05 Short-Term Confidential_User Manual_Part2

FCC ID: AK8XAVAX8000

Users Manual

Download: PDF
FCCID_4388715

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 24 Tuesday, May 14, 2019 8:26 PM Notice on license Specifications This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are FOR THE CUSTOMERS IN THE USA. NOT obligated to announce the contents of the agreement to APPLICABLE IN CANADA, INCLUDING IN THE customers under requirement by the owner of copyright for the software. PROVINCE OF QUEBEC. For details on software licenses, check [Open Source POUR LES CLIENTS AUX ÉTATS-UNIS. NON Licenses] in [General] (page 20). APPLICABLE AU CANADA, Y COMPRIS LA Notice on GNU GPL/LGPL applied software PROVINCE DE QUÉBEC. This product contains software that is subject to the following GNU General Public License (hereinafter referred AUDIO POWER SPECIFICATIONS to as “GPL”) or GNU Lesser General Public License CTA2006 Standard (hereinafter referred to as “LGPL”). These establish that customers have the right to acquire, modify, and Power Output: 20 Watts RMS × 4 at redistribute the source code of said software in accordance 4 Ohms < 1% THD+N with the terms of the GPL or LGPL displayed on this unit. SN Ratio: 80 dBA (reference: 1 Watt into The source code for the above-listed software is available 4 Ohms) on the Web. To download, please access the following URL, then select the model name: Monitor section “XAV-AX8000” for US/Canada, Asia Pacific, Oceania, Middle Display type: Wide LCD color monitor East (excluding Israel) and India models Dimensions: 8.95 in “XAV-AX8050D” for Europe/Israel models URL: http://www.sony.net/Products/Linux/ System: TFT active matrix Please note that Sony cannot answer or respond to any Number of pixels: inquiries regarding the content of the source code. 1,152,000 pixels (800 × 3 (RGB) × 480) If you have any questions or problems concerning your unit Color system: that are not covered in this Operating Instructions, consult PAL/NTSC automatic select for CAMERA IN your nearest Sony dealer. terminal Tuner section (US/Canada models only) Maintenance FM Tuning range: 87.5 MHz – 107.9 MHz Replacing the lithium battery (CR2025) of the Usable sensitivity: 7 dBf remote commander Signal-to-noise ratio: 70 dB (mono) When the battery becomes weak, the range of the Separation at 1 kHz: 45 dB remote commander becomes shorter. AM CAUTION Tuning range: 530 kHz – 1,710 kHz Danger of explosion if battery is incorrectly Sensitivity: 32 μV replaced. Replace only with the same or equivalent type. Tuner section (Asia Pacific, Oceania, Middle Lithium battery (CR2025) East (excluding Israel) and India models only) + side up FM Tuning range: 87.5 MHz – 108.0 MHz (at 50 kHz step) 87.5 MHz – 108.0 MHz (at 100 kHz step) 87.5 MHz – 107.9 MHz (at 200 kHz step) FM tuning step: 50 kHz/100 kHz/200 kHz switchable Note on the lithium battery Keep the lithium battery out of the reach of children. Should Usable sensitivity: 7 dBf the battery be swallowed, immediately consult a doctor. Signal-to-noise ratio: 70 dB (mono) Separation at 1 kHz: 45 dB AM Tuning range: 531 kHz – 1,602 kHz (at 9 kHz step) 530 kHz – 1,710 kHz (at 10 kHz step) AM tuning step: 9 kHz/10 kHz switchable Sensitivity: 32 μV 24GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 25 Tuesday, May 14, 2019 8:26 PM Tuner section (Europe/Israel models only) Mass: Approx. 2.4 kg (5 lb 5 oz) Package contents: DAB/DAB+ Main unit (1) Tuning range: 174.928 MHz – 239.200 MHz Parts for installation and connections (1 set) Antenna (aerial) terminal: Remote commander (1): RM-X170 External antenna (aerial) connector Optional accessories/equipment: FM SiriusXM Connect Vehicle Tuner: SXV100, SXV200, Tuning range: 87.5 MHz – 108.0 MHz SXV300 (US/Canada models only) Usable sensitivity: 7 dBf Ask the dealer for detailed information. Signal-to-noise ratio: 70 dB (mono) Separation at 1 kHz: 45 dB Design and specifications are subject to change without notice. AM Tuning range: 531 kHz – 1,602 kHz Sensitivity: 32 μV Copyrights USB player section Interface: USB port: USB (Hi-speed) Maximum current: 1.5 A SiriusXM Connect Vehicle Tuner and Subscription sold separately. www.siriusxm.com Wireless communication Sirius, XM and all related marks and logos are trademarks of Communication System: Sirius XM Radio Inc. All rights reserved. BLUETOOTH Standard version 3.0 The Bluetooth® word mark and logos are registered Output: trademarks owned by the Bluetooth SIG, Inc. and any use of BLUETOOTH Standard Power Class 2 such marks by Sony Corporation is under license. Other (Max. Conducted +1 dBm) trademarks and trade names are those of their respective owners. Maximum communication range*1: Line of sight approx. 10 m (33 ft) Windows Media is either a registered trademark or Frequency band: trademark of Microsoft Corporation in the United States 2.4 GHz band (2.4000 GHz – 2.4835 GHz) and/or other countries. Modulation method: FHSS This product is protected by certain intellectual property Compatible BLUETOOTH Profiles*2: rights of Microsoft Corporation. Use or distribution of such A2DP (Advanced Audio Distribution Profile) 1.3 technology outside of this product is prohibited without a AVRCP (Audio Video Remote Control Profile) 1.3 license from Microsoft or an authorized Microsoft subsidiary. HFP (Handsfree Profile) 1.6 Apple, iPhone, and Lightning are trademarks of Apple Inc., PBAP (Phone Book Access Profile) 1.1 registered in the U.S. and other countries. Corresponding codec: SBC, AAC Apple CarPlay is a trademark of Apple Inc. *1 The actual range will vary depending on factors such as IOS is a trademark or registered trademark of Cisco in the obstacles between devices, magnetic fields around a U.S. and other countries and is used under license. microwave oven, static electricity, reception sensitivity, antenna (aerial)’s performance, operating system, Android, Android Auto, Google and Google Play are software application, etc. trademarks of Google LLC. *2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. WebLink™ is a trademark of Abalta Technologies, Inc. Power amplifier section THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL Outputs: Speaker outputs PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON- COMMERCIAL USE OF A CONSUMER FOR DECODING VIDEO Speaker impedance: 4 Ω – 8 Ω IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD Maximum power output: 55 W × 4 (at 4 Ω) (“MPEG-4 VIDEO”) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY General AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. Power requirements: 12 V DC car battery NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY (negative ground (earth)) OTHER USE. Rated current consumption: 10 A ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND Dimensions (maximum): LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE Approx. 229 mm × 136 mm × 253 mm HTTP://WWW.MPEGLA.COM (9 1/8 in × 5 3/8 in × 10 in) (w/h/d) Mounting dimensions: Approx. 182 mm × 53 mm × 160 mm (7 1/4 × 2 1/8 in × 6 3/8 in) (w/h/d) 25GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 26 Tuesday, May 14, 2019 8:26 PM THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON- COMMERCIAL USE OF A CONSUMER TO Troubleshooting (i)ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD The following checklist will help you remedy (“AVC VIDEO”) AND/OR problems you may encounter with your unit. (ii)DECODE AVC VIDEO THAT WAS ENCODED BY A Before going through the checklist below, check CONSUMER ENGAGED IN A PERSONAL AND the connection and operating procedures. NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM For details on using the fuse and removing the unit A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER from the dashboard, see “Connection/Installation” USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM (page 32). MPEG LA, L.L.C. SEE If the problem is not solved, visit the support site on HTTP://WWW.MPEGLA.COM the back cover. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE AND VC-1 PATENT PORTFOLIO LICENSE General FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO DECODE VIDEO IN COMPLIANCE WITH THE There is no beep sound. AVC STANDARD (“AVC VIDEO”) AND/OR THE VC-1 STANDARD  An optional power amplifier is connected and (“VC-1 VIDEO”) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY you are not using the built-in amplifier. AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO AND/OR VC-1 VIDEO. NO The fuse has blown. LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER The unit makes noise when the position of the USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM ignition is switched. MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM  The power supply leads are not matched All other trademarks are trademarks of their respective correctly with the car’s accessory power owners. connector. The display disappears from/does not appear on the monitor.  The monitor off function is activated (page 7, 9). – Touch anywhere on the display to turn the display back on. Menu items cannot be selected.  Unavailable menu items are displayed in gray. The USB functions do not work properly.  Do not use a USB extension cable as it may cause deterioration of signal quality. – Use a shorter USB cable when connecting the USB device, or replace the USB cable with a new one. The unit cannot be operated.  Press and hold HOME for more than 10 seconds to restart the unit. For your safety, do not restart the unit while you are driving. The clock set automatically is not accurate.  The clock data on radio waves is not accurate. – Press HOME, select [Settings]  [General]  [Set Date/Time], then set from [Auto(RDS)] to [Manual]. After that, touch and adjust the clock manually. Display The display does not turn on.  The display may not be mounted properly. – Check that the installation and connection of the display are appropriately applied to the unit. 26GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 27 Tuesday, May 14, 2019 8:26 PM Touch panel Picture The touch panel does not react to your touch There is no picture/picture noise occurs. correctly.  A connection has not been made correctly.  Touch one part of the touch panel at a time. If  Check the connection between this unit and two or more parts are touched simultaneously, other equipment and set the input selector of the the touch panel will not react correctly. equipment to the source corresponding to this  Calibrate the touch panel of the display (page 21). unit.  Touch the pressure sensitive panel firmly.  Installation is not correct. – Install the unit at an angle of less than 30° in a Multi-touch is not recognized. sturdy part of the car.  Multi-touch operation is not supported on this  The parking lead (light green) is not connected to unit. the parking brake switch lead, or the parking brake is not applied. Radio The picture does not fit in the screen. The radio reception is poor.  The aspect ratio is fixed on the playback source. Static noise occurs.  Connect the antenna (aerial) firmly. Sound The stations cannot be received. (Asia Pacific, There is no sound/sound skips/sound cracks. Oceania, Middle East (excluding Israel) and India  A connection has not been made correctly. models only)  Check the connection between this unit and the  The tuning step setting has been erased. connected equipment and set the input selector – Set the tuning step again (page 20). of the equipment to the source corresponding to this unit.  Installation is not correct. RDS – Install the unit at an angle of less than 30° in a PTY displays [PTY not found.]. sturdy part of the car.  The current station is not an RDS station, or the  The unit is in pause/reverse/fast-forward mode. radio reception is poor.  The settings for the outputs are not made correctly. Seek starts after a few seconds of listening.  The volume is too low. (Europe/Israel models only)  The ATT function is activated.  The station is non-TP or has a weak signal.  The format is not supported. – Deactivate TA (page 00). – Check if the format is supported by this unit (page 23). There are no traffic announcements. (Europe/ Israel models only) Sound is noisy.  Activate TA (page 00).  Keep cords and cables away from each other.  The station does not broadcast any traffic announcements despite being TP. USB playback – Tune into another station. Items cannot be played.  Reconnect the USB device. DAB/DAB+ radio (Europe/Israel models only) The USB device takes longer to play.  The USB device contains large-sized files or files Stations cannot be received. with a complicated tree structure.  See [No Station] (page 00) for details when the DAB signal cannot be received. Audio files cannot be played.  USB devices formatted with file systems other No traffic announcements. than FAT12, FAT16, FAT32 or exFAT are  Disable DAB announcements (page 00). unsupported.* – Traffic announcements are not available while * This unit supports FAT12, FAT16, FAT32 and exFAT, but DAB announcements are enabled. some USB device may not support all of these. For details, refer to the operating instructions of each USB device or contact the manufacturer. 27GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 28 Tuesday, May 14, 2019 8:26 PM BLUETOOTH The sound skips during audio streaming or the BLUETOOTH connection fails. The other BLUETOOTH device cannot detect this  Reduce the distance between the unit and the unit. BLUETOOTH device.  Set [Bluetooth Connection] to [ON] (page 21).  If the BLUETOOTH device is stored in a case which  While connecting to a BLUETOOTH device, this interrupts the signal, remove the case while unit cannot be detected by another device. using the device. Terminate the current connection and search for  Several BLUETOOTH devices or other devices (e.g. this unit from the other device. ham radio devices) which emit radio waves are  Depending on your smartphone or mobile used nearby. phone, you may need to delete this unit from the – Turn off the other devices. history of the connected smartphone or mobile – Increase the distance between the unit and phone, then pair them again (page 9). other devices.  Playback sound stops momentarily when this Connection is not possible. unit is connecting to a mobile phone. This is not a  Check the pairing and connection procedures in malfunction. the manual of the other device, etc., and perform the operation again. The connected BLUETOOTH device cannot be controlled during audio streaming. The name of the detected device does not  Check that the connected BLUETOOTH device appear. supports AVRCP.  Depending on the status of the other device, it may not be possible to obtain the name. Some functions do not work.  Check that the connecting device supports the There is no ringtone. functions in question.  Raise the volume while receiving a call. A call is answered unintentionally. The talker’s voice volume is low.  The connecting phone is set to start a call  Raise the volume during a call. automatically.  [Auto Answer] of this unit is set to [ON] (page 17). The other party says that the volume is too low or high. Pairing failed due to time out.  Adjust the [MIC Gain] level (page 17).  Depending on the connecting device, the time limit for pairing may be short. Try completing the Echo or noise occurs during call conversations. pairing within the time.  Reduce the volume.  Set [Speech Quality] to [Mode 1] or [Mode 2]. Cannot pair. (page 17).  The unit may not be able to pair with a previously  If ambient noise other than the phone call sound paired BLUETOOTH device after initializing the is loud, try reducing this noise. unit if the pairing information of the unit is on the – Shut the window if road noise is loud. BLUETOOTH device. In this case, delete the – Lower the air conditioner if the air conditioner is pairing information of the unit from the loud. BLUETOOTH device, and then pair them again. The phone sound quality is poor. The BLUETOOTH function cannot be operated.  Phone sound quality depends on reception  Turn the ignition off. Wait for a while, then turn conditions of the mobile phone. the ignition to the ACC position. – Move your car to a place where you can enhance the mobile phone’s signal if the No sound is output from the car speakers during reception is poor. a handsfree call.  If the sound is output from the mobile phone, set The volume of the connected BLUETOOTH device the mobile phone to output the sound from the is low or high. car speakers.  Volume level will differ depending on the BLUETOOTH device. – Reduce the volume level differences between this unit and the BLUETOOTH device (page 15). 28GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 29 Tuesday, May 14, 2019 8:26 PM SiriusXM Connect Vehicle Tuner (US/ WebLink™ (India models only) Canada models only) WebLink™ cannot be used.  Installing the “WebLink Host” app to your A mature channel is not blocked although iPhone/Android phone is required. parental control setting has been made. – Check your iPhone/Android phone and accept  If you tune to a mature channel, the passcode the disclaimers and permission to use display will appear. Once you have entered the WebLink™ on your iPhone/Android phone. passcode, you will have unblocked parental  Disconnect your iPhone/Android phone from the control for all channels until the unit is powered USB port and reconnect it again. down or you turn parental control back on.  WebLink™ may not be available in your country – Set [Parental Control] to [Locked] in the SXM or region. option ( ) again (page 13). Apple CarPlay Messages The Apple CarPlay icon does not appear on the HOME screen.  Your iPhone is not compatible with Apple General CarPlay. Cannot play this content. – Refer to the compatibility list on the support  The currently selected content cannot be played site on the back cover. back, or skipped to the next one.  Disconnect your iPhone from the USB port and – The content is not in a supported file format. reconnect it again. Check supported file formats (page 23).  Apple CarPlay may not be available in your country or region. Device no response  Make sure a certified Lightning cable is used to  The unit does not recognize the connected USB connect your iPhone and the unit. device. – Reconnect the USB device. Android Auto – Check that the USB device is supported by the unit. The Android Auto icon does not appear on the HOME screen. No Playable Data  Check your Android phone and accept the  The USB device has no playable data. disclaimers and permission requests required to – Load music data/files into the USB device. use Android Auto on your Android phone.  There is no Android Auto application installed on Overcurrent caution on USB. your Android phone.  The USB device is overloaded. – Download and install the Android Auto – Disconnect the USB device. application onto your Android phone. – The USB device has a fault, or an unsupported  Your Android phone is not compatible with device is connected. Android Auto. – Android phone with Android 5.0 or higher is USB device not supported required. Refer to the compatibility list on the  For details on the compatibility of your USB support site on the back cover. device, visit the support site on the back cover.  Disconnect your Android phone from the USB port and reconnect it again. USB hub not supported  Android Auto may not be available in your  USB hubs are not supported on this unit. country or region. 29GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 30 Tuesday, May 14, 2019 8:26 PM – Inspect the antenna (aerial) cable for damage BLUETOOTH and kinks. Bluetooth device is not found. – Replace the antenna (aerial) if the cable is  The unit cannot detect a connectable damaged. SiriusXM products are available at BLUETOOTH device. your local car audio retailer or online at – Check the BLUETOOTH setting of the www.shop.siriusxm.com connecting device.  No device is in the list of registered BLUETOOTH Check Tuner devices.  The radio is having difficulty communicating with – Perform pairing with a BLUETOOTH device the SiriusXM Connect Vehicle Tuner. (page 9).  The tuner may be disconnected or damaged. – Verify that the SiriusXM Connect Vehicle Tuner Handsfree device is not available. cable is securely connected to the radio.  A mobile phone is not connected. – Connect a mobile phone (page 10). Incorrect Pass Code entered  Passcode input failed. – Check that the passcode has been entered SiriusXM Connect Vehicle Tuner (US/ correctly. – If you forget your passcode, perform Canada models only) [SXM Reset] in [General] (page 20). Channel Locked Note that performing [SXM Reset] will initialize Please Enter the Lock Code all the SiriusXM settings and stored contents in  The channel that you have requested is Locked the SiriusXM Connect Vehicle Tuner. by the radio Parental Control feature. See “To set a parental control” (page 13) for more information No Signal on the Parental Control feature and how to access  SiriusXM Connect Vehicle Tuner is having locked channels. difficulty receiving the SiriusXM satellite signal. – Verify that your vehicle is outdoors with a clear Channel Not Available view of the sky.  The channel that you have requested is not a – Verify that the SiriusXM magnetic mount valid SiriusXM channel or the channel that you antenna (aerial) is mounted on a metal surface were listening to is no longer available. on the outside of the vehicle.  You may also see this message briefly when first – Move the SiriusXM antenna (aerial) away from connecting a new SiriusXM Connect Vehicle any obstructions. Tuner. – Inspect the antenna (aerial) cable for damage Visit www.siriusxm.com in the USA or and kinks. www.siriusxm.ca in Canada for SiriusXM channel – Consult the SiriusXM Connect Vehicle Tuner lineup information. installation manual for more information on antenna (aerial) installation. Channel Not Subscribed – Replace the antenna (aerial) if the cable is Call SiriusXM to Subscribe damaged. SiriusXM products are available at  The channel that you have requested is not your local car audio retailer or online at included in your SiriusXM subscription package www.shop.siriusxm.com or the channel that you were listening to is no longer included in your SiriusXM subscription Subscription Updated package. Press Enter to Continue If you have questions about your subscription  The radio has detected a change in your SiriusXM package or would like to subscribe to this subscription status. channel, please contact SiriusXM. – Press Enter to clear the message. In the USA, visit www.siriusxm.com or call If you have questions about your subscription, 1-866-635-2349. please contact SiriusXM. In Canada, visit www.siriusxm.ca or call In the USA, visit www.siriusxm.com or call 1-877-438-9677. 1-866-635-2349. In Canada, visit www.siriusxm.ca or call Check Antenna 1-877-438-9677.  The radio has detected a fault with the SiriusXM antenna (aerial).  The antenna (aerial) cable may be either disconnected or damaged. – Verify that the antenna (aerial) cable is connected to the SiriusXM Connect Vehicle Tuner. 30GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 31 Tuesday, May 14, 2019 8:26 PM WebLink™ (India models only) USB device not supported  To use WebLink™, installing the “WebLink Host” app to your iPhone/Android phone is required (page 18). DAB/DAB+ radio (Europe/Israel models only) No Station  The DAB signal cannot be received. – Perform an auto tune (page 00). – Check the connection of the DAB antenna (aerial) (not supplied). – Check that [Antenna Power] is set to [ON] (page 00). Receiving  The unit is waiting to receive a DAB station. If these solutions do not help improve the situation, consult your nearest Sony dealer. 31GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 32 Tuesday, May 14, 2019 8:26 PM Note on installing in cars with electric parking brake system For cars with electric parking brakes, some related functions Connection/Installation (such as video blocking function) may not work properly. Mounting angle adjustment Cautions Adjust the mounting angle to less than 30°. • Do not install this unit in a car that has no ACC position. The display of the unit does not turn off even after turning the ignition off, and this causes Ensuring the mounting location of the battery drain. unit • Run all ground (earth) leads to a common ground (earth) point. • Make sure that the distance from the front surface • Do not get the leads trapped under a screw or (reference surface) of the mounted unit to the caught in moving parts (e.g., seat railing). surface of your car's center cluster is within 22 mm • Before making connections, turn the car ignition (7/8 in). If it exceeded, the unit cannot be installed off to avoid short circuits. properly. • Connect the yellow and red power supply leads Front surface of the unit only after all other leads have been connected. (reference surface) For Europe/Israel models only: Connect the power supply leads  to the unit and ɸ speakers before connecting it to the auxiliary Center cluster panel of your power connector. ɹ car • Be sure to insulate any loose unconnected leads with electrical tape for safety. • Choose the installation location carefully so that Screw hole positions the unit will not interfere with normal driving (for securing the display and the unit) operations.  22 mm (7/8 in)  51 mm to 71 mm (2 1/8 in to 2 7/8 in) • Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such • For your safety, adjust the mounting location of as in direct sunlight or near heater ducts. the unit so that it does not interfere with driving • Use only the supplied mounting hardware for a operations such as button (switch) or shift lever safe and secure installation. operations. • This unit may not be installed properly depending Hidden area even when the display is on the car type. For details on the mounting slid up or down space, see “Ensuring the mounting location of the unit” (page 00). • To avoid injury, be careful not to drop the display ɺ during installation. • When installing, be careful not to cut off your fingers with the metal parts of the brackets and ɻ ɻ mounting base. • Do not pinch your fingers when attaching the display to the unit. ɼ • Do not install the unit in a position where the unit interferes with driving operations (such as in Position of the unit (reference position) positions where the shift lever hits the unit, or the hazard button cannot be pressed).  60 mm (2 3/8 in)  76 mm (3 in)  60 mm (2 3/8 in) • When using the unit for a long period of time, there may be a possibility that the screws securing the display may come loose. Periodically tighten these screws. • Do not make any changes or modifications to the unit other than those described in this manual. Note on the power supply lead (yellow) When connecting this unit in combination with other stereo components, the amperage rating of the car circuit to which the unit is connected must be higher than the sum of each component’s fuse amperage rating. Note on installing in cars with a start-stop system The unit may restart when starting the engine from start- stop. In this case, turn off the start-stop system of your car. 32GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 33 Tuesday, May 14, 2019 8:26 PM  Joint cover (1)  Fixing screw Parts List for Installation (3 × 8 mm (1/8 × 11/32 in)) (1)  Power supply leads (1)  Power supply leads (1) (except for Europe/Israel (Europe/Israel models only) models) • This parts list does not include all the package contents.  Mounting screws  Microphone (1) • The mounting sleeve  is attached to the unit (5 × max. 8 mm before shipping. Before mounting the unit, use (7/32 × max. 5/16 in)) (4) the release keys  to remove the mounting sleeve  from the unit. For details, see “Removing the mounting sleeve (Europe/Israel models only)” (page 00). (Europe/Israel models only) • Keep the release keys  for future use as they are also necessary if you remove the unit from your car. (Europe/Israel models only)  Flat-mount base (1)  Double-sided tape (1)  USB extension cable (long) (1)  USB extension cable (short) (1)  Cable tie (1)  Connection cable RC-SR1 (1) (US/Canada and India models only)  Mounting sleeve (1)  Release keys (2) (Europe/Israel models only) (Europe/Israel models only)  Trim ring (1)  Rear panel covers (L, R) (2) (Europe/Israel models only) 33GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 34 Tuesday, May 14, 2019 8:26 PM Connection (US/Canada models only) Subwoofer*1 *3 *3 *3 Power amplifier*1 *3 Rear view camera*1 *6*7 from a wired remote control (not supplied)*4*10   Smartphone, USB device (for audio/video playback)*1 *9 FUSE 10A Satellite radio tuner (SiriusXM)*1*8  White White/black striped Front speaker*1*2 Gray Gray/black striped Green Green/black striped Rear speaker*1*2 Purple Purple/black striped Black Yellow Red For details, see “Making Blue/white striped connections” (page 37). Orange/white striped Light green Purple/white striped from a car antenna (aerial)*5 34GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 35 Tuesday, May 14, 2019 8:26 PM Connection (Asia Pacific, Oceania, Middle East (excluding Israel) and India models only) Subwoofer*1 *3 *3 *3 Power amplifier*1 *3 Rear view camera*1 *6*7 from a wired remote control (not supplied)*4*10   Smartphone, USB device (for audio/video playback)*1 *9 FUSE 10A  White White/black striped Front speaker*1*2 Gray Gray/black striped Green Green/black striped Rear speaker*1*2 Purple Purple/black striped Black Yellow Red For details, see “Making Blue/white striped connections” (page 37). Orange/white striped Light green Purple/white striped from a car antenna (aerial)*5 35GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 36 Tuesday, May 14, 2019 8:26 PM Connection (Europe/Israel models only) Subwoofer*1 *3 *3 *3 Power amplifier*1 *3 Rear view camera*1 *6*7 from a wired remote control (not supplied)*4*10   Smartphone, USB device (for audio/video playback)*1 *9 FUSE 10A  *2 For details, see “Making connections” (page 37). See “Power connection diagram (Europe/Israel models only)” (page 38) for details. Light green Purple/white striped from a car antenna (aerial)*5 from DAB antenna (aerial) (not supplied)*11 36GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 37 Tuesday, May 14, 2019 8:26 PM *1 Not supplied  To the parking brake switch lead *2 Speaker impedance: 4 Ω to 8 Ω × 4 The mounting position of the parking brake *3 RCA pin cord (not supplied) *4 Depending on the type of car, use an adaptor for a wired switch lead depends on your car. remote control (not supplied). Be sure to connect the parking brake lead (light For details on using the wired remote control, see “Using green) of the power supply leads  to the the wired remote control” (page 39). parking brake switch lead. *5 Depending on the type of car, use an adaptor (not supplied) if the antenna (aerial) connector does not fit. Parking brake switch lead *6 Whether in use or not, route the microphone input cord so it does not interfere with driving operations. Secure the cord with a clamp, etc., if it is installed around your feet. *7 For details on installing the microphone, see “Installing the microphone” (page 39). *8 For more information on how to install the SiriusXM Connect Vehicle Tuner, consult the installation guide included with the tuner (US/Canada models only). Hand brake type Foot brake type *9   To the +12 V power terminal of the car’s rear lamp lead (only when connecting the rear view camera) For Europe/Israel models only: *10 When using the steering wheel remote control, use the If you have a power antenna (aerial) without a relay connection cable RC-SR1  as necessary (US/Canada and India models only). box, connecting this unit with the supplied power *11 Set [Antenna Power] to [ON] (default) or [OFF] depending supply leads  may damage the antenna (aerial). on the type of DAB antenna (aerial) (not supplied) (page 00). Max. supply current 0.1 A (Europe/Israel  To the car’s speaker connector models only) Making connections  To a common ground (earth) point First connect the black ground (earth) lead then connect the yellow and red power supply leads. 1  Purple Rear speaker  To the +12 V power terminal which is 2 (right)  Purple/black energized at all times striped Be sure to first connect the black ground (earth) 3 Front speaker  Gray lead to a common ground (earth) point. 4 (right)  Gray/black striped  To the +12 V power terminal which is 5  White energized when the ignition switch is set to Front speaker White/black the accessory position 6 (left)  striped Be sure to first connect the black ground (earth) 7  Green lead to a common ground (earth) point. Rear speaker Green/black  To the power antenna (aerial) control lead or 8 (left)  striped the power supply lead of the antenna (aerial) booster It is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated telescopic antenna (aerial). To AMP REMOTE IN of an optional power amplifier This connection is only for amplifiers and a power antenna (aerial). Connecting any other system may damage the unit. Note It will take about 10 seconds to shut down the output of REM OUT after the unit is turned off.  To a car’s illumination signal Be sure to first connect the black ground (earth) lead to a common ground (earth) point. 37GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 38 Tuesday, May 14, 2019 8:26 PM  To the car’s power connector Power connection diagram (Europe/ Israel models only) Check your car’s auxiliary power connector, and match the connections of leads correctly depending on the car. Auxiliary power connector continuous power 12 Yellow supply power antenna (aerial) / 13 power amplifier control Blue/white striped (REM OUT) switched illumination Orange/white 14 power supply striped 15 switched power supply Red Common connection 16 ground (earth) Black Red Red  To the parking brake switch lead The mounting position of the parking brake switch lead depends on your car. Be sure to connect the parking brake lead (light green) of the power supply leads  to the Yellow Yellow parking brake switch lead. Parking brake switch lead continuous power 12 Yellow supply 15 switched power supply Red When the positions of the red and yellow leads are inverted Red Red Hand brake type Foot brake type  To the +12 V power terminal of the car’s rear lamp lead (only when connecting the rear view camera) Yellow Yellow Memory hold connection 12 switched power supply Yellow When the yellow power supply lead is connected, continuous power 15 Red power will always be supplied to the memory supply circuit even when the ignition switch is turned off. When the car without ACC position Speaker connection Red Red • Before connecting the speakers, turn the unit off. • Use speakers with an impedance of 4 Ω to 8 Ω, and with adequate power handling capacities to avoid damage. Yellow Yellow After matching the connections and switching power supply leads correctly, connect the unit to the car’s power supply. If you have any questions and problems connecting your unit that are not covered in this manual, consult the car dealer. 38GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 39 Tuesday, May 14, 2019 8:26 PM When using the wired remote control Installing the microphone 1 To enable the wired remote control, set [Steering To capture your voice during handsfree calling, you Control] in [General] to [Preset] (page 20). need to install the microphone . Using the rear view camera Installation of the rear view camera (not supplied) is required before use. The picture from a rear view camera connected to  the CAMERA IN terminal is displayed when: – the back lamp of your car lights up (or the shift lever is set to the R (reverse) position). – you press HOME, then touch [Rear Camera]. Clip (not supplied)  Installation To install the unit and the display securely, be sure to follow the steps  to  in order.   Removing the trim ring and the mounting sleeve (page 00)  Before mounting the unit (page 00)   Mounting the unit in the dashboard (page 00)  Attaching the joint cover (page 00)  Setting up the display (page 00)  Making sure the mounting positions of the Cautions display (page 00) • It is extremely dangerous if the cord becomes  Organizing the USB cable (page 00) wound around the steering column or gearstick.  Mounting the display to the unit (page 00) Be sure to keep it and other parts from interfering with your driving operations. For your safety • If airbags or any other shock-absorbing After mounting the display to the unit, make sure equipment are in your car, contact the store where that the display does not interfere with normal you purchased this unit or the car dealer before driving operations such as blocking the driver's installation. view or getting the cables tangled. Notes • When mounting on the dashboard, remove the visor clip carefully from the microphone , then attach the flat-  Removing the trim ring and the mount base  to the microphone . mounting sleeve (Europe/Israel models • Before attaching the double-sided tape , clean the surface of the dashboard with a dry cloth. only) Before installing the unit, remove the trim ring  Using the wired remote control and the mounting sleeve  from the unit. When using the steering wheel remote 1 Pinch both edges of the trim ring , then control pull it out. Installation of the connection cable RC-SR1  is required before use.  1 To enable the steering wheel remote control, select [General]  [Steering Control]  [Custom]  to make the registration (page 20). When the registration is complete, the steering wheel remote control becomes available. Notes on installing the connection cable RC-SR1  • Refer to the support site on the back cover for details then connect each lead properly to the appropriate leads. Making an improper connection may damage the unit. • Consulting the dealer or an experienced technician for help is recommended. 39GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 40 Tuesday, May 14, 2019 8:26 PM 2 Insert both release keys  until they click, 2 Route the USB extension cable (long)  and pull down the mounting sleeve , then inside the dashboard, then connect the USB pull up the unit to separate. cable (short)  from the unit. Position the USB cable so that its connector  (male) comes out from the center console panel.     * Face the hook inwards. *  Before mounting the unit Before mounting the unit in the dashboard, arrange * USB connector (male) the USB extension cables. USB cable connection diagram:  Mounting the unit in the dashboard Smartphone, USB device (not supplied) Using the mounting brackets supplied with your car   You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. 1 Store the USB extension cable (short)  to Example the groove of the unit, then attach the cable cover.  to dashboard/center console Position the USB cable so that its connector (male) comes to the front side of the unit. Cable cover ɟ Bracket ɟ ɞ Bracket ɞ *  Existing parts supplied Release the lock of the  cable cover when with your car removing it. * USB connector (male) Note To prevent malfunction, install only with the mounting screws . 40GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 41 Tuesday, May 14, 2019 8:26 PM Using the mounting sleeve (Europe/  Setting up the display Israel models only) The mounting positions of the display can be Before installing, make sure the catches on both adjusted. sides of the mounting sleeve  are bent inwards 2 mm (3/32 in). 1 Position the mounting sleeve  inside the dashboard, then bend the claws outward for a tight fit. 182 mm (7 1/4 in) 53 mm (2 1/8 in) Depth Height Angle (within 20 mm (within 60 mm (-10° to +10°, in 3 (13/16 in), in 3 steps) (2 3/8 in), in 7 steps) steps) Adjusting the depth of the display position  Catch 1 Loosen the 3 pre-installed screws for depth adjustment (on top and both sides). 2 Mount the unit onto the mounting sleeve  then attach the trim ring .  Pre-installed screws 2 Slide the connector bracket to decide the  appropriate depth position. Adjustable depth: within 20 mm (13/16 in) (), in 3 steps, in 10 mm (13/32 in) pitch (). ɸ Notes • If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. • Make sure the 4 catches on the trim ring  are properly engaged in the slots of the unit. ɹ ɹ  Attaching the joint cover 3 At the desired position, tighten the 3 screws 1 Attach the joint cover  to the mounting firmly to secure the connector bracket. base of the unit, then slide it into the unit temporarily.   When you tighten a screw, be careful not to apply too much torque as doing so may damage the screw (the torque value should be less than 1 N•m). 41GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Left 010COV.book Page 42 Tuesday, May 14, 2019 8:26 PM Adjusting the height of the display Adjusting the display angle (tilt) position 1 Remove the 2 pre-installed screws for angle 1 Remove the 4 pre-installed screws for adjustment (on both sides). height adjustment (on both sides). Pre-installed screws Pre-installed screws 2 Adjust the display angle to decide the appropriate angle. 2 Slide the connector bracket up or down to Adjustable angle: -10° to +10°, in 3 steps decide the appropriate height position. Adjustable height: within 60 mm (2 3/8 in) (), in 7 steps, in 10 mm (13/32 in) pitch (). ɹ ɹ ɹ ɹ ɸ Screw holes to use: 0° (1 – A) -10° (3 – B) +10° (2 – B) 3 At the desired position, tighten the 4 screws firmly to secure the connector bracket. When you tighten a screw, be careful not to apply too much torque as doing so may damage 3 At the desired angle, tighten the 2 screws the screw (the torque value should be less than through the screw holes (upper or lower) 1 N•m). that match the display angle. When you tighten a screw, be careful not to apply too much torque as doing so may damage the screw (the torque value should be less than 1 N•m). 42GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\040CD.fm masterpage: Right 010COV.book Page 43 Tuesday, May 14, 2019 8:26 PM 2 Tighten 4 screw (on top) to secure the  Making sure the mounting positions connector bracket to the unit. of the display 1 Attach the display to the unit temporarily. When you tighten a screw, be careful not to apply too much torque as doing so may damage the screw (the torque value should be less than 1 N•m). 2 Confirm that the display does not block the 3 Slide the joint cover  out to protect the driver’s view or interfere with normal mounting base of the display, then tighten driving operations. the fixing screw  to secure the cover. If further adjustment of the mounting position (depth, height, angle) is necessary, remove the display from the unit, then adjust it again accordingly.     Organizing the USB cable 1 Connect the USB extension cable (short)  When you tighten a screw, be careful not to to the USB port of the display, then route apply too much torque as doing so may damage the cable along the groove. the screw (the torque value should be less than 1 N•m). 4 Attach the rear panel covers (L, R)  along the guides for protection.  Release the USB cable from the slit of panel.   To prevent the extension cable from coming off, be sure to route the USB cable along the groove through the catches inside.  Attaching the display to the unit 1 Attach the display to the unit. Fuse replacement When replacing the fuse, be sure to Fuse (10 A) use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an Make sure that the connector brackets of the internal malfunction. In such a case, consult your display is fully inserted to the unit. nearest Sony dealer. 43GB XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\050CE.fm masterpage: Blank.L 010COV.book Page 44 Tuesday, May 14, 2019 8:26 PM Suomi Sony Corporation vakuuttaa, että tämä laite on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen Български teksti on saatavilla seuraavassa internetosoitteessa: С настоящото, Sony Corporation декларира, че това http://www.compliance.sony.de/ оборудване е в съответствие с Директива 2014/53/ EU. Français Цялостният текст на ЕС декларацията за Le soussigné, Sony Corporation, déclare que cet съответствие може да се намери на следния équipement est conforme à la Directive 2014/53/UE. интернет адрес: Le texte complet de la déclaration UE de conformité est http://www.compliance.sony.de/ disponible à l’adresse internet suivante : http://www.compliance.sony.de/ Hrvatski Sony Corporation ovime izjavljuje da je ova oprema u Deutsch skladu s Direktivom 2014/53/EU. Hiermit erklärt Sony Corporation, dass diese Cjeloviti tekst EU izjave o sukladnosti dostupan je na Funkanlage der Richtlinie 2014/53/EU entspricht. sljedećoj internetskoj adresi: Der vollständige Text der EU-Konformitätserklärung ist unter http://www.compliance.sony.de/ der folgenden Internetadresse verfügbar: http://www.compliance.sony.de/ Česky Sony Corporation tímto prohlašuje, že toto zařízení je v Ελληνικά souladu se směrnicí 2014/53/EU. Με την παρούσα Sony Corporation δηλώνει ότι, αυτή η Úplné znění EU prohlášení o shodě je k dispozici na této συσκευή πληροί τους όρους της οδηγίας 2014/53/EU. internetové adrese: Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ http://www.compliance.sony.de/ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: http://www.compliance.sony.de/ Dansk Herved erklærer Sony Corporation, at dette udstyr er i Magyar overensstemmelse med direktiv 2014/53/EU. A Sony Corporation igazolja, hogy ez a készülék Den fulde ordlyd af EU-overensstemmelseserklæringen megfelel a 2014/53/EU irányelvnek. er tilgængelig på følgende internetadresse: Az EU-megfelelőségi nyilatkozat teljes szövege elérhető http://www.compliance.sony.de/ a következő internetes címen: http://www.compliance.sony.de/ Nederlands Hierbij verklaart Sony Corporation dat deze Italiano radioapparatuur conform is met Richtlijn 2014/53/EU. Con la presente, Sony Corporation dichiara che questo De volledige tekst van de EU-conformiteitsverklaring apparecchio è conforme alla Direttiva 2014/53/UE. kan worden geraadpleegd op het volgende Il testo completo della dichiarazione di conformità UE è internetadres: disponibile al seguente indirizzo Internet: http://www.compliance.sony.de/ http://www.compliance.sony.de/ English Latviešu Hereby, Sony Corporation declares that this equipment Ar šo Sony Corporation deklarē, ka šī iekārta atbilst is in compliance with Directive 2014/53/EU. direktīvai 2014/53/ES. The full text of the EU declaration of conformity is Pilns ES atbilstības deklarācijas teksts ir pieejams šādā available at the following internet address: interneta vietnē: http://www.compliance.sony.de/ http://www.compliance.sony.de/ Eesti keel Lietuvių kalba Käesolevaga deklareerib Sony Corporation, et käesolev Mes, Sony Corporation, patvirtiname, kad šis įrenginys seade vastab direktiivi 2014/53/EL nõuetele. atitinka direktyvą 2014/53/ES. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav Visas ES atitikties deklaracijos tekstas pasiekiamas šiuo järgmisel internetiaadressil: internetiniu adresu: http://www.compliance.sony.de/ http://www.compliance.sony.de/ XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\01GB-XAV-AX8000UC\050CE.fm masterpage: Blank.R 010COV.book Page 45 Tuesday, May 14, 2019 8:26 PM Norsk Türkçe Herved erklærer Sony Corporation at utstyrstypen er i Sony Corporation bu ekipmanın 2014/53/AB Direktifine samsvar med direktiv 2014/53/EU. uygun olduğunu işbu belge ile beyan eder. EU-erklæring fulltekst finner du på Internett under: AB uygunluk beyanının tam metni aşağıdaki internet http://www.compliance.sony.de/ adresinden edinilebilir: http://www.compliance.sony.de/ Polski Sony Corporation niniejszym oświadcza, że to Shqip urządzenie jest zgodne z dyrektywą 2014/53/UE. Me anë të këtij dokumenti, Sony Corporation deklaron Pełny tekst deklaracji zgodności UE jest dostępny pod se kjo pajisje është në pajtueshmëri me Direktivën następującym adresem internetowym: 2014/53/BE. http://www.compliance.sony.de/ Teksti i plotë i deklaratës së pajtueshmërisë së BE-së disponohet në adresën e mëposhtme të të internetit: Português http://www.compliance.sony.de/ O(a) abaixo assinado(a) Sony Corporation declara que o presente equipamento está em conformidade com a Македонски Diretiva 2014/53/UE. Со овој документ, Sony Corporation изјавува дека O texto integral da declaração de conformidade está оваа опрема е во согласност со Директивата 2014/ disponível no seguinte endereço de Internet: 53/ЕУ. http://www.compliance.sony.de/ Целосниот текст на Изјавата за сообразност на ЕУ е достапен на следнава адреса на интернет: Română http://www.compliance.sony.de/ Prin prezenta, Sony Corporation declară că acest echipament este în conformitate cu Directiva 2014/53/ Srpski UE. Sony Corporation ovim izjavljuje da je ova oprema u Textul integral al declarației UE de conformitate este skladu sa direktivom 2014/53/EU. disponibil la următoarea adresă internet: Kompletan tekst EU izjave o usklađenosti je dostupan http://www.compliance.sony.de/ na sledećoj internet adresi: http://www.compliance.sony.de/ Slovenščina Sony Corporation potrjuje, da je ta oprema skladna z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: http://www.compliance.sony.de/ Slovensky Sony Corporation týmto vyhlasuje, že zariadenie je v súlade so smernicou 2014/53/EÚ. Úplné vyhlásenie EÚ o zhode je k dispozícii na tejto internetovej adrese: http://www.compliance.sony.de/ Español Por la presente, Sony Corporation declara que este equipo es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: http://www.compliance.sony.de/ Svenska Härmed försäkrar Sony Corporation att denna utrustning överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: http://www.compliance.sony.de/ XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\00COV-XAV-AX8000UC\060BCO.fm masterpage: BCO 010COV.book Page 46 Tuesday, May 14, 2019 8:26 PM Support site Site d’assistance Sitio Web de soporte If you have any questions or for the Si vous avez des questions ou si vous técnico en línea latest support information on this souhaitez consulter les toutes Para resolver cualquier duda u obtener product, please visit the web site dernières informations techniques la información más reciente sobre el below: sur ce produit, rendez-vous sur le soporte técnico de este producto, site Web suivant : visite el siguiente sitio Web: https://www.sony.com/am/support If you have any questions/problems regarding this product, try the following: 1 Read Troubleshooting in Help Guide (online manual). 2 Please contact (U.S.A. only); Call 1-800-222-7669 URL https://www.SONY.com Smartphone app App. de smartphone Aplicación para Support by Sony app - Find Support by Sony app - Trouvez des Smartphone information and get notification infos et recevez des notifications au Aplicación Support by Sony - Busque about your product: sujet de votre produit : información y obtenga notificaciones acerca de su producto: √ News & Alerts / Actus & Alertes / Noticias y Alertas √ Software updates / Mises à jour / Actualizaciones de software √ Tutorials / Didacticiels / Tutoriales √ Tips & Tricks / Conseils & Astuces / Consejos y Trucos https://sony.net/SBS ©2019 Sony Corporation Printed in Thailand https://www.sony.net/ XAV-AX8000 0-000-000-11(1)

E:\Works\0000000111\0000000111XAVAX8000UC\00COV-XAV-AX8000IN\060BCO.fm masterpage: BCO 010COV.book Page 47 Tuesday, May 14, 2019 8:26 PM Support site If you have any questions or for the latest support information on this product, please visit the web site below: https://www.sony-asia.com/support ©2019 Sony Corporation Printed in Thailand https://www.sony.net/ XAV-AX8000 5-007-578-21(1)

E:\Works\0000000111\0000000111XAVAX8000UC\00COV-XAV-AX8000EE17\060BCO.fm masterpage: BCO 010COV.book Page 48 Tuesday, May 14, 2019 8:26 PM Support site Site d’assistance Sitio Web de soporte If you have any questions or for the Si vous avez des questions ou si vous técnico en línea latest support information on this souhaitez consulter les toutes Para resolver cualquier duda u obtener product, please visit the web site dernières informations techniques la información más reciente sobre el below: sur ce produit, rendez-vous sur le soporte técnico de este producto, site Web suivant : visite el siguiente sitio Web: https://www.sony-asia.com/support ©2019 Sony Corporation Printed in Thailand https://www.sony.net/ XAV-AX8000 5-007-578-31(1)

E:\Works\0000000111\0000000111XAVAX8000UC\00COV-XAV-AX8050DEUR\060BCO.fm masterpage: BCO 010COV.book Page 49 Tuesday, May 14, 2019 8:26 PM Support site Support-Website If you have any questions or for the latest support Wenn Sie Fragen haben oder die neuesten information on this product, please visit Support-Informationen zu diesem Produkt abrufen the web site below: möchten, rufen Sie bitte folgende Website auf: Site d’assistance Sito di assistenza clienti Si vous avez des questions ou si vous souhaitez In caso di domande o per le informazioni più aggiornate consulter les toutes dernières informations techniques sul presente prodotto, visitare il seguente sito Web: sur ce produit, rendez-vous sur le site Web suivant : Sitio Web de soporte técnico en línea Para resolver cualquier duda u obtener la información más reciente sobre el soporte técnico de este producto, visite el siguiente sitio Web: https://www.sony.eu/support Register your product online now at: Registrieren Sie Ihr Produkt jetzt bei: Merci d’enregister votre produit en ligne sur : Registra online il tuo prodotto su: Registre su producto online en: https://www.sony.eu/mysony Smartphone app Smartphone App Support by Sony app - Find information and get Support by Sony App - Finden Sie Informationen und notification about your product: erhalten Sie Benachrichtigungen über Ihr Produkt: App. de smartphone App per smartphone Support by Sony app - Trouvez des infos et recevez des App Support by Sony - Trovate informazioni e ricevete notifications au sujet de votre produit : notifiche sul vostro prodotto: Aplicación para Smartphone Aplicación Support by Sony - Busque información y obtenga notificaciones acerca de su producto: √ News & Alerts / Nachrichten u. Alerts / Actus & Alertes / Novità e avvisi / Noticias y Alertas √ Software updates / Software-Updates / Mises à jour / Aggiornamenti software / Actualizaciones de software √ Tutorials / Anleitungen / Didacticiels / Tutorial / Tutoriales √ Tips & Tricks / Tipps u. Tricks / Conseils & Astuces / Consigli e suggerimenti / Consejos y Trucos https://sony.net/SBS ©2019 Sony Corporation Printed in Thailand https://www.sony.net/ XAV-AX8000 5-007-578-51(1)


Document Created: 2019-08-06 14:28:06
Document Modified: 2019-08-06 14:28:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC