190328001SAR-1_FCC SAR_Appendix B

FCC ID: 2AIRN-003

RF Exposure Info

Download: PDF
FCCID_4475529

Test Laboratory: UnionTrust Date: 2019M/4 PO1_802.11b_Front Face_Ocm_1 DUT: EUT Communication System: Wlan 802.11b; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: £=2412 MHz; 0 = 1.77 mho/m; 8.= 37.7; p =1000 kg/m> DASY4 Configuration: — Probe: EX3DV4 — SN3838; ConvF(7.34, 7.34, 7.34); Calibrated: 2018/8/30 — Sensor—Surface: 1.4mm (Mechanical Surface Detection) — Electronics: DAE4 Sn887; Calibrated: 2018/4/27 — Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x81x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.481 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value=10.1 V/m; Power Drift=—0.03 dB Peak SAR (extrapolated)= 0.771 W/kg SAR(1 g) = 0.322 mW/g; SAR(10 g) = 0.143 mW/g Maximum value of SAR (measured) = 0.435 mW/g mWig 0.481 0.385 0.289 0.192 0.096 0.000

Test Laboratory: UnionTrust Date: 2019/59 PO2_BT_Front Face_Ocm_39 DUT: EUT Communication System: BT; Frequency: 2441 MHz:Duty Cycle: 1:3.26 Medium: H2450 Medium parameters used: {=2441 MHz; 0 = 1.78 mho/m; 8.= 40.1;p =1000 kg/m> DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvyF(4.57, 4.57, 4.57); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAEA4 $n662; Calibrated: 2019/4/11 — Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x81x1): Mcasurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.085 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 1.02 V/m; Power Drift= 0.03 dB Peak SAR (extrapolated)= 0.122 W/kg SAR(1 g) = 0.050 mW/g; SAR(10 g) = 0.023 mW/g Maximum value of SAR (measured) = 0.065 mW/g mWiq 0.085 0.068 0.051 0.034 0.017 0.000

Test Laboratory: UnionTrust Date: 4/10/2019 P03 802.11ac_VHT80_Top Side_0cm_Ch58 DUT: EUT Communication System: 802.11ac; Frequency: 5290 MHz;Duty Cycle: 1:1.30 Medium: H5G Medium parameters used: f = 5290 MHz; σ = 4.731 S/m; εr = 35.347; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: EX3DV4 - SN7506; ConvF(5.46, 5.46, 5.46); Calibrated: 6/22/2018 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1557; Calibrated: 6/5/2018 - Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 - Area Scan (41x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.409 W/kg - Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 6.967 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 0.514 W/kg SAR(1 g) = 0.111 W/kg; SAR(10 g) = 0.027 W/kg Maximum value of SAR (measured) = 0.327 W/kg

Test Laboratory: UnionTrust Date: 4/10/2019 P04 802.11ac_VHT80_Top Side_0cm_Ch106 DUT: EUT Communication System: 802.11ac; Frequency: 5530 MHz;Duty Cycle: 1:1.30 Medium: H5G Medium parameters used: f = 5530 MHz; σ = 4.973 S/m; εr = 35.013; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: EX3DV4 - SN7506; ConvF(5.17, 5.17, 5.17); Calibrated: 6/22/2018 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1557; Calibrated: 6/5/2018 - Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 - Area Scan (41x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.10 W/kg - Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 10.91 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 1.03 W/kg SAR(1 g) = 0.196 W/kg; SAR(10 g) = 0.043 W/kg Maximum value of SAR (measured) = 0.673 W/kg

Test Laboratory: UnionTrust Date: 4/10/2019 P05 802.11ac_VHT80_Top Side_0cm_Ch155 DUT: EUT Communication System: 802.11ac; Frequency: 5775 MHz;Duty Cycle: 1:1.30 Medium: H5G Medium parameters used: f = 5775 MHz; σ = 5.223 S/m; εr = 34.674; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: EX3DV4 - SN7506; ConvF(5.1, 5.1, 5.1); Calibrated: 6/22/2018 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1557; Calibrated: 6/5/2018 - Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 - Area Scan (41x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.40 W/kg - Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 10.60 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 4.94 W/kg SAR(1 g) = 0.437 W/kg; SAR(10 g) = 0.126 W/kg Maximum value of SAR (measured) = 1.30 W/kg

Test Laboratory: UnionTrust Date: 2019M/13 PO6_802.11b_Front Face_Ocm_1 DUT: EUT Communication System: Wlan 802.11b; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: B2450 Medium parameters used: £=2412 MHz; 0 = 1.96 mho/m; &.= 53.1; p=1000 kg/m> DASY4 Configuration: — Probe: EX3DV4 — SN3838; ConvF(7.31, 7.31, 7.31); Calibrated: 2018/8/30 — Sensor—Surface: 1.4mm (Mechanical Surface Detection) — Electronics: DAE4 Sn887; Calibrated: 2018/4/27 — Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x81x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.400 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 1.32 V/m; Power Drift=0.02 dB Peak SAR (extrapolated)= 0.725 W/kg SAR(1 g) = 0.301 mW/g; SAR(10 g) = 0.132 mW/g Maximum value of SAR (measured) =0.415 mW/g mWiq 0.400 0.320 0.240 0.160 0.080 0.000

Test Laboratory: UnionTrust Date: 2019/59 PO7_BT_Front Face_Ocm_39 DUT: EUT Communication System: BT; Frequency: 2441 MHz;Duty Cycle: 1:3.26 Medium: B2450 Medium parameters used: £= 2441 MHz; 0 = 2 mho/m; £,= 53; p= 1000 kg/m* DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(4.47, 4.47, 4.47); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP—1376 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x81x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.090 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 4.09 V/m; Power Drift=—0.02 dB Peak SAR (extrapolated)= 0.118 W/kg SAR(1 g) = 0.048 mW/g; SAR(10 g) = 0.021 mW/g Maximum value of SAR (measured) = 0.064 mW/g mWig 0.090 0.072 0.054 0.036 0.018 0.000

Test Laboratory: UnionTrust Date: 4/11/2019 P08 802.11ac_VHT80_Top Side_0cm_Ch58 DUT: EUT Communication System: 802.11ac; Frequency: 5290 MHz;Duty Cycle: 1:1.30 Medium: B5G Medium parameters used: f = 5290 MHz; σ = 5.37 S/m; εr = 49.27; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: EX3DV4 - SN7506; ConvF(4.91, 4.91, 4.91); Calibrated: 6/22/2018 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1557; Calibrated: 6/5/2018 - Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 - Area Scan (41x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.581 W/kg - Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 6.544 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.635 W/kg SAR(1 g) = 0.131 W/kg; SAR(10 g) = 0.033 W/kg Maximum value of SAR (measured) = 0.430 W/kg

Test Laboratory: UnionTrust Date: 4/11/2019 P09 802.11ac_VHT80_Top Side_0cm_Ch106 DUT: EUT Communication System: 802.11ac; Frequency: 5530 MHz;Duty Cycle: 1:1.30 Medium: B5G Medium parameters used: f = 5530 MHz; σ = 5.68 S/m; εr = 48.776; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: EX3DV4 - SN7506; ConvF(4.32, 4.32, 4.32); Calibrated: 6/22/2018 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1557; Calibrated: 6/5/2018 - Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 - Area Scan (41x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.22 W/kg - Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 11.95 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.930 W/kg SAR(1 g) = 0.181 W/kg; SAR(10 g) = 0.046 W/kg Maximum value of SAR (measured) = 0.649 W/kg

Test Laboratory: UnionTrust Date: 4/11/2019 P10 802.11ac_VHT80_Top Side_0cm_Ch155 DUT: EUT Communication System: 802.11ac; Frequency: 5775 MHz;Duty Cycle: 1:1.30 Medium: B5G Medium parameters used: f = 5775 MHz; σ = 6.026 S/m; εr = 48.302; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: EX3DV4 - SN7506; ConvF(4.31, 4.31, 4.31); Calibrated: 6/22/2018 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1557; Calibrated: 6/5/2018 - Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP/1376 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 - Area Scan (41x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.68 W/kg - Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 9.950 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 1.66 W/kg SAR(1 g) = 0.338 W/kg; SAR(10 g) = 0.105 W/kg Maximum value of SAR (measured) = 1.05 W/kg


Document Created: 2019-10-23 05:57:19
Document Modified: 2019-10-23 05:57:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC