test report

FCC ID: 2AHVS-MIC-0001

Test Report

Download: PDF

FCCID_3195158

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

FCC TEST REPORT
FOR
GUANGZHOU ADS AUDIO SCIENCE & TECHNOLOGY CO., LTD.
WIRELESS MICROPHONE
Model No.: W-1606D
Additional Model No.: Please refer to page 7

Prepared for : GUANGZHOU ADS AUDIO SCIENCE & TECHNOLOGY CO., LTD.
Address : SHIMA INDUSTRIAL PARK, XINSHI TOWN, BAIYUN DISTRICT,
GUANGZHOU, China

Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd.
Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an
District, Shenzhen, Guangdong, China
Tel : (+86)755-82591330
Fax : (+86)755-82591332
Web : www.LCS-cert.com
Mail : webmaster@LCS-cert.com

Date of receipt of test sample : June 06, 2016
Number of tested samples : 1
Serial number : Prototype
ate of Test : June 06, 2016~August 18, 2016
Date of Report : August 18, 2016

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 1 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

FCC -- TEST REPORT

August 18, 2016
Test Report No. : LCS1606060517E
Date of issue

Type / Model........................... : W-1606D

EUT......................................... : WIRELESS MICROPHONE

Applicant............................... : GUANGZHOU ADS AUDIO SCIENCE & TECHNOLOGY CO., LTD.
Address.................................. : SHIMA INDUSTRIAL PARK, XINSHI TOWN, BAIYUN DISTRICT,
GUANGZHOU, China
Telephone............................... : 020-36409886
Fax.......................................... : 020-36409999

Manufacturer........................ : GUANGZHOU ADS AUDIO SCIENCE & TECHNOLOGY CO., LTD.
Address................................... : SHIMA INDUSTRIAL PARK, XINSHI TOWN, BAIYUN DISTRICT,
GUANGZHOU, China
Telephone............................... : 020-36409886
Fax.......................................... : 020-36409999

Factory................................... : GUANGZHOU ADS AUDIO SCIENCE & TECHNOLOGY CO., LTD.
Address................................... : SHIMA INDUSTRIAL PARK, XINSHI TOWN, BAIYUN DISTRICT,
GUANGZHOU, China
Telephone............................... : 020-36409886
Fax.......................................... : 020-36409999

Test Result Positive
The test report merely corresponds to the test sample.
It is not permitted to copy extracts of these test result without the written permission of the test laboratory.

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 3 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

Revision History
Revision Issue Date Revisions Revised By
00 2016-08-18 Initial Issue Gavin Liang

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 4 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

TABLE OF CONTENTS

Description Page
1. GENERAL INFORMATION ...................................................................................................... 7
1.1 Description of Device (EUT) ............................................................................................................ 7
1.2 Support equipment List..................................................................................................................... 7
1.3 External I/O Cable ............................................................................................................................. 7
1.4 Description of Test Facility ............................................................................................................... 8
1.5 Statement of The Measurement Uncertainty ................................................................................ 8
1.6 Measurement Uncertainty ................................................................................................................ 8
1.7 Description Of Test Modes .............................................................................................................. 8
2. TEST METHODOLOGY ............................................................................................................ 9
2.1 EUT Configuration ............................................................................................................................. 9
2.2 EUT Exercise ..................................................................................................................................... 9
3. SYSTEM TEST CONFIGURATION ...................................................................................... 10
3.1 Justification ....................................................................................................................................... 10
3.2 EUT Exercise Software .................................................................................................................. 10
3.3 Special Accessories ........................................................................................................................ 10
3.4 Block Diagram/Schematics ............................................................................................................ 10
3.5 Equipment Modifications ................................................................................................................ 10
3.6 Test Setup ........................................................................................................................................ 10
4. SUMMARY OF TEST RESULTS........................................................................................... 11
5. SUMMARY OF TEST EQUIPMENT ..................................................................................... 12
6. MAXMIUM OUTPUT POWER................................................................................................ 13
6.1 Limit ................................................................................................................................................... 13
6.2 Test Procedure ................................................................................................................................ 13
6.3 Test Configution............................................................................................................................... 14
6.4 Test Results ..................................................................................................................................... 14
7. MODULATION CHARACTERISTICS................................................................................... 15
7.1 Limit ................................................................................................................................................... 15
7.2 Test Procedure ................................................................................................................................ 15
7.3 Test Configution............................................................................................................................... 15
7.4 Test Results ..................................................................................................................................... 16
8. FREQUENCY TOLERANCE .................................................................................................. 20
8.1 Limit ................................................................................................................................................... 20
8.2 Test Configution............................................................................................................................... 20
8.3 Test Procedure ................................................................................................................................ 20
8.4 Test Results ..................................................................................................................................... 21
9. OPERATING BANDWIDTH ................................................................................................... 22
9.1 Limit ................................................................................................................................................... 22
9.2 Test Configution............................................................................................................................... 22
9.3 Test Procedure ................................................................................................................................ 22
9.4 Test Results ..................................................................................................................................... 23
10. UNWANTED RADIATION .................................................................................................... 24
10.1 Limit ................................................................................................................................................. 24
10.2 Test Configution ............................................................................................................................ 24
10.3 Test Procedure .............................................................................................................................. 25
10.4 Test Results of Conducted Emissions Mask ............................................................................ 26
10.5 Test Results of Radiated Emissions .......................................................................................... 27
This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 5 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

11. NECESSARY BANDWIDTH ................................................................................................ 28
11.1 Limit ................................................................................................................................................. 28
11.2 Test Configution ............................................................................................................................ 28
11.3 Instruments Setting ....................................................................................................................... 28
11.4 Test Procedures ............................................................................................................................ 29
11.5 Test Results ................................................................................................................................... 29
12. TEST SETUP PHOTOS OF THE EUT ............................................................................... 31
13. EXTERNAL PHOTOS OF THE EUT .................................................................................. 31
14. INTERNAL PHOTOS OF THE EUT.................................................................................... 31

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 6 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

1. GENERAL INFORMATION

1.1 Description of Device (EUT)

EUT : WIRELESS MICROPHONE

Model No. : W-1606D, W-1506D, W-1529D,W-1129D, W-1629D, W-1229D

Model Declaration : PCB board, structure and internal of these model(s) are
the same, So no additional models were tested

Test Model No.: : W-1606D

Frequency Range : 185.15~202.20MHz

Channel Number : 2 channels

Channel frequency : 185.15MHz, 202.20MHz

Modulation Type : FM

Emission Type : F3E

Antenna Gain : Integral antenna, 0 dBi (Max.)

Input Voltage : DC 3.0V by 2*AA battery

Voltage of End Point : DC 2.5V

1.2 Support equipment List
Manufacturer Description Model Serial Number Certificate
-- -- -- -- -

1.3 External I/O Cable
I/O Port Description Quantity Cable
-- -- --

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 7 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

1.4 Description of Test Facility
Site Description
EMC Lab. : CNAS Registration Number. is L4595.
FCC Registration Number. is 899208.
Industry Canada Registration Number. is 9642A-1.
VCCI Registration Number. is C-4260 and R-3804.
ESMD Registration Number. is ARCB0108.
UL Registration Number. is 100571-492.
TUV SUD Registration Number. is SCN1081.
TUV RH Registration Number. is UA 50296516-001

The test site is constructed and calibrated to meet the FCC
requirements in documents ANSI C63.4:2014.

1.5 Statement of the Measurement Uncertainty
The data and results referenced in this document are true and accurate. The reader is cautioned that there
may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was
calculated for all measurements listed in this test report acc. To CISPR 16 – 4 “Specification for radio
disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements”
and is documented in the LCS quality system acc. To DIN EN ISO/IEC 17025. Furthermore, component and
process variability of devices similar to that tested may result in additional deviation. The manufacturer has
the sole responsibility of continued compliance of the device.

1.6 Measurement Uncertainty
Test Item Frequency Range Uncertainty Note
9KHz~30MHz 3.10dB (1)
30MHz~200MHz 2.96dB (1)
Radiation Uncertainty : 200MHz~1000MHz 3.10dB (1)
1GHz~26.5GHz 3.80dB (1)
26.5GHz~40GHz 3.90dB (1)
Conduction Uncertainty : 150kHz~30MHz 1.63dB (1)
Power disturbance : 30MHz~300MHz 1.60dB (1)
(1). This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence
level using a coverage factor of k=2.

1.7 Description of Test Modes
WIRELESS MICROPHONE operates in the licensed Band at 185.15~202.20MHz. The EUT works in the
X-axis, Y-axis and Z-axis. The following operating modes were applied for the related test items. All test
modes were tested, only the result of the worst case was recorded in the report.

Frequency Range
Mode of Operations
(MHz)
185.15
FM
202.20
Radiated Emission
Test Mode Continuous Transmit

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 8 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

2. TEST METHODOLOGY
The tests documented in this report were performed in accordance with ANSI C63.4-2014, ANSI TIA/EIA 603,
FCC CFR 47 2.1046, 2.1047, 2.1049, 2.1051, 2.1053, 2.1055, 2.1057, 74.861.

2.1 EUT Configuration
The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions
requirement and operating in a manner that intends to maximize its emission characteristics in a continuous
normal application.

2.2 EUT Exercise
The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the
measurements.
According to its specifications, the EUT must comply with the requirements of the Section 74.861 under the
FCC Rules Part 74 Subpart H.

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 9 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

3. SYSTEM TEST CONFIGURATION

3.1 Justification
The system was configured for testing in a continuous transmits condition.

3.2 EUT Exercise Software
N/A.

3.3 Special Accessories
N/A.

3.4 Block Diagram/Schematics
Please refer to the related document.

3.5 Equipment Modifications
Shenzhen LCS Compliance Testing Laboratory Ltd. has not done any modification on the EUT.

3.6 Test Setup
Please refer to the test setup photo.

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 10 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

4. SUMMARY OF TEST RESULTS

Applied Standard: FCC Part 74 Subpart H
FCC Rules Description of Test Limit Result
(i)54-72, 76-88, and 174-216 MHz
bands: 50 mW EIRP
§74.861(e)(1) Maximum Output Power (ii)470-608 and 614-698: 250 mW Compliant
conducted power
(iii)600 MHz duplex gap: 20 mW EIRP
§74.861(e)(3) Frequency Modulation
Maximum deviation: ±75 kHz Compliant
§2.1047 Modulation Characteristics
§74.861(e)(4) Frequency Tolerance 0.005 percent Compliant

§74.861(e)(5) Operating Bandwidth Less than 200kHz Compliant
(i)50%~100% authorized bandwidth: At
least 25dB;
(ii)100%~250% authorized bandwidth:
§74.861(e)(6) Unwanted Emission At least 35dB; Compliant
(ii)More than 250% authorized
bandwidth: At least 43 + 10log10 (mean
output power in watts) dB;
Prefer to ETSI EN 300 422-1 v1.4.2
§74.861(e)(7) Necessary bandwidth Compliant
(2011-08) Section 8.3.1.2

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 11 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

6. MAXMIUM OUTPUT POWER

6.1 Limit
According to §74.861(e) (1), the power may not exceed the following values:
(i) 54-72, 76-88, and 174-216 MHz bands: 50 mW EIRP
(ii) 470-608 and 614-698: 250 mW conducted power
(iii) 600 MHz duplex gap: 20 mW EIRP

6.2 Test Procedure
1). EUT was placed on a 1.50 meter high non-conductive stand at a 3 meter test distance from the receive
antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT for emission
measurements. The height of receiving antenna is 1.50m. Detected emissions were maximized at each
frequency by rotating the EUT through 360° and adjusting the receiving antenna polarization. The radiated
emission measurements of all transmit frequencies in three channels (High, Middle, Low) were measured with
peak detector.
2). A log-periodic antenna or double-ridged waveguide horn antenna shall be substituted in place of the EUT.
The log-periodic antenna will be driven by a signal generator and the level will be adjusted till the same power
value on the spectrum analyzer or receiver. The level of the spurious emissions can be calculated through the
level of the signal generator, cable loss, the gain of the substitution antenna and the reading of the spectrum
analyzer or receiver.
3). The EUT is then put into continuously transmitting mode at its maximum power level during the test.Set
Test Receiver or Spectrum RBW=1MHz,VBW=1MHz, And the maximum value of the receiver should be
recorded as (Pr).
4). The EUT shall be replaced by a substitution antenna. In the chamber, a substitution antenna for the
frequency band of interest is placed at the reference point of the chamber. An RF Signal source for the
frequency band of interest is connected to the substitution antenna with a cable that has been constructed to
not interfere with the radiation pattern of the antenna. A power (PMea) is applied to the input of the substitution
antenna, and adjusts the level of the signal generator output until the value of the receiver reach the
previously recorded (Pr). The power of signal source (PMea) is recorded. The test should be performed by
rotating the test item and adjusting the receiving antenna polarization.
5). A amplifier should be connected to the Signal Source output port. And the cable should be connect
between the Amplifier and the Substitution Antenna. The cable loss (Pcl), the Substitution Antenna Gain (Ga)
and the Amplifier Gain (PAg) should be recorded after test.
The measurement results are obtained as described below:
Power (EIRP) =PMea- PAg - Pcl + Ga
6). this value is EIRP since the measurement is calibrated using an antenna of known gain (2.15 dBi) and
known input power.
7). ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP-2.15dBi.

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 13 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

8.4 Test Results

The data of frequency stability versus input voltage
Frequency Measured at Test Result
Test Frequency Frequency Error Limit
End Point Voltage
(MHz) (%) (%)
(MHz)
185.15 185.1514 0.00076 0.005 Pass
202.20 202.2035 0.00173 0.005 Pass
Note: Test environment temperature is 25℃

The data of frequency stability versus ambient temperature
Channel Frequency: 185.15MHz
Environment
Frequency Measured Limit
Temperature Frequency Error Test Result
with time Elapsed (%)
(℃) (%)
(MHz)
-30 185.1515 0.00081 0.005 Pass
-20 185.1511 0.00059 0.005 Pass
-10 185.1509 0.00049 0.005 Pass
0 185.1520 0.00108 0.005 Pass
10 185.1519 0.00103 0.005 Pass
20 185.1514 0.00076 0.005 Pass
30 185.1522 0.00119 0.005 Pass
40 185.1511 0.00059 0.005 Pass
50 185.1517 0.00092 0.005 Pass
The data of frequency stability versus ambient temperature
Channel Frequency: 202.20MHz
Environment
Frequency Measured Limit
Temperature Frequency Error Test Result
with time Elapsed (%)
(℃) (%)
(MHz)
-30 202.2041 0.00203 0.005 Pass
-20 202.2027 0.00134 0.005 Pass
-10 202.2037 0.00183 0.005 Pass
0 202.2034 0.00168 0.005 Pass
10 202.2029 0.00143 0.005 Pass
20 202.2031 0.00153 0.005 Pass
30 202.2045 0.00223 0.005 Pass
40 202.2033 0.00163 0.005 Pass
50 202.2042 0.00208 0.005 Pass
Note: Test input voltage is DC 3.0V

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 21 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

10.3 Test Procedure
During the measurement the EUT works with a 2.5 kHz tone signal.

10.3.1 Conducted Emission
Conducted RF measurements of the Unwanted Radiation were made to confirm that the EUT antenna port
conducted emissions meet the specified limit and to identify any spurious signals that require further
investigation or measurements on the radiated emissions site.
The transmitter output is connected to the spectrum analyzer. The resolution bandwidth is set to 1 kHz. The
video bandwidth is set to 3 kHz. The span is set to 1MHz

10.3.2 Radiated Emission
1). EUT was placed on a 1.50 meter high non-conductive stand at a 3 meter test distance from the receive
antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT for emission
measurements. The height of receiving antenna is 1.50m. Detected emissions were maximized at each
frequency by rotating the EUT through 360° and adjusting the receiving antenna polarization. The radiated
emission measurements of all transmit frequencies in three channels (High, Middle, Low) were measured
with peak detector.
2). A log-periodic antenna or double-ridged waveguide horn antenna shall be substituted in place of the EUT.
The log-periodic antenna will be driven by a signal generator and the level will be adjusted till the same power
value on the spectrum analyzer or receiver. The level of the spurious emissions can be calculated through the
level of the signal generator, cable loss, the gain of the substitution antenna and the reading of the spectrum
analyzer or receiver.
3). The EUT is then put into continuously transmitting mode at its maximum power level during the test.Set
Test Receiver or Spectrum RBW=1MHz,VBW=1MHz, And the maximum value of the receiver should be
recorded as (Pr).
4). The EUT shall be replaced by a substitution antenna. In the chamber, an substitution antenna for the
frequency band of interest is placed at the reference point of the chamber. An RF Signal source for the
frequency band of interest is connected to the substitution antenna with a cable that has been constructed to
not interfere with the radiation pattern of the antenna. A power (PMea) is applied to the input of the substitution
antenna, and adjust the level of the signal generator output until the value of the receiver reach the previously
recorded (Pr). The power of signal source (PMea) is recorded. The test should be performed by rotating the test
item and adjusting the receiving antenna polarization.
5). A amplifier should be connected to the Signal Source output port. And the cable should be connect
between the Amplifier and the Substitution Antenna. The cable loss (Pcl) ,the Substitution Antenna Gain (Ga)
and the Amplifier Gain (PAg) should be recorded after test.
The measurement results are obtained as described below:
Power(EIRP)=PMea- PAg - Pcl + Ga
6). This value is EIRP since the measurement is calibrated using an antenna of known gain (2.15 dBi) and
known input power.
7). ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP-2.15dBi.

Subrange Sweep time
RBW VBW
(GHz) (s)
0.00009~0.15 1KHz 3KHz 30
0.00015~0.03 10KHz 30KHz 10
0.03~1 100KHz 300KHz 10
1~3 1 MHz 3 MHz 2

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 25 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

10.5 Test Results of Radiated Emissions
Calculation: Limit (dBm)= EL-43-10lg (TP)
Notes: No emission found below 30MHz, EL is the emission level of the Output
Power expressed in dBm, TP=[10^(EL/10)]/1000 W.
Limit (dBm)=EL-43-10lg(TP) = -13dBm

Channel Frequency-185.15MHz
Ga Antenna
Frequency PMea Pcl Distance EIRP Limit Margin
Gain Polarization
(MHz) (dBm) (dB) (m) (dBm) (dBm) (dB)
(dB)
370.31 -25.68 3.22 3 8.12 -20.78 -13.00 -7.78 H
370.31 -27.34 3.22 3 8.12 -22.44 -13.00 -9.44 V
555.45 -24.30 3.41 3 8.10 -19.61 -13.00 -6.61 H
555.45 -27.06 3.41 3 8.10 -22.37 -13.00 -9.37 V
740.60 -27.29 3.44 3 8.21 -22.52 -13.00 -9.52 H
740.60 -28.94 3.44 3 8.21 -24.17 -13.00 -11.17 V

Channel Frequency-202.20MHz
Ga Antenna
Frequency PMea Pcl Distance EIRP Limit Margin
Gain Polarization
(MHz) (dBm) (dB) (m) (dBm) (dBm) (dB)
(dB)
404.44 -26.13 3.23 3 8.13 -21.23 -13.00 -8.23 H
404.44 -28.68 3.23 3 8.13 -23.78 -13.00 -10.78 V
606.62 -24.91 3.43 3 8.19 -20.15 -13.00 -7.15 H
606.62 -27.74 3.43 3 8.19 -22.98 -13.00 -9.98 V
808.83 -26.95 3.47 3 8.25 -22.17 -13.00 -9.17 H
808.83 -30.25 3.47 3 8.25 -25.47 -13.00 -12.47 V
Note:
1). All test modes have been tested and we only record the worst result.
2). Measuring frequencies from 9k~10th harmonic (ex. 3GHz), No emission found between lowest internal
used/generated frequency to 30 MHz.
2). Radiated emissions measured in frequency range from 9k~10th harmonic (ex. 3GHz) were made with an
instrument using Peak detector mode.

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 27 of 31

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVS-MIC-0001 Report No.: LCS1606060517E

12. TEST SETUP PHOTOS OF THE EUT

Please refer to separated files for Test Setup Photos of the EUT.

13. EXTERNAL PHOTOS OF THE EUT

Please refer to separated files for External Photos of the EUT.

14. INTERNAL PHOTOS OF THE EUT

Please refer to separated files for Internal Photos of the EUT.

-------------THE END OF REPORT-------------

This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.
Page 31 of 31

Document Created: 2016-11-10 21:42:45
Document Modified: 2016-11-10 21:42:45

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC