2AIBX-NIU5L

FCC ID

Equipment: NIU5 WiFi / BLE Module

ELECTROLUX ITALIA S.p.A. -NIU5L

Corso Lino Zanussi 24, Porcia, N/A 33080 Italy

Application
Frequency Range
Final Action Date
Granted
/nI1kfK5X55wXKtAoR84cg==
2402.0-2480.0
2019-03-11
APPROVED
/nI1kfK5X55wXKtAoR84cg==
2412.0-2462.0
2019-03-11
APPROVED
gvW9Q24ugozpj5A6i+1fug==
5180.0-5240.0
2019-03-11
APPROVED
gvW9Q24ugozpj5A6i+1fug==
5260.0-5320.0
2019-03-11
APPROVED
gvW9Q24ugozpj5A6i+1fug==
5500.0-5720.0
2019-03-11
APPROVED
gvW9Q24ugozpj5A6i+1fug==
5745.0-5825.0
2019-03-11
APPROVED
File NameDocument TypeDateDirect
Test Report BT 4.0 LETest Report 2019-03-11 00:00:00 pdf
Test Report 2.4GTest Report 2019-03-11 00:00:00 pdf
POACover Letter(s) 2019-03-11 00:00:00 pdf
MPE Test ReportRF Exposure Info 2019-03-11 00:00:00 pdf
Modular Approval Cover LetterCover Letter(s) 2019-03-11 00:00:00 pdf
Label InfoID Label/Location Info 2019-03-11 00:00:00 pdf
DTS UNII Declaration LetterCover Letter(s) 2019-03-11 00:00:00 pdf
Confidential Request LetterCover Letter(s) 2019-03-11 00:00:00 pdf
15B SDoC Cover LetterCover Letter(s) 2019-03-11 00:00:00 pdf
Test Report DFSTest Report 2019-03-11 00:00:00 pdf
Test Report 5GTest Report 2019-03-11 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-03-11 00:00:00 pdf
SchematicsSchematics N/A
User ManualUsers Manual 2019-09-07 00:00:00 N/A
Block DiagramBlock Diagram N/A
External PhotosExternal Photos 2019-09-07 00:00:00 N/A
Internal PhotosInternal Photos 2019-09-07 00:00:00 N/A
Test Setup Photos 2.4GTest Setup Photos 2019-09-07 00:00:00 N/A
Operational DescriptionOperational Description N/A
Test Setup Photos BT 4.0 LETest Setup Photos 2019-09-07 00:00:00 N/A
Test Report NIITest Report 2019-03-11 00:00:00 N/A
Test Setup Photos 5GTest Setup Photos 2019-09-07 00:00:00 N/A
Test Setup Photos DFSTest Setup Photos 2019-09-07 00:00:00 N/A
Software Security Statement Operational DescriptionSDR Software/Security Inf N/A

Application Details:

EquipmentNIU5 WiFi / BLE Module
FRN0025555939
Grantee Code2AIBX
Product Code-NIU5L
Applicant BusinessELECTROLUX ITALIA S.p.A.
Business AddressCorso Lino Zanussi 24 , Porcia,N/A Italy 33080
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantPierluigi Toccane – GTC Advanced Electronic Director
Applicant Phone
Applicant Fax0039-0434-394915
Applicant Email[email protected]
Applicant MailStop
Test FirmSporton International Inc.
Test Firm ContactAlex Chen
Test Firm Phone
Test Firm Fax+886-3-327-0978
Test Firm Email[email protected]
Certified ByLeo Huang – Manager
Comment [/nI1kfK5X55wXKtAoR84cg==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
Comment [gvW9Q24ugozpj5A6i+1fug==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC