Test Report

FCC ID: 2AKSK-Z0711

Test Report

Download: PDF
FCCID_3255376

Page 1 of 25 Report No.: HK1601223075-E FCC TEST REPORT Test report On Behalf of Guangzhou AiXun Electronics Technology Co., Ltd. For Bluetooth Selfie Stick Model No.: Z07-11 FCC ID: 2AKSK-Z0711 Prepared for : Guangzhou AiXun Electronics Technology Co., Ltd. 5th Floor, Building C, Shachong Industrial Area, NO. 613, Huawan Road, Liwan District, Guangzhou, Guangdong Province, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. F1-008, Tai Yi Building, No.1, Haicheng West Road, Xixiang Street, Bao'an District, Shenzhen City, China Date of Test: Dec. 23, 2016 ~ Dec. 29, 2016 Date of Report: Dec. 30, 2016 Report Number: HK1601223075-E

Page 2 of 25 Report No.: HK1601223075-E TEST RESULT CERTIFICATION Applicant’s name ................. : Guangzhou AiXun Electronics Technology Co., Ltd. 5th Floor, Building C, Shachong Industrial Area, NO. 613, Address ................................. : Huawan Road, Liwan District, Guangzhou, Guangdong Province, China Manufacture's Name ............ : Guangzhou AiXun Electronics Technology Co., Ltd. 5th Floor, Building C, Shachong Industrial Area, NO. 613, Address ................................. : Huawan Road, Liwan District, Guangzhou, Guangdong Province, China Product description Trade Mark: N/A Product name ........................... : Bluetooth Selfie Stick Model and/or type reference : Z07-11 FCC Rules and Regulations Part 15 Subpart C Section 15.249 Standards ............................. : ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : Dec. 23, 2016 ~ Dec. 29, 2016 Date of Issue ........................................... : Dec. 30, 2016 Test Result ............................................... : Pass Testing Engineer : (Eric Xie) Technical Manager : (Dora Qin) Authorized Signatory : (Kait Chen)

Page 3 of 25 Report No.: HK1601223075-E Table of Contents Page 1 . TEST SUMMARY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 Operation of EUT during testing 6 2.2 DESCRIPTION OF TEST SETUP 6 2.3 MEASUREMENT INSTRUMENTS LIST 7 3. CONDUCTED EMISSIONS TEST 8 3.1 Conducted Power Line Emission Limit 8 3.2 Test Setup 8 3.3 Test Procedure 8 3.4 Test Result 8 4 RADIATED EMISSION TEST 11 4.1 Radiation Limit 11 4.2 Test Setup 11 4.3 Test Procedure 12 4.4 Test Result 12 5 BAND EDGE 18 5.1 Limits 18 5.2 Test Procedure 18 5.3 Test Result 18 6 OCCUPIED BANDWIDTH MEASUREMENT 20 6.1 Test Setup 20 6.2 Test Procedure 20 6.3 Measurement Equipment Used 20 6.4 Test Result 20 7 ANTENNA REQUIREMENT 23 8 PHOTOGRAPH OF TEST 24 8.1 Radiated Emission 24 8.2 Conducted Emission 25

Page 4 of 25 Report No.: HK1601223075-E 1. TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS DESCRIPTION OF TEST RESULT CONDUCTED EMISSIONS TEST COMPLIANT RADIATED EMISSION TEST COMPLIANT BAND EDGE COMPLIANT OCCUPIED BANDWIDTH MEASUREMENT COMPLIANT ANTENNA REQUIREMENT COMPLIANT 1.2 TEST FACILITY Test Firm : Dongguan Dongdian Testing Service Co., Ltd Certificated by FCC, Registration No.: 270092 Address : No.17 Zongbu road 2, Songshan Lake Sci&Tech Park, DongGuan City, Guangdong province,523808 China 1.3 MEASUREMENT UNCERTAINTY Measurement Uncertainty Conducted Emission Expanded Uncertainty = 2.23dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.08dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz) = 4.42dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.06dB, k=2

Page 5 of 25 Report No.: HK1601223075-E 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Bluetooth Selfie Stick Model Name Z07-11 Serial No N/A Model Difference N/A FCC ID 2AKSK-Z0711 Antenna Type PCB Antenna Antenna Gain 0dBi Operation frequency Bluetooth 4.0: 2402-2480MHz Number of Channels 40CH Modulation Type GFSK Power Source N/A DC 3.7V from battery or Power Rating DC 5V from adapter

Page 6 of 25 Report No.: HK1601223075-E 2.1.1 Carrier Frequency of Channels Channel List Frequency Frequency Frequency Frequency Channel (MHz) Channel (MHz) Channel (MHz) Channel (MHz) 01 2402 11 2422 21 2442 31 2462 02 2404 12 2424 22 2444 32 2464 03 2406 13 2426 23 2446 33 2466 04 2408 14 2428 24 2448 34 2468 05 2410 15 2430 25 2450 35 2470 06 2412 16 2432 26 2452 36 2472 07 2414 17 2434 27 2454 37 2474 08 2416 18 2436 28 2456 38 2476 09 2418 19 2438 29 2458 39 2478 10 2420 20 2440 30 2460 40 2480 Operation of EUT during testing Operating Mode The mode is used: Transmitting mode for BT Low Channel: 2402MHz Middle Channel: 2440MHz High Channel: 2480MHz 2.2 DESCRIPTION OF TEST SETUP Operation of EUT during conducted testing: Adapter EUT Operation of EUT during Radiation testing: EUT

Page 7 of 25 Report No.: HK1601223075-E 2.3 MEASUREMENT INSTRUMENTS LIST Item Equipment Manufacturer Model No. Serial No. Last Cal. Cal. Interval 1. EMI Receiver Rohde & Schwarz ESCI 100627 Feb. 19, 2016 1 Year 2. LISN SchwarzBeck NSLK 8126 8126377 Feb. 19, 2016 1 Year 3. RF Switching Unit Compliance RSU-M2 38303 Feb. 19, 2016 1 Year Direction 4. EMI Test Software Rohde & Schwarz N/A N/A N/A N/A ES-K1 5. EMI Test Receiver Rohde & Schwarz ESCI 100627 Feb. 19, 2016 1 Year 6. Trilog Broadband Schwarzbeck VULB9163 VULB 1 Year Feb. 19, 2016 Antenna 9163-289 7. Pre-amplifier Compliance PAP-0203 22008 Feb. 19, 2016 1 Year Direction 8. EMI Test Software SHURPLE N/A N/A N/A N/A EZ-EMC 9. EMI Receiver Rohde & Schwarz ESCI 100627 Feb. 19, 2016 1 Year 10. LISN SchwarzBeck NSLK 8126 8126377 Feb. 19, 2016 1 Year 11. RF Switching Unit Compliance RSU-M2 38303 Feb. 19, 2016 1 Year Direction 12. EMI Test Software Rohde & Schwarz N/A N/A N/A N/A ES-K1 13. EMI Receiver Rohde & Schwarz ESCI 100627 Feb. 19, 2016 1 Year 14. EMI Receiver Rohde & Schwarz ESCI 100627 Feb. 19, 2016 1 Year 15. LISN SchwarzBeck NSLK 8126 8126377 Feb. 19, 2016 1 Year 16. RF Switching Unit Compliance RSU-M2 38303 Feb. 19, 2016 1 Year Direction 17. EMI Test Software Rohde & Schwarz N/A N/A N/A N/A ES-K1 18. Power Meter R&S NRVD SEL0069 Feb. 19, 2016 1 Year 19. Power Sensor R&S URV5-Z2 SEL0071 Feb. 19, 2016 1 Year 20. Power Sensor R&S URV5-Z2 SEL0072 Feb. 19, 2016 1 Year 21. Software R&S SEL0082 N/A N/A EMC32-S EMC32 22. Log-periodic Amplifier SEL0073 N/A AZ07-1180 N/A Antenna Reasearch 23. Antenna Tripod Amplifier SEL0074 N/A N/A TP1000A Reasearch 24. High Gain Horn Amplifier SEL0075 N/A AT4002A N/A Antenna(0.8-5GHz) Reasearch 25. MY499110 1 Year Spectrum analyzer Agilent N9020A Feb. 19, 2016 048 26. Spectrum Analyzer R&S FSP SEL0177 Feb. 19, 2016 1 Year 27. Spectrum analyzer MY461843 1 Year Agilent E4407B Feb. 19, 2016 26 28. Audio Analyzer R&S SEL0136 Feb. 19, 2016 1 Year UPL

Page 8 of 25 Report No.: HK1601223075-E 3. CONDUCTED EMISSIONS TEST 3.1 Conducted Power Line Emission Limit For unintentional device, according to § 15.107(a) Line Conducted Emission Limits is as following * Decreasing linearly with the logarithm of the frequency For intentional device, according to §15.207(a) Line Conducted Emission Limit is same as above table. 3.2 Test Setup 3.3 Test Procedure 1, The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. The EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10. 2, Support equipment, if needed, was placed as per ANSI C63.10. 3, All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4, If a EUT received DC power from the USB Port of Notebook PC, the PC’s adapter received AC120V/60Hz power through a Line Impedance Stabilization Network (LISN) which supplied power source and was grounded to the ground plane. 5, All support equipments received AC power from a second LISN, if any. 6, The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7, Analyzer / Receiver scanned from 150 KHz to 30MHz for emissions in each of the test modes. 3.4 Test Result PASS All the test modes completed for test.

, Level(aBun an 70 e ~Eemscl.. ree parpis 8 or — 7\ so ~——L s ECC PARIMS B AV *——_| 30 frrosent— Lo M ~L 4 Mnpnbatthovottct 20 m obaohennAjomcemtenlemtzantes 10 4s 2 $ 2 5 10 20 30 Frequency (MHz) Item Freq. Read LISN Cable Pulse Result Limit Over Detector Phase Level Factor Loss Limiter Level Line Limit Factor at) oun CBuy) & GB ESn CBayn C ES 1 0183 ol 5o1 .02 556 33.00 Si2¢ 212% Averaze LNE 2 0.183 20.65 oT .02 556 4014 612¢ 2110 oP LNE i 0227 us 561 .02 55e 326 s37 BCEH Averaze LNE i 0227 20.48 551 .02 556 ECE a57 2260 oP LNE 5 6279 625 S$1 .02 556 $2% 5085 18 i1 Averaze LNE 6 0279 20.00 251 .02 256 3958 60.55 2127 oP LINE 7 0415 1BJ9 $s1 0.02 986 328 47.55 1427 Average LNE $ 413 2056 561 602 55e 40.07 s13 1748 oP LNE 8 .75 130 Se1 .05 5se 3280 16.00 4320 Averaze LNE 10 3 Se1 0.03 956 3743 36.00 —18.57 oP LNE it 1216 10.04 $62 .03 EES 2655 16.00 1645 Average LNE 12 1216 15.82 962 0.03 986 3533 56.00 2067 QP LNE Note: 1. Result Level = Read Level +LISN Factor + Pulse Limiter Factor + Cable loss TEQP Result complies with AVlimit, AV Result is deemed to comply with AVlimit 3. Test setup: RBW: 200 Hz (9 kHz—150 kHz), 9 kHz (150 kHz—30 MHz) 4. Step size: 80OHz (0.009MHz—0.15MHz), 4 kHz (0.1SMHz—30MHz), Scan time: auto

& Level (dBuW) 90 80 70 FCC PART1S B aP 60 ECC PARIMS B AV 50 ao) A WMMM P [ * Peessane.—_|—""PMmaddedabinipryriiapanaticmnr—Winek 20 &'M Arovk o~Aermnammonhitnman 10 7 s 20 30 Frequency (MHz) Tem Freq. Rend LISN Cable Pube Roult Limit Ove Detector FPhase Level Factor Loss |Limiter Level Line Limit Factor (Mai) MB CBut) CB) CB) CB) CBat) Gbay (B) I 02%0 Bs oe on ase mor 3e user Aene Neumar 7 0o Tosy Ser ons bie es ae ns or Neomar 6 037 1st ser ons ose 3246 3112 1866 Averge NEUTRAL 7 Cen Top Ser on 5se Gear sn is or neumar 7 ol To3o Ser oos Sss Tes i5 30 is ~| Avemge NeumaL s on 2ows aer ons ose ess1 saso co> or yeursar 7 0332 5e _Ser ons Sse 33e 3600 T14 Avenge NEURGTL 3 o5z 250| sei ons ose anso seoo |zo or Neurrar 5 7 o3 se ons |_ase s 4600 nB Aense NEvmur d o7 ser ons Sse 372| seoo as73 or Nevrrar L oe os on ase oose 1em Aese Aves: NEVIRAL T Tess ser ons Sse Sss 3eoo on or Neomar Note: 1. Result Level = Read Level +LISN Factor + Pulse Limiter Factor + Cable loss 2. If QP Result complies with AV limit, AV Result is deemed to complywith AVlimit. 3. Test setup: RBW: 200 Hz (0 kHz—150 kHz), 9 kHz (150 kHz—30 MHz) 4. Step size: SOHz (0.009MHz—0.15MHz), 4 kHz (0.1 SMHz—30MHz), Scan time: auto

Page 11 of 25 Report No.: HK1601223075-E 4 RADIATED EMISSION TEST 4.1 Radiation Limit For unintentional device, according to § 15.109(a), except for Class A digital devices, the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values： Frequency Distance Radiated Radiated (MHz) (Meters) (dBμV/m) (μV/m) 30-88 3 40 100 88-216 3 43.5 150 216-960 3 46 200 Above 960 3 54 500 For intentional device, according to § 15.209(a), the general requirement of field strength of radiated emissions from intentional radiators at a distance of 3 meters shall not exceed the above table. 4.2 Test Setup （1）Radiated Emission Test-Up Frequency Below 30MHz （2）Radiated Emission Test-Up Frequency 30MHz~1GHz

Page 12 of 25 Report No.: HK1601223075-E （3）Radiated Emission Test-Up Frequency Above 1GHz 4.3 Test Procedure 1. Below 1GHz measurement the EUT is placed on turntable which is 0.1m above ground plane. And above 1GHz measurement EUT was placed on low permittivity and low tangent turn table which is 1.5m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Repeat above procedures until the measurements for all frequencies are complete. 7. The test frequency range from 9KHz to 25GHz per FCC PART 15.33(a). Note: For battery operated equipment, the equipment tests shall be performed using a new battery. 4.4 Test Result PASS All the test modes completed for test. The worst case of Radiated Emission; the test data of this mode was reported.

Page 13 of 25 Report No.: HK1601223075-E Below 1GHz Test Results: Antenna polarity: H

Page 14 of 25 Report No.: HK1601223075-E Antenna polarity: V Remark： (1) Measuring frequencies from 9 KHz to the 1 GHz, Radiated emission test from 9KHz to 30MHz was verified, and no any emission was found except system noise floor. (2) * denotes emission frequency which appearing within the Restricted Bands specified in provision of 15.205, then the general radiated emission limits in 15.209 apply. (3) The IF bandwidth of EMI Test Receiver between 30MHz to 1GHz was 120KHz, 1 MHz for measuring above 1 GHz, below 30MHz was 10KHz.

Page 15 of 25 Report No.: HK1601223075-E Above 1 GHz Test Results: CH Low (2402MHz) Horizontal: Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2402 113.28 -5.84 107.44 114 -6.56 peak 2402 85.25 -5.84 79.41 94 -14.59 AVG 4804 56.75 -3.64 53.11 74 -20.89 peak 4804 45.28 -3.64 41.64 54 -12.36 AVG 7206 54.67 -0.95 53.72 74 -20.28 peak 7206 39.63 -0.95 38.68 54 -15.32 AVG --- --- --- --- --- --- --- --- --- --- --- --- --- --- Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Vertical: Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2402 110.27 -5.84 104.43 114 -9.57 peak 2402 85.34 -5.84 79.50 94 -14.50 AVG 4804 57.28 -3.64 53.64 74 -20.36 peak 4804 44.13 -3.64 40.49 54 -13.51 AVG 7206 54.32 -0.95 53.37 74 -20.63 peak 7206 38.63 -0.95 37.68 54 -16.32 AVG --- --- --- --- --- --- --- --- --- --- --- --- --- --- Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier.

Page 16 of 25 Report No.: HK1601223075-E CH Middle (2440MHz) Horizontal: Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2440 109.74 -5.71 104.03 114 -9.97 peak 2440 84.63 -5.71 78.92 94 -15.08 AVG 4880 57.73 -3.51 54.22 74 -19.78 peak 4880 45.38 -3.51 41.87 54 -12.13 AVG 7320 53.52 -0.82 52.70 74 -21.30 peak 7320 36.37 -0.82 35.55 54 -18.45 AVG --- --- --- --- --- --- --- --- --- --- --- --- --- --- Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Vertical: Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2440 108.28 -5.71 102.57 114 -11.43 peak 2440 83.62 -5.71 77.91 94 -16.09 AVG 4880 57.34 -3.51 53.83 74 -20.17 peak 4880 43.39 -3.51 39.88 54 -14.12 AVG 7320 54.27 -0.82 53.45 74 -20.55 peak 7320 39.31 -0.82 38.49 54 -15.51 AVG --- --- --- --- --- --- --- --- --- --- --- --- --- --- Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier.

Page 17 of 25 Report No.: HK1601223075-E CH High (2480MHz) Horizontal: Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2480 108.53 -5.65 102.88 114 -11.12 peak 2480 84.18 -5.65 78.53 94 -15.47 AVG 4960 56.45 -3.43 53.02 74 -20.98 peak 4960 44.34 -3.43 40.91 54 -13.09 AVG 7440 51.42 -0.75 50.67 74 -23.33 peak 7440 39.84 -0.75 39.09 54 -14.91 AVG --- --- --- --- --- --- --- --- --- --- --- --- --- --- Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Vertical: Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2480 107.26 -5.65 101.61 114 -12.39 peak 2480 82.12 -5.65 76.47 94 -17.53 AVG 4960 56.17 -3.43 52.74 74 -21.26 peak 4960 44.38 -3.43 40.95 54 -13.05 AVG 7440 53.52 -0.75 52.77 74 -21.23 peak 7440 38.46 -0.75 37.71 54 -16.29 AVG --- --- --- --- --- --- --- --- --- --- --- --- --- --- Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Remark： (1) Measuring frequencies from 1 GHz to the 25 GHz。 (2) “F” denotes fundamental frequency; “H” denotes spurious frequency. “E” denotes band edge frequency. (3) * denotes emission frequency which appearing within the Restricted Bands specified in provision of 15.205, then the general radiated emission limits in 15.209 apply. (4) Data of measurement within this frequency range shown “--- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. (5) The IF bandwidth of EMI Test Receiver between 30MHz to 1GHz was 120KHz, 1 MHz for measuring above 1 GHz, below 30MHz was 10KHz. (6) When the test results of Peak Detected below the limits of Average Detected, the Average Detected is not need completed. For example: Top Channel at Fundamental 73.16dBuV/m(PK Value) <93.98(AV Limit), at harmonic 53.20 dBuV/m(PK Value) <54 dBuV/m(AV Limit), the Average Detected not need to completed.

Page 18 of 25 Report No.: HK1601223075-E 5 BAND EDGE 5.1 Limits FCC PART 15.249(d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. 5.2 Test Procedure The band edge compliance of RF radiated emission should be measured by following the guidance in ANSI C63.10 with respect to maximizing the emission by rotating the EUT, measuring the emission while the EUT is situated in three orthogonal planes (if appropriate), adjusting the measurement antenna height and polarization etc. Set RBW to 100KHz and VBM to 300KHz to measure the peak field strength and set RBW to 1MHz and VBW to 10Hz to measure the average radiated field strength.The conducted RF band edge was measured by using a spectrum analyzer. Set span wide enough to capture the highest in-band emission and the emission at the band edge. Set RBW to 100 KHz and VBW to 300 KHz, to measure the conducted peak band edge. 5.3 Test Result PASS Radiated Band Edge Test: Operation Mode: TX CH Low (2402MHz) Horizontal Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2390 53.63 -5.81 47.82 74 -26.18 peak 2390 / -5.81 / 54 / AVG 2400 56.28 -5.84 50.44 74 -23.56 peak 2400 / -5.84 / 54 / AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Vertical: Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2390 51.83 -5.81 46.02 74 -27.98 peak 2390 / -5.81 / 54 / AVG 2400 56.49 -5.84 50.65 74 -23.35 peak 2400 / -5.84 / 54 / AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier.

Page 19 of 25 Report No.: HK1601223075-E Operation Mode: TX CH High (2480MHz) Horizontal Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2483.5 53.24 -5.65 47.59 74 -26.41 peak 2483.5 / -5.65 / 54 / AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Vertical: Emission Frequency Meter Reading Factor Limits Margin Level Detector Type (MHz) (dBμV) (dB) (dBμV/m) (dBμV/m) (dB) 2483.5 53.18 -5.65 47.53 74 -26.47 peak 2483.5 / -5.65 / 54 / AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Remark: All the other emissions not reported were too low to read and deemed to comply with FCC limit.

Page 20 of 25 Report No.: HK1601223075-E 6 OCCUPIED BANDWIDTH MEASUREMENT 6.1 Test Setup Same as Radiated Emission Measurement 6.2 Test Procedure 1. The EUT was placed on a turn table which is 0.8m above ground plane. 2. Set EUT as normal operation. 3. Based on FCC Part15 C Section 15.249(a): RBW= 100KHz. VBW= 300 KHz, Span=3MHz. 4. The useful radiated emission from the EUT was detected by the spectrum analyser with peak detector. 6.3 Measurement Equipment Used Same as Radiated Emission Measurement 6.4 Test Result PASS 20dB Bandwidth Frequency Result (KHz) 2402 MHz 1215 PASS 2440 MHz 1215 PASS 2480 MHz 1225 PASS

Page 21 of 25 Report No.: HK1601223075-E CH: 2402MHz

Page 22 of 25 Report No.: HK1601223075-E CH: 2440MHz CH: 2480MHz

Page 23 of 25 Report No.: HK1601223075-E 7 ANTENNA REQUIREMENT Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. And according to FCC 47 CFR Section 15.249, if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. Refer to statement below for compliance. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. Further, this requirement does not apply to intentional radiators that must be professionally installed. Antenna Connected Construction The antenna used in this product is a PCB Antenna for Bluetooth, The directional gains of antenna used for transmitting is 0dBi. Bluetooth ANTENNA

Page 24 of 25 Report No.: HK1601223075-E 8 PHOTOGRAPH OF TEST 8.1 Radiated Emission



Document Created: 2017-01-06 18:03:56
Document Modified: 2017-01-06 18:03:56
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC