Users Manual

FCC ID: 2AOCRGS-SB204

Users Manual

Download: PDF
FCCID_4260511

Model#GS-SB204 SoundBar

User manual & Safety Guide Thank you for choosing GS-SB204. We hope you enjoy each and every use of this product. We suggest that you read this user manual carefully before primary use in order to utilize all of the features in functions installed. Please store it in a safe place for future reference and pass it on to the next owner. Features: Bluetooth - stream and enjoy music wirelessly from any Bluetooth enabled device. 2.0Ch Surround Sound Bar - full range true cinematic surround sound. Easy Setup – Line In Mode、TF Card Mode, simply do it yourself plug and play connection will have you all setup in minutes. Main Chart of Panel

Connections Bluetooth Connection To pair the BT- Speaker with your Smartphone or other Bluetooth enabled device hit mode to enter Bluetooth mode. Enable the Bluetooth function on your Smartphone or other Bluetooth enabled device and hit scan for BT- Speaker. When found choose it from the list. If prompted to input a password insert 0000, once successfully paired, select the BT- Speaker from the list of paired devices and select in order to connect. Line In Use the provided AUX cable (3.5mm) to directly connect Smartphones, tablets, and other music devices. Its corresponding signal source is LINE IN which can be available by Pressing (mode) on the panel. TF CARD Input Insert the TF card into the device, and then you can enjoy music. Its corresponding signal source is TF CARD Mode which can be available by pressing (mode) on the panel. Instructions of Indicator Light -FAST BLINKING BLUE LIGHT Pairing mode looking for Bluetooth device. -BLUE SOLID LIGHT

Device successfully paired. -BLINKING BLUE LIGHT  Bluetooth play. -SOLID GREEN LIGHT AND BLINKING BLUE LIGHT TF CARD Mode. -GREEN SOLID LIGHT Line IN Mode. - RED SOLID LIGHT Charging state. - RED LIGHT GOES OUT Charging completion. Troubleshooting Issue Possible Causes Solution No sound or distorted 1. Battery power shortage 1. To charge the device sound 2.The volume is set to the 2.Turn up the Volume minimum level. The buttons on the unit Battery without electricity To charge the device are not working or the device didn't respond The buttons on the unit Due to unstable voltage or Press the reset button. are not working and improper use. As shown below:From the side panel insert the Indicator light work. item less than 3.5mm and press the reset button SPECIFICATIONS Power input DC5V Battery capacity 1500MA

Power consumption 7W Speaker size 2 inch Number of speakers 2 Vibrating Diaphragm 1 Cabinet material ABS Plastic (Crack resistant) Sound bar dimensions 42.8*5.5*6.5CM

FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body: Use only the supplied antenna.


Document Created: 2019-04-30 15:34:56
Document Modified: 2019-04-30 15:34:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC