ACTpro USB Desktop Reader

FCC ID: 2AILRUSBRD

Users Manual

Download: PDF
FCCID_3085933

pro USB Desktop Reader Operating and Installation Instructions ACT Product Code: ACT USB Reader ACTpro USB Desktop Reader iss4.indd 5 14/06/2016 12:24:05

Operating & Installation Instructions FCC ID: 2AILRUSBRD Model No. USB-RD This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operating & Installation Instructions 1 System overview The ACTpro USB reader is a plug and play desktop reader, with support for ACT RFID, HID, MIFARE Classic and DESFire EV1 technologies and is compatible with ACTenterprise versions 1.3.0.5 or later. 2 Installation 1. Install ACTEnterprise V1.3.0.5 or later. 2. Plug in USB reader into an available USB port. 3. Wait for the installation of the driver to complete. 4. Run ACTManage. 5. Present card to reader. 6. If the card is already assigned to a user, the user details page is displayed. 7. If the card is not assigned to a user, a new user details page is displayed with the card number entered. 3 Specifications Features Description 13.56MHz technology MIFARE Classic, MIFARE Plus, MIFARE DESFire EV1 125kHz technology ACTRFID and HID Dimensions 116 x 67 x 14mm / 4½” x 2¾” x ½” Power Supply 5V DC- supplied from USB port Current consumption <100mA Audio Indication Buzzer when card presented Red LED on: Normal Visual Indication Green LED flashes when valid card presented Amber LED flashing: not connected to PC Green LED Flashing: capture mode USB Cable 1.5m / 4½ ft USB cable Learned Cards and Site Coded cards are not supported by the USB reader. 1 Copyright © 2016 Access Control Technology Ltd. Part No.18-00095 Iss 4 ACTpro USB Desktop Reader iss4.indd 2 14/06/2016 12:24:04

Operating & Installation Instructions 4 Non ACT MIFARE Cards: The reader may be programmed to read non ACT MIFARE cards. From ACTInstall, Go to ACTInstall -> Advanced Setup -> Card Configuration -> Mifare Format Select the appropriate MIFARE card type then press Save: ACT MIFARE Card: This is the default setting to read ACT MIFARE Cards Serial Operation: Returns the MIFARE serial number Reverse Serial Operation: Returns the MIFARE serial number in reverse DESFire EV1 ACT File Operation: Set when using ACT DESFire EV1 cards OEM MIFARE card: Non-ACT MIFARE cards OEM MIFARE card with MAD: Non-ACT MIFARE cards 5 Capture Cards: For cards with both 125 kHz and MIFARE technology, cards should be enrolled using the capture card facility in ACTManage -> Users Click on the Capture card icon beside the card number. To read the 125kHz number on the card, select “Read from USB Reader” and click capture. To read the ACT MIFARE number on the card, select “Read from MIFARE USB” Reader and click capture. Copyright © 2016 Access Control Technology Ltd. Part No.18-00095 Iss 4 2 ACTpro USB Desktop Reader iss4.indd 3 14/06/2016 12:24:05

Access Control Technology Ltd. reserve the right to change the contents of this manual and the system it applies to without prior notice. While every effort has been taken by ACT to ensure the accuracy of the information contained within this document, ACT assumes no responsibility for any errors or omissions. No liability is assumed for damages resulting from the use of information contained within this document. Ireland Office Unit C1, South City Business Centre, Tallaght, Dublin, D24 PN28, Ireland United Kingdom Office 601 Birchwood One, Dewhurst Road, Birchwood, Warrington, WA3 7GB, UK Ireland: +353 (0)1 466 2570 UK: +44 (0)161 236 9488 Email: info@act.eu www.act.eu www.act-access.com (USA) Copyright © 2016 Access Control Technology Ltd. Part No.18-00095 Iss 4 ACTpro USB Desktop Reader iss4.indd 4 14/06/2016 12:24:05


Document Created: 2016-06-24 09:06:12
Document Modified: 2016-06-24 09:06:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC