2AQIP-NA3N101

FCC ID

Equipment: Indoor Noise Sensor is a WiFi-enabled noise monitoring device

NoiseAware, LLC -NA3N101

2800 Routh St Ste 215, Dallas, TX 75201 United States

Application
Frequency Range
Final Action Date
Granted
/xISePbP5JvrnJLGIU7sqA==
902.2-927.8
2019-02-01
APPROVED
/xISePbP5JvrnJLGIU7sqA==
2402.0-2480.0
2019-02-01
APPROVED
tf50TLgkgKThXeaJ7uDueg==
2402.0-2480.0
2019-02-01
APPROVED
tf50TLgkgKThXeaJ7uDueg==
2412.0-2462.0
2019-02-01
APPROVED
File NameDocument TypeDateDirect
Test Setup PhotosTest Setup Photos 2019-03-18 00:00:00 pdf
Product ManualUsers Manual 2019-03-18 00:00:00 pdf
Label and locationID Label/Location Info 2019-02-01 00:00:00 pdf
Internal PhotosInternal Photos 2019-03-18 00:00:00 pdf
Short Term Confidentiality RequestCover Letter(s) 2019-02-01 00:00:00 pdf
Long Term Confidentiality RequestCover Letter(s) 2019-02-01 00:00:00 pdf
External PhotosExternal Photos 2019-03-18 00:00:00 pdf
Test Report BTTest Report 2019-02-01 00:00:00 pdf
Test ReportTest Report 2019-02-01 00:00:00 pdf
Label and LocationID Label/Location Info 2019-02-01 00:00:00 pdf
Internal PhotoInternal Photos 2019-03-18 00:00:00 pdf
Test Report WLANTest Report 2019-02-01 00:00:00 pdf
Test Report BLETest Report 2019-02-01 00:00:00 pdf
BOMParts List/Tune Up Info N/A
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Technical DescriptionOperational Description N/A

Application Details:

EquipmentIndoor Noise Sensor is a WiFi-enabled noise monitoring device
FRN0027668318
Grantee Code2AQIP
Product Code-NA3N101
Applicant BusinessNoiseAware, LLC
Business Address2800 Routh St Ste 215, Dallas,Texas United States 75201
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantGarrett Lowen Dobbs – Head of Product
Applicant Phone
Applicant Fax2142329804
Applicant Email[email protected]
Applicant MailStop
Test FirmMET Laboratories
Test Firm ContactFrank Casbolt
Test Firm Phone
Test Firm Fax512 287 2513
Test Firm Email[email protected]
Certified ByGarrett Dobbs – Head of Product
Comment [/xISePbP5JvrnJLGIU7sqA==]: Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with multi-transmitter product procedures.
Comment [tf50TLgkgKThXeaJ7uDueg==]: Output Power listed is conducted. This device supports 20MHz and 40MHz bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with multi-transmitter product procedures.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC