2AS9OZ00718

FCC ID

Equipment: Hive Module

DANBY PRODUCTS LTD. Z00718

5070 WHITELAW ROAD, GUELPH ONTARIO, N/A N1H 6Z9 Canada

Application
Frequency Range
Final Action Date
Granted
HSK+hjS+AuXxoi5LUvsDCg==
2412.0-2462.0
2019-09-30
APPROVED
HSK+hjS+AuXxoi5LUvsDCg==
2432.0-2442.0
2019-09-30
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2019-09-30 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-09-30 00:00:00 pdf
Test Report 2 of 2Test Report 2019-09-30 00:00:00 pdf
Test Report 1 of 2Test Report 2019-09-30 00:00:00 pdf
MPE EvaluationRF Exposure Info 2019-09-30 00:00:00 pdf
Modular RequestCover Letter(s) 2019-09-30 00:00:00 pdf
Internal PhotosInternal Photos 2019-09-30 00:00:00 pdf
ID Label and Location InfoID Label/Location Info 2019-09-30 00:00:00 pdf
External PhotosExternal Photos 2019-09-30 00:00:00 pdf
Cover LetterCover Letter(s) 2019-09-30 00:00:00 pdf
Confidentiality RequestCover Letter(s) 2019-09-30 00:00:00 pdf
Agent AuthorizationCover Letter(s) 2019-09-30 00:00:00 pdf
Part 15BAttestation Statements 2019-09-30 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
SchematicsSchematics N/A

Application Details:

EquipmentHive Module
FRN0028460533
Grantee Code2AS9O
Product CodeZ00718
Applicant BusinessDANBY PRODUCTS LTD.
Business Address5070 WHITELAW ROAD , GUELPH ONTARIO,N/A Canada N1H 6Z9
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMuhammed A. Sayyed – CTO
Applicant Phone
Applicant Fax+1 (519) 837-9320
Applicant Email[email protected]
Applicant MailStop
Test FirmUltraTech Engineering Labs Inc
Test Firm ContactTri Luu
Test Firm Phone
Test Firm Fax905-829-8050
Test Firm Email[email protected]
Certified ByDan Huynh – Authorized Agent
Comment [HSK+hjS+AuXxoi5LUvsDCg==]: Limited Modular Approval. Power output listed is conducted. Power output reduction at band-edge channels is required for compliance as documented in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This module is approved for mobile configurations; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with instructions and operating conditions for satisfying RF Exposure compliance. This device has 20 and 40 MHz bandwidth modes.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC