User Manual

FCC ID: 2AJTU-S6

Users Manual

Download: PDF
FCCID_4353449

The instruction manual Of S6 external radio Chapter1.Product introduction S6 radio is a new intelligent external radio station newly developed by Southern Satellite Navigation. It has the advantages of superior performance, comprehensive functions and easy operation. Especially on the issue of serial frequency of the radio, the S6 radio has built in up to 10 radio protocols and 120 radio channels. Thoroughly solve the unnecessary troubles brought about by the work for the customer. In the characteristics of the wireless use function, the radio and the host can wirelessly transmit data and wirelessly control the radio. The radio station has added a background webpage function, and the operation is simpler and more user-friendly. Chapter2.Product appearance and accessories 1. The introduction of product appearance Display screen Radio hook Indicator light Cool fin button Radio front view Rear view of the station

Bluetooth Data light Power lamp Power light Liquid crystal display Power switch, confirmation Up, down, left, right selection keys b tt return key Transmitting antenna interface Power cord interface (4 pins) Data line interface (5 pins) Product nameplate 2. The introduction of Radio accessories：

Radio power cord (4-pin interface) Radio data cable (5-pin interface) Radio transmitting antenna Chapter3. Radio display interface and function introduction The first display interface: satellite receiver system initialization information interface. The second display interface: the radio quick setting interface. The above listed radio channel information, the radio channel can be adjusted by pressing the direction selection button and the down button. The following listed radio power information, the radio power can be adjusted by left and right key. Press the enter key to switch to the next screen.

The third display interface: interface of adjusting the radio channel The fourth display interface: the above listed adjusts the radio power. L represents low power. M represents medium power. H repenesents high power. The following is the tuner protocol interface. (This interface press the confirm button to enter the page turning interface) The fifth display interface: the above listed is Bluetooth switch . The following is Bluetooth mode: Slave mode and Master mode. The sixth display interface: the above listed is WIFI switch. The following is WIFI mode ：AP hotspot and CLI client mode interface

The seventh display interface: the above listed is the resets radio factory setting. The following is restarted key. (Please press the enter key after selecting the relevant information to modify the station information) The eighth display interface: radio body number interface The 9th display interface: the radio background webpage login IP interface The 10th display interface: the above listed is host temperature and the following is radio amplifier temperature interface The 11th display interface: radio firmware version interface

The 12th display interface: Whether to perform the close radio interface (press and hold the power off button for 3 seconds to put this meeting to display this message, press "Confirm" to turn off the radio) The 13th display interface: the radio interface is being closed. Chapter 3.The introduction of radio website: 1. Login page Connect the radio WIFI hotspot, open the web page, enter the radio backstage webpage IP 10.1.1.1 will pop up the login account interface below, enter the account admin password admin to enter the login. (Users are free to choose electronic products to log in) Radio page as shown below

2 Web page function and usage introduction 2.1 Host status = system information + working status (only displays information and status when no setting function) as shown below. 2.2 Host configuration = host control (settable function) as shown below Function: 1. Motherboard 2. Radio 3. Network 4. WiFi 5. Bluetooth 6. Sensor 7. EEPROM Start self-test can be a single self-test or all self-test, clear satellite ephemeris. Restore factory settings. Restart the host. Turn off the host.

2.3 Data transmission = serial port setting (settable function) as shown below Function: Baud Rate. Parity. Data Stream. Enabled. (LEMO Wired Transmission Settings. BLUETOOTH Wireless Transmission Settings) 2.4 Network Settings = WIFI Settings + Bluetooth Settings + Port Mapping (Settable Functions) as shown below


2.5 Radio settings = radio parameters + radio frequency (settable function)





2.6 Firmware upgrade = firmware upgrade + upgrade module (settable function) as shown below 2.7 User Management = User Management (Settable Functions) as shown below

Chapter4. Radio wireless data transmission and control radio station introduction The wireless connection of radio and RTK. The Bluetooth of the handbook is connected to the host to set the base station plug-in mode and starts successfully. The handbook disconnects the Bluetooth connection to the radio wifi and enters the radio page 10.1.1.1 for related operation settings. (account and password are admin) The steps of Web page seting 1.1 Open Web Page > Radio Settings > Radio Parameters > Data Source (Set to Bluetooth) > OK. 1.2 Data Transmission > Serial Port Settings > BLUETOOTH > Baud Rate (corresponding to RTB Host Serial Port Baud Rate) > Parity > Data Flow > Enable (Select) > OK. (Note: LEMO is the setting when using the data cable) Serial port settings generally do not need special settings, keep the default (as shown below) 1.3 Network Settings > Bluetooth Settings > Advanced Settings > Main Mode (Select Main Mode) > Search Bluetooth > Please select (Select Base Station RTK Host Bluetooth) > OK. (Please restart the radio after switching the Bluetooth working mode. If the restart is not restarted, the setting will not be successful.)

2. Wireless control of S6 radio: 2.1 Connect the S6 radio wifi with mobile phones, handbooks and other Internet-connected electronic products (make sure the radio wifi hotspot is turned on before connecting) 2.2 Enter the dedicated web page 10.1.1.1 (account admin. password admin), select the radio settings to wirelessly control the S6 radio. Chapter5. The radio parameters of S6 Radio characteristics Support agreement SOUTH 9600/SOUTH 19200/SOUTH+ SOUTHx/TrimTalk 450S/TrimMark II TrimMark III/HUACE Hi-Target/Satel 3AS Power RF output power: 10W, 20W, 30W Frequency Range 410MHz - 470MHz Bandwidth 25KHz baud rate 9600/19200 Number of channels 120 Use interaction Boot mode Button boot Operation method Button / Bluetooth software / WIFI webpage Display VFD vacuum LCD screen Button 6 buttons, up and down keys switch, left and right button selection, power button confirmation / switch button, C button return Indicator light 4 indicators, BT Bluetooth light / DATA data light AUX power lamp / PWR power lamp Internal WIFI 802.11b/g/n, Support AP hotspots communication Bluetooth Bluetooth 3.0 Interface information Dataline interface Standard RS232 serial port, LEMO 5 core Antenna interface Standard TNC mouthpiece Power interface Power supply four core LEMO Physical Operating temperature -20℃-55℃ characteristics storage temperature -40℃-85℃ Dustproof and waterproof IP67 Drop withstands 1.2m free drop onto hard surface Size 144mm*174mm*65.6mm Weight 1.5 KG

Wireless connection of support base station Antenna status monitoring support System characteristics Real-time temperature support monitoring Power dynamic adjustment support power input DC 9-16V Electrical characteristics Reverse polarity support ESD protection support

FCC Warning FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The PMR antenna(s) used for this transmitter must be installed and operated operating to provide a separation distance of at least 5m from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installer must ensure that 100cm separation distance will be maintained between the device (excluding its handset) and users. Caution: The user is cautioned that changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operate the equipment.


Document Created: 2019-07-08 19:24:44
Document Modified: 2019-07-08 19:24:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC