User Manual QSG

FCC ID: 2APONROS001US

Users Manual

Download: PDF
FCCID_4112116

Orion Sync SUPPORT Health / Safety Warnings Turn Orion Sync off immediately if there is any reason to suspect that interference is taking place. E-mail Exposure to Radio Frequency Maintain a safe distance between Orion Sync and the support@orionlabs.io This is an IOT Device as M2M exception. This device complies implantation site. Carry or use Orion Sync on the opposite side of their body from the implantable device to minimize the potential with part 15 of the FCC Rules. Operation is subject to the for interference. Phone following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference 1-866-855-4249 received, including interference that may cause undesired Operation in RF-Sensitive Environments operation. Orion Sync is not intended for operation in RF-sensitive environments. Turn off Orion Sync before entering aircraft, OLED HELPFUL LINKS For more information, please visit support.orionlabs.io/orion- areas with potentially explosive atmosphere, certain healthcare Display sync/warnings facilities, and other RF-sensitive environments. Observe signs and Online Knowledge-base notices that prohibit or restrict the use of electronic devices. support.orionlabs.io Maintaining dust/water resistance Mics Orion Sync is dust/splashproof from any direction to IP54 Do Not Disassemble Orion Command Center standards. Orion Sync is resistant to dust and splashes only when Do not disassemble or attempt to repair Orion Sync. Doing so the battery pack is installed. Change the battery pack only when login.orionlabs.io will void the manufacturer’s warranty and may result in damage Orion Sync is dry. to the device or personal injury. If you suspect your device isn’t Speaker To maintain the device’s water and dust resistance, insert only performing as intended or needs repair, please contact Orion View PDF Online standard micro USB and 3.5mm audio connectors into the support at support@orionlabs.io orionlabs.io/sync-guide appropriate ports when Orion Sync is clean and dry. Do not Navigation insert foreign objects into any part of Orion Sync, including the Lithium-ion Battery Select microphone and speaker ports. Order Orion Sync Accessories This device contains a lithium-ion battery which may catch fire or PTT Previous orionlabs.io/shop/orion-sync The included charger is not waterproof. Do not expose to rain or explode if damaged or punctured. Do not disassemble, puncture, snow. Charge Orion Sync only in a dry location. Button Next crush, incinerate, or short-circuit device or battery pack. For your Cancel safety, never handle a damaged or leaking battery pack Medical Device Interactions Orion Sync contains components and radios that emit Disposal Info electromagnetic fields. These electromagnetic fields may interfere with defibrillators, pacemakers, or other medical DO NOT THROW IN TRASH - RECYCLE WITH E-WASTE devices. Persons with active implantable medical devices (AIMD) Do not dispose of Orion Sync or battery packs with household should: trash. Device and battery pack should be disposed of properly according to local laws and regulations regarding electronic Consult with their physicians regarding the potential risk of waste and lithium-ion batteries. For more information, contact interference from radio frequency transmitters, such as cell your local waste disposal authority. USER GUIDE phones. orionlabs.io/sync-guide

Orion Sync is a rugged Install Clip (optional) or laptop, visit orionlabs.io/start and enter the code displayed on Orion Sync. push-to-talk device powered Installation: Remove locking Administrators can assign devices to users with the screw. Press the clip post Mute EMR (Panic) by the Orion Voice Platform. firmly into the hole on the Orion Command Center. Battery Connect instantly with team Switch Button back of the device until you Release If no code is displayed, your device is already Button hear a “click”. Replace screw registered. Log out using the Orion Command members, Orion Voice Bots, and tighten to lock clip in place. Center, or on the device under Account → Log Out. and other integrations. Removal: Remove locking Talking on Orion Sync screw. Pull firmly on 1. Press and hold the Push-To-Talk (PTT) Button and clip until it separates listen for a tone. from device. Replace screw Charging GET STARTED for safekeeping. 2. When you hear the tone, begin speaking. Contacts 3. Release the PTT Button when you’re finished Install Battery Pack Power On sending your message. Installation: Press the Battery Pack into the device Power on. If Orion Sync is off, press and hold the Orion as shown below. Power Button ( ) until you see the Orion Labs logo OrionAction Voice Voice Action EMR on the display. Button EMR Button Mute (Panic) ion Mute Switch Battery (Panic) If your device is unresponsive, plug in your device Battery Button stion Switch Release Button ls Release and let it charge. Button Button Power off. If Orion Sync is on, press and hold the Volume Power Button ( ) until you see “Power Off?”. Then, Volume Power Control Power press the Select Button ( ) to turn off. Control Button Button 3.5mm 3.5mm Removal: Press and hold the Battery Release Button Register On Orion Network For tips on how to get the most of Orion Sync, visit Headphone Charging support.orionlabs.io Headphone to remove the Battery Pack. Charging Jack Contacts After powering on, you will see a code. On a desktop Jack Contacts


Document Created: 2018-11-29 12:16:12
Document Modified: 2018-11-29 12:16:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC