2AEZA-DI2018

FCC ID

Equipment: SMART HUB CAMERA

GUANGZHOU BOSMA TECHNOLOGY CO.,LTD -DI2018

Floor 2nd, Building A5, No.11, Kaiyuan Avenue, Guangzhou Hi-tech Industrial Development Zone, Guangzhou, N/A N/A China

Application
Frequency Range
Final Action Date
Granted
72Tc8JmonUQoC9JMPgCfIw==
915.0-915.0
2018-09-14
APPROVED
I/3pii8Zbdcm+2Wct4p+qg==
2402.0-2480.0
2018-09-14
APPROVED
I/3pii8Zbdcm+2Wct4p+qg==
2412.0-2462.0
2018-09-14
APPROVED
I/3pii8Zbdcm+2Wct4p+qg==
2422.0-2452.0
2018-09-14
APPROVED
File NameDocument TypeDateDirect
Test ReportTest Report 2018-09-14 00:00:00 pdf
Test setup photosTest Setup Photos 2018-09-14 00:00:00 pdf
Internal PhotosInternal Photos 2018-09-14 00:00:00 pdf
External PhotosExternal Photos 2018-09-14 00:00:00 pdf
Users ManualUsers Manual 2018-09-14 00:00:00 pdf
LabelID Label/Location Info 2018-09-14 00:00:00 pdf
Confidentially LetterCover Letter(s) 2018-09-14 00:00:00 pdf
Authorization LetterCover Letter(s) 2018-09-14 00:00:00 pdf
Test reportTest Report 2018-09-14 00:00:00 pdf
RF Exposure InfoRF Exposure Info 2018-09-14 00:00:00 pdf
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentSMART HUB CAMERA
FRN0024653610
Grantee Code2AEZA
Product Code-DI2018
Applicant BusinessGUANGZHOU BOSMA TECHNOLOGY CO.,LTD
Business AddressFloor 2nd, Building A5, No.11, Kaiyuan Avenue, Guangzhou Hi-tech Industrial Development Zone, Guangzhou,N/A China
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]
ApplicantXingguo Dai –
Applicant Phone
Applicant Fax020-32203099
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS-CSTC Standards Technical Services Co., Ltd.
Test Firm ContactJerry Chan
Test Firm Phone
Test Firm Fax86 (0) 20 82075059
Test Firm Email[email protected]
Certified ByKobe Jian – Manager
Comment [I/3pii8Zbdcm+2Wct4p+qg==]: Power Output listed is conducted. Device is an 802.11b/g/n device and enabled for 2.4GHz band as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC