User Manual

FCC ID: 2AEUPBHASC051

Users Manual

Download: PDF
FCCID_3969320

155mm 140mm Stick Up Cam Wired 2520AH710L-B01FX Stick_Up_Cam_Wired_MANUAL.indd 1 7/30/18 6:21 PM

1. Set up your Download the Ring app. The app walks you through setting up and managing Stick Up Cam Wired your Stick Up Cam Wired. Search for “Ring” in one of the app stores below, or in the Ring app. visit: ring.com/app Download from Windows Store Grab your Wi-Fi password. You’ll need it to set up your Stick Up Cam. Write it down below so it’s handy when you need it: Your Wi-Fi password 2 3 Stick_Up_Cam_Wired_MANUAL.indd 2-3 7/30/18 6:21 PM

Plug in your Set up your Stick Up Stick Up Cam. Cam in the Ring app. Begin the setup process in In the Ring app, select Set the same room as your Wi-Fi Up a Device. router. You can move it to its When prompted, select Stick intended position later. Up Cam Wired and follow Stick Up Cam Elite First, slide off the bottom cover. the in-app instructions. Stick Up Cam Battery Then, plug your Stick Up Cam Try it out! Spotlight Cam Wired into a power outlet using the included USB cable and power After setup, tap the Live View supply. button in the Ring app to Spotlight Cam Battery see live video from your Stick Up Cam. Blue light flashing? If you’ll be connecting Stick Up Cam using If the light on the front of your Stick Up Cam Wired flashes Power Over Ethernet, then use an ethernet after setup, it may be updating its software. cable to connect it to a PoE port. When the flashing stops, Stick Up Cam is ready to use. 4 5 Stick_Up_Cam_Wired_MANUAL.indd 4-5 7/30/18 6:21 PM

2. Install your Choose a location. Stick Up Cam Wired is happy just about anywhere, indoors Stick Up Cam Wired. or out. It can sit on its own stand, or mount to a wall or ceiling. Choose a spot where it can provide the view you want, within reach of a power outlet or an Ethernet port with PoE. Installing on a shelf or table? Simply attach the base cover to the top of the base, and push the rubber pad into the bottom of the base. That’s it! You can skip to the next section. 6 7 Stick_Up_Cam_Wired_MANUAL.indd 6-7 7/30/18 6:21 PM

Mounting on a wall? Mounting on a ceiling? Push the rubber pad Flip the base toward Swivel the base Push the rubber pad into the top of the the rear. above the camera. into the base. base. Drive the screws. Drive the screws. Hold the circular part of the base against Hold the circular part of the base your wall, rubber-side down. Use the against your ceiling, rubber-side down. integrated level to ensure it’s straight. Then, mount it with the Then, mount it with the included screws. included screws. Finally, snap the cover onto the base Finally, snap the cover onto the base and install the security screw. and install the security screw. 8 9 Stick_Up_Cam_Wired_MANUAL.indd 8-9 7/30/18 6:21 PM

You’re almost done! Now, just plug your Stick 3. Need a little setup help? Up Cam back in at its final installed location, and it’ll be ready to protect you. If using USB: Plug the included USB power supply and cable If your in-app setup doesn’t Need additional help? go as planned, try these tips: If the problem you’re having into an outlet. Feed the other end through the bottom cover isn’t addressed here, and of your Stick Up Cam and plug Get your Wi-Fi password you need further help, scan it in. just right. the code below with the The most common setup camera app on your iPhone If using Ethernet: Plug an issues come from entering or a QR code scanning app Ethernet cable into a Power the wrong Wi-Fi password. on your Android device. over Ethernet (PoE) port. Feed These passwords are case- the other end through the sensitive, and every little bottom cover of your Stick error counts. Up Cam and plug it in. If your Ethernet port does not provide Reboot your router. PoE, connect both Ethernet If you entered the right and the USB power supply. password but you’re having Then, slide the bottom cover back into place over the cable no luck, try turning your Wi-FI connections and use the star-shaped screwdriver bit to router off, wait 30 seconds, tighten the security screw. then turn it back on. Once your Stick Up Cam powers up, it reconnects to the Then, begin setup again in internet automatically. the Ring app. 10 11 Stick_Up_Cam_Wired_MANUAL.indd 10-11 7/30/18 6:21 PM

For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2018 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 07/30/18 12 2520AH710L-B01FX Stick_Up_Cam_Wired_MANUAL.indd 12 7/30/18 6:21 PM

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps CAN ICES-3 (B)/NMB-3(B)


Document Created: 2018-08-13 17:39:08
Document Modified: 2018-08-13 17:39:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC