Test Report DFS

FCC ID: 2AIBX-NIU5L

Test Report

Download: PDF

                FCC DFS Test Report                                                         Report No. : FZ8O3112




                            FCC DFS Test Report
      FCC ID                         : 2AIBX-NIU5L
      Equipment                      : NIU5 WiFi / BLE Module
      Brand Name                     : Electrolux
      Model Name                     : NIU5-50
      Applicant                      : ELECTROLUX ITALIA S.p.A.
                                       Corso Lino Zanussi 24 / 33080 Porcia (PN), Italy
      Manufacturer                   : LITE-ON Technology (Changzhou) CO.LTD
                                       No.88, Yanghu Road, Wujin Hi-Tech Industrial
                                       Development Zone, Jiangsu Province, China
                                       Zip Code: 213166
      Standard                       : 47 CFR FCC Part 15.407

 The product was received on Oct. 31, 2018, and testing was started from Nov. 20, 2018 and
 completed on Nov. 20, 2018. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications
 Laboratory, would like to declare that the tested sample has been evaluated in accordance with the
 procedures given in KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 and shown
 compliance with the applicable technical standards.

 The report must not be used by the client to claim product certification, approval, or endorsement by
 TAF or any agency of United States government.

 The test results in this report apply exclusively to the tested model / sample. Without written
 approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test
 report shall not be reproduced except in full.




   ___________________________________________                __________________________________________
                 Approved by: Phoenix Chen                                     SDoC by: XXXXX


        SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory
                           No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.)


TEL : 886-3-327-3456                                                              Page Number      : 1 of 23
FAX : 886-3-327-0973                                                              Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                Report Version   : 01
FCC ID : 2AIBX-NIU5L


                    FCC DFS Test Report                                                                                               Report No. : FZ8O3112




                                                             Table of Contents
HISTORY OF THIS TEST REPORT ..................................................................................................................3

SUMMARY OF TEST RESULT .........................................................................................................................4

1         GENERAL DESCRIPTION ....................................................................................................................5

1.1       Information..............................................................................................................................................5
1.2       Testing Applied Standards .....................................................................................................................7
1.3       Testing Location Information ..................................................................................................................7

2         TEST CONFIGURATION OF EUT.........................................................................................................8

2.1       Test Channel Frequencies Configuration...............................................................................................8
2.2       The Worst Case Measurement Configuration ........................................................................................8
2.3       Support Equipment.................................................................................................................................8

3         DYNAMIC FREQUENCY SELECTION (DFS) TEST RESULT .............................................................9

3.1       General DFS Information .......................................................................................................................9
3.2       Radar Test Waveform Calibration ........................................................................................................12
3.3       In-service Monitoring ............................................................................................................................18

4         TEST EQUIPMENT AND CALIBRATION DATA ................................................................................22

5         MEASUREMENT UNCERTAINTY ......................................................................................................23

Appendix A. Test Photos
Photographs of EUT V01




TEL : 886-3-327-3456                                                                                                    Page Number                : 2 of 23
FAX : 886-3-327-0973                                                                                                    Issued Date                : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                                                      Report Version             : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                   Report No. : FZ8O3112




                                          History of this test report

       Report No.               Version               Description                         Issued Date

        FZ8O3112                     01           Initial issue of report                 Jan. 10, 2019




TEL : 886-3-327-3456                                                        Page Number         : 3 of 23
FAX : 886-3-327-0973                                                        Issued Date         : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                          Report Version      : 01
FCC ID : 2AIBX-NIU5L


                 FCC DFS Test Report                                                                 Report No. : FZ8O3112




                                                 Summary of Test Result

Report                                                                                   Result
             Ref. Std. Clause                          Test Items                                             Remark
Clause                                                                                 (PASS/FAIL)
                                      DFS: In-Service Monitoring for Channel Move                    CMT ≤ 10sec
  3.3    KDB 905462 7.8.3                                                                 PASS
                                      Time (CMT)
                                      DFS: In-Service Monitoring for Channel Closing                 CCTT ≤ 60 ms starting at
  3.3    KDB 905462 7.8.3                                                                 PASS
                                      Transmission Time (CCTT)                                       CMT 200ms
                                      DFS: In-Service Monitoring for Non-Occupancy                   NOP ≥ 30 min
  3.3    KDB 905462 7.8.3                                                                 PASS
                                      Period (NOP)



Declaration of Conformity:
The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or
requirements declared by manufacturers.
Comments and explanations:
None

 Reviewed by: Ben Tseng

 Report Producer: Jenny Yang




 TEL : 886-3-327-3456                                                                      Page Number        : 4 of 23
 FAX : 886-3-327-0973                                                                      Issued Date        : Jan. 10, 2019
 Report Template No.: HE1-D2 Ver2.3                                                        Report Version     : 01
 FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                       Report No. : FZ8O3112




1         General Description
1.1       Information
1.1.1     RF General Information
         Specification Items                                      Description
 Product Type                        WLAN (1TX, 1RX)
 Radio Type                          Intentional Transceiver
 Power Type                          From host system
 Modulation                          IEEE 802.11a: OFDM (BPSK / QPSK / 16QAM / 64QAM)
                                     IEEE 802.11n: see the below table
 Data Rate (Mbps)                    IEEE 802.11a: OFDM (6/9/12/18/24/36/48/54)
                                     IEEE 802.11n: see the below table
 Channel Bandwidth                   20 MHz operating channel bandwidth
 Operating Mode                          Master
                                         Bridge
                                         Mesh
                                         Client with radar detection
                                         Client without radar detection
Communication Mode                       IP Based (Load Based)            Frame Based
TPC Function                             With TPC                         Without TPC
Weather Band (5600~5650MHz)              With 5600~5650MHz                Without 5600~5650MHz
 Power-on cycle                      NA (No Channel Availability Check Function)
 Software / Firmware Version         2.0.1
 Note: EUT employ a TPC mechanism and TPC have the capability to operate at least 6 dB below highest RF
      output power.




TEL : 886-3-327-3456                                                            Page Number      : 5 of 23
FAX : 886-3-327-0973                                                            Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                              Report Version   : 01
FCC ID : 2AIBX-NIU5L


                  FCC DFS Test Report                                                      Report No. : FZ8O3112



Antenna & Bandwidth
              Antenna                                                 One (TX)
         Band width Mode                  20 MHz                      40 MHz                        80 MHz
           IEEE 802.11a                      V                           X                            X
           IEEE 802.11n                      V                           X                            X
          IEEE 802.11ac                      X                           X                            X

IEEE 11n Spec.
                                               Number of
                 Protocol                                                            Data Rate / MCS
                                          Transmit Chains (NTX)
           802.11n (HT20)                              1                                MCS0-15
 Note 1: IEEE Std. 802.11n modulation consists of HT20 (HT: High Throughput).
          Then EUT support HT20.
 Note 2: HT20 use a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM modulation.
 Note 3: Modulation modes consist of below configuration:
          11a: IEEE 802.11a, HT20: IEEE 802.11n

1.1.2     Antenna Information
  Ant.                 Brand                 Model Name               Antenna Type              Connector
   1                   LITE-ON                     -               Printed Antenna                     -
   2                   LITE-ON                     -               Printed Antenna                     -


                                                           Gain (dBi)
  Ant.     Port
                              2.4G                         5G                                  BT
   1         1                 1.7                         3.2                                  -
   2         1                   -                          -                                  1.5
Note 1: The EUT has two antennas.
For 2.4GHz function:
For IEEE 802.11 b/g/n mode (1TX/1RX)
Only Ant. 1 (port 1) can be used as transmitting/receiving antenna.
For 5GHz function:
For IEEE 802.11 a/an mode (1TX/1RX)
Only Ant. 1 (port 1) can be used as transmitting/receiving antenna.
For BT function:
For IEEE 802.15.1 Bluetooth mode (1TX/1RX)
Only Ant. 2 (port 1) can be used as transmitting/receiving antenna.




TEL : 886-3-327-3456                                                             Page Number               : 6 of 23
FAX : 886-3-327-0973                                                             Issued Date               : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                               Report Version            : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                             Report No. : FZ8O3112




1.1.3     DFS Band Carrier Frequencies
There are three bandwidth systems.
For 20MHz bandwidth systems, use Channel 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140.
For 40MHz bandwidth systems, use Channel 54, 62, 102, 110, 134.
For 80MHz bandwidth systems, use Channel 58, 106
      Frequency Band                 Channel No.       Frequency          Channel No.               Frequency
                                         52             5260 MHz               60                   5300 MHz
      5250~5350 MHz                      54             5270 MHz               62                   5310 MHz
           Band 2                        56             5280 MHz               64                   5320 MHz
                                         58             5290 MHz                -                       -
                                         100            5500 MHz               112                  5560 MHz
                                         102            5510 MHz               116                  5580 MHz
      5470~5725 MHz                      104            5520 MHz               132                  5660 MHz
           Band 3                        106            5530 MHz               134                  5670 MHz
                                         108            5540 MHz               136                  5680 MHz
                                         110            5550 MHz               140                  5700 MHz

1.2       Testing Applied Standards
According to the specifications of the manufacturer, the EUT must comply with the requirements of the following
standards:
    KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02
    KDB 905462 D03 Client Without DFS New Rules v01r02

1.3       Testing Location Information
                                                   Testing Location
      HWA YA        ADD     :   No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.)
                    TEL     :   886-3-327-3456          FAX      :   886-3-327-0973
                                      Test site Designation No. TW1190 with FCC.
      JHUBEI        ADD     :   No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C.
                    TEL     :   886-3-656-9065          FAX      :   886-3-656-9085
                                      Test site Designation No. TW0006 with FCC.
  Test Condition            Test Site No.           Test Engineer        Test Environment            Test Date
      DFS Site                  DFS03-HY                Dexter            26.1°C / 63.2%            20/Nov/2018




TEL : 886-3-327-3456                                                                  Page Number           : 7 of 23
FAX : 886-3-327-0973                                                                  Issued Date           : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                    Report Version        : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                               Report No. : FZ8O3112




2          Test Configuration of EUT
2.1        Test Channel Frequencies Configuration
                                         Test Channel Frequencies Configuration
                            IEEE Std.                                         Test Channel Freq. (MHz)
                          802.11n (HT20)                                              5500 MHz

2.2        The Worst Case Measurement Configuration
                              The Worst Case Mode for Following Conformance Tests
             Tests Item              Dynamic Frequency Selection (DFS)
           Test Condition            Conducted measurement at transmit chains
                                     The EUT shall be configured to operate at the highest transmitter output power
                                     setting. If more than one antenna assembly is intended for this power setting, the
                                     gain of the antenna assembly with the lowest gain shall be used.
          Modulation Mode            802.11n (HT20)

2.3        Support Equipment
                                                      Support Equipment
    No.                 Equipment                           Brand Name                          Model Name
      1                 AP (Master)                           EDIMAX                           EW-7979WAC
      2                  NoteBook                               DELL                           Latitude E5550
      3                Adapter for NB                           DELL                            FA90PSO-00
      4                  NoteBook                               DELL                           Latitude E5540
      5                Adapter for NB                           DELL                            FA90PSO-00




TEL : 886-3-327-3456                                                                    Page Number       : 8 of 23
FAX : 886-3-327-0973                                                                    Issued Date       : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                      Report Version    : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                          Report No. : FZ8O3112




3         Dynamic Frequency Selection (DFS) Test Result
3.1       General DFS Information
3.1.1     DFS Parameters
                                         Table D.1: DFS requirement values
                         Parameter                                                Value
                 Non-occupancy period                 Minimum 30 minutes
            Channel Availability Check Time           60 seconds
                   Channel Move Time                  10 seconds (Note 1).
          Channel Closing Transmission Time           200 milliseconds + an aggregate of 60 milliseconds over
                                                      remaining 10 second periods. (Notes 1 and 2).
               U-NII Detection Bandwidth              Minimum 100% of the 99% power bandwidth (Note 3).
    Note 1: Channel Move Time and the Channel Closing Transmission Time should be performed with Radar
            Type 0. The measurement timing begins at the end of the Radar Type 0 burst.
    Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning
            of the Channel Move Time plus any additional intermittent control signals required to facilitate
            Channel changes (an aggregate of 60 milliseconds) during the remainder of the 10 second period.
            The aggregate duration of control signals will not count quiet periods in between transmissions.
    Note 3: During the U-NII Detection Bandwidth detection test, radar type 0 is used and for each frequency
            step the minimum percentage of detection is 90%. Measurements are performed with no data traffic.


                                       Table D.2: Interference threshold values
              Maximum Transmit Power                                      Value (see note)
                       EIRP ≥ 200 mW                                          -64 dBm
        EIRP < 200 mW and PSD < 10dBm/MHz                                     -62 dBm
        EIRP < 200 mW and PSD ≥ 10dBm/MHz                                     -64 dBm
    Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna.
    Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test
            transmission waveforms to account for variations in measurement equipment. This will ensure that
            the test signal is at or above the detection threshold level to trigger a DFS response.
    Note3: EIRP is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911.




TEL : 886-3-327-3456                                                               Page Number      : 9 of 23
FAX : 886-3-327-0973                                                               Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                 Report Version   : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                          Report No. : FZ8O3112




3.1.2     Applicability of DFS Requirements Prior to Use of a Channel
                                                                DFS Operational mode
                Requirement                                         Client without radar        Client with radar
                                                Master
                                                                         detection                  detection
                                                  Yes                   Not required                   Yes
   Non-Occupancy Period
                                                                       (See the note)
   DFS Detection Threshold                        Yes                   Not required                   Yes
   Channel Availability Check Time                Yes                   Not required               Not required
   U-NII Detection Bandwidth                      Yes                   Not required                   Yes
Note :
According to KDB 905462 D03 Client Without DFS New Rules v01r02 (b) 6."An analyzer plot that contains a single
30-minute sweep on the original channel "

3.1.3     Applicability of DFS Requirements during Normal Operation
                                                                DFS Operational mode
                Requirement                                         Client without radar        Client with radar
                                                Master
                                                                         detection                  detection
   DFS Detection Threshold                        Yes                   Not required                   Yes
   Channel Closing Transmission Time              Yes                       Yes                        Yes
   Channel Move Time                              Yes                       Yes                        Yes
   U-NII Detection Bandwidth                      Yes                   Not required                   Yes


   Additional requirements for devices        Master Device or Client
                                                                             Client Without Radar Detection
   with multiple bandwidth modes                with Radar Detection

   U-NII Detection Bandwidth and
                                           All BW modes must be tested                     Not required
   Statistical Performance Check

   Channel Move Time and Channel            Test using widest BW mode         Test using the widest BW mode
   Closing Transmission Time                            available                      available for the link

   All other tests                              Any single BW mode                         Not required

   Note: Frequencies selected for statistical performance check (Section 7.8.4) should include several
   frequencies within the radar detection bandwidth and frequencies near the edge of the radar detection
   bandwidth. For 802.11 devices it is suggested to select frequencies in each of the bonded 20 MHz
   channels and the channel center frequency.




TEL : 886-3-327-3456                                                              Page Number          : 10 of 23
FAX : 886-3-327-0973                                                              Issued Date          : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                Report Version       : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                          Report No. : FZ8O3112




3.1.4     Channel Loading/Data Streaming
         The data file (MPEG-4) has been transmitting in a streaming mode.
         Software to ping the client is permitted to simulate data transfer with random ping intervals.
         Minimum channel loading of approximately 17%.
         Unicast protocol has been used.




TEL : 886-3-327-3456                                                               Page Number        : 11 of 23
FAX : 886-3-327-0973                                                               Issued Date        : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                 Report Version     : 01
FCC ID : 2AIBX-NIU5L


                  FCC DFS Test Report                                                           Report No. : FZ8O3112




3.2           Radar Test Waveform Calibration
3.2.1         Short Pulse Radar Test Waveforms
                                                                                      Minimum
   Radar        Pulse Width                                                         Percentage of      Minimum
                                 PRI (µsec)            Number of Pulses
   Type           (µsec)                                                             Successful         Trials
                                                                                      Detection
      0                1              1428                      18                   See Note 1        See Note 1
                                 15 unique
                                PRI in KDB
      1A               1                                                                 60%               15
                                905462 D02
                                  Table 5a               1   19  10 6   
                                                Roundup                  
                                                          360   PRI     
                                 15 unique
                                 PRI within                                   
      1B               1         518-3066,                                               60%               15
                                Excluding 1A
                                    PRI
      2             1-5              150-230                23-29                       60%                30
      3            6-10              200-500                16-18                       60%                30
      4            11-20             200-500                12-16                        60%               30
   Aggregate (Radar Types 1-4)                                                           80%              120

   Note 1: Short Pulse Radar Type 0 should be used for the detection bandwidth test, channel move time, and
   channel closing time tests.
A minimum of 30 unique waveforms are required for each of the short pulse radar types 1 through 4. If more than
30 waveforms are used for short pulse radar types 1 through 4, then each additional waveform must also be
unique and not repeated from the previous waveforms. The aggregate is the average of the percentage of
successful detections of short pulse radar types 1-4.

3.2.2         Long Pulse Radar Test Waveform
                                                                                      Minimum
                   Pulse      Chirp                    Number of
      Radar                                                      Number of          Percentage of      Minimum
                   Width      Width       PRI (µsec)    Pulses
      Type                                                        Bursts             Successful         Trials
                   (µsec)     (MHz)                    per Burst
                                                                                      Detection
          5        50-100      5-20       1000-2000       1-3        8-20                80%                  30
Each waveform is defined as follows:
   The transmission period for the Long Pulse Radar test signal is 12 seconds.
   There are a total of 8 to 20 Bursts in the 12 second period, with the number of Bursts being randomly chosen.
    This number is Burst Count.
   Each Burst consists of 1 to 3 pulses, with the number of pulses being randomly chosen. Each Burst within
    the 12 second sequence may have a different number of pulses.
   The pulse width is between 50 and 100 microseconds, with the pulse width being randomly chosen. Each
    pulse within a Burst will have the same pulse width. Pulses in different Bursts may have different pulse
    widths.
   Each pulse has a linear FM chirp between 5 and 20 MHz, with the chirp width being randomly chosen. Each
    pulse within a transmission period will have the same chirp width. The chirp is centered on the pulse. For
    example, with a radar frequency of 5300 MHz and a 20 MHz chirped signal, the chirp starts at 5290 MHz and


TEL : 886-3-327-3456                                                                  Page Number      : 12 of 23
FAX : 886-3-327-0973                                                                  Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                    Report Version   : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                         Report No. : FZ8O3112



      ends at 5310 MHz.
     If more than one pulse is present in a Burst, the time between the pulses will be between 1000 and 2000
      microseconds, with the time being randomly chosen. If three pulses are present in a Burst, the time between
      the first and second pulses is chosen independently of the time between the second and third pulses.
     The 12 second transmission period is divided into even intervals. The number of intervals is equal to Burst
      Count. Each interval is of length (12,000,000 / Burst Count) microseconds. Each interval contains one Burst.
      The start time for the Burst, relative to the beginning of the interval, is between 1 and [(12,000,000 / Burst
      Count) – (Total Burst Length) + (One Random PRI Interval)] microseconds, with the start time being
      randomly chosen. The step interval for the start time is 1 microsecond. The start time for each Burst is
      chosen independently.

3.2.3       Frequency Hopping Radar Test Waveform
                                                                                 Minimum
                Pulse                                          Hopping
    Radar                     PRI    Pulses     Hopping                        Percentage of         Minimum
                Width                                         Sequence
    Type                    (µsec)   per Hop   Rate (kHz)                       Successful            Trials
                (µsec)                                       Length (ms)
                                                                                 Detection
        6          1         333       9         0.333            300                70%                   30

The FCC Type 6 waveform uses a static waveform with 100 bursts in the instruments ARB. In addition, the RF list
mode is operated with a list containing 100 frequencies from a randomly generated list and it had be ensured that
at least one of the random frequencies falls into the UNII Detection Bandwidth of the DUT. Each burst from the
waveform file initiates a trigger pulse at the beginning that switches the RF list from one item to the next one.


3.2.4       DFS Threshold Level
                                               DFS Threshold Level
    DFS Threshold level:      -63    dBm         at the antenna connector
                                                 in front of the antenna
    The Interference Radar Detection Threshold Level is is -64 dBm + 0 [dBi] + 1 dB = -63 dBm. That had been
    taken into account the output power range and antenna gain.

3.2.5       Calibration Setup
                                       Client Conducted Calibration Setup




TEL : 886-3-327-3456                                                              Page Number       : 13 of 23
FAX : 886-3-327-0973                                                              Issued Date       : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                Report Version    : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                         Report No. : FZ8O3112




3.2.6     Radar Waveform calibration Plot
Modulation Mode: 802.11n (HT20)             Test Frequency: 5500 MHz
Radar #0 DFS detection threshold level




TEL : 886-3-327-3456                                              Page Number      : 14 of 23
FAX : 886-3-327-0973                                              Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                Report Version   : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                   Report No. : FZ8O3112




3.2.7     Test Setup
A spectrum analyzer is used as a monitor to verify that the EUT has vacated the Channel within the (Channel
Closing Transmission Time and Channel Move Time, and does not transmit on a Channel during the
Non-Occupancy Period after the detection and Channel move.

                                Client without Radar Detect Conducted Measurement




TEL : 886-3-327-3456                                                        Page Number      : 15 of 23
FAX : 886-3-327-0973                                                        Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                          Report Version   : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                     Report No. : FZ8O3112




3.2.8     Data traffic Plot
EUT Data traffic Plot                Modulation Mode: 802.11n (HT20)   Test Frequency: 5500 MHz




Master Data Traffic Plot             Modulation Mode: 802.11n (HT20)   Test Frequency: 5500 MHz




TEL : 886-3-327-3456                                                          Page Number      : 16 of 23
FAX : 886-3-327-0973                                                          Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                            Report Version   : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                     Report No. : FZ8O3112



Without Data Traffic Plot            Modulation Mode: 802.11n (HT20)   Test Frequency: 5500 MHz




TEL : 886-3-327-3456                                                          Page Number      : 17 of 23
FAX : 886-3-327-0973                                                          Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                            Report Version   : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                        Report No. : FZ8O3112




3.3       In-service Monitoring
3.3.1     In-service Monitoring Limit
                                            In-service Monitoring Limit
             Channel Move Time             10 sec
   Channel Closing Transmission Time 200 ms + an aggregate of 60 ms over remaining 10 sec periods.
           Non-occupancy period            Minimum 30 minutes

3.3.2     Measuring Instruments
Refer a test equipment and calibration data table in this test report.

3.3.3     Test Procedures
                                                    Test Method
        Verified during In-Service Monitoring; Channel Closing Transmission Time, Channel Move Time. Client
        Device will associate with the EUT. Observe the transmissions of the EUT at the end of the radar Burst
        on the Operating Channel for duration greater than 10 seconds. Measure and record the transmissions
        from the EUT during the observation time (Channel Move Time). Compare the Channel Move Time and
        Channel Closing Transmission Time limits.
        Verified during In-Service Monitoring; Channel Closing Transmission Time, Channel Move Time. One
        12 sec plot needs to be reported for the Short Pulse Radar Types 0. And zoom-in a 60 ms plot verified
        channel closing time for the aggregate transmission time starting from 200ms after the end of the radar
        signal to the completion of the channel move.
        Verified during In-Service Monitoring; Non-Occupancy Period. Client Device will associate with the EUT.
        Observe the transmissions of the EUT at the end of the radar Burst on the Operating Channel for
        duration greater than 10 seconds. Measure and record the transmissions from the EUT during the
        observation time (Non-Occupancy Period). Compare the Non-Occupancy Period limits.

3.3.4     Test Result of In-service Monitoring
Modulation Mode: 802.11n (HT20)
                                                                 Test Result
                       Parameter                                                                   Limit
                                                                   Type 0
Test Channel (MHz)                                                5500 MHz                           -
Channel Move Time (sec.)                                           0.4995                          < 10s
Channel Closing Transmission Time (ms) (Note)                       0.900                         < 60ms
Non-Occupancy Period (min.)                                          ≧30                          ≧ 30 min
Note: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the
        Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move
        (an aggregate of 60 milliseconds) during the remainder of the 10 seconds period. The aggregate duration of
        control signals will not count quiet periods in between transmissions.




TEL : 886-3-327-3456                                                             Page Number          : 18 of 23
FAX : 886-3-327-0973                                                             Issued Date          : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                               Report Version       : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                       Report No. : FZ8O3112



3.3.5     Test Plot of In-Service Monitoring for Channel Move Time
            Modulation Mode                 Freq.                      Radar Type
              802.11n (HT20)              5500 MHz                               0




      EUT signal




        Radar




TEL : 886-3-327-3456                                            Page Number          : 19 of 23
FAX : 886-3-327-0973                                            Issued Date          : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                              Report Version       : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                   Report No. : FZ8O3112




3.3.6     Test Plot of In-Service Monitoring for Channel Closing Transmission Time
            Modulation Mode                        Freq.                           Radar Type
              802.11n (HT20)                     5500 MHz                                    0
   Channel Closing Transmission Time is comprised of 200 ms starting at the beginning of the Channel Move
   Time plus 60ms additional intermittent control signals




TEL : 886-3-327-3456                                                        Page Number          : 20 of 23
FAX : 886-3-327-0973                                                        Issued Date          : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                          Report Version       : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                                      Report No. : FZ8O3112




3.3.7     Test Plot of In-Service Monitoring for Non-Occupancy Period
                       Modulation Mode                                          Freq.
                        802.11n (HT20)                                       5500 MHz
   Non-Occupancy Period
   During the 30 minutes observation time, UUT did not make any transmissions on a channel after a radar
   signal was detected on that channel by either the Channel Availability Check or the In-Service Monitoring.




TEL : 886-3-327-3456                                                           Page Number      : 21 of 23
FAX : 886-3-327-0973                                                           Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                             Report Version   : 01
FCC ID : 2AIBX-NIU5L


                  FCC DFS Test Report                                                            Report No. : FZ8O3112




4         Test Equipment and Calibration Data
                                                                                          Calibration   Calibration Due
      Instrument       Manufacturer     Model No.     Serial No.        Spec.
                                                                                             Date            Date

       Spectrum
                         Keysight        N9010A      MY55150165       9kHz~7GHz          15/Nov/2018     14/Nov/2019
       Analyzer

     Vector Signal
                         Keysight        N5182B      MY53051912      9kHz ~ 6GHz         04/Dec/2017     03/Dec/2018
       Generator

                         HUBER+
     RF cable 0.5m                    SUCOFLEX 104   MY22999/4     25 MHz ~ 26.5 GHz     01/Nov/2018     31/Oct/2019
                        SUHNER

                         HUBER+
     RF cable 0.2m                    SUCOFLEX 104   MY23003/4     25 MHz ~ 26.5 GHz     01/Nov/2018     31/Oct/2019
                        SUHNER

                         HUBER+
     RF cable 1.5m                    SUCOFLEX 104   MY12586/4     25 MHz ~ 26.5 GHz     01/Nov/2018     31/Oct/2019
                        SUHNER




TEL : 886-3-327-3456                                                                   Page Number        : 22 of 23
FAX : 886-3-327-0973                                                                   Issued Date        : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                                                     Report Version     : 01
FCC ID : 2AIBX-NIU5L


                FCC DFS Test Report                                Report No. : FZ8O3112




5         Measurement Uncertainty

 Test Items                           Uncertainty   Remark
 Conducted Emission                   1.3 dB        Confidence levels of 95%
 Temperature                          0.7 ℃         Confidence levels of 95%
 Humidity                             4%            Confidence levels of 95%




TEL : 886-3-327-3456                                     Page Number      : 23 of 23
FAX : 886-3-327-0973                                     Issued Date      : Jan. 10, 2019
Report Template No.: HE1-D2 Ver2.3                       Report Version   : 01
FCC ID : 2AIBX-NIU5L



Document Created: 2019-01-10 17:14:41
Document Modified: 2019-01-10 17:14:41

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC