RF Exposure Info._20190215_v1 - RF Exposure Info (SAR) Appendix A rev 2

FCC ID: A4RG020A

RF Exposure Info

Download: PDF
FCCID_4176554

FCC SAR Test Report Appendix A. SAR Plots of System Verification The plots for system verification with largest deviation for each SAR system combination are shown as follows. Report Format Version 5.0.0 Issued Date : Dec. 28, 2018 Report No. : SA181001C06-2

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/21 System Check_H750_181121 DUT: Dipole 750 MHz; Type: D750V3; SN: 1013 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: H06T09N1_1121 Medium parameters used: f = 750 MHz; σ = 0.894 S/m; εr = 43.418; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(10.34, 10.34, 10.34); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2018/08/27 - Phantom: Twin SAM Phantom_1654; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (61x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.68 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 57.28 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 3.02 W/kg SAR(1 g) = 1.99 W/kg; SAR(10 g) = 1.31 W/kg Maximum value of SAR (measured) = 2.68 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/30 System Check_H835_181130 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H07T10N1_1130 Medium parameters used: f = 835 MHz; σ = 0.923 S/m; εr = 42.374; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(10.13, 10.13, 10.13); Calibrated: 2018/08/29 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: Twin SAM Phantom_1652; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.18 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 61.00 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 3.64 W/kg SAR(1 g) = 2.3 W/kg; SAR(10 g) = 1.52 W/kg Maximum value of SAR (measured) = 3.19 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/30 System Check_H1750_181130 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: H16T20N1_1130 Medium parameters used: f = 1750 MHz; σ = 1.314 S/m; εr = 39.014; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(8.79, 8.79, 8.79); Calibrated: 2018/08/29 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: Twin SAM Phantom_1652; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 13.7 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 106.4 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 16.2 W/kg SAR(1 g) = 8.88 W/kg; SAR(10 g) = 4.7 W/kg Maximum value of SAR (measured) = 13.7 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/30 System Check_H1900_181130 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H16T20N1_1130 Medium parameters used: f = 1900 MHz; σ = 1.432 S/m; εr = 38.533; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(8.44, 8.44, 8.44); Calibrated: 2018/08/29 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: Twin SAM Phantom_1652; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 15.1 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 97.65 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 18.0 W/kg SAR(1 g) = 9.77 W/kg; SAR(10 g) = 5.1 W/kg Maximum value of SAR (measured) = 15.1 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 System Check_H2450_181113 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H19T27N1_1113 Medium parameters used: f = 2450 MHz; σ = 1.875 S/m; εr = 37.898; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(7.59, 7.59, 7.59); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 23.6 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 108.4 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 29.2 W/kg SAR(1 g) = 13.7 W/kg; SAR(10 g) = 6.28 W/kg Maximum value of SAR (measured) = 23.4 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/07 System Check_H2600_181107 DUT: Dipole 2600 MHz; Type: D2600V2; SN: 1020 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: H19T27N1_1107 Medium parameters used: f = 2600 MHz; σ = 2.043 S/m; εr = 37.822; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(7.37, 7.37, 7.37); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 37.2 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 130.0 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 46.5 W/kg SAR(1 g) = 13.4 W/kg; SAR(10 g) = 6.59 W/kg Maximum value of SAR (measured) = 37.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/20 System Check_H5250_181120 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: H34T60N1_1120 Medium parameters used: f = 5250 MHz; σ = 4.633 S/m; εr = 37.466; ρ = 1000 kg/m3 Ambient Temperature：23.8 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(5.46, 5.46, 5.46); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2018/08/27 - Phantom: Twin SAM Phantom_1654; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 17.1 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 65.34 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 33.2 W/kg SAR(1 g) = 8.41 W/kg; SAR(10 g) = 2.43 W/kg Maximum value of SAR (measured) = 17.5 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/20 System Check_H5600_181120 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: H34T60N1_1120 Medium parameters used: f = 5600 MHz; σ = 4.995 S/m; εr = 36.992; ρ = 1000 kg/m3 Ambient Temperature：23.8 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(5.05, 5.05, 5.05); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2018/08/27 - Phantom: Twin SAM Phantom_1654; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.3 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 69.30 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 31.2 W/kg SAR(1 g) = 7.99 W/kg; SAR(10 g) = 2.56 W/kg Maximum value of SAR (measured) = 19.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/15 System Check_H5750_181115 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: H34T60N2_1115 Medium parameters used: f = 5750 MHz; σ = 5.298 S/m; εr = 35.4; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(5.09, 5.09, 5.09); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.1 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 61.69 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 38.2 W/kg SAR(1 g) = 8.26 W/kg; SAR(10 g) = 2.36 W/kg Maximum value of SAR (measured) = 21.7 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/12/08 System Check_B750_181208 DUT: Dipole 750 MHz; Type: D750V3; SN: 1013 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: B06T09N1_1208 Medium parameters used: f = 750 MHz; σ = 0.96 S/m; εr = 56.416; ρ = 1000 kg/m3 Ambient Temperature：23.4 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(9.91, 9.91, 9.91); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2018/08/27 - Phantom: Twin SAM Phantom_1654; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.68 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.33 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 3.03 W/kg SAR(1 g) = 2.02 W/kg; SAR(10 g) = 1.34 W/kg Maximum value of SAR (measured) = 2.69 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/22 System Check_B835_181122 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: B07T10N1_1122 Medium parameters used: f = 835 MHz; σ = 0.985 S/m; εr = 53.787; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(9.74, 9.74, 9.74); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2018/08/27 - Phantom: Twin SAM Phantom_1822; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.16 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 59.02 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 3.54 W/kg SAR(1 g) = 2.35 W/kg; SAR(10 g) = 1.55 W/kg Maximum value of SAR (measured) = 3.14 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/12/06 System Check_B1750_181206 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: B16T20N2_1206 Medium parameters used: f = 1750 MHz; σ = 1.461 S/m; εr = 52.03; ρ = 1000 kg/m3 Ambient Temperature：23.4 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(8.2, 8.2, 8.2); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2018/08/27 - Phantom: Twin SAM Phantom_1822; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 13.6 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 99.80 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 15.7 W/kg SAR(1 g) = 8.87 W/kg; SAR(10 g) = 4.73 W/kg Maximum value of SAR (measured) = 13.4 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/21 System Check_B1900_181121 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: B16T20N1_1121 Medium parameters used: f = 1900 MHz; σ = 1.551 S/m; εr = 52.039; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(7.89, 7.89, 7.89); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2018/08/27 - Phantom: Twin SAM Phantom_1822; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 14.2 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 97.03 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 17.7 W/kg SAR(1 g) = 9.91 W/kg; SAR(10 g) = 5.22 W/kg Maximum value of SAR (measured) = 14.1 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/26 System Check_B2450_181126 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: B19T27N4_1126 Medium parameters used: f = 2450 MHz; σ = 2.022 S/m; εr = 51.416; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(7.61, 7.61, 7.61); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CB; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 18.9 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 98.35 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 25.5 W/kg SAR(1 g) = 12.4 W/kg; SAR(10 g) = 5.69 W/kg Maximum value of SAR (measured) = 19.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/21 System Check_B2600_181121 DUT: Dipole 2600 MHz; Type: D2600V2; SN: 1020 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: B19T27N3_1121 Medium parameters used: f = 2600 MHz; σ = 2.227 S/m; εr = 53.288; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(7.48, 7.48, 7.48); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2018/08/27 - Phantom: Twin SAM Phantom_1822; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 22.1 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 98.17 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 28.8 W/kg SAR(1 g) = 13.1 W/kg; SAR(10 g) = 5.87 W/kg Maximum value of SAR (measured) = 22.7 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/22 System Check_B5250_181122 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: B34T60N1_1122 Medium parameters used: f = 5250 MHz; σ = 5.366 S/m; εr = 49.229; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.4 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(4.95, 4.95, 4.95); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.4 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 69.82 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 32.1 W/kg SAR(1 g) = 7.85 W/kg; SAR(10 g) = 2.21 W/kg Maximum value of SAR (measured) = 19.9 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/26 System Check_B5600_181126 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: B34T60N1_1126 Medium parameters used: f = 5600 MHz; σ = 5.885 S/m; εr = 46.679; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(4.17, 4.17, 4.17); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CB; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.5 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 69.03 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 35.4 W/kg SAR(1 g) = 8.01 W/kg; SAR(10 g) = 2.24 W/kg Maximum value of SAR (measured) = 21.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/26 System Check_B5750_181126 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: B34T60N1_1126 Medium parameters used: f = 5750 MHz; σ = 6.115 S/m; εr = 46.433; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(4.45, 4.45, 4.45); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CB; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.7 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 62.70 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 35.9 W/kg SAR(1 g) = 7.93 W/kg; SAR(10 g) = 2.26 W/kg Maximum value of SAR (measured) = 20.5 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/26 System Check_B5250_181126 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: B34T60N1_1126 Medium parameters used: f = 5250 MHz; σ = 5.398 S/m; εr = 47.416; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(4.95, 4.95, 4.95); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CB; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 17.9 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 66.63 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 34.8 W/kg SAR(1 g) = 7.7 W/kg; SAR(10 g) = 2.17 W/kg Maximum value of SAR (measured) = 20.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/26 System Check_B5600_181126 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: B34T60N1_1126 Medium parameters used: f = 5600 MHz; σ = 5.885 S/m; εr = 46.679; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(4.17, 4.17, 4.17); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CB; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.5 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 69.03 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 35.4 W/kg SAR(1 g) = 8.01 W/kg; SAR(10 g) = 2.24 W/kg Maximum value of SAR (measured) = 21.0 W/kg


Document Created: 2019-02-15 19:36:53
Document Modified: 2019-02-15 19:36:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC