Users Manual

FCC ID: 2APJZ-CW003

Users Manual

Download: PDF
FCCID_4305035

6.5' BH NOBLE FIR TREE WITH EASY PLUG® AND LED COLOR+CLEAR® LIGHTS OWNER’S MANUAL 26 Watts Thank you for purchasing your Christmas tree from Balsam Hill®. The instructions below will help you quickly and easily set up your new tree. 1. Find a level surface near an electrical outlet and assemble the tree stand as shown in Fig. A. Fig. A - Tree Stand Assembly Eye Bolt 1. Pull apart the legs of the stand so that they are x-shaped. 2. When inserting the bottom section of the tree into the assembled stand, thread the eyebolt into the stand and tighten until the pole is firmly secured. Fig. B - Assembling the tree *Electrical Rating For The Tree (For Indoor Use Only) Input: AC 120V, 60Hz, 0.45A ASSEMBLY INSTRUCTIONS Output: DC 29V, 0.9A Section 3 Connect Plugs & Extension Connect Plugs & Extension Cord of the same color Cord of the same color Do Not Tamper Internal Parts Section 2 Open the protective cap OR COL OF CLEAR F CO OR +CL L EAR Section 1 Power indicator Remote Control AR CLE L OR+ CLE AR R CO COLO Light Controller Plug Adapter Into Wall Outlet 2. Each tree section is numbered with a tag. Please identify all sections before assembling. MADE IN CHINA 3. Assemble the tree from bottom to the top. Start with the bottom section (section 1) and remove the protective cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the stand. ITEM #: NOB-T-2373/1200LEDCC-PE/PVC-P-LV 1

4. Plug the adapter into the wall outlet (See Fig. B) and use the remote control to turn on the lights. This section of your tree should now be lit. If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connect the plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree. 5. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges. Begin to shape the branches and tips in the bottom section inserted into the tree stand. Start with the tips closest to the middle of the tree; pull the individual tips alternately upward and outward working your way to the tip of the branches (See Fig. C). Work row by row to the upper part of the tree section leaving no tip untouched. Continue to shape each branch as described above as you set up each tree section. Fig. C Side view Top view 6. Find the next section, remove the protective cap, and insert the section into the bottom section. Turn the pole ASSEMBLY INSTRUCTIONS of the section and make sure the pole is inserted into place. When properly inserted, you should see the section light up (if you have already turned on the lights using your remote control). Continue this step and step 5 until the entire tree is set up, lit, and ready to be decorated. STORAGE INSTRUCTIONS 1. Unplug adapter from the wall outlet first and then remove all ornaments and decorations. 2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole. 3. Continue by gently lifting each section straight up from the section below. Fold all branches toward the pole until the bottom section is removed from the tree stand. Cover the protective cap on the poles to avoid damaging the internal parts. (See Fig. D) 4. Carefully place all tree sections into the storage bags within the shipping Fig. D box(es) and tape the box(es) shut. 5. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity may damage your tree. 6. Keep out of reach of pets and children. TROUBLESHOOTING TIPS For Pre-lit Trees, If The Tree Does Not Illuminate 1. Check to make sure that all plugs and adapter are properly connected as indicated in Fig. B. 2. Turn the poles gently to make sure pole-to-pole connection is secured. 3. Check for loose, broken or missing bulbs, and replace as needed. LOOSE BRANCHES 1. Extra hinge pins are included for repairing the hinges of the branches. Place the branch into the slot of the bracket. 2. Insert a new hinge pin through the hole and secure using the retainer washer. (See Fig. E) Fig. E SPARE PARTS Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs are also included. If extra parts are needed, please contact our Customer Service Center at customerservice@balsamhill.com CAUTION: 1. To reduce the risk of fire and electric shock: MADE IN CHINA a) Use only the power supply that was provided with this product; b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal, and c) Do not mount or support strings in a manner that can cut or damage wire insulation. 2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or electrical shock hazards. 2

Light Controller & Remote Control Press to turn all lights to multicolor Press to turn all R C lights to clear R CL O O LE COL EAR COL AR Press to turn all lights off CO R CO LOR CLEA Press to turn the LOR AR + +CLE lights half clear and half multicolor This red LED power indicator will blink whenever any button + + is pressed. Replace the battery (see below) when the LED gets dim. - ASSEMBLY INSTRUCTIONS - Press to choose from 13 levels of brightness. The lights of the tree will blink once with each press until the brightest or dimmest level is reached. Battery Replacement 1. Slide open the battery cover. 2. Replace with a new CR2032 button cell battery with correct polarities (+/-) as indicated. 3. Slide the battery cover closed. CR2032 battery (not included) WARNING: 1. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death. 2. This product contains a lithium battery which if swallowed has been known to cause death. 3. Do not expose the product to moisture. 4. Remove batteries when not used for an extended period of time, or when depleted. 5. Dispose of used batteries properly by following directions on batteries. 6. Use only CR2032 batteries for the remote controller. 7. Clean the battery contact surfaces gently prior to battery installation. MADE IN CHINA 8. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK. 3

S MANUAL

FCC notices: WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 5


Document Created: 2019-06-03 22:01:17
Document Modified: 2019-06-03 22:01:17
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC