2AUGZNIT

FCC ID

Equipment: Bluetooth & WiFi module

ART S.P.A. NIT

Voc. Pischiello, 20, Passignano sul Trasimeno, N/A 06065 Italy

Application
Frequency Range
Final Action Date
Granted
vPTIO98ZLvLt++P/szCfyw==
13.56-13.56
2020-02-13
APPROVED
qdauYe+1hRhFmc6IGOPUfg==
5180.0-5240.0
2020-02-13
APPROVED
qdauYe+1hRhFmc6IGOPUfg==
5260.0-5320.0
2020-02-13
APPROVED
qdauYe+1hRhFmc6IGOPUfg==
5500.0-5700.0
2020-02-13
APPROVED
qdauYe+1hRhFmc6IGOPUfg==
5745.0-5825.0
2020-02-13
APPROVED
/m3UoP9M2Xdqs68y03xcRA==
2402.0-2480.0
2020-02-13
APPROVED
/m3UoP9M2Xdqs68y03xcRA==
2412.0-2472.0
2020-02-13
APPROVED
File NameDocument TypeDateDirect
External PhotosExternal Photos 2020-02-13 00:00:00 pdf
Authorization LetterCover Letter(s) 2020-02-13 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2020-02-13 00:00:00 pdf
Change in ID LetterCover Letter(s) 2020-02-13 00:00:00 pdf

Application Details:

EquipmentBluetooth & WiFi module
FRN0028774685
Grantee Code2AUGZ
Product CodeNIT
Applicant BusinessART S.P.A.
Business AddressVoc. Pischiello, 20 , Passignano sul Trasimeno,N/A Italy 06065
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantFrancesco Ortix – CEO
Applicant Phone
Applicant Fax+39 075 8298 525
Applicant Email[email protected]
Applicant MailStop
Test Firm7layers GmbH
Test Firm ContactBernhard Retka
Test Firm Phone
Test Firm Fax0049 2102 749 350
Test Firm Email[email protected]
Certified ByNicola Scartapacchio – Agent
Comment [/m3UoP9M2Xdqs68y03xcRA==]: RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz and 40 MHz bandwidth modes. This device also contains NFC and U-NII transmitters. C2PC to allow Limited Modular Approval use in a specific host with dedicated antenna trace design.
Comment [qdauYe+1hRhFmc6IGOPUfg==]: RF output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains 2.4 GHz WLAN, Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters. C2PC to allow Limited Modular Approval use in a specific host with dedicated antenna trace design.
Comment [vPTIO98ZLvLt++P/szCfyw==]: Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE), 2.4 GHz WLAN and U-NII transmitters.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC