I19D00028-EMC01

FCC ID: 2AH25ND070

Test Report

Download: PDF
FCCID_4198941

TEST REPORT No. I19D00028-EMC01 For Client : Shanghai Sunmi Technology Co.,Ltd. Production: POS Base Model Name : ND070 Brand Name: SUNMI FCC ID: 2AH25ND070 Hardware Version: NA Software Version: NA Issued date: 2019-03-12

ReportNo.I19D00028-EMC01 NOTE 1. The test results in this test report relate only to the devices specified in this report. 2. This report shall not be reproduced except in full without the written approval of East China Institute of Telecommunications.. 3. The measurement uncertainty is not taken into account when deciding conformity, and the results of measurement (or the average of measurement results) are directly used as the criterion for the stating conformity. Test Laboratory: East China Institute of Telecommunications Add: 7-8F, G Area, No.668, Beijing East Road, Huangpu District, Shanghai, P. R. China Tel: +862163843300 FAX: +862163843301 E-Mail: welcome@ecit.org.cn East China Institute of Telecommunications Page Number : 2 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Revision Version Report Number Revision Date Memo I19D00028-EMC01 00 2019-03-12 Initial creation of test report East China Institute of Telecommunications Page Number : 3 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 CONTENTS 1. TEST LABORATORY ............................................................................................................... 6 1.1. TESTING LOCATION ............................................................................................................... 6 1.2. TESTING ENVIRONMENT ....................................................................................................... 6 1.3. PROJECT DATA ....................................................................................................................... 6 1.4. SIGNATURE.............................................................................................................................. 6 2. CLIENT INFORMATION ........................................................................................................... 7 2.1. APPLICANT INFORMATION.................................................................................................... 7 2.2. MANUFACTURER INFORMATION.......................................................................................... 7 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 8 3.1. ABOUT EUT.............................................................................................................................. 8 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST ....................................... 8 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ......................................... 8 4. REFERENCE DOCUMENTS.................................................................................................... 9 4.1. REFERENCE DOCUMENTS FOR TESTING .......................................................................... 9 5. TEST RESULTS...................................................................................................................... 10 5.1. SUMMARY OF TEST RESULTS ............................................................................................ 10 5.2. STATEMENTS......................................................................................................................... 10 6. TEST EQUIPMENTS UTILIZED ..............................................................................................11 6.1 RADIATED EMISSION EQUIPMENTS LIST .........................................................................11 6.2 AC CONDUCTED EMISSION EQUIPMENTS LIST ..............................................................11 7. SYSTEM CONFIGURATION DURING TEST......................................................................... 12 7.1 TEST MODE............................................................................................................................. 12 7.2 CONNECTION DIAGRAM OF TEST SYSTEM....................................................................... 13 8. MEASUREMENT RESULTS................................................................................................... 14 8.1 RADIATED EMISSION 30MHZ-18GHZ................................................................................... 14 East China Institute of Telecommunications Page Number : 4 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

2CIT

ECIT ReportNo. 119D00028—E MCO1 1. Test Laboratory 1.1. Testing Location Company Name: ECIT Shanghai, East China Institute of Telecommunications Address: 7F, G Area,No. 668, Beijing East Road, Huangpu District, Shanghai, P. R. China Postal Code: 200001 Telephone: 86—21—63843300 Fax: 86—21—63843301 FCC registration No: 958356 1.2. Testing Environment Normal Temperature: 15—35°C Relative Humidity: 30—60%RH 1.3. Project data Project Leader: Yu Anlu Testing Start Date: 2019—03—05 Testing End Date: 2019—03—08 1.4. Signature &+ % 144 Qin Yabin You Jinjun (Prepared this test report) {Reviewed this test report) Zheng Zhongbin {Approved this test report) East China Institute of Telecommunications Page Number : 6 of 23 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 2. Client Information 2.1. Applicant Information Company Name: Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Address : Shanghai, China Telephone: 86-18721763396 Postcode: 200433 2.2. Manufacturer Information Company Name: Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Address : Shanghai, China Telephone: 86-18721763396 Postcode: 200433 East China Institute of Telecommunications Page Number : 7 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ECIT ReportNo. 119D00028—E MCO1 3. Equipment under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT EUT Description POS Base Model name NDO70 3.2. Internal Identification of EUT used during the test EUT ID* SN or IMEI1 HW Version SW Version Date of receipt NO1 / N/A NA 2019—03—05 NOZ2 NFO1D91A00027 N/A NA 2019—03—07 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description Model SN CAQ1 Adapter TPA—23A0502000UUO01 / UAQ1 USB / / AE1 Keyboard KB212—B CN—OY88 XT—65890—121 —0050—A00 AE2 Mouse MS111—P CN—011D3V—71581—19 J—1A64 AE3 Wireless data POS T5921 / System *AE ID: is used to identify the test sample in the lab internally. East China Institute of Telecommunications Page Number : 8 of 23 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 4. Reference Documents 4.1. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC Part 15, Radio frequency devices 10-1-17 Edition Subpart B Method of Measurement of Radio-Noise Emissions from ANSI C63.4 Low-Voltage Electrical and Electronic Equipment in the 2014 Range of 9 kHz to 40 GHz East China Institute of Telecommunications Page Number : 9 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 5. Test Results 5.1. Summary of Test Results Items Test List Clause in FCC rules Verdict 1 Radiated Emission 15.109(a) Pass 2 AC Conducted Emission 15.107(a) Pass 5.2. Statements The ND070, manufactured by Shanghai Sunmi Technology Co.,Ltd. is a new product for testing. ECIT performed test cases which identified with Pass/Fail/Inc result in section 5.1. ECIT has verified that the compliance of the tested device specified in section 3 of this test report is successfully evaluated according to the procedure and test methods as defined in type certification requirement listed in section 4 of this test report. East China Institute of Telecommunications Page Number : 10 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 6. Test Equipments Utilized 6.1 Radiated Emission Equipments list Series Cal. No. Name Type Producer Cal. Date Number interval Universal Radio 1 CMU200 123126 R&S 2018-05-11 1 Year Communication Tester 2 Test Receiver ESU40 100307 R&S 2018-05-11 1 Year 3 Trilog Antenna VULB9163 VULB9163-515 Schwarzbeck 2017-02-25 3 Year Double Ridged 4 ETS-3117 00135890 ETS 2017-01-11 3 Year Guide EMI Antenna Test EMC32 5 NA R&S NA NA Software V9.15 6.2 AC Conducted Emission Equipments list Cal. No. Name Type Series Number Producer Cal. Date interval Universal 1 CMU200 123123 R&S 2018-05-11 1 Year Radio Communication 2 Test Receiver ESCI 101235 R&S 2018-05-11 1 Year Tester 2-Line 3 ENV216 101380 R&S 2018-05-11 1 Year V-Network EMI Test EMC32 4 NA R&S NA NA Software V10.35.02 East China Institute of Telecommunications Page Number : 11 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 7. System Configuration during Test 7.1 Test Mode Test Item Function Type AC Conducted Emission Mode 1: Charging mode+CA01+UA01+AE1+AE2+AE3<Figure 1> Mode 2: Charging mode+CA01+UA01+AE2+AE3<Figure 2> Radiated Emission Mode 1: Charging mode+CA01+UA01+AE1+AE2+AE3<Figure 1> Mode 2: Charging mode+CA01+UA01+AE2+AE3<Figure 2> Remark: 1. All test modes are performed, only the worst cases test data are recorded in this report. East China Institute of Telecommunications Page Number : 12 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 7.2 Connection Diagram of Test System POS EUT Keyboard Mouse Adapter <Figure 1> POS EUT Mouse Adapter <Figure 2> East China Institute of Telecommunications Page Number : 13 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ECIT ReportNo. 119D00028—E MCO1 8. Measurement Results Only the worst test result was shown in this report. 8.1 Radiated Emission 30MHz—18GHz Method of Measurement For 3OMHz —1000MHz, the EUT was placed on the top of a rotating 0.8—m table above the ground at a semi—anechoic chamber. The distance between the EUT and the received antenna was 3 meters. The table was rotated 360 degree and the received antenna mounted on a variable—height antenna tower was varied from 1im to 4m to find the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna were set during the measurement. Tested in accordance with the procedures of ANSI C63.4—2014, section 8.3. For 1000MHz—18000MHz, The maximal emission value was acquired by adjusting the antenna height, The table was rotated 360 degree to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna were set during the measurement. Limits for Radiated Emission at a measuring distance of 3m Frequency Range (MHz) Quasi—Peak (dBuV/m) 30—88 40 88—216 43.5 216—960 46 Above 960 54 Frequency Range (MHz) Peak (dBuV/im) Average (dBuV/im) Above 1000 74 54 Test conditions Frequency Range (MHz) RBW/VBW Sweep Time (s) 30—1000 120kHz/300kHz Auto 1000—18000 1MHz/3MHz Auto Uncertainty Measurement The measurement uncertainty is4.98dB (30MHz —1000MHz) and 5.06dB (1GHz 18GHz) (k=2) East China Institute of Telecommunications Page Number : 14 of 23 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Test Results Mode 1: Charging mode+CA01+UA01+AE1+AE2+AE3<Figure 1> Frequency Range: 30MHz – 1GHz Final_Result Frequency QuasiPeak Lim it Margin Meas. Bandw idth Height Pol Azimuth Corr. (MHz) (dBµV/m ) (dBµV/m ) (dB) Time (kHz) (cm) (deg) (dB) (ms) 34.693277 19.98 40.00 20.02 1000.0 120.000 100.0 V 154.0 -27.7 53.997832 30.14 40.00 9.86 1000.0 120.000 100.0 V 86.0 -26.2 78.588512 24.28 40.00 15.72 1000.0 120.000 175.0 V 134.0 -31.8 114.042512 25.56 43.50 17.94 1000.0 120.000 174.0 H 188.0 -28.3 156.031771 23.59 43.50 19.91 1000.0 120.000 223.0 H 92.0 -30.7 400.037539 30.76 46.00 15.24 1000.0 120.000 100.0 H 252.0 -24.0 Note: 1. Emission level(QP)=Raw value by receiver + Corr(Antenna factor + cable loss - preamplifier gain) 2. The raw value is used to calculate by software which is not shown in the sheet. 3. Margin=limit value – emission level. East China Institute of Telecommunications Page Number : 15 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Mode 1: Charging mode+CA01+UA01+AE1+AE2+AE3<Figure 1> Frequency Range: 1GHz –18GHz, Horizontal Final Result Frequency MaxPeak Average Lim it Margi Meas. Bandw idt Heigh Po Azim Corr. (MHz) (dBuV/m (dBuV/m (dBuV/m n Time h t l uth (dB) 14063.800000 ) --- 42.03 ) 54.00 ) 11.97 (dB) 100.0 (ms) 1000.000 (kHz) 100.0 (cm) H 194.0 (deg) 19.2 14063.800000 54.43 --- 74.00 19.57 100.0 1000.000 100.0 H 194.0 19.2 14651.800000 54.07 --- 74.00 19.93 100.0 1000.000 100.0 H 0.0 19.7 14651.800000 --- 41.91 54.00 12.09 100.0 1000.000 100.0 H 0.0 19.7 15212.400000 54.64 --- 74.00 19.36 100.0 1000.000 100.0 H 264.0 20.7 15212.400000 --- 42.69 54.00 11.31 100.0 1000.000 100.0 H 264.0 20.7 15704.800000 55.94 --- 74.00 18.06 100.0 1000.000 200.0 H 201.0 21.8 15704.800000 --- 43.77 54.00 10.23 100.0 1000.000 200.0 H 201.0 21.8 17004.200000 --- 45.01 54.00 8.99 100.0 1000.000 100.0 H 155.0 23.7 17004.200000 57.38 --- 74.00 16.62 100.0 1000.000 100.0 H 155.0 23.7 17788.200000 56.74 --- 74.00 17.26 100.0 1000.000 100.0 H 155.0 24.3 17788.200000 --- 44.66 54.00 9.34 100.0 1000.000 100.0 H 155.0 24.3 Note: 1. Emission level(peak or average)=Raw value by receiver + Corr (Antenna factor+ cable loss - preamplifier gain) 2. The raw value is used to calculate by software which is not shown in the sheet. 3. Margin=limit value – emission level. East China Institute of Telecommunications Page Number : 16 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Frequency Range: 1GHz –18GHz, Vertical Final Result Frequency MaxPeak Average Lim it Margin Meas. Bandw idt Heigh Po Azim Corr. (MHz) (dBuV/m (dBuV/m (dBuV/m (dB) Time h t l uth (dB) 14127.000000 ) --- 42.11 ) 54.00 ) 11.89 100.0 (ms) 1000.000 (kHz) 200.0 (cm) V 270.0 (deg) 19.3 14127.000000 54.62 --- 74.00 19.38 100.0 1000.000 200.0 V 270.0 19.3 14946.000000 54.51 --- 74.00 19.49 100.0 1000.000 100.0 V 0.0 20.2 14946.000000 --- 42.33 54.00 11.67 100.0 1000.000 100.0 V 0.0 20.2 15583.600000 --- 42.81 54.00 11.19 100.0 1000.000 100.0 V 187.0 21.2 15583.600000 54.90 --- 74.00 19.10 100.0 1000.000 100.0 V 187.0 21.2 16341.600000 56.05 --- 74.00 17.95 100.0 1000.000 200.0 V 342.0 22.8 16341.600000 --- 43.74 54.00 10.26 100.0 1000.000 200.0 V 342.0 22.8 17089.600000 --- 45.10 54.00 8.90 100.0 1000.000 200.0 V 75.0 24.0 17089.600000 57.70 --- 74.00 16.30 100.0 1000.000 200.0 V 75.0 24.0 17653.400000 --- 45.33 54.00 8.67 100.0 1000.000 100.0 V 358.0 24.4 17653.400000 57.67 --- 74.00 16.33 100.0 1000.000 100.0 V 358.0 24.4 Note: 1. Emission level(peak or average)=Raw value by receiver + Corr(Antenna factor+ cable loss - preamplifier gain) 2. The raw value is used to calculate by software which is not shown in the sheet. 3. Margin=limit value – emission level. East China Institute of Telecommunications Page Number : 17 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Mode 2: Charging mode+CA01+UA01+AE2+AE3<Figure 2> Frequency Range: 30MHz – 1GHz Final_Result Frequency QuasiPeak Lim it Margin Meas. Bandw idth Height Pol Azimuth Corr. (MHz) (dBµV/m ) (dBµV/m ) (dB) Time (kHz) (cm) (deg) (dB) (ms) 34.499056 21.97 40.00 18.03 1000.0 120.000 175.0 V 115.0 -27.7 37.556824 30.24 40.00 9.76 1000.0 120.000 100.0 V 259.0 -27.1 54.279059 23.76 40.00 16.24 1000.0 120.000 197.0 V 71.0 -26.3 84.530421 19.78 40.00 20.22 1000.0 120.000 125.0 V 267.0 -30.9 399.988581 29.41 46.00 16.59 1000.0 120.000 225.0 V 167.0 -24.0 456.010552 25.43 46.00 20.57 1000.0 120.000 100.0 H 266.0 -23.2 Note: 1. Emission level(QP)=Raw value by receiver + Corr(Antenna factor + cable loss - preamplifier gain) 2. The raw value is used to calculate by software which is not shown in the sheet. 3. Margin=limit value – emission level. East China Institute of Telecommunications Page Number : 18 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Mode 2: Charging mode+CA01+UA01+AE2+AE3<Figure 2> Frequency Range: 1GHz –18GHz, Horizontal Final Result Frequency MaxPeak Average Lim it Margi Meas. Bandw idt Heigh Po Azim Corr. (MHz) (dBuV/m (dBuV/m (dBuV/m n Time h t l uth (dB) 15134.200000 54.78 ) ) --- 74.00 ) 19.22 (dB) 100.0 (ms) 1000.000 (kHz) 100.0 (cm) H 203.0 (deg) 20.6 15134.200000 --- 42.43 54.00 11.57 100.0 1000.000 100.0 H 203.0 20.6 15657.400000 55.08 --- 74.00 18.92 100.0 1000.000 100.0 H 0.0 21.6 15657.400000 --- 43.19 54.00 10.81 100.0 1000.000 100.0 H 0.0 21.6 16055.000000 --- 44.26 54.00 9.74 100.0 1000.000 100.0 H 24.0 22.5 16055.000000 56.60 --- 74.00 17.40 100.0 1000.000 100.0 H 24.0 22.5 16764.800000 --- 44.57 54.00 9.43 100.0 1000.000 100.0 H 265.0 23.5 16764.800000 57.15 --- 74.00 16.85 100.0 1000.000 100.0 H 265.0 23.5 17077.800000 --- 45.03 54.00 8.97 100.0 1000.000 100.0 H 97.0 23.9 17077.800000 57.48 --- 74.00 16.52 100.0 1000.000 100.0 H 97.0 23.9 17310.200000 --- 44.81 54.00 9.19 100.0 1000.000 100.0 H 119.0 24.1 17310.200000 56.65 --- 74.00 17.35 100.0 1000.000 100.0 H 119.0 24.1 Note: 1. Emission level(peak or average)=Raw value by receiver + Corr(Antenna factor+ cable loss - preamplifier gain) 2. The raw value is used to calculate by software which is not shown in the sheet. 3. Margin=limit value – emission level. East China Institute of Telecommunications Page Number : 19 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Frequency Range: 1GHz –18GHz, Vertical Final Result Frequency MaxPeak Average Lim it Margin Meas. Bandw idt Heigh Po Azim Corr. (MHz) (dBuV/m (dBuV/m (dBuV/m (dB) Time h t l uth (dB) 14531.000000 ) --- 41.65 ) 54.00 ) 12.35 100.0 (ms) 1000.000 (kHz) 100.0 (cm) V 178.0 (deg) 19.2 14531.000000 54.73 --- 74.00 19.27 100.0 1000.000 100.0 V 178.0 19.2 15578.200000 --- 42.88 54.00 11.12 100.0 1000.000 100.0 V 147.0 21.2 15578.200000 54.96 --- 74.00 19.04 100.0 1000.000 100.0 V 147.0 21.2 16005.200000 57.33 --- 74.00 16.67 100.0 1000.000 100.0 V 64.0 22.3 16005.200000 --- 44.35 54.00 9.65 100.0 1000.000 100.0 V 64.0 22.3 16304.000000 --- 43.84 54.00 10.16 100.0 1000.000 100.0 V 95.0 22.7 16304.000000 56.17 --- 74.00 17.83 100.0 1000.000 100.0 V 95.0 22.7 17055.200000 --- 44.85 54.00 9.15 100.0 1000.000 200.0 V 54.0 23.9 17055.200000 56.93 --- 74.00 17.07 100.0 1000.000 200.0 V 54.0 23.9 17459.600000 56.77 --- 74.00 17.23 100.0 1000.000 100.0 V 84.0 24.3 17459.600000 --- 44.41 54.00 9.59 100.0 1000.000 100.0 V 84.0 24.3 Note: 1. Emission level(peak or average)=Raw value by receiver + Corr(Antenna factor+ cable loss - preamplifier gain) 2. The raw value is used to calculate by software which is not shown in the sheet. 3. Margin=limit value – emission level. East China Institute of Telecommunications Page Number : 20 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 8.2 AC Conducted Emission Method of Measurement For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies with the band 150 kHz to 30MHz shall not exceed the limits. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. Tested in accordance with the procedures of ANSI C63.4-2014, section 7.3 Limit of AC Conducted Emission Frequency Range (MHz) Conducted Limit (dBuV) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency Test Condition in Charging Mode Voltage (V) Frequency (Hz) RBW Sweep Time (s) 120 60 9 kHz Auto Uncertainty Measurement The measurement uncertainty is 3.66dB (k=2). Test Results East China Institute of Telecommunications Page Number : 21 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Mode 1: Charging mode+CA01+UA01+AE1+AE2+AE3<Figure 1> Frequency Range: 150kHz – 30MHz Frequency QuasiPeak Average Lim it Margin Meas. Bandw idth Line Filter Corr. (MHz) (dBμ V) (dBμ V) (dBμ V) (dB) Time (kHz) (dB) 0.657450 --- 42.58 46.00 3.42 15000. (ms) 9.000 L1 ON 9.7 0.657450 53.24 --- 56.00 2.76 15000.0 9.000 L1 ON 9.7 0.676106 --- 41.09 46.00 4.91 15000.0 9.000 L1 ON 9.7 0.676106 52.00 --- 56.00 4.00 15000.0 9.000 L1 ON 9.7 1.332806 --- 34.19 46.00 11.81 15000.0 9.000 L1 ON 9.7 1.332806 44.61 --- 56.00 11.39 15000.0 9.000 L1 ON 9.7 11.000475 --- 33.81 50.00 16.19 15000.0 9.000 L1 ON 9.9 11.000475 46.20 --- 60.00 13.80 15000.0 9.000 L1 ON 9.9 12.261638 --- 33.55 50.00 16.45 15000.0 9.000 L1 ON 9.9 12.261638 46.86 --- 60.00 13.14 15000.0 9.000 L1 ON 9.9 12.500438 --- 32.26 50.00 17.74 15000.0 9.000 L1 ON 9.9 12.500438 45.12 --- 60.00 14.88 15000.0 9.000 L1 ON 9.9 Note: 0 1. Emission level(quasi-peak or Average peak)=Raw value by receiver + Corr(Insertion loss+ cable loss) 2. The raw value is used to calculate by software which is not shown in the sheet. 3. Margin=limit value – emission level. 4. L1 and N line is all have been tested, the result of them is synthesized in the above data diagram. East China Institute of Telecommunications Page Number : 22 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019

ReportNo.I19D00028-EMC01 Mode 2: Charging mode+CA01+UA01+AE2+AE3<Figure 2> Frequency Range: 150kHz – 30MHz Frequency QuasiPeak Average Lim it Margin Meas. Bandw idth Line Filter Corr. (MHz) (dBμ V) (dBμ V) (dBμ V) (dB) Time (kHz) (dB) 0.564169 --- 25.81 46.00 20.19 15000. (ms) 9.000 L1 ON 9.7 0.564169 41.62 --- 56.00 14.38 15000.0 9.000 L1 ON 9.7 0.649988 --- 37.68 46.00 8.32 15000.0 9.000 L1 ON 9.7 0.649988 49.07 --- 56.00 6.93 15000.0 9.000 L1 ON 9.7 0.683569 --- 39.51 46.00 6.49 15000.0 9.000 L1 ON 9.7 0.683569 49.47 --- 56.00 6.53 15000.0 9.000 L1 ON 9.7 11.884781 --- 31.21 50.00 18.79 15000.0 9.000 L1 ON 9.9 11.884781 43.02 --- 60.00 16.98 15000.0 9.000 L1 ON 9.9 12.366113 --- 31.84 50.00 18.16 15000.0 9.000 L1 ON 9.9 12.366113 44.84 --- 60.00 15.16 15000.0 9.000 L1 ON 9.9 12.757894 --- 31.14 50.00 18.86 15000.0 9.000 L1 ON 9.9 12.757894 43.11 --- 60.00 16.89 15000.0 9.000 L1 ON 9.9 Note: 0 1. Emission level(quasi-peak or Average peak)=Raw value by receiver + Corr(Insertion loss+ cable loss) 2. The raw value is used to calculate by software which is not shown in the sheet. 3. Margin=limit value – emission level. 4. L1 and N line is all have been tested, the result of them is synthesized in the above data diagram. **********END OF REPORT********** East China Institute of Telecommunications Page Number : 23 of 23 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Mar.12, 2019


Document Created: 2019-03-12 10:21:50
Document Modified: 2019-03-12 10:21:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC