5W21S8_User manual

FCC ID: 2AEUPBHAFM001

Users Manual

Download: PDF
FCCID_4233715

Beams Wired Floodlight

1. Install your Floodlight. With power turned off at the breaker, Center the mounting plate over the bracket screw the mounting and secure it with a bracket into your screw. electrical box. Be sure to pull the wires through the hole in the mounting plate WARNING: Risk of Always follow code standards. before screwing it in. electrical shock. Disconnect power If you are outside of North at the fuse or America, installation and circuit breaker wiring must be performed by a before installing. licensed electrician. Verify that the supply voltage CAUTION: Risk of fire. Do not is correct. Connect fixture to install near combustible or a 100 VAC~240 VAC 50/60 Hz flammable surfaces. power source. NOTICE: Floodlight must Properly ground fixture. be installed on a UL listed weatherproof electrical box. 2 3

Connect the ground wire. Connect the power wires. Connect the copper wire Use a wire nut to connect from your Floodlight to the the white wire from your green ground screw on Floodlight to the white the plate and the existing (neutral) wire coming ground wire from your from your electrical box. junction box. Connect the black wire Use one of the supplied from your Floodlight to wire nuts if necessary. the black (hot) wire from For easier wiring, you can hang your electrical box using your Floodlight from the plate with the included hook. another wire nut. 4

Slide your Floodlight over the posts on the Your Floodlight mounting plate. is versatile. Then, secure it with two Loosen the large knob of the long screws. at the top to adjust the angle of the lights. Once your Floodlight is mounted, feel free to Tighten it again when switch power back on at you find just the right the breaker. position. The motion sensor is adjustable. Try various angles to find the best setting for your home. 6

2. C  onnect your Set up your Ring Beams Bridge. Wired Floodight. The Bridge connects your Ring Beams lights to the rest of your Ring system. Your Bridge must be up and running before you set Download the Ring app. up your Floodlight. Download from The app walks you through setting Windows Store up and managing your Floodlight. To set up your Bridge, follow the instructions Download from Search for “Ring” in one of these Windows Store in the Ring app or app stores, or visit: ring.com/app Bridge user manual. 8 9

Set up your Got a Spotlight Cam Wired? Floodlight in the Upgrade it! Ring app. First, turn power off at the breaker. In the app, tap Twist the sensor on your Floodlight Doorbells Set Up a Device. to the left, then remove it. Do the Security Cams When prompted, select Chimes same to separate Spotlight Cam Beams and follow the in- Beams from its base. app instructions. Alarm Next, insert the camera into your Floodlight and twist it right to lock it in. Add the security screw, if desired. Finally, turn power on. Now your Spotlight Cam Wired has Floodlight powers, and vice versa. 10 11

For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2018 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 09/13/18

Warnings This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential This device complies with part 15 of the FCC Rules and installation. This equipment generates, uses and can Industry Canada licence-exempt RSS standard(s). Opera- radiate radio frequency energy and, if not installed and tion is subject to the following two conditions: (1) this used in accordance with the instructions, may cause device may not cause interference, and (2) this device must harmful interference to radio communications. However, accept any interference, including interference that may there is no guarantee that interference will not occur in a cause undesired operation of the device. particular installation. If this equipment does cause harmful Le présent appareil est conforme aux CNR d'Industrie interference to radio or television reception, which can be Canada applicables aux appareils radio exempts de determined by turning the equipment off and on, the user licence. L'exploitation est autorisée aux deux conditions is encouraged to try to correct the suivantes : (1) l'appareil ne doit pas produire de brouillage, interference by one or more of the following measures: et (2) l'utilisateur de l'appareil doit accepter tout brouillage • Reorient or relocate the receiving antenna. radioélectrique subi, même si le brouillage est susceptible • Increase the separation between the equipment and d'en compromettre le fonctionnement. receiver. • Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected. de moin de 20 cm. Installer les antennes de facon à ce que • Consult the dealer or an experienced radio/TV technician le personnel ne puisse approcher à 20 cm ou moins de la for help. position centrale de l’ antenne. Caution: Any changes or modifications to this device not La FCC des éltats-unis stipule que cet appareil doit être en explicitly approved by manufacturer could void your tout temps éloigné d’au moins 20 cm des personnes authority to operate this equipment. pendant son functionnement. MPE Reminding To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installées doivent être situées de facon à ce que la population ne puisse y être exposée à une distance


Document Created: 2018-12-31 11:16:07
Document Modified: 2018-12-31 11:16:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC