 Splitters/Combiners SCC-G11 Coaxial Cable Suhner SUCOFLEX 102 31595/2 DFS 2016/03/23 * 12 SPSC-03 Power Mini-Circuits ZFSC-2-10G+ - DFS 2016/04/18 * 12 Splitters/Combiners SCC-G29 Coaxial Cable Junkosha MWX241- SEP-20-12- DFS - 01000KMSKMS 003 SAT20-06 Attenuator Weinschel Corp. 54A-20 31506 DFS 2016/04/18 * 12 SAT20-07 Attenuator Weinschel Corp. 54A-20 31484 DFS 2016/04/18 * 12 SCC-G26 Coaxial Cable Suhner 141PE - DFS 2016/07/27 * 12 SPD-01 Power Divider Agilent 11636B 56998 DFS 2016/04/18 * 12 SCC-G24 Coaxial Cable Suhner 141PE - DFS 2016/07/27 * 12 SCC-G25 Coaxial Cable Suhner 141PE - DFS 2016/07/27 * 12 SRE-157 Wireless LAN access Cisco Systems AIR-CAP3702E- FTX18227609 DFS point A-K9 SPC-S15 Personal Computer Dell LATITUDE D530 CN-0HP728- DFS - (PP17L) 48643-83R- 0675 SOS-09 Humidity Indicator A&D AD-5681 4061484 DFS 2015/12/07 * 12 COTS-SDFS- Signal Studio Agilent N7620A-101 5010-7739 DFS - 01 Software for DFS COTS-SDFS- Radar Generating Agilent - - DFS - 02 Software for DFS KTS-07 Digital Tester SANWA PC500 7019232 DFS 2016/10/17 * 12 The expiration date of the calibration is the end of the expired month. As for some calibrations performed after the tested dates, those test equipment have been controlled by means of an unbroken chains of calibrations. All equipment is calibrated with valid calibrations. Each measurement data is traceable to the national or international standards. Test Item： DFS: Dynamic Frequency Selection UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401


Document Created: 2017-12-20 01:50:17
Document Modified: 2017-12-20 01:50:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC