User manual part 1

FCC ID: 2AJOTTA-1184

Users Manual

Download: PDF
FCCID_4246014

Get Started Nokia X Camera Flash Front camera Earpiece Google Assistant/ Google Search key* USB connector Microphone Loudspeaker Volume keys Power/Lock key *Google Assistant is available in selected markets and languages. Where not TA-1184/TA-1179 EN-US-CA available, Google Assistant is replaced by Google Search. 1. Insert the SIM and memory Tip: To remove the SIM card, slide the lever to the left. card 1. With the phone facing down, put your fingernail in the slot on the side of the phone, bend the back cover open, and remove it. 2. Slide the nano-SIM in slot 1 with the contact area face down. If you have a second SIM, slide it in slot 2. Use only original nano-SIM cards. Use of incompati- ble SIM cards may damage the card or the device, and may corrupt data stored on the card. 3. If you have a microSD memory card, slide the card in the memory card slot. 2. Charge the battery and switch the Use only compatible memory cards approved for phone on use with this device. Incompatible cards may dam- age the card and the device and corrupt data stored Plug a compatible charger into a wall outlet, and connect the cable to your phone. Your phone sup- on the card. ports the USB micro-B cable. You can also charge your phone from a computer with a USB cable, but Important: Do not remove the memory card it may take a longer time. when an app is using it. Doing so may damage the If the battery is completely discharged, it may take memory card and the device and corrupt data several minutes before the charging indicator is dis- stored on the card. played. To switch your phone on, press and hold the power Note: Switch the device off and disconnect the key until the phone vibrates. The phone guides you charger and any other device before removing any through the setup. covers. Avoid touching electronic components while changing any covers. Always store and use the device with any covers attached. Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable. For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support.

Product and safety info exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The Innovation, Science and Economic Development Canada (ISED) CAN ICES-3(B)/NMB-3(B) Important: For important info on the safe use of your device and SAR limit set by the FCC is 1.6 W/kg. The tests are performed in battery, read the Product and safety info booklet before you take positions and locations (e.g. at the ear and worn on the body) as Canadian Notice your device into use. required by the FCC for each model. The highest SAR value for this This device complies with Industry Canada license-exempt RSS You can only use your device on the GSM 850, 900, 1800, 1900; handset model as reported to the FCC when tested for use at the ear standard(s). Operation is subject to the following two conditions: WCDMA 1, 2, 4, 5, 8; LTE 1, 2, 3, 4, 5, 7, 8, 12, 17, 28 networks. is 0.48 W/kg, and when worn on the body in a holder or carry case, is (1) this device may not cause interference, and You need a subscription with a service provider. 1.43 W/kg. (2) this device must accept any interference, including interference Important: 4G/LTE might not be supported by your network Body-worn Operation; This device was tested for typical body-worn that may cause undesired operation of the device. service provider or by the service provider you are using when operations with the handset kept 1.0 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that Caution: Exposure to Radio Frequency Radiation traveling. In these cases, you may not be able to make or receive calls, send or receive messages or use mobile data connections. To maintain a 1.0 cm separation distance between the user’s body and 1.To comply with the Canadian RF exposure compliance make sure your device works seamlessly when full 4G/LTE service is the handset. The use of belt clips, holsters and similar accessories requirements, this device and its antenna must not be co-located or not available, it is recommended that you change the highest should not contain metallic components in its assembly. The use of operating in conjunction with any other antenna or transmitter. connection speed from 4G to 3G. To do this, on the home screen, tap accessories that do not satisfy these requirements may not comply 2.To comply with RSS 102 RF exposure compliance requirements, a Settings > Network & Internet > Mobile network > Advanced, and with FCC RF exposure requirements, and should be avoided. The FCC separation distance of at least xx cm must be maintained between switch Preferred network type to 3G. has granted an Equipment Authorization for this handset model with the antenna of this device and all persons. all reported SAR levels evaluated as in compliance with the FCC RF For more info, contact your network service provider. emission guidelines. SAR information on this handset model is on file Exposure of humans to RF fields (RSS-102) Maximum transmit power with the FCC and can be found under the FCC ID Search section of The device employs low gain integral antennas that do not emit RF www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1179 or field in excess of Health Canada limits for the general population; GSM 850, 900 35 dBm 2AJOTTA-1184. consult Safety Code 6, obtainable from Health Canada's Web site at GSM 1800, 1900 32 dBm Additional information on Specific Absorption Rates (SAR) can be http://www.hc-sc.gc.ca/ WCDMA 1, 2, 4, 5, 8 25 dBm found on the FCC website at www.fcc.gov/general/radio-frequency- The radiated energy from the antennas connected to the wireless safety-0. adapters conforms to the ISED limit of the RF exposure requirement LTE 1, 2, 3, 4, 5, 7, 8, 25 dBm regarding ISED RSS-102, Issue 5 clause 4. To send data or messages, a good connection to the network is 12, 17, 28 needed. Sending may be delayed until such a connection is available. This device has an electronic label for certification information. To Bluetooth® 9.07 dBm Follow the separation distance instructions until the sending is access it, select Settings > System > Certification. finished. WLAN 2.4G 16.43 dBm During general use, the SAR values are usually well below the values Charge your device with the CH-51E (EU plug)/ CH-51X (UK plug)/ CH- stated above. This is because, for purposes of system efficiency and 51U (US plug)/ CH-51A (Australia plug)/ CH-51N (India plug) chargers. to minimise interference on the network, the operating power of your HMD Global may make additional battery or charger models available mobile is automatically decreased when full power is not needed for © 2019 HMD Global. HMD Global Oy is the exclusive licensee of the for this device. Charging time can vary depending on device the call. The lower the power output, the lower the SAR value. Nokia brand for phones & tablets. Nokia is a registered trademark of capability. Some of the accessories mentioned in this user guide, Nokia Corporation. Device models may have different versions and more than one value. such as charger, headset, or data cable, may be sold separately. Component and design changes may occur over time and some The Bluetooth word mark and logos are owned by the Bluetooth SIG, The surface of the device is nickel-free. changes could affect SAR values. Inc. and any use of such marks by HMD Global is under license. Parts of the device are magnetic. Metallic materials may be attracted For more info, go to www.sar-tick.com. Note that mobile devices to the device. Do not place credit cards or other magnetic stripe may be transmitting even if you are not making a voice call. Google, Google Assistant and other related marks are trademarks of cards near the device for extended periods of time, since the cards Your mobile device is also designed to meet the United States Google LLC. may be damaged. Federal Communications Commission (FCC) guidelines. FCC ratings Note: Pre-installed system software and apps use a significant for your device and more information on SAR can be found at http:/ part of memory space. /transition.fcc.gov/oet/rfsafety/sar.html. Keep a safe distance when using the flash. Do not use the flash on Information on IC SAR can be found at http://www.ic.gc.ca. people or animals at close range. Do not cover the flash while taking The World Health Organization (WHO) has stated that current a photo. scientific information does not indicate the need for any special precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use a hands-free kit to keep the device away from your head and body. Certification information (SAR) For more information and explanations and discussions on RF exposure, go to the WHO website at www.who.int/peh-emf/en. This mobile device meets guidelines for exposure to radio waves as set forth by the Council of Europe (CE). Refer to the following. Copyrights and other notices European RF Exposure Information EU Declaration of Conformity Your mobile device is a radio transmitter and receiver. It is designed Hereby, HMD Global Oy declares that this product is in not to exceed the limits for exposure to radio waves recommended compliance with the essential requirements and other by international guidelines. These guidelines were developed by the relevant provisions of Directive 2014/53/EU. A copy of the independent scientific organization ICNIRP and include safety EU Declaration of Conformity can be found at https:// margins designed to assure the protection of all persons, regardless www.nokia.com/en_int/phones/declaration-of-conformity. of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. FCC notice: The SAR limit for mobile devices is 2.0 W/kg and the highest SAR This device complies with part 15 of the FCC rules. Operation is value for this device when tested at the ear is 0.446 W/kg*. As mobile subject to the following two conditions: (1) This device may not cause devices offer a range of functions, they can be used in other harmful interference, and (2) this device must accept any positions, such as on the body. In this case, the highest tested SAR interference received, including interference that may cause value is 1.608 W/kg* at the separation distance of 0.5 cm from the undesired operation. For more info, go to www.fcc.gov/engineering- body. technology/electromagnetic-compatibility-division/radio- For electronic safety, maintain the separation distance with frequency-safety/faq/rf-safety. Any changes or modifications not accessories containing no metal, that position handset a minimum of expressly approved by HMD Global could void the user’s authority to the above distance. Use of other accessories may not ensure operate this equipment. Note: This equipment has been tested and compliance with RF exposure guidelines. found to comply with the limits for a Class B digital device, pursuant *The tests are carried out in accordance with international guidelines to part 15 of the FCC Rules. These limits are designed to provide for testing. reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with This mobile device meets guidelines for exposure to radio waves as the instructions, may cause harmful interference to radio set forth by the Federal Communications Commission (FCC). Refer to communications. However, there is no guarantee that interference the following. will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be FCC RF Exposure Information determined by turning the equipment off and on, the user is Your handset is a radio transmitter and receiver. It is designed and encouraged to try to correct the interference by one or more of the manufactured not to exceed the emission limits for exposure to radio following measures: frequency (RF) energy set by the Federal Communications • Reorient or relocate the receiving antenna. Commission of the U.S. Government. The guidelines are based on • Increase the separation between the equipment and receiver. standards that were developed by independent scientific • Connect the equipment into an outlet on a circuit different from organization through periodic and thorough evaluation of scientific that to which the receiver is connected. studies. The standards include a substantial safety margin designed • Consult the dealer or an experienced radio/TV technician for help. to assure the safety of all persons, regardless of age and health. The IC notice:


Document Created: 2019-10-26 06:15:15
Document Modified: 2019-10-26 06:15:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC