Test Report

FCC ID: 2AKILBX050

Test Report

Download: PDF
FCCID_3254701

Certification Test Report FCC ID: 2AKILBX050 IC: 22194-BX050 FCC Rule Part: 15.247 ISED Canada Radio Standards Specification: RSS-247 ACS Report Number: 16-2074.W06.1A Applicant: Creed Monarch, Inc. Model(s): BX050 Test Begin Date: November 22, 2016 Test End Date: November 28, 2016 Report Issue Date: January 3, 2017 FOR THE SCOPE OF ACCREDITATION UNDER CERTIFICATE NUMBER AT-1533 This report must not be used by the client to claim product certification, approval, or endorsement by ANAB, ANSI, or any agency of the Federal Government. Prepared by: Reviewed by: Thierry Jean-Charles Ryan McGann EMC Engineer Wireless Program Manager Advanced Compliance Solutions, Inc. Advanced Compliance Solutions, Inc. This test report shall not be reproduced except in full. This report may be reproduced in part with prior written consent of ACS, Inc. The results contained in this report are representative of the sample(s) submitted for evaluation. This report contains 20 pages 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587

TABLE OF CONTENTS 1 GENERAL ...........................................................................................................3 1.1 Purpose ............................................................................................................................................ 3 1.2 Applicant Information ........................................................................................................................ 3 1.3 Product Description .......................................................................................................................... 3 1.4 Test Methodology and Considerations ............................................................................................. 3 2 TEST FACILITIES ...............................................................................................4 2.1 Location ............................................................................................................................................ 4 2.2 Laboratory Accreditations/Recognitions/Certifications ...................................................................... 4 2.3 Radiated & Conducted Emissions Test Site Description .................................................................. 5 2.3.1 Semi-Anechoic Chamber Test Site ............................................................................................. 5 2.3.2 Conducted Emissions Test Site Description ................................................................................ 6 3 APPLICABLE STANDARD REFERENCES ........................................................ 7 4 LIST OF TEST EQUIPMENT ...............................................................................8 5 SUPPORT EQUIPMENT .....................................................................................9 6 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM .................................... 9 7 SUMMARY OF TESTS ...................................................................................... 10 7.1 Antenna Requirement – FCC: Section 15.203 .................................................................................10 7.2 6 dB Bandwidth - FCC: Section 15.247(a)(2); ISED Canada: RSS-247 5.2(1); 99% Bandwidth ISED Canada: RSS-GEN 6.6 ....................................................................................................................10 7.2.1 Measurement Procedure ............................................................................................................10 7.2.2 Measurement Results ................................................................................................................10 7.3 Peak Output Power - FCC Section 15.247(b)(3); ISED Canada: RSS-247 5.4(4) ...........................12 7.3.1 Measurement Procedure (Conducted Method) ..........................................................................12 7.3.2 Measurement Results ................................................................................................................12 7.4 Band-Edge and Spurious Emissions ...............................................................................................13 7.4.1 Band-Edge Compliance of RF Conducted Emissions - FCC Section 15.247(d); ISED Canada: RSS-247 5.5 ...............................................................................................................................13 7.4.1.1 Measurement Procedure ........................................................................................................13 7.4.1.2 Measurement Results ............................................................................................................13 7.4.2 RF Conducted Spurious Emissions - FCC Section 15.247(d); ISED Canada: RSS-247 5.5 ......15 7.4.2.1 Measurement Procedure ........................................................................................................15 7.4.2.2 Measurement Results ............................................................................................................15 7.4.3 Radiated Spurious Emissions into Restricted Frequency Bands – FCC Sections 15.205, 15.209; ISED Canada: RSS-Gen 8.9, 8.10 .............................................................................................16 7.4.3.1 Measurement Procedure ........................................................................................................16 7.4.3.2 Duty Cycle Correction ............................................................................................................16 7.4.3.3 Measurement Results ............................................................................................................16 7.4.3.4 Sample Calculation: ...............................................................................................................18 7.5 Power Spectral Density - FCC Section 15.247(e); ISED Canada: RSS-247 5.2(2) .........................19 7.5.1 PSD Measurement Procedure (Conducted Method) ..................................................................19 7.5.2 Measurement Results ................................................................................................................19 8 CONCLUSION .................................................................................................. 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 1 GENERAL 1.1 Purpose The purpose of this report is to demonstrate compliance with Part 15 Subpart C of the FCC’s Code of Federal Regulations and Innovation, Science and Economic Development Canada’s Radio Standards Specification RSS-247 for the tests documented herein. 1.2 Applicant Information Creed Monarch, Inc. P O Box 550 New Britain, CT 06050 USA 1.3 Product Description The Creed Monarch, Inc. Patriot II remote model BX050 is a 12Volt RV battery powered Remote for RV supplemental Brake. Remote unit is coupled to Brake unit residing in towed car with two-way RF radio link. The equipment operates in the 900 MHz ISM band. The device also includes a 433 MHz Tire Pressure Monitor System receiver. Technical Details Mode of Operation: LoRa Frequency Range: 922.4 MHz Number of Channels: 1 Channel Separation: N/A Modulations: CSS Antenna Type/Gain: Helical SMD Antenna/ 0.8 dBi Input Power: 12 VDC Model Number: BX050 Test Sample Serial Number(s): ACS#2 Test Sample Condition: The equipment was provided in good condition without any physical damage. 1.4 Test Methodology and Considerations The 922.4 MHz LoRa transceiver was evaluated for radiated and RF conducted emissions. The test power setting is not provided and is not configurable via software. The EUT is for vehicle implementation only with no provision for connection to the AC Mains. The EUT is exempted from the power line conducted emissions requirements. For the emissions evaluation, the EUT set in three orthogonal orientations while powered by a DC power supply. The RF conducted emissions evaluation was performed on a sample modified with an SMA connector at the antenna port. The EUT was also investigated for unintentional emissions. The results are documented separately in a verification test report. ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 3 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 2 TEST FACILITIES 2.1 Location The radiated and conducted emissions test sites are located at the following address: Advanced Compliance Solutions, Inc. 3998 FAU Blvd, Suite 310 Boca Raton, Florida 33431 Phone: (561) 961-5585 Fax: (561) 961-5587 www.acstestlab.com FCC Test Firm Registration #: 475089 Innovation, Science and Economic Development Canada Lab Code: 4175C 2.2 Laboratory Accreditations/Recognitions/Certifications ACS is accredited to ISO/IEC 17025 by ANSI-ASQ National Accreditation Board under their ANAB program and has been issued certificate number AT-1533 in recognition of this accreditation. Unless otherwise specified, all test methods described within this report are covered under the ISO/IEC 17025 scope of accreditation. ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 4 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 2.3 Radiated & Conducted Emissions Test Site Description 2.3.1 Semi-Anechoic Chamber Test Site The EMC radiated test facility consists of an RF-shielded enclosure. The interior dimensions of the indoor semi-anechoic chamber are approximately 48 feet (14.6 m) long by 36 feet (10.8 m) wide by 24 feet (7.3 m) high and consist of rigid, 1/8 inch (0.32 cm) steel-clad, wood core modular panels with steel framing. In the shielded enclosure, the faces of the panels are galvanized and the chamber is self-supporting. 8- foot RF absorbing cones are installed on 4 walls and the ceiling. The steel-clad ground plane is covered with vinyl flooring. The turntable is driven by pneumatic motor, which is capable of supporting a 2000 lb. load. The turntable is flush with the chamber floor which it is connected to, around its circumference, with a continuous metallic loaded spring. An EMCO Model 1060 Multi-device controller controls the turntable position. A pneumatic motor is used to control antenna polarizations and height relative to the ground. The height information is displayed on the control unit EMCO Model 1050. The control room is an RF shielded enclosure attached to the semi-anechoic chamber with two bulkhead panels for connecting RF, and control cables. The dimension of the room is 7.3 m x 4.9 m x 3 m high and the entrance doors of both control and conducted rooms are 3 feet (0.91 m) by 7 feet (2.13 m). A diagram of the Semi-Anechoic Chamber Test Site is shown in Figure 2.3.1-1 below: 3m 8m 14.78m Control Room 4.9m 4.9m Conducted EMI Site 7.33m 7.33m Figure 2.3.1-1: Semi-Anechoic Chamber Test Site ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 5 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 2.3.2 Conducted Emissions Test Site Description 3 The dimensions of the shielded conducted room are 7.3 x 4.9 x 3 m . The power line conducted emission site includes two LISNs: a Solar Model 8028-50 50 Ω/50 μH and an EMCO Model 3825/2R, which are installed as shown in the figure below. For evaluations requiring 230 V, 50 Hz AC input, a Polarad LISN (S/N 879341/048) is used in conjunction with a California Instruments signal generator Model 2001RP- OP1. A diagram of the room is shown below in figure 2.3.2-1: LISN 4.9m\16ft 1.0m x 1.5m Non-Conductive Table LISN 7.33m\24ft. Figure 2.3.2-1: AC Mains Conducted EMI Site ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 6 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 3 APPLICABLE STANDARD REFERENCES The following standards were used:  ANSI C63.4-2014: Method of Measurements of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the 9 kHz to 40 GHz.  ANSI C63.10-2013: American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices  US Code of Federal Regulations (CFR): Title 47, Part 2, Subpart J: Equipment Authorization Procedures, 2016.  US Code of Federal Regulations (CFR): Title 47, Part 15, Subpart C: Radio Frequency Devices, Intentional Radiators, 2016  FCC KDB 558074 D01 DTS Meas Guidance v03r05 - Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247, April 8, 2016.  Innovation, Science and Economic Development Canada Radio Standards Specification: RSS- 247 — Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence- Exempt Local Area Network (LE-LAN) Devices, Issue 1, May 2015.  Innovation, Science and Economic Development Canada Radio Standards Specification: RSS- GEN – General Requirements for Compliance of Radio Apparatus, Issue 4, November 2014. ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 7 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 4 LIST OF TEST EQUIPMENT The calibration interval of test equipment is annually or the manufacturer’s recommendations. Where the calibration interval deviates from the annual cycle based on the instrument manufacturer’s recommendations, it shall be stated below. Table 4-1: Test Equipment List Calibration AssetID Manufacturer Model # Equipment Type Serial # Last Calibration Date Due Date 22 Agilent 8449B Amplifiers 3008A00526 7/14/2016 7/14/2018 78 EMCO 6502 Antennas 9104-2608 5/11/2016 5/11/2018 283 Rohde & Schwarz FSP40 Spectrum Analyzers 1000033 7/21/2016 7/21/2018 523 Agilent E7405 Spectrum Analyzers MY45103293 12/26/2014 12/26/2016 2002 EMCO 3108 Antennas 2147 11/19/2015 11/19/2017 2004 EMCO 3146 Antennas 1385 11/19/2015 11/19/2017 2006 EMCO 3115 Antennas 2573 4/14/2015 4/14/2017 2011 Hewlett-Packard HP 8447D Amplifiers 2443A03952 11/2/2016 11/2/2017 2071 Trilithic, Inc. 4HC1400-1-KK Filter 9643263 11/1/2016 11/1/2017 2086 Merrimac FAN-6-10K Attenuators 23148-83-1 11/2/2016 11/2/2017 2095 ETS Lindgren TILE4! - Version 4.2.A Software 85242 NCR NCR 2111 Aeroflex Inmet 40AH2W-20 Attenuator 2111 7/20/2016 7/20/2017 2112 Teledyne Storm Products 921-0101-036 Cables 12-06-698 11/2/2016 11/2/2017 2121 ACS Boca Radiated Cable Set Cable Set 2121 8/1/2016 8/1/2017 Note: NCR=No Calibration Required ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 8 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 5 SUPPORT EQUIPMENT Table 5-1: EUT and Support Equipment Description Item Type Device Manufacturer Model/Part # Serial # # 1 EUT Creed Monarch BX050 ACS#2 2 Cigarette Lighter Plug Creed Monarch N/A ACS#3 3 DC Power Supply MPJA HY5003 003700278 Table 5-2: Cable Description Cable Cable Type Length Shield Termination # A Power cable 3m No EUT to Cigarette Lighter Plug B 2-Wire Power Leads 1.95 m No Cigarette Lighter Plug to Power Supply C MPJA Power Cable 1.8 m No Power Supply to AC Mains 6 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM AC Mains C 3 B A 1 2 Figure 6-1: EUT Test Setup ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 9 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 7 SUMMARY OF TESTS Along with the tabular data shown below, plots were taken of all signals deemed important enough to document. 7.1 Antenna Requirement – FCC: Section 15.203 The EUT uses an integral 0.8 dBi helical SMD antenna which is directly soldered to the PCB. The antennan is not removable and therefore meets the requirements of FCC Section 15.203. 7.2 6 dB Bandwidth - FCC: Section 15.247(a)(2); ISED Canada: RSS-247 5.2(1); 99% Bandwidth ISED Canada: RSS-GEN 6.6 7.2.1 Measurement Procedure The 6dB bandwidth was measured in accordance with the FCC KDB 558074 D01 DTS Meas Guidance v03r05 Section 8.2 Option 2. The RBW of the spectrum analyzer was set to 100 kHz and VBW 300 kHz. Span was set large enough to capture the emissions and >> RBW. The 99% occupied bandwidth was measured with the spectrum analyzer span set to fully display the emission. The RBW was set to 1% to 5% of the approximated bandwidth. The occupied 99% bandwidth was measured by using 99% bandwidth equipment function of the spectrum analyzer. 7.2.2 Measurement Results Results are shown below. Table 7.2.2-1: 6dB / 99% Bandwidth Frequency 6dB Bandwidth 99% Bandwidth [MHz] [kHz] [kHz] 922.4 762.00 616.00 ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 10 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 *RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 7.69 dBm Ref 20 dBm Att 30 dB SWT 2.5 ms 922.348000000 MHz 20 Offset 20.4 dB ndB [T1] 6.00 dB BW 762.000000000 kHz 10 1 Temp 1 [T1 ndB] A 1.80 dBm 1 PK T1 T2 MAXH 922.008000000 MHz 0 Temp 2 [T1 ndB] LVL 1.59 dBm 922.770000000 MHz -10 -20 -30 3DB -40 -50 -60 -70 -80 Center 922.4 MHz 100 kHz/ Span 1 MHz Date: 22.NOV.2016 13:27:38 Figure 7.2.2-1: 6dB BW *RBW 10 kHz Marker 1 [T1 ] VBW 30 kHz 3.96 dBm Ref 20 dBm Att 20 dB SWT 20 ms 922.572000000 MHz 20 Offset 20.4 dB OBW616.000000000 kHz Temp 1 [T1 OBW] 10 -10.51 dBm A 1 922.084000000 MHz 1 SA* MAXH 0 Temp 2 [T1 OBW] -7.42 dBm LVL T2 922.700000000 MHz T1 -10 -20 -30 3DB -40 -50 -60 -70 -80 Center 922.4 MHz 200 kHz/ Span 2 MHz Date: 22.NOV.2016 13:40:09 Figure 7.2.2-2: 99% OBW ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 11 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 7.3 Peak Output Power - FCC Section 15.247(b)(3); ISED Canada: RSS-247 5.4(4) 7.3.1 Measurement Procedure (Conducted Method) The fundamental emission output power was measured in accordance with the FCC KDB 558074 D01 DTS Meas Guidance v03r05 Section 9.1.1 RBW ≥ DTS bandwidth. The RF output of the equipment under test was directly connected to the input of the spectrum analyzer through suitable attenuation. 7.3.2 Measurement Results Results are shown below. Table 7.3.2-1: RF Output Power Frequency Level [MHz] [dBm] 922.4 7.92 *RBW 3 MHz Marker 1 [T1 ] VBW 10 MHz 7.92 dBm Ref 20 dBm Att 30 dB SWT 2.5 ms 922.180000000 MHz 20 Offset 20.4 dB 10 1 A 1 PK MAXH 0 LVL -10 -20 -30 3DB -40 -50 -60 -70 -80 Center 922.4 MHz 1 MHz/ Span 10 MHz Date: 22.NOV.2016 13:33:28 Figure 7.3.2-1: RF Output Power ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 12 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 7.4 Band-Edge and Spurious Emissions 7.4.1 Band-Edge Compliance of RF Conducted Emissions - FCC Section 15.247(d); ISED Canada: RSS-247 5.5 7.4.1.1 Measurement Procedure The RF output port of the EUT was directly connected to the input of the spectrum analyzer via suitable attenuation. The EUT was investigated at the transmitting channel to determine band-edge compliance. For each measurement the spectrum analyzer’s RBW was set to 100 kHz, and the VBW was set to 300 kHz. 7.4.1.2 Measurement Results Results are shown below. *RBW 100 kHz Delta 1 [T1 ] VBW 300 kHz 50.31 dB Ref 20 dBm Att 30 dB SWT 2.5 ms 22.100000000 MHz 20 Offset 20.4 dB Marker 1 [T1 ] -42.05 dBm 10 900.100001 0000 MHz A D1 7.68 dBm 1 PK MAXH 0 LVL -10 D2 -12.32 dBm -20 -30 3DB 1-40 -50 -60 -70 F1 -80 Start 900 MHz 2.5 MHz/ Stop 925 MHz Date: 26.NOV.2016 19:29:59 Figure 7.4.1.2-1: Lower Band-edge ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 13 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 *RBW 100 kHz Delta 1 [T1 ] VBW 300 kHz 49.74 dB Ref 20 dBm Att 30 dB SWT 2.5 ms -7.660000000 MHz 20 Offset 20.4 dB Marker 1 [T1 ] -42.13 dBm 10 1 929.920000000 MHz A D1 7.68 dBm 1 PK MAXH 0 LVL -10 D2 -12.32 dBm -20 -30 3DB -40 1 -50 -60 -70 F1 -80 Start 920 MHz 1 MHz/ Stop 930 MHz Date: 26.NOV.2016 19:31:25 Figure 7.4.1.2-2: Upper Band-edge ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 14 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 7.4.2 RF Conducted Spurious Emissions - FCC Section 15.247(d); ISED Canada: RSS-247 5.5 7.4.2.1 Measurement Procedure The RF Conducted Spurious Emissions were measured in accordance with the FCC KDB 558074 D01 DTS Meas Guidance v03r05 Section 11.3 Emission level measurement. The RF output port of the equipment under test was directly connected to the input of the spectrum analyzer. The EUT was investigated for conducted spurious emissions from 30MHz to 10 GHz, 10 times the highest fundamental frequency. The spectrum analyzer’s RBW was set to 100 kHz and the VBW was set to 300 kHz. The peak Max Hold function of the analyzer was utilized. The reference level was determined by measuring the Peak PSD level in any 100 kHz bandwidth within the DTS channel bandwidth. 7.4.2.2 Measurement Results Results are shown below. *RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 7.94 dBm Ref 20 dBm *Att 30 dB SWT 1 s 922.315000000 MHz 20 Marker 2 [T1 ] -25.40 dBm 10 1 9.355688750 GHz A D1 7.68 dBm 1 PK MAXH 0 TDF -10 D2 -12.32 dBm -20 2 -30 3DB -40 -50 -60 -70 -80 Start 30 MHz 997 MHz/ Stop 10 GHz Date: 22.NOV.2016 13:45:04 Figure 7.4.2.2-1: 30 MHz – 10 GHz ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 15 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 7.4.3 Radiated Spurious Emissions into Restricted Frequency Bands – FCC Sections 15.205, 15.209; ISED Canada: RSS-Gen 8.9, 8.10 7.4.3.1 Measurement Procedure Radiated emissions tests were made over the frequency range of 9 kHz to 10 GHz, 10 times the highest fundamental frequency. Each emission found to be in a restricted band as defined by section 15.205, including any emission at the operational band-edge, was compared to the radiated emission limits as defined in Section 15.209. For measurements below 30 MHz, the receive antenna height was set to 1m and the EUT was rotated through 360 degrees. The resolution bandwidth was set to 200 Hz below 150 kHz and to 9 kHz above 150 kHz. The EUT was rotated through 360° and the receive antenna height was varied from 1m to 4m so that the maximum radiated emissions level would be detected. For frequencies below 1000MHz, quasi-peak measurements were made using a resolution bandwidth RBW of 120 kHz and a video bandwidth VBW of 300 kHz. For frequencies above 1000 MHz, peak measurements are made with RBW of 1 MHz and VBW of 3 MHz. Average measurements are performed in the linear scale using VBW of 30 Hz. 7.4.3.2 Duty Cycle Correction The average measurements were further corrected using a duty cycle correction factor corresponding to 20*log(14/100) = -17.08 dB. Justification for the duty cycle of the transceiver is provided in the Theory of Operation of the device. 7.4.3.3 Measurement Results Radiated band-edge and spurious emissions found in the restricted frequency bands of 9 kHz to 10 GHz are reported in the tables below. ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 16 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 Table 7.4.3.3-1: Radiated Spurious Emissions Tabulated Data Level Antenna Correction Corrected Level Limit Margin Frequency (dBuV) Polarity Factors (dBuV/m) (dBuV/m) (dB) (MHz) pk Qpk/Avg (H/V) (dB) pk Qpk/Avg pk Qpk/Avg pk Qpk/Avg Flat 2767.2 55.61 50.29 H 1.79 57.40 35.00 74.0 54.0 16.6 19.0 2767.2 52.53 46.76 V 1.79 54.32 31.47 74.0 54.0 19.7 22.5 3689.6 49.68 41.89 H 5.29 54.97 30.10 74.0 54.0 19.0 23.9 3689.6 48.14 39.88 V 5.29 53.43 28.09 74.0 54.0 20.6 25.9 4612 49.90 40.31 H 7.06 56.96 30.30 74.0 54.0 17.0 23.7 4612 48.76 39.38 V 7.06 55.82 29.37 74.0 54.0 18.2 24.6 7379.2 58.61 47.03 H 12.96 71.57 42.91 74.0 54.0 2.4 11.1 7379.2 59.86 48.29 V 12.96 72.82 44.17 74.0 54.0 1.2 9.8 8301.6 54.20 41.61 H 13.63 67.83 38.16 74.0 54.0 6.2 15.8 8301.6 53.39 40.75 V 13.63 67.02 37.30 74.0 54.0 7.0 16.7 Standing 2767.2 54.71 50.23 H 1.79 56.50 34.94 74.0 54.0 17.5 19.1 2767.2 50.00 44.96 V 1.79 51.79 29.67 74.0 54.0 22.2 24.3 3689.6 49.93 43.76 H 5.29 55.22 31.97 74.0 54.0 18.8 22.0 3689.6 47.35 40.59 V 5.29 52.64 28.80 74.0 54.0 21.4 25.2 4612 46.36 37.57 H 7.06 53.42 27.56 74.0 54.0 20.6 26.4 4612 49.70 43.21 V 7.06 56.76 33.20 74.0 54.0 17.2 20.8 7379.2 55.39 46.70 H 12.96 68.35 42.58 74.0 54.0 5.7 11.4 7379.2 55.05 46.18 V 12.96 68.01 42.06 74.0 54.0 6.0 11.9 8301.6 49.81 39.16 H 13.63 63.44 35.71 74.0 54.0 10.6 18.3 8301.6 53.24 43.50 V 13.63 66.87 40.05 74.0 54.0 7.1 13.9 Side 2767.2 52.60 46.83 H 1.79 54.39 31.54 74.0 54.0 19.6 22.5 2767.2 52.85 47.53 V 1.79 54.64 32.24 74.0 54.0 19.4 21.8 3689.6 46.63 37.04 H 5.29 51.92 25.25 74.0 54.0 22.1 28.7 3689.6 49.81 41.78 V 5.29 55.10 29.99 74.0 54.0 18.9 24.0 4612 48.78 39.11 H 7.06 55.84 29.10 74.0 54.0 18.2 24.9 4612 48.83 39.22 V 7.06 55.89 29.21 74.0 54.0 18.1 24.8 7379.2 56.25 44.24 H 12.96 69.21 40.12 74.0 54.0 4.8 13.9 7379.2 59.52 47.72 V 12.96 72.48 43.60 74.0 54.0 1.5 10.4 8301.6 52.53 39.78 H 13.63 66.16 36.33 74.0 54.0 7.8 17.7 8301.6 54.13 41.16 V 13.63 67.76 37.71 74.0 54.0 6.2 16.3 Notes: All the emissions above 8.31 GHz were attenuated below the limits and the noise floor of the measurement equipment. A duty cycle correction factor of -17.08 dB was used for the calculation of the corrected average levels. ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 17 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 7.4.3.4 Sample Calculation: RC = RU + CFT Where: CFT = Total Correction Factor (AF+CA+AG)-DC (Average Measurements Only) RU = Uncorrected Reading RC = Corrected Level AF = Antenna Factor CA = Cable Attenuation AG = Amplifier Gain DC = Duty Cycle Correction Factor Example Calculation: Peak Corrected Level: 55.61+ 1.79 = 57.4 dBµV/m Margin: 74 dBµV/m – 57.4 dBµV/m = 16.6 dB Example Calculation: Average Corrected Level: 50.29 + 1.79 - 17.08 = 35.0 dBµV/m Margin: 54 dBµV/m – 35.0 dBµV/m = 19.0 dB ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 18 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 7.5 Power Spectral Density - FCC Section 15.247(e); ISED Canada: RSS-247 5.2(2) 7.5.1 PSD Measurement Procedure (Conducted Method) The power spectral density was measured in accordance with the FCC KDB 558074 D01 DTS Meas Guidance v03r05 Section 10.2 Method PKPSD (peak PSD). The RF output port of the EUT was directly connected to the input of the spectrum analyzer. Offset values were input for cable and external attenuation. The spectrum analyzer RBW was set to 3 kHz and VBW 10 kHz. Span was adjusted to 1.5 times the 6 dB bandwidth and the sweep time was set to auto. 7.5.2 Measurement Results Results are shown below. Table 7.5.2-1: Power Spectral Density Frequency PSD Limit Margin [MHz] [dBm] [dBm] [dB] 922.4 -4.66 8.0 12.66 *RBW 3 kHz Marker 1 [T1 ] VBW 10 kHz -4.66 dBm Ref 20 dBm Att 30 dB SWT 130 ms 922.576022000 MHz 20 Offset 20.4 dB 10 A 1 PK MAXH 0 1 LVL -10 -20 -30 3DB -40 -50 -60 -70 -80 Center 922.4 MHz 114.3 kHz/ Span 1.143 MHz Date: 22.NOV.2016 13:31:37 Figure 7.5.2-1: Power Spectral Density ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 19 of 20

Model(s): BX050 FCC ID: 2AKILBX050 IC: 22194-BX050 8 CONCLUSION In the opinion of ACS, Inc., the model BX050 manufactured by Creed Monarch, Inc. meets the requirements of FCC Part 15 subpart C and Innovation, Science and Economic Development Canada’s Radio Standards Specification RSS-247 for the test procedures documented in the test report. END REPORT ACS Report: 16-2074.W06.1A Advanced Compliance Solutions Page 20 of 20


Document Created: 2017-12-20 17:06:35
Document Modified: 2017-12-20 17:06:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC