15_H5053 UserMan-US

FCC ID: 2AQA6-H5053

Users Manual

Download: PDF
FCCID_4459131

At a glance Specification @ Set family Wi—Fi information; @ Return to APP; ownload on the a——=— App Store RF Wi—Fi Gateway ®— Wi—Fi Pairing key e—— Voltage AC110—240V 50/60Hz GET IT ON 433 Pairing key LED indicator Google Play Wi—Fi frequency 24Ghz Wi—Fi working distance 30m/100ft RF Wi—Fi Gateway RF working frequency 433MHZ —¥%)J—®@ P {_—— Blue light flashes quickly. RF working distance (in open ground) 100m/328ft Connection Waterproof Thermo—Hygrometer 3. Place the sensor. @ Enter into Wi—Fi setting page of your phone; @Connection succeeded. Note: Please make sure the Wi—Fi network is 2.4GHz and o_3 m Waterproof Thermo—Hygrometer Seitings 802.11 b/g/n bands before you start to connect gateway to Voltage DC 3V Govee Home App the network. es > We are devoted to offer you a better user experience Working distance (in open ground) 100m/328ft @ Connect your phone with family Wi—Fi networkfirst; with our smart and connected technology. RF Wi—Fi Gateway What you need: Accuracy Temp: £0.3°C, Humidity: +3% @© Open the app, tap "+" icon at the top right corner and Wi—Fi pairing button:For pairing network and the gateway. @ A Wi—Fi router supporting the 2.4GHz (not 5 GHz) and 802.11 433 pairing button:For pairing sensor and the gateway. Operating temperature Operating humidity —20°C~60°C (4°F ~140°F) 0% — 99% b/g/n bands. Please check your network information before select "H5040"or"H5053"; 9 kz=_/ Blue light keeps bright. you try to connect. © Gateway enters into the pairing mode; ¥_== LED indicator:For reflecting the status of the gateway: @® Connect gateway Wi—Fi; @ Connection failed. @ A smart phone or tablet which could be connected to a Installation O= "Govee_gateway_XOQX® Blue light is always on Wi—Fi connection is normal 2.4Ghz Wi—Fi network and runs 109.3 system(or above} or Press for 3s. Red lightis always on Wi—Fi connection failed Android 4.3 system (or above). cez Blue light flashes slowly Wi—Fi pairing mode 1.Plug the gateway into the socket; Download the GoveeHome app from the App Store (IOS Blue lightflashes slowly. Red light keeps bright. devices) or Google Play {Android devices}. Red and blue lights flash 2.Pull out the battery insulation sheet; Searching for sensor alternately Please recheck the above steps and try again. Blue light flashes quickly The gateway is connecting

Using your device ———°F 3. Gateway receives the signal. Troubleshooting and Warning 4. The sensor faults or misses some data? FCC STATEMENT cCoOVEE BUILD SMART THINGS a. Shorten the distance and reduce the barriers between the ——% sensor and gateway. This device complies with Part 15 of the FCC Rules. Operation is @ Controlling your devices with the Govee— Troubleshooting subject to the following two conditions: Home app. Calibration: 8 Blue light flashes quickly. b. Please removeall the H5053 devices in the APP and then (1) This device may not cause harmful interference, and {2) This Calibrate temp/humidity data 1. The gateway could not be connected to the Wi—Fi network or re—pair. device must accept any interference received, including the connection is unstable? c. Replace the battery. interference that may cause undesired operation. Alarm me 4. Connection succeeded. a. Product supports only 2.4 GHz {not 5 GHz) network. ® Add sensor Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to Alarm me O Please refer to the following steps to add sensor or re—add b. Check the name of the network and the password. Please Warning operate the equipment. try to avoid special characters. sensor back: 1. Please ensure that the product works within the specified Message Alert: NOTE: This equipment has been tested and found to comply App pushes alert messages once temp/humidity is beyond 1. Gateway enters into the pairing mode. c. The device should be placed within the coverage of the temperature and humidity range. Blue light keeps bright. with the limits for a Class B digital device, pursuant to Part 15 of the preset range. router signal. Please keep the distance between the 2. Please do not violently disassemble the product. FCC Rules. gateway and the router in 30 meters (100ft) . Press for 35. These limits are designed to provide reasonable protection against Red and blue indicator flash alternately. Attention: a. If you have not paired the gateway and sensor d. Reduce barriers like metal door or multiple / heavy walls; gateway and the router in 30 meters (100ft) . Customer Service harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause User Manual Export Data: successfully within 305, the gateway indicator will turn 2. The sensors do not work? harmful interference to radio communications. However, there is Export data in CSV format after filling in email and time slot. blue automatically and flash quickly, and then exit the pairing mode; a. Pull out the insulation sheet before using. @ Warranty: 12—Month Limited Warranty no guarantee that interference will not occur in a particular 2. Sensor sends the pairing signal. installation. If this equipment does cause harmful interference to {) @ 0 b. Check the battery capacity. radio or television reception, which can be determined by turning b. If the connection fails, please carefully check the above Temperature unit steps and repeat the attempts. c. Check if the sensor installed correctly. @ Support: Lifetime Technical Support the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 3. The app alarm is delayed or no alarm? Unit Switch: @ Email: support@govee.com 1.Reorient or relocate the receiving antenna. Switch temp unit in App a. Turn on the relevant permissions to the "GoveeHome" APP. 2.Increase the separation between the equipment and receiver. (Note: Temp unit in export data is the same as that in App) b. Shorten the distance and reduce the barriers between the Official Website: www.govee.com 3.Connect the equipment into an outlet on a circuit different from sensor and gateway. that to which the receiveris connected. n @Govee D @Govee Q @Govee @Goveeofficial Pull out the batteries and then place batteries back. 4.Consult the dealer or an experienced radio/TV technician for help. 10 11

深圳市智岩科技有限公司 2019.08.26 受控文件


Document Created: 2019-08-26 17:44:30
Document Modified: 2019-08-26 17:44:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC