User manual

FCC ID: 2APZHSC93200MDBVG3

Users Manual

Download: PDF
FCCID_4050596

CidronVG3 Firmwarev1.7 Upgrade Manual upgrade Step RS485 2018.07.12(Slim) Sep1: Connect CidronVG3. RS485 4.B/RX 3.A/TX 2.GND 1.DC+ 16.K-LED 15.BZ 14.R-LED 13.G-LED 12.D-/TX 11.D0 10.D1 9.D+/RX 8.T/GPIO3 7.GPIO1 6.GPIO2 5.GND 4.B/RX 3.A/TX 2.GND 1.DC+

 PS :RS485 communication mode Step2: Select “Start” → “Program” → “Accessory” → ”Communication” →”hyper terminal” to open the hyper terminal software: Step3: Input any name in the Name Option defined yourself, such as: Step4: Choose correct serial port you now using, and click “OK” button:

Step5: Setting correct port parameters as the following: If “main menu “display, Input the key “1” at once. Then there will emerge “CCC….

Step6: Click the button with red circle： Step7: Choose protocol “Ymodem”, click “Browse” button to search for the file you need download, then click “Send” button,: Note：Firmware document must be BIN document. Program is downloading, please wait…….

Step8: When download completed, software will also show successful and Card reader will restart FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.


Document Created: 2018-10-16 16:52:44
Document Modified: 2018-10-16 16:52:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC