Tune Up Procedure

FCC ID: 2AIOQ-FPCN10A

Parts List/Tune Up Info

Download: PDF
FCCID_3573881

                           Turn up Procedure.

Product Name: 16 Channel Walkie Talkie

Model: FPCN10A, FPCN20A, FPCN30A, FPCN40A, FPCN50A, FPCN60A, FPCN70A,
FPCN80A

FCC ID: 2AIOQ-FPCN10A


I would like to confirm this device does not have tune up information, because the
tune up is fixed by the manufacturer. Therefore, the user cannot tune up the device.

The radio frequency (RF) power detection circuit was set during the product design.
The power value detected was sent back to the MCU. The MCU will control the RF
power amplification control circuit to ensure the output power within the tolerance.
Also manufacture can adjust programming software to meet requirement.

The output power with tolerance is 32.5±0.5dBm for 12.5kHz Bandwidth;
The output power with tolerance is 32.5±0.5dBm for 6.25kHz Bandwidth;




1. Open the programming software. As below




                              properly    connected
                              PC and radio, then
                              open the radio power,
                              click here to read the
                              parameters of the radio


2、Click on Edit(E) ,Choice General Setting




                                                  Click on   Time-out Timer




3 、 Click Program(P) and choice test and tune you can adjust power
parameters to meet FCC Turn up procedure requirement


Dated this   July 10, 2017



Agency agreement expiration date:          Usually Give 8 - 12 Months



By:                                            Jun liu


                   Signature                       Printed

Title:   Manager


On behalf of :      Guangdong Samzuk Technology Development Co., Ltd



Telephone:       0762-3116133



Document Created: 2017-09-05 15:00:39
Document Modified: 2017-09-05 15:00:39

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC