User Manual

FCC ID: 2ALNA-ICBTS30

Users Manual

Download: PDF
FCCID_3810506

Safety Precautions Specifications What's in the Box Overview Buttons & Indicators Connections Portable Wireless Speaker Avoid dropping the speaker on the floor. Bluetooth version: V4.2 Do not try to disassemble or repair the speaker Bluetooth profile: A2DP, AVRCP, HFP, HSP Wireless Audio to Amplify Your Life! unless you are a technician. Driver: 2 x Φ45mm, 2 x Passive radiator Do not submerge the speaker in water. Output power: 2 x 12W Micro USB Cable Charging Never expose the speaker to extreme high or low Signal-to-noise ratio ≥ 80dB Volume + Button Power Button & Indicator AUX-IN temperatures. Frequency response: 70-20KHz Stop use immediately if thunderstorm happens. Battery: 3.7V/5200mAh Battery level Indicator Bluetooth Pairing MFB Button Bluetooth Button WIRELESS SPEAKER XBOOM Do not clean its surface with any corrosive cleanser Music play time: Up to 20 hours (varies by volume Wireless Audio to Amplify Your Life! XBASS Button & Indicator Volume - Button or other chemical solutions. level and music files) AUX-IN Port Charging time: 4 hours @ 5V/2A Charging Port 2 Dimensions (H x W x D): 68 x 180 x 68 mm /2.68 x USER MANUAL IC-BTS30 Bluetooth ON Tribit XBOOM 7.09 x 2.68 in USER MANUAL Weight: 545g /19.2oz User Manual 1 3 Wireless Daisy Chain with Two XBooms Step2: Pair/Connect the Speaker A Step3: Enjoy music with two XBooms Function Button Operation Indicators Reset Pair a Bluetooth Bluetooth Press the button to manually Indicator Status Step 1：Connect the Speaker A and B Device Button enter pairing mode If this speaker has any problem, you can try to press and Volume Up Volume + Press the button to increase Blue indicator flashes slowly Reconnection mode hold Volume + and Volume - buttons simultaneously for the volume level Power indicator Blue indicator flashes quickly Bluetooth pairing mode 5s to reset this speaker and remove the old pairing in Volume Down Volume - Press the button to decrease Blue indicator keeps sturdily on Connected the volume level your Bluetooth device, and then pair again. >5s XBASS White indicator lights up Bass mode is activated Play/pause MFB Press once the button indicator Customer Service Next track MFB Double press the button Four white indicators light up Remaining battery Tribit XBOOM Previous track MFB Press the button for 3 times power: 71% ~ 100% 18-month limited warranty Tribit XBOOM answer/end the MFB Press once the button Battery Three white indicators light up Remaining battery incoming call For FAQS and more information, please visit: indicator power: 51% ~ 70% Reject an MFB Press and hold the button for Email: support@tribitaudio.com Speaker A Speaker B Two white indicators light up Remaining battery Buttons incoming call 2s power: 26% ~ 50% www.tribitaudio.com Speaker A Voice dial MFB Press and hold the button for Keep Speaker A and B power on One white indicator lights up Remaining battery Function Button Operation function 2s to activate (your device must power: 10% ~ 25% Press the Bluetooth button on Speaker A at least 5s till the Note: Same as normal Bluetooth pairing Power ON/OFF Power Button Press the button to turn support this function) tone comes up A red indicator lights up Low battery power on/off the speaker XBASS XBASS Press the button to switch (<10%), Please recharge Wait for the Speaker A and B connecting success with tone Bass and normal mode the speaker. FCC Statement try to correct the interference by one or more of the following measures: Changes or modifications not expressly approved by the party Reorient or relocate the receiving antenna. responsible for compliance could void the user's authority to Increase the separation between the equipment and receiver. operate the equipment. Connect the equipment into an outlet on a circuit different This equipment has been tested and found to comply with the from that to which the receiver is connected. limits for a Class B digital device, pursuant to Part 15 of the Consult the dealer or an experienced radio/TV technician for FCC Rules. These limits are designed to provide reasonable help. protection against harmful interference in a residential installation. This equipment generates uses and can radiate This device complies with part 15 of the FCC rules. Operation radio frequency energy and, if not installed and used in is subject to the following two conditions: accordance with the instructions, may cause harmful (1) This device may not cause harmful interference. interference to radio communications. However, there is no (2) This device must accept any interference received, guarantee that interference will not occur in a particular including interference that may cause undesired operation. installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to


Document Created: 2018-02-27 11:34:36
Document Modified: 2018-02-27 11:34:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC