2AR2O-VOB-P3310

FCC ID

Equipment: Jeston TX2 assembly PN YELC0050

Augmedics LTD -VOB-P3310

1 Htzmicha st, Yokneam, N/A 20692 Israel

Application
Frequency Range
Final Action Date
Granted
z+avZTKwqyziLJaWhIiVng==
2412.0-2472.0
2019-04-16
APPROVED
H22wHEe2cRCig1PCfmx2kw==
2402.0-2480.0
2019-03-11
APPROVED
H22wHEe2cRCig1PCfmx2kw==
2412.0-2472.0
2019-03-11
APPROVED
jUs2wsokrdp2y1ZbIpA03A==
2402.0-2480.0
2019-03-11
APPROVED
PfD/9dTIolZopLYyeS9RtA==
5180.0-5240.0
2019-03-11
APPROVED
PfD/9dTIolZopLYyeS9RtA==
5260.0-5320.0
2019-03-11
APPROVED
PfD/9dTIolZopLYyeS9RtA==
5500.0-5700.0
2019-03-11
APPROVED
PfD/9dTIolZopLYyeS9RtA==
5745.0-5825.0
2019-03-11
APPROVED
File NameDocument TypeDateDirect
Host User Manual Part 2Users Manual 2019-04-16 00:00:00 pdf
Host User Manual Part 1Users Manual 2019-04-16 00:00:00 pdf
Host Label and Label LocationID Label/Location Info 2019-04-16 00:00:00 pdf
Host External PhotosExternal Photos 2019-04-16 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-04-16 00:00:00 pdf
Internal Photos Module in HostInternal Photos 2019-04-16 00:00:00 pdf
C2PC Cover LetterCover Letter(s) 2019-04-16 00:00:00 pdf
ITL Authorization LetterCover Letter(s) 2019-04-16 00:00:00 pdf
731 Form Signature Authorization LetterCover Letter(s) 2019-04-16 00:00:00 pdf
Test ReportTest Report 2019-04-16 00:00:00 pdf
SAR Exemption CalculationRF Exposure Info 2019-04-16 00:00:00 pdf
Change NVIDIA Permission LetterCover Letter(s) 2019-03-11 00:00:00 pdf
Label Sample & Label LocationID Label/Location Info 2019-03-11 00:00:00 pdf
External PhotosExternal Photos 2019-03-11 00:00:00 pdf
Authorization LetterCover Letter(s) 2019-03-11 00:00:00 pdf
Form 731 Signature LetterCover Letter(s) 2019-03-11 00:00:00 pdf
Change Augmedics Request LetterCover Letter(s) 2019-03-11 00:00:00 pdf

Application Details:

EquipmentJeston TX2 assembly PN YELC0050
FRN0028067262
Grantee Code2AR2O
Product Code-VOB-P3310
Applicant BusinessAugmedics LTD
Business Address1 Htzmicha st , Yokneam,N/A Israel 20692
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantStuart Glen Wolf – CTO
Applicant Phone
Applicant Fax043730801
Applicant Email[email protected]
Applicant MailStop
Test FirmITL PRODUCT TESTING LTD
Test Firm ContactIlan Cohen
Test Firm Phone
Test Firm Fax+972 8 915 3101
Test Firm Email[email protected]
Certified ByIlan Cohen –
Comment [H22wHEe2cRCig1PCfmx2kw==]: Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Comment [jUs2wsokrdp2y1ZbIpA03A==]: Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Comment [PfD/9dTIolZopLYyeS9RtA==]: Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Comment [z+avZTKwqyziLJaWhIiVng==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used in a portable Host (headset of the “xvision-spine (XVS) ) Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC