User manual

FCC ID: 2ANBQ-BE7

Users Manual

Download: PDF
FCCID_4495503

ITFIT BE7 manual_aw Size: 70.5mm(w) x 90mm(h) 2019 AUG 01 Bluetooth Pairing Quick Start Guide Wireless Earphone Model : BE7 1.Press and hold the “O” button for about 5 seconds to power on and put the earphone into paring mode. Specification: 2.The LED indicator will flash red and blue alternately. Bluetooth Version : 5.0 WIRELESS SPORTS EARPHONES Effective Range : 10m 3.Open the Bluetooth settings on your mobile device and search for nearby Bluetooth devices. Frequency response : 8Hz~20kHz Impedance : 32 Ohm 4.Locate and select “BE7” entry from the list. When Battery : 90mAh pairing is successful, the LED will flash blue every 5 Non-stop working time : Up to 6 hours Power seconds. (Note that if the earphone will remember the Charging time : Approx. 2 hours button Energy Saving mode : Auto power off last device it was paired with and will automatically “O” Dimensions : 49 x 47mm earbud, reconnect whenever it is in range.) 500mm cord length Volume Press & hold Weight : 19g button “ + ” / “-” for about 5 secs. Contains: 1. 1 x Wireless Earphone 2. Removable ear tips (3 pairs): Small / Middle (installed on Earphone) / Large 3. 1 x Micro USB charging cable 4. Instruction Manual Instruction Manual Removable ear tip Copyright @ 2019 ITFIT All rights reserved FCC WARNING Instruction for use How to charge This device complies with part 15 of the FCC Rules. Operation is Function Action LED Indicator 1. Open the charger port cover. subject to the following two conditions: (1) this device may not Turn the earphone ON Press and hold “O” for about 2 seconds Blue LED flashes for 1 second 2. Connect the headset to USB power adaptor via Micro cause harmful interference, and (2) this device must accept any Turn the earphone OFF Press and hold “O” for about 4 seconds Red LED flashes for 1 second interference received, including interference that may cause USB cable. undesired operation. Bluetooth connection Press and hold “O” for about 5 seconds Blue & Red LED flashes alternately (First time to pair with mobile device) 3. The LED indicator will glow RED when charging. Any changes or modifications not expressly approved by the party 4. The LED indicator will glow BLUE when the battery is full. responsible for compliance Bluetooth connection Press and hold “O” for about 2 seconds Blue LED flashes quickly & reconnects could void the user's authority to operate the equipment. (Reconnected to mobile device after paired) automatically 5. When the battery is low NOTE: This equipment has been tested and found to comply with Play or pause Music Press and hold “O” for about 1 second Standby mode: Working mode: the limits for a Class B digital device, pursuant to Part 15 of the Volume up Short pressing “+” The LED indicator will The LED indicator will flash FCC Rules. These limits are designed to provide reasonable Volume down Short pressing “–” flash RED once every RED every 5 seconds. protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio Skip forward Long pressing “+” second. frequency energy and, if not installed and used in accordance with Skip backward Long pressing “–” the instructions, may cause harmful interference to radio Pick up a call Press “O” communications. However, there is no guarantee that interference Reject the call Press and hold “O” for about 1 second will not occur in a particular installation. during the call When an incoming call Blue LED flashes once every 5 If this equipment does cause harmful interference to radio or seconds television reception, Terminate the call Press “O” which can be determined by turning the equipment off and on, the Switch device during the call* Press and hold “O” for about 1 second user is encouraged to try to correct the interference by one or more during the call of the following measures: Switch caller in a call Short press “O” -- Reorient or relocate the receiving antenna. (Terminate current call)* -- Increase the separation between the equipment and receiver. Switch caller in a call Press “O” twice -- Connect the equipment into an outlet on a circuit different (Pause & Hold current call)* from that to which the receiver is connected. Disposal of Electronic Products Switch caller in a call Press “O” twice Micro USB cable -- Consult the dealer or an experienced radio/TV technician for (Switch back the on-hold call)* 1. Do not place the product as household waste; help. 2. Please dispose of discarded electronic products properly Keep current caller & Reject a new coming call* Press and hold “O” for about 1 second The device has been evaluated to meet general RF exposure requir according to local regulations. * Depending on whether the mobile device supports this feature ement. The device can be used in portable 3. Please participate in electronics recycling program. FCC ID: 2ANBQ-BE7 exposure condition without restriction


Document Created: 2019-10-30 10:30:11
Document Modified: 2019-10-30 10:30:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC