User Manual

FCC ID: 2AMH2-BH333A

Users Manual

Download: PDF
FCCID_4449801

G Initial use Function 2、Touch key function Charge the earphone Mobile phone emergency charging Warning Detail information Charging box information Put the earphones in the charging box. The earphone The charging box of this product has mobile power Size: 26mm(L)*20mm(W)*25 mm(H) Size: 70*40*34 mm weight:47 g 1、Turn on/off function and USB standard interface, it can provide about The correct way of wearing: User Manual starts charging when the earphone is green. When Weight: 4.23 g Charge port: Micro USB 1.Take out the two earphones, tear the earphone is full of electricity, the lights are out. 30% of the power of mobile phone emergency charge. Place earphones in the ear and gently rotate until 45 degrees Charging current: 40 mA Charge times( with full current state): 5 times Taking out the earphone from the charging box, it above (as shown below), at the same time the earphone Charging time: about 2 h off the insulation sticker, and then Charging time: about 1 hour will turn on automatically. It charges automatically Batter y level without falling. The wrong way to wear will affect the Working voltage: 3.3 V-4.2V put the earphones into the when put it into the charging box. It will earphone signal and microphone calls. Security instructions WIRELESS IN-EAR EARBUDS charging box again. automatically turn off, If the earphone takes out the Earphones can let you know the power level. When the battery lasts only 5 minutes, every 100 seconds you will Standby time: around 40 hours Listening music time: 2-2.5 hours To avoid hearing loss, please keeping the volume at an appropriate level. charging box and can't find the phone after 10 hear the "insufficient power, please charge". Talking time: 3 hours Avoid listening to music at high volume for long time, minutes, and then it need to put back into the Support for profile: HSP, HFP, A2DP, AVRCP which can cause permanent hearing damage or hearing Touch the earphone and Touching the earphone 2.Turn on automatically when charging box to wake up. Indicator lamp RF emission frequency: class 2 loss. answer directly means pausing / playing Please do not use the earphone when you are driving, Transmission categor y(GHz ): 2.402 GHz -2.48GHz taking out the earphones( Usually Touch button"MFB" when the calling income, when we listen to music Charging Finish Green lamp Lights out Advanced operation Transmission distance: 10 m riding and crossing the street. the left side is the main engine) Pairing Green and blue light flickering 1.Disconnect the left and right earphone Note: If you are using headphones to watch a video, the Audio sampling accuracy: 16 bits Connected Lights out audio settings may be out of sync When we need to use the left and right headphones Audio sampling rate: up to 96 kHz Led indicator light separately on the two mobile phones.Firstly, disconnect the Audio coding format: CVSD, mSBC, SBC, AAC Charge for charging box left and right headphones, put the headphones in the Noise-signal ratio:＞ 95 dB charging box, and touch the headphone 3 times, when the Put the charging wire into the charger interface to charge led lamp flicker twice, it indicates that the headphone Working temperature: -15℃~60℃ 3.The left side earphone will get the charging box and the earphone. During charging, the interconnection has been successfully unconnected. Working wet: 10%~85%( Non-freezing state) into the Bluetooth model. And it charge box indicator lights up. Secondly, take the headphone out the charging box, the left and right headphones will enter the matching mode of "DE will show the green and blue lights Double touch means a When listening to the song, long 01 R" and "DE 01 L" respectively, so we can pair the left and right headphones separately with two phones. Headphone horn information: flicker alternately( the right side touch the right earphone to Blue 75-100% Specification: Φ6 mm lights out) refusal to answer a call enter the next song, long touch the left earphone to enter the 2.Connect the left and right earphone The wrong way of wearing: Impedance: 16 Ω/typ previous song Frequency(Hz): 20 HZ~20 KHz Restore the left and right headphones. Firstly, turn on the green blue 35-75% phone and find Bluetooth, delete "DE 01 R" and "DE 01 L" in Sensitivity: 93±3 dB 4.Turn on Bluetooth on your my device. Secondly, removing the earphone from the Input power : 2mW~5mW cellphone or other electrical charging box, waiting for 3-5 seconds after the green and DE_01 L products, find out the “DE 01”, Green 0-35% blue lights flash, and long touch buttons for 3-5 seconds, after that they will enter the two headphones interconnect Microphone information and then click on and link . And it is state. At this time only blue lights flicker, wait 3-5 seconds M/C style: silicon microphone after the right headphone lights off, left earphone green and M/C sensitivity: -42±3dB Please pull the charging wire out after finish charging, successful when you hear a voice Electric quantity diagram which is in order to avoid the products in the long Charging connector blue led lamp flash, it indicates that interconnection is SPL: 130 dB say “ Connected”. successful. Finally, turn on the phone Bluetooth, refreshing charging state. Waking up standby player the device, and find "DE01 L" and click it. 5V/1A or 5V/1.5A is the best choice for the charger. But if Double touching wakes Note: If attempt to remove or replace the batter y, it the output voltage and current of the charger exceed the by touching products Note: This operation is only for users. And please repeating up Siri would damage the product and invalidate its multiple times if the pairing is unsuccessful. specified value, the product will be seriously damaged warranty and the warranty period will be invalid. -9- - 10- -11- -12- -13- -14- -15- -16- FCC Statement Reorient or relocate the receiving antenna. Increase the separation between the equipment and Operation is subject to the following three conditions: receiver. (1) This device may not cause harmful interference, and Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (2) This device must accept any interference received, including interference that may cause undesired Consult the dealer or an experienced radio/TV operation. technician for help. (3) This device has been evaluated to meet general RF Any Changes or modifications not expressly approved by exposure requirement. The device can be used in the party responsible for compliance could void the portable exposure condition without restriction. user’s authority to operate the equipment. NOTE： This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -17- -18-


Document Created: 2019-09-19 06:17:33
Document Modified: 2019-09-19 06:17:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC