User Manual

FCC ID: 2AHI6NIAEBT29

Users Manual

Download: PDF
FCCID_4171617

Wireless Earbuds User’s Guide for Model IAEB29 v2276-01 Features Battery Charging • Rubberized coating • Pull back the cover on the DC Power Input. • Sweat proof • Using a Micro-USB to USB cable, connect to • Bluetooth Wireless: range 33 ft. the USB port of a powered on computer or USB power adaptor (not included). • Active noise cancellation Initial charge time is approximately 2 hours. Charge • Built-in microphone fully before use. • Voice prompts announce earbud operations When the battery is low an indicator LED will flash • Digital volume control red for 1 minute and a voice will announce “Low • Built-in rechargeable battery: aprroximately 4 Battery,” then the unit will automatically power OFF. hrs playtime While the unit is charging it will display a solid red • Micro-USB port for battery recharge light. When the unit is fully charged it will display a Includes solid blue light. • 3 pairs of eartips: 1 small, 1 medium, 1 large • Micro-USB to USB charging cable FCC ID: 2AHI6NIAEBT29 Orientation & Controls (Right Earbud only) Volume / Skip Microphone Press and hold to adjust volume. Press to skip ahead or back. DC Power Input Power / Pair / Play / Pause / Speakerphone Press and hold to power ON or OFF. Indicator LED Press and hold for 9 seconds to power ON and pair Bluetooth. Press to play or pause audio. Press to answer incoming phone call.

Initial Bluetooth Connection Customer Support Customer Service: 1-888-999-4215 | Email Support: prodinfo@ 1. With the earbuds powered OFF, press and hold dpiinc.com | Email Parts: partsinfo@dpiinc.com until they power ON and the voice prompt For Warranty Information and the most up-to-date version of says “Power on...Bluetooth is connecting.” When this User’s Guide, go to www.iLiveElectronics.com pairing, remain within 3 feet of the Bluetooth To download this User’s Guide in English, Spanish, or French, or device. to get answers to frequently asked questions, visit the support 2. Using the controls on your Bluetooth device, section at: www.iLiveElectronics.com select IAEB29 in the Bluetooth Settings to pair. Para descargar este Manual del Usuario en inglés, español y If need be, refer to the user’s manual for your specific francés, o para obtener respuestas a preguntas frecuentes, device for more information. visite la sección de apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l’utilisateur en anglais, espagnol 3. When successfully paired, a voice will announce ou français, ou pour obtenir des réponses à des questions “Bluetooth is connected” and the LED indicator fréquemment posées, consultez la rubrique d’assistance sur: will blink twice every few seconds. Audio from www.iLiveElectronics.com the connected Bluetooth device will now be Copyright © 2019 Digital Products heard through the earbuds. Made International (DPI, Inc.) All other trademarks Green appearing herein are the property of their 4. Use the controls on the connected Bluetooth respective owners. Specifications are subject device to select and play audio. Use the earbud to change without notice. controls or the connected Bluetooth device to play, pause, and adjust the volume level. FCC Warnings 5. After initial pairing, press and hold until the WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the voice prompt says “Power on.” The earbuds user’s authority to operate the equipment. will power ON and automatically connect to the NOTE: This equipment has been tested and found to comply with Bluetooth device. the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Speakerphone equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 1. To accept a call, press the button, or use the controls may cause harmful interference to radio communications. However, on the connected phone. there is no guarantee that interference will not occur in a particular 2. To end a call, press the button, or use the controls on installation. If this equipment does cause harmful interference to the connected phone. radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 3. To re-dial the last dialed number, press the button interference by one or more of the following measures: twice. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. Previously Connected Devices • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • The earbuds can remember multiple Bluetooth • Consult the dealer or an experienced radio/TV technician for help. devices and will always try to re-connect to the last device used. Additional Warnings • To re-connect to a different device, turn off • WARNING: To prevent fire or shock hazards, do not expose this Bluetooth on unwanted devices, then access the unit to rain or moisture. Bluetooth settings menu on the device you wish • WARNING : Where the mains plug or appliance coupler is used to use and select IAEB29. as the disconnect device, such disconnect device shall remain readily operable. • Lithium batteries, like all rechargeable batteries, are recyclable Troubleshooting and should be recycled or disposed of according to state and local If the earbuds should become unpaired or will not guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might connect normally, follow these steps in your device’s explode. Contact your local government for disposal or recycling Bluetooth Settings Menu. practices in your area. • To avoid hearing damage, make sure that the volume on your 1. Delete the earbuds (“Forget This Device”). music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the 2. Turn Bluetooth OFF then ON again, and repeat volume until you reach a comfortable listening level. the Initial Bluetooth Connection steps. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations.


Document Created: 2019-02-15 10:42:11
Document Modified: 2019-02-15 10:42:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC