User_Manual

FCC ID: 2AHRH-FJ1000LS

Users Manual

Download: PDF
FCCID_4299540

                            FJ1000LS



FJ1000LS User Manual
                       Positioning Universal




                                               1


                                                               FJ1000LS




                                                                Contents


1 Introduction ....................................................................................................................3
   1.1ID and Tooling Design.......................................................................................................3
2 Hardware.........................................................................................................................3
   2.1 Physical and Electrical Specifications ..............................................................................3
   2.2 Input/Output...................................................................................................................3
   2.3 Cellular Communication...................................................................................................3
   2.4
   Harnesses.........................................................................................................................3
   2.5 Event Codes ....................................................................................................................4
   2.6 System network structure...............................................................................................5
   2.7 Appearance and installation instructions........................................................................5
3 USER MANUAL.................................................................................................................6
3.1INTRODUCTION...............................................................................................................6
   3.2List...................................................................................................................................6
3.3Description......................................................................................................................7




                                                                                                                                                 2


                                       FJ1000LS



  1.1 ID and Tooling Design
Dimensions: 80.5mm*52mm*18mm
Weight: 60g (with optional battery)
  2.1Physical and Electrical Specifications
Input Voltage: 7-30VDC
Power consumption:
- Active mode: 100mA @12VDC
- Sleep mode: <8mA @12VDC
Operating temperature: -30℃ to 80℃
Storage temperature: -40℃to 85℃
  2.2Input/Output
Download and debug port: 1
SWDInterface: 1
Function LEDs: 2


 2.3 Cellular Communication
Operation mode :LTE/GPS
Operation band :LTEB12/B25/B26;GPS 1.57542GHz
Modulation: QPSK/16QAM
 2.4 Harnesses
There are 3 harnesses that may be used with the FJ1000LS:
1. 4 wire power and I/O harness
2. 4 wire uart
3. 14 wire power and I/O harness
The picture as below.




                                                            3


                                                    FJ1000LS


          2.5 Event Codes
        The table below relates the Event codes in the message to the reason the message was
        generated:

Message #         Message Type                                          Description
   0                     Interval                         Auto Report (auto report when moving)
   1                    Vibration           Vibration alarm(report when GPS is OFF and vibration detected)
   2            Power Disconnect                 Power cut alarm (report when external power is cut off)
   3              Power Connect               Power connected alarm (external power has been connected)
   4                   Ignition ON                      Hardwired or Virtual Ignition ON detected
   5               Ignition OFF                         Hardwired or Virtual Ignition OFF detected
   6               Input 2 High                                      Input2 high alarm
   7                   Input 2 Low                                   Input2 low alarm
   8
   9
   10
   11
   12




        2.6 System network structure

        GPS alarm is currently the most advanced security Settings. GPS alarm more expensive than
        ordinary burglar alarm, and need to pay the additional service fee, so the popularity is not high.
        And alarm is based on a GPRS network communication network, combining with the intelligent
        linkage of mobile phone and car anti-theft, this kind of alarm alarm is not restricted by distance,
        overlay network is wide, but need to pay the monthly rental. Buying guide to edit GPS alarm
        when the choose and buy, need to pay attention to is the comparison of several common GPS
        performance.

        2.7 Appearance and installation instructions




            3.1 Introduction.
        This chapter is user manual for FJ1000LS.
            3.2List.
                                                                                                         4


                          FJ1000LS

1.One UART cables.




2.The FJ1000LS devices.




                                     5


                                      FJ1000LS




3.One DC 12V cable.




  3.3 Description.
1.Connect the UART cable to the UART interface of MCU on the device, the other side
connect to PC, you can communication to MCU with UART cable.




                                                                                  6


                                       FJ1000LS




2. Connect the DC 12V cable to the connector of J203 on the device, the other side
connect to DC 12V, you can use the DC 12v cable to supply power.




4. The other interfaces of the FJ1000LS device are shown in the following pictures.(The
   Modem UART 1 on device is for modem debug and update firmware).




                                                                                      7


                  FJ1000LS




 mcu download
 test point




GPS UART test point




                             8


                                            FJ1000LS




       NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

—Reorient or relocate the receiving antenna

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is
     connected.

—Consult the dealer or an experienced radio/TV technician for help.


This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.


Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.


Keep at least 20cm away from the unit when it works.




                                                                                                   9



Document Created: 2019-05-28 15:10:09
Document Modified: 2019-05-28 15:10:09

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC