Test Report_DSC_SZ18080155W01_433MHz

FCC ID: 2AONI-PRO-VSKN01

Test Report

Download: PDF
FCCID_4001457

REPORT No.：SZ18080155W01 TEST REPORT APPLICANT : Vaultek Safe, Inc. PRODUCT NAME : Smart key Nano MODEL NAME : VSK-N BRAND NAME : VAULTEK FCC ID : 2AONI-PRO-VSKN01 STANDARD(S) : 47 CFR Part 15 Subpart C TEST DATE : 2018-09-05 ISSUE DATE : 2018-09-07 Tested by: Ya Xinhou (Test Engineer) Approved by: Peng Huarui ( Supervisor ) NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn

REPORT No.：SZ18080155W01 DIRECTORY 1. Technical Information ··················································································· 4 1.1. Applicant and Manufacturer Information ······················································· 4 1.2. Equipment Under Test (EUT) Description ······················································ 4 1.3. Test Standards and Results ········································································ 5 1.4. Environmental Conditions ·········································································· 5 2. 47 CFR Part 15C Requirements ······································································ 6 2.1. Antenna requirement ················································································· 6 2.2. The Max Transmission Time ········································································ 7 2.3. 20dB Bandwidth ························································································ 9 2.4. Conducted Emission ················································································· 11 2.5. Radiated Emission ···················································································· 13 Annex A Test Uncertainty ················································································ 20 Annex B Testing Laboratory Information ··························································· 21 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 2 0f 22

REPORT No.：SZ18080155W01 Change History Issue Date Reason for change 1.0 2018-09-07 First edition MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 3 0f 22

REPORT No.：SZ18080155W01 1. Technical Information Note: Provide by applicant. 1.1. Applicant and Manufacturer Information Applicant: Vaultek Safe, Inc. Applicant Address: 37 N Orange Ave.Suite 800B Orlando, FL 32801,United States Manufacturer: Jeritech Electronics, Ltd. Manufacturer Address: Guannanyong Industrial Estate, Shiqi Town, Panyu, GuangZhou, China 1.2. Equipment Under Test (EUT) Description Product Name: Smart key Nano Serial No: (N/A, marked #1 by test site) Hardware Version: R12 Software Version: R12 Modulation Type: ASK Operating Frequency: 433.92MHz Channel Number: 1 Antenna Type: PCB Antenna Antenna Gain: 1.36 dBi Note 1: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 4 0f 22

REPORT No.：SZ18080155W01 1.3. Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart C for the EUT FCC ID Certification: No Identity Document Title 1 47 CFR Part 15 (10-1-15 Edition) Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Test Date Test Engineer Result 1 15.203 Antenna Requirement N/A N/A PASS 2 15.231(a)(1) The Max Transmission Time Sep 05, 2018 Ya Xinhou PASS 3 15.231(c) 20dB Bandwidth Sep 05, 2018 Ya Xinhou PASS 4 15.207 Conducted Emission N/A N/A N/A Note1 15.231(b) 5 Radiated Emission Sep 05, 2018 Ya Xinhou PASS 15.209(a) Note 1: Measurements to demonstrate compliance with the conducted limits are not required for devices which only employ battery power for operation and which do not operate from the AC power lines or contain provisions for operation while connected to the AC power lines. Note 2: The tests were performed according to the method of measurements prescribed in ANSIC63.10-2013. 1.4. Environmental Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 35 Relative Humidity (%): 30 -60 Atmospheric Pressure (kPa): 86-106 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 5 0f 22

REPORT No.：SZ18080155W01 2. 47 CFR Part 15C Requirements 2.1. Antenna requirement 2.1.1. Applicable Standard According to FCC 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. 2.1.2. Result: Compliant The EUT has a permanently and irreplaceable attached antenna. Please refer to the EUT internal photos. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 6 0f 22

REPORT No.: $Z18080155W01 2.2. The Max Transmission Time 2.2.1. Requirement A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. 2.2.2. Test Description A. Test Setup: Test Antenna« 4A i < im ... 4m > ii 1 i ¥ Receiver« |—| Preamplifiere 2.2.3. Test procedure Set the SPA Center Frequency=Fundamental frequency, RBW=100 kHz, VBW=300KHz, Span=0Hz, Sweep time=10s. Set EUT as normal operation and press Transmitter button. Set the SPA View. Delta Mark time. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—a060858s Fax 8e—765—a0008525 M o R LA B FL1—3, Building A, FeiYeng Science Park, No.8 LongChang Road, Bock7, BaoAn Distret, ShenZhen , GuangDong Province, P. R. China Hitp:Jwwaw.mortab.on E—mail: service@morlab.on Page 7 or 22

REPORT No.：SZ18080155W01 2.2.4. Test Result The frequency(433.92MHz) is selected to perform testing to verify the radiated max transmission time of the EUT. A. Test Verdict: Frequency (MHz) The max transmission time Limit Verdict 433.92 1225 ms ≤5000ms PASS B. Test Plots: (The max transmission time _433.92MHz) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 8 0f 22

REPORT No.: $Z18080155W01 2.3.20dB Bandwidth 2.3.1. Requirement The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70 MHz and below 900 MHz. For devices operating above 900 MHz, the emission shall be no wider than 0.5%of the center frequency. Bandwidth is determined at the points 20 dB down from the modulated carrier. As the center frequency for the device operating is 433.92MHz, thus, the 200B bandwidth limit is 1085 kHz. 2.3.2. Test Description A. Test Set: Test Antenna« Ai <im .. 4m > i1 ii V Receiver« |—| Preamplifiere 2.3.3. Test procedure Set spectrum analyzer‘s Center Frequency =Fundamental frequency, RBW, VBW and span to applicable value with Peak in Max Hold, A PEAK output reading and 20db Bandwidth function in spectrum analyzer were taken. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—766—38008005 M o R LA B FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Bock7, BaoAn Distret, ShenZhen , GuangDong Province, P. R. China Hitp:Jwwaw.mortab.on E—mail: service@morlab.on Page 9 0r 22

REPORT No.：SZ18080155W01 2.3.4. Test Result The lowest, middle and highest channels are selected to perform testing to record the 20 dB bandwidth of the module. A. Test Verdict: Frequency (MHz) 20 dB Bandwidth (MHz) Limits(MHz) Result 433.92 0.34 ≤1.085 PASS B. Test Plots: (Bandwidth_433.92MHz) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 10 0f 22

ORLAB, ' REPORT No.: $Z218080155W01 2.4.Conducted Emission 2.4.1. Requirement According to FCC section 15.207, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency within the band 150kHz to 30MHz shall not exceed the limits in the following table, as measured using a 50uH/50Q line impedance stabilization network (LISN). Frequency range Conducted Limit (dBuV) (MHz) Quai—peak Average 0.15 — 0.50 66 to 56 56 to 46 0.50 — 5 56 46 5 — 30 60 50 NOTE: (a) The lower limit shall apply at the band edges. (b) The limit decreases linearly with the logarithm of the frequency in the range 0.15 — 0.50MHz. 2.4.2. Test Description A. Test Setup: $ a0cm > _ EUT ~x A i < 80cm > Pulse Limiter < 8Ocm » LISN o o— Receiver & The Table—top EUT was placed upon a non—metallic table 0.8m above the horizontal metal reference ground plane. EUT was connected to LISN and LISN was connected to reference Ground Plane. EUT was 80cm from LISN. The set—up and test methods were according to ANSI ©63.10: 2013. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—766—38008005 M o R LA B FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Bock7, BaoAn Distret, ShenZhen , GuangDong Province, P. R. China Hitp:Jwwaw.mortab.on E—mail: service@morlab.on Page 11 0t 22

REPORT No.：SZ18080155W01 B. Equipments List: Please reference ANNEX A(1.5). 2.4.3. Test Result A. Test setup: N/A B. Test Plots: N/A MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 12 0f 22

REPORT No.：SZ18080155W01 2.5. Radiated Emission 2.5.1. Requirement According to FCC section 15.247(d), radiated emission outside the frequency band attenuation below the general limits specified in FCC section 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in FCC section 15.205(a), must also comply with the radiated emission limits specified in FCC section 15.209(a). According to FCC section 15.209 (a), except as provided elsewhere in this subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency (MHz) Field Strength (µV/m) Measurement Distance (m) 0.009 - 0.490 2400/F(kHz) 300 0.490 - 1.705 24000/F(kHz) 30 1.705 - 30.0 30 30 30 - 88 100 3 88 - 216 150 3 216 - 960 200 3 Above 960 500 3 FCC Part 15.231(b) Field strength of fundamental Field strength of spurious Fundamental frequency(MHz) (microvolts/meter) emission(microvolts/meter) 40.66-40.70 2250 225 70-130 1250 125 130-174 1250 to 3750 125 to 375 174-260 3750 375 260-47 3750 to 12500 375 to 1250 Above 470 12500 1250 Note: 1. For Above 1000MHz, the emission limit in this paragraph is based on measurement instrumentation employing an average detector, measurement using instrumentation with a peak detector function, corresponding to 20dB above the maximum permitted average limit. 2. For above 1000MHz, limit field strength of harmonics: 54dBuV/m@3m (AV) and 74dBuV/m@3m (PK) In addition, radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), also should comply with the radiated emission limits specified in Section 15.209(a)(above table) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 13 0f 22

REPORT No.: $Z18080155W01 2.5.2. Test Description A. Test Setup: 1) For radiated emissions from 9kHz to 30MHz Test Antenna— Receiver« |—| Preamplifiere 2) For radiated emissions from 30MHz to1GHz Test Antenna« Ai 1 <Im ... 4m > i 1i v rmumk Tum Tablee z> : : —= Receivere |—| Preamplifiere SHENZHEN MORLAB CONMMUNICATIONS TECHNOLOEY Co., Ltd. Tel: 86—755—30608555 Fax 80—755—30608525 M o R LA B FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Bock67, BaoAn District, ShenZhen , GuangDong Province, F. R. China Hitp:wwaw. mortab.on E—mail: service@morlab.on Page 14 or 22

REPORT No.：SZ18080155W01 3) For radiated emissions above 1GHz The RF absorbing material used on the reference ground plane and on the turntable have a maximum height (thickness) of 30 cm (12 in) and have a minimum-rated attenuation of 20 dB at all frequencies from 1 GHz to 18 GHz. Test site have a minimum area of the ground plane covered with RF absorbing material as specified in Figure 6 of ANSI C63.4: 2014. The test site semi-anechoic chamber has met the requirement of NSA tolerance 4dB according to the standards: ANSI C63.10:2013. For radiated emissions below or equal to 1GHz, The EUT was set-up on insulator 80cm above the Ground Plane, for radiated emissions above 1GHz, The EUT was set-up on insulator 150cm above the Ground Plane. The set-up and test methods were according to ANSI C63.10:2013. The EUT is located in a 3m Semi-Anechoic Chamber; the antenna factors, cable loss and so on of the site as factors are calculated to correct the reading. For the Test Antenna: (a) In the frequency range of 9kHz to 30MHz, magnetic field is measured with Loop Test Antenna. The Test Antenna is positioned with its plane vertical at 1m distance from the EUT. The center of the Loop Test Antenna is 1m above the ground. During the measurement the Loop Test Antenna rotates about its vertical axis for maximum response at each azimuth about the EUT. (b) In the frequency range above 30MHz, Bi-Log Test Antenna (30MHz to 1GHz) and Horn Test Antenna (above 1GHz) are used. Place the test antenna at 3m away from area of the EUT, while keeping the test antenna aimed at the source of emissions at each frequency of significant MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 15 0f 22

REPORT No.：SZ18080155W01 emissions, with polarization oriented for maximum response. The test antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final test antenna elevation shall be that which maximizes the emissions. The test antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. The emission levels at both horizontal and vertical polarizations should be tested. B. Equipments List: Please reference ANNEX A(1.5). 2.5.3. Test Result According to ANSI C63.10, because of peak detection will yield amplitudes equal to or greater than amplitudes measured with the quasi-peak (or average) detector, the measurement data from a spectrum analyzer peak detector will represent the worst-case results, if the peak measured value complies with the quasi-peak limit, it is unnecessary to perform an quasi-peak measurement. The measurement results are obtained as below: E [dBμV/m] =UR + AT + AFactor [dB]; AT =LCable loss [dB]-Gpreamp [dB] AT: Total correction Factor except Antenna UR: Receiver Reading Gpreamp: Preamplifier Gain AFactor: Antenna Factor at 3m During the test, the total correction Factor A T and A Factor were built in test software. Note1: All radiated emission tests were performed in X, Y, Z axis direction. And only the worst axis test condition was recorded in this test report. Note2: The low frequency, which started from 9 kHz to 30MHz, was pre-scanned and the result which was 20dB lower than the limit line per 15.31(o) was not reported. Note3: The duty cycle is simply the on-time divided by the period: The duration of one cycle: 1.805ms Effective period of the cycle: 1.245 ms Duty cycle: 0.69 Therefore, the average factor is found by 20log (Duty cycle) =-3.22 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 16 0f 22

REPORT No.：SZ18080155W01 A. Test Results for Field strength of fundamental Receiver Final Final AFactor AV Fre. Reading AT Emission_ Emission Limit-AV Antenna (dB@ factor Verdict (MHz) UR (PK) (dB) PK _AV (dBµV/m) 3m) (dB) (dBuV) (dBuV/m) (dBuV/m) 433.915 Horizontal 93.86 -32.24 16.08 77.70 -3.22 74.48 80.83 PASS 433.915 Vertical 83.97 -32.24 16.08 67.81 -3.22 64.59 80.83 PASS (433.92MHz, Antenna Horizontal) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 17 0f 22

REPORT No.：SZ18080155W01 (433.92MHz, Antenna Vertical) B. Test Results for Field strength of spurious emission Final Final Frequency AV Limit-AV Emission_PK Emission_AV Antenna Verdict (MHz) factor(dB) (dBuV/m) (dBuV/m) (dBuV/m) 1735.654 48.09 -3.22 44.87 60.63 Horizontal PASS 2169.800 53.61 -3.22 50.39 60.63 Horizontal PASS 3035.861 45.90 -3.22 42.68 60.63 Horizontal PASS 1735.654 48.64 -3.22 45.42 60.63 Vertical PASS 2169.900 53.56 -3.22 50.34 60.63 Vertical PASS MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 18 0f 22

REPORT No.：SZ18080155W01 C. Test Plots for the Whole Measurement Frequency Range: Fre. Pk QP AV Limit-PK Limit-QP Limit-AV Antenna Verdict (MHz) (dBμV/m) (dBμV/m) (dBμV/m) (dBμV/m) (dBμV/m) (dBμV/m) 97.985 29.25 N/A N/A N/A 43.50 N/A Horizontal PASS 434.268 36.02 N/A N/A N/A 46.00 N/A Horizontal PASS 1735.654 48.09 N/A 44.87 80.83 N/A 60.63 Horizontal PASS 2169.800 53.61 N/A 50.39 80.83 N/A 60.63 Horizontal PASS 3035.861 45.90 N/A 42.68 80.83 N/A 60.63 Horizontal PASS 5744.717 46.19 N/A 39.45 80.83 N/A 60.63 Horizontal PASS (433.92MHz, Antenna Horizontal, 30MHz to 10GHz) Fre. Pk QP AV Limit-PK Limit-QP Limit-AV Antenna Verdict (MHz) (dBμV/m) (dBμV/m) (dBμV/m) (dBμV/m) (dBμV/m) (dBμV/m) 89.487 27.62 N/A N/A N/A 43.50 N/A Vertical PASS 468.260 28.29 N/A N/A N/A 46.00 N/A Vertical PASS 1735.654 48.64 N/A 45.42 80.83 N/A 60.63 Vertical PASS 2169.900 53.56 N/A 50.34 80.83 N/A 60.63 Vertical PASS 3219.167 45.55 N/A 38.81 80.83 N/A 60.63 Vertical PASS 5724.350 46.07 N/A 39.33 80.83 N/A 60.63 Vertical PASS (433.92MHz, Antenna Vertical, 30MHz to 10GHz) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 19 0f 22

REPORT No.：SZ18080155W01 Annex A Test Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for test performed on the EUT as specified in CISPR 16-1-2: Test items Uncertainty 20dB Bandwidth ±5% Transmission time ±5% Radiated Emission ±2.95dB This uncertainty represent an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 20 0f 22

REPORT No.：SZ18080155W01 Annex B Testing Laboratory Information 1. Identification of the Responsible Testing Laboratory Company Name: Shenzhen Morlab Communications Technology Co., Ltd. Department: Morlab Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Responsible Test Lab Mr. Su Feng Manager: Telephone: +86 755 36698555 Facsimile: +86 755 36698525 2. Identification of the Responsible Testing Location Shenzhen Morlab Communications Technology Co., Ltd. Name: Morlab Laboratory FL.3, Building A, FeiYang Science Park, No.8 LongChang Address: Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China 3. Facilities and Accreditations All measurement facilities used to collect the measurement data are located at FL.3, Building A, FeiYang Science Park, Block 67, BaoAn District, Shenzhen, 518101 P. R. China. The test site is constructed in conformance with the requirements of ANSI C63.10-2013 and CISPR Publication 22; the FCC designation number is CN1192, the test firm registration number is 226174. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 21 0f 22

REPORT No.：SZ18080155W01 4. Test Equipments Utilized 4.4 Radiated Test Equipments Equipment Serial No. Type Manufacturer Cal. Date Cal. Due Name Receiver MY54130016 N9038A Agilent 2018.08.04 2019.08.03 Test Antenna - 9163-519 VULB 9163 Schwarzbeck 2018.05.18 2019.05.17 Bi-Log Test Antenna - 1519-022 FMZB1519 Schwarzbeck 2018.03.03 2019.03.02 Loop Test Antenna – 01774 BBHA 9120D Schwarzbeck 2018.08.06 2019.08.05 Horn Test Antenna – BBHA9170 BBHA9170 Schwarzbeck 2018.08.02 2019.08.01 Horn #774 Coaxial cable (N male) CB04 EMC04 Morlab N/A N/A (9KHz-30MHz) Coaxial cable (N male) CB02 EMC02 Morlab N/A N/A (30MHz-26GHz) Coaxial cable (N male) CB03 EMC03 Morlab N/A N/A (30MHz-26GHz) 1-18GHz Rohde& MA02 TS-PR18 2018.05.08 2019.05.07 pre-Amplifier Schwarz 18-26.5GHz Rohde& MA03 TS-PR18 2018.05.08 2019.05.07 pre-Amplifier Schwarz Anechoic N/A 9m*6m*6m CRT 2017.11.19 2020.11.18 Chamber END OF REPORT MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 22 0f 22


Document Created: 2019-09-18 13:00:06
Document Modified: 2019-09-18 13:00:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC