Users Manual

FCC ID: 2AE8BFZB561011A

Users Manual

Download: PDF
FCCID_2751111

FZB5610 ZigBee Module User Manual V1.00

VERSIONS HISTORY Versions Date Description Mender V1.00 Aug.18.2015 First release Daniel 1

Contents VERSIONS HISTORY..................................................................................................................... 1 1 Product Introduction...................................................................................................................3 1.1 Product Description........................................................................................................ 3 1.2 Product Figures...............................................................................................................3 1.3 Applications......................................................................................................................4 1.4 Product Features............................................................................................................ 4 2 Electrical Characteristics...........................................................................................................5 2.1 Hardware Specification..................................................................................................5 2.2 Absolute Maximum Ratings.......................................................................................... 5 2.3 Recommended Operating Conditions.........................................................................6 2.4 Recommended Output Power Setting........................................................................ 6 2.5 Power Characteristics.................................................................................................... 7 2.6 Temperature Characteristics.........................................................................................7 2.7 SPI AC Characteristics.................................................................................................. 8 2.8 DC Characteristics..........................................................................................................9 2.9 RF Frequency,Output Levels and Data Rates.........................................................10 3 Terminal Configuration And Functions..................................................................................11 3.1 Pin Assignments........................................................................................................... 11 3.2 Pin Attributes..................................................................................................................11 3.2.1 ZigBee Transmission Module..........................................................................11 3.2.2 ZLL Module........................................................................................................ 12 3.2.3 Curtain Module.................................................................................................. 13 3.2.4 Light Sensor Module.........................................................................................13 3.2.5 Infrared Human Body Sensor Module...........................................................14 3.2.6 Switch Module................................................................................................... 15 3.2.7 Smart Plug Module........................................................................................... 16 3.2.8 Temperature and Humanity Sensor Module.................................................17 4 Reference Information.............................................................................................................18 4.1 Electrical Schematic Diagram.................................................................................... 18 4.2 Design Considerations................................................................................................ 18 5 IEEE 802.15.4.......................................................................................................................... 19 6 The ZigBee Protocol................................................................................................................19 7 Mechanical Drawings And Installation..................................................................................20 FCC compliance.............................................................................................................................22 COPYRIGHT STATEMENT..........................................................................................................23 DISCLAIMER.................................................................................................................................. 23 TRADEMARK STATEMENT.........................................................................................................23 Contact us....................................................................................................................................... 23 2

1 Product Introduction 1.1 Product Description The FZB5610 ZigBee module is a compact surface-mounted modules specially designed for IEEE 802.15.4 and ZigBee applications.It enables robust network nodes to be built with very low total bill-of -material costs.The FZB5610 ZigBee module combines the excellent performance of a leading RF transceiver with an industry-standard enhanced 8051MCU,in -system programmable flash memory 8-KB RAM,and many other powerful features.The FZB5610 ZigBee module has 256KB flash memory and various operating modes,making it highly suited for systems where ultra low power consumption is required. Short transition times between operating modes further ensure low energy consumption. Combined with the industry-leading and golden-unit-status ZigBee protocol stack(Z-Stack )from Texas Instruments,the FZB5610 ZigBee modules provides arobust and complete ZigBee solution. Specification of FZB5610 ZigBee module as shown as table 1-1. Table 1-1 Specification of FZB5610 ZigBee module Specification Parameter Weight 5 g(including antenna) Dimensions（depth×width×height） 15mm×28mm×2mm 1.2 Product Figures Front side and Back side of FZB5610 ZigBee module as shown as figure 1-1 and figure 1-2. 3

Figure 1-1 FZB5610 Front Side Figure 1-2 FZB5610 Back Side 1.3 Applications  2.4-GHz IEEE 802.15.4 Systems  RF4CE Remote Control Systems(64-KB Flash and Higher)  ZigBee Systems(255-KB Flash)  Home/Building Automation  Lighting Systems  Industrial Control and Monitoring  Low-Power Wireless Sensor Networks  Consumer Electronics  Health Care 1.4 Product Features  Follow IEEE802.15.4 Standard.  High power consumption of the processor.  Integrate with 2.4G low power consumption of transceiver.  Use UART communication,and support to upgrade software by UART.  Voltage supply 2.0V-3.6V.  Conform to CE authentication.  Conform to ZigBee Standard,support ZLL and ZHA.  Support Ceramic Antenna or I-PEX Antenna(according to the model type)  Hardware compatibility design of the front-end amplifier circuit(according to the model type)  The circuit outside the antenna should be shield by metal. 4

2 Electrical Characteristics 2.1 Hardware Specification FZB5610 specification as shown as table 2-1. Table 2-1 FZB5610 Specification Performances Specification Operating Frequency Band 2405~2480MHz Transmitted Power 4dBm Outdoor Accessible Communication Range 200m Outdoor Accessible Network Range 100m Receiver Sensitivity -97dBm Working Temperature -40℃ ～ + 125℃ Supply Voltage +2.0V ～ +3.6V（Recommend Value:+3.3V） Standby Current 10mA (Non-sleeping) 1mA (PM1) 10µA (PM2) 1µA (PM3) Operating Current 35mA(TX) 25mA(RX) Modulation type of RF module QPSK Protocol ZigBee HA/ZigBee Light Link 2.2 Absolute Maximum Ratings Absolute maximum ratings of FZB5610 as shown as table 2-2. Table 2-2 FZB5610 absolute maximum ratings Parameter Parameter Description MIN MAX UNIT Ts Storage temperature range -40 125 ℃ Vi Input/Output signal voltage in any pin -0.3 3.9 V Iin IO port input power - 100 mA VESD Electrostatic voltage -2000 2000 V 5

2.3 Recommended Operating Conditions The recommended operating conditions of FZB5610 as shown as table 2-3. Table 2-3 FZB5610 recommended operating conditions Parameter Parameter Description Min Max UNIT TA Operating environment temperature -40 125 ℃ VIH High-level input voltage 1.85 3.14 V VIL Low-level input voltage -0.3 0.9 V VOH High-level output voltage 2.4 3．3 V VOL Low-level output voltage 0 0.4 V Io Output current 4 mA 2.4 Recommended Output Power Setting The recommended output power setting of FZB5610 as shown as table 2-4. Table 2-4 FZB5610 recommended output power setting TXPOWER Register Setting Typical Output Power(dBm) Typical Current Consumption(mA) 0xF5 4 34 0xE5 2 31 0xD5 0.5 29 0xC5 -1 28 0xB5 -2 27 0xA5 -3.5 27 0x95 -4.5 26 0x85 -6.5 26 0x75 -8.5 25 0x65 -10.5 25 0x55 -12.5 25 0x45 -14.5 25 0x35 -16.5 25 0x25 -18.5 24 0x15 -20.5 24 0x05 -22.5 23 0x05 and TXCTRL=0x09 -28.5 23 6

2.5 Power Characteristics Power characteristics of FZB5610 as shown as table 2-5 Table 2-5 FZB5610 Power Characteristics Parameter MIN TYP MAX UNIT VDD 2.0 3.3 3.6 V 2.6 Temperature Characteristics The relationship between output power and frequency as shown as figure 2-1. Figure 2-1 OUTPUT POWER VS FREQUENCY Figure 2-2 SENSITIVITY VS FREQUENCY The relationship between sensitivity and temperature as shown as figure 2-2. The relationship between output power and temperature as shown as figure 2-3. Figure 2-3 OUTPUT POWER VS TEMPERATURE 7

2.7 SPI AC Characteristics (ref CC2530 datasheet) TA = –40°C to 125°C, VDD = 2 V to 3.6 V, unless otherwise noted.See table 2-6. Table 2-6 SPI AC Characteristics PARAMETER TEST CONDITIONS MIN TYP MAX UNIT t1 SCK penod Master,Rx and Tx 250 ns SCK duty cycle Master 50% t2 SSN low to SCK Master 63 ns t3 SCK to SSN high Master 63 ns t4 MO early out Master,load= 10 pF 7 ns t7 MO late out Master,load 10 = pF 10 ns t6 MI setup Master 90 ns t5 MI hold Master 10 ns t1 SCK penod Stave,Rx and Tx 250 ns SCK duty cycle Stave 50% t2 SSN low to SCK Stave 63 ns t3 SCK to SSN high Stave 63 ns t6 MO setup Stave 35 ns t5 MO hold Stave 10 ns t5 MI late out Stave,load = 10 pF 95 ns Operating frequency Master,Tx only 8 MHz Master,Rx and Tx 4 Stave,Rx only 8 Stave,Rx and Tx 4 8

Figure 2-4 SPI AC Characteristics 2.8 DC Characteristics TA = 25°C, VDD = 3 V, unless otherwise noted. See table 2-7. Table 2-7 DC Characteristics PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Logic-0 input voltage 0.5 V Logic-1 input voltage 2.5 V Logic-0 input current Input equals 0V -50 50 nA Logic-1 input current Input equals VDD -50 50 nA I/O-pin pullup and pull down resistors 20 kΩ Logic-0 output voltage,4-mA pins Output load 4 mA 0.5 V Logic-1 output voltage,4-mA pins Output load 4 mA 2.4 V Logic-0 output voltage,20-mA pins Output load 20 mA 0.5 V Logic-1 output voltage,20-mA pins Output load 20 mA 2.4 V 9

2.9 RF Frequency,Output Levels and Data Rates The following table shows the RF channels as defined by the IEEE 802.15.4 standard. See table 2-8. Table 2-8 RF channels RF channel Frequency 11 2405MHz 12 2410MHz 13 2415MHz 14 2420MHz 15 2425MHz 16 2430MHz 17 2435MHz 18 2440MHz 19 2445MHz 20 2450MHz 21 2455MHz 22 2460MHz 23 2465MHz 24 2470MHz 25 2475MHz 26 2480MHz For proprietary solutions (non-IEEE 802.15.4), the RF transceiver can be programmed in steps of 1 MHz. The RF transceiver uses direct sequence spread spectrum (DSSS) with 2 Mchip/s chip rate, giving a raw data rate of 250 kbit/s. The modulation format is Offset– Quadrature Phase Shift Keying (O-QPSK).The DSSS makes the communication link robust in noisy environments, which is beneficial when sharing the same frequency band with other applications. 10

3 Terminal Configuration And Functions 3.1 Pin Assignments Pin assignments of FZB5610 ZigBee module as shown as Figure 3-1. Figure 3-1 FZB5610 Module 3.2 Pin Attributes 3.2.1 ZigBee Transmission Module Use FZB5610 ZigBee module as transmission module,the pin attributes as shown as table 3-1. Table 3-1 Pin attributes of ZigBee Transmission Module(Corresponding Type:FZB5610-IR01-HA) Pin number Name I/O Description 1 VDD Power（+3.3V） 2 KEY I FAC_NEW button 3 Nc. 4 GND. Ground 5 Nc. 6 Nc. 7 Nc. 8 Status LED O State LED 9 Tx O Serial ports send Tx 10 Rx I Serial ports receive Rx 11 Nc. 11

Pin number Name I/O Description 12 Nc. 13 GND. Ground 14 RESETn I System RESET signal,active low 15 DC I DEBUG port,leave unconnected 16 DD I/O DEBUG port,leave unconnected 17 VDD I Power（+3.3V） 3.2.2 ZLL Module Use FZB5610 ZigBee module as transmission module,the pin attributes as shown as table 3-2. Table 3-2 Pin attributes of ZLL Module(Corresponding Type:FZB5610 -CW02-ZLL（RGB） /FZB5610-BW01-ZLL(Dimming)) Pin number Name I/O Descriptions 1 VDD I Power（+3.3V） 2 B-DRIVE O Blue LED PWM control signal 3 G-DRIVE O Green LED PWM control signal 4 GND. I Ground 5 Nc. 6 Nc. 7 Nc. 8 Nc 9 R-DRIVE O Red LED PWM control signal FAC_RESE Factory reset button,press 5 seconds can reset to 10 T factory setting. Active low. 11 Nc 12 IR_IN Infrared remote control signal 13 GND. Ground 14 RESETn I System RESET signal,active low 15 DC I DEBUG port 16 DD I/O DEBUG port 17 VDD I Power（+3.3V） 12

3.2.3 Curtain Module Use FZB5610 ZigBee module as curtain module,the pin attributes as shown as table 3-3. Table 3-3 Pin attribute of ZigBee HA Smart Curtain Module(Corresponding Type:FZB5610-CUR01-HA) Pin Number Name I/O Descriptions 1 VDD I Power（+3.3V） 2 L-DRIVE O Control signal-Left 3 R-DRIVE O Control signal-Right 4 GND. I Ground 5 TSET I Test button signal,active low 6 R I Button signal,active low 7 STOP I Button signal-stop,active low 8 L I Button signal-right,active low. 9 Nc. Factory reset button,press 5 seconds can reset to 10 FAC_RESET I factory setting. Active low. 11 Nc. Operating Status Indicator,it can connect to LED.H ： ON,L:OFF;If LED keeps on,the model is not in the ZigBee Network;If LED is off,the model is in the ZigBee 12 Status O Network.In this case,each time the model sends a ZigBee data,LED flashes one time.When exiting the network,LED flashes quickly.It will not flash until LED keeps on,that means logout succeed 13 GND. Ground 14 RESETn I System RESET signal,active low. 15 DC I DEBUG port 16 DD I/O DEBUG port 17 VDD I Power（+3.3V） 3.2.4 Light Sensor Module Use FZB5610 ZigBee module as Light Sensor module,the pin attributes as shown as table 3-4. Table 3-4 Pin attributes of ZigBee HA Light Sensor Module(Corresponding Type :FZB5610-LGT01-HA) 13

Pin Number Name I/O Description 1 VDD I Power Input（+3.3V） 2 SCL O Light Sensor reads SCL signal of bus clock 3 DO O Relay control signal 4 GND. I Ground 5 Nc. 6 DCT I Relay control feedback 7 Nc Operating Status Indicator,it can connect to LED.H： ON,L:OFF;If LED keeps on,the model is not in the ZigBee Network;If LED is off,the model is in the ZigBee Network.In this case,each time the 8 Status O model sends a ZigBee data,LED flashes one time.When exiting the network,LED flashes quickly.It will not flash until LED keeps on,that means logout succeed. 9 Nc. FAC_RES Factory reset button,press 5 seconds can reset to 10 I ET factory setting. Active low. 11 SDA O Light Sensor reads signal SDA of data bus 12 Nc. 13 GND. Ground 14 RESETn I System reset signal,active low 15 DC I DEBUG port,leave unconnected. 16 DD I/O DEBUG port,leave unconnected. 17 VDD I Power（+3.3V） 3.2.5 Infrared Human Body Sensor Module Use FZB5610 ZigBee module as Infrared Human Body Sensor module,the pin attributes as shown as table 3-5. Table 3-5 Pin attributes of ZigBee HA Infrared Human Body Sensor Module(Corresponding Type:FZB5610-BOT01-HA) Pin number Name I/O Description 1 VDD I Power（+3.3V） Infrared Human Body Sensor,active high,H: 2 DIN I Someone,L:No one.When designing,should configure pull-down resistor. 3 NC. O Output ,active low 14

Pin number Name I/O Description 4 GND. Ground 5 Nc. O Output ,active low 6 Nc. O Output ,active low 7 Nc O Output ,active low Operating Status Indicator,it can connect to LED.H ： ON,L:OFF;If LED keeps on,the model is not in the ZigBee Network;If LED is off,the model is in the ZigBee 8 Status O Network.In this case,each time the model sends a ZigBee data,LED flashes one time.When exiting the network,LED flashes quickly.It will not flash until LED keeps on,that means logout succeed. 9 Nc. O Output ,active low Factory reset button,press 5 seconds can reset to FAC_RESE 10 I factory setting. Active low.When designing,should T configure pull-down resistor. 11 Nc. Output ,active low 12 Nc. Output ,active low 13 GND. Ground 14 RESETn System RESET signal,active low 15 DC I DEBUG port,leave unconnected 16 DD I/O DEBUG port,leave unconnected 17 VDD Power（+3.3V） 3.2.6 Switch Module Use FZB5610 ZigBee module as Switch module,the pin attributes as shown as table 3-6. Table 3-6 Pin attributes of ZigBee HA Smart Switch Module(Corresponding Type : FZB5610-SC H01-HA) Pin Number Name I/O Description 1 VDD I Power（+3.3V） 2 DIN1 I 1# Switch input signal 3 DIN2 I 2# Switch input signal 4 GND. I Ground 5 DIN1_LED O 6 DIN2_LED O 7 DIN3_LED O DEMO Board leave unconnected. 8 Status O Operating Status Indicator,it can connect to LED.H： 15

Pin Number Name I/O Description ON,L:OFF;If LED keeps on,the model is not in the ZigBee Network;If LED is off,the model is in the ZigBee Network.In this case,each time the model sends a ZigBee data,LED flashes one time.When exiting the network,LED flashes quickly.It will not flash until LED keeps on,that means logout succeed. 9 DIN4_LED O DEMO Board leave unconnected Factory reset button,press 5 seconds can reset to 10 FAC_RESET I factory setting. Active low. DIN3 I 3# Switch input signal,DEMO Board leave 11 unconnected 4# Switch input signal,DEMO Board leave 12 DIN4 I unconnected 13 GND. Ground 14 RESETn I System RESET signal,active low. 15 DC I DEBUG port,leave unconnected 16 DD I/O DEBUG port,leave unconnected 17 VDD I Power（+3.3V） 3.2.7 Smart Plug Module Use FZB5610 ZigBee module as Smart Plug module,the pin attributes as shown as table 3-7. Table 3-7 Pin attributes of ZigBee HA socket control module(Corresponding Type : FZB5610-SKT01-HA) Pin Number Name I/O Description 1 VDD I Power（+3.3V） 2 DIN1 I 1# switch signal input 3 DIN2 I 2# switch signal input 4 GND. I Ground 5 DO1. O Relay control signal 1 6 DO2. O Relay control signal 2 7 DO3 O Relay control signal 3 Operating Status Indicator,it can connect to 8 Status O LED.H： ON,L:OFF;If LED keeps on,the model is 16

Pin Number Name I/O Description not in the ZigBee Network;If LED is off,the model is in the ZigBee Network.In this case,each time the model sends a ZigBee data,LED flashes one time.When exiting the network,LED flashes quickly.It will not flash until LED keeps on,that means logout succeed. 9 DO4. O Relay control signal 4 FAC_RES Factory reset button,press 5 seconds can reset to 10 I ET factory setting. Active low. 11 DIN3 I 3# Switch signal input 12 DIN4 I 4# Switch signal input 13 GND. Ground 14 RESETn I System RESET signal,active low 15 DC I DEBUG port,leave unconnected 16 DD I/O DEBUG port,leave unconnected 17 VDD I Power（+3.3V） 3.2.8 Temperature and Humanity Sensor Module Use FZB5610 ZigBee module as Temperature and Humanity Sensor module,the pin attributes as shown as table 3-8. Table 3-8 Pin attributes of ZigBee HA Temperature and Humanity Sensor Module(Corresponding Type:FZB5610-THM02-HA) Pin number Name I/O Description 1 VDD I Power（+3.3V） FAC_RES Factory reset button,press 5 seconds can reset to 2 I ET factory setting. Active low. 3 Nc. 4 GND. I Ground. 5 Nc. 6 Nc. 7 Nc. Operating Status Indicator,it can connect to LED.H： ON,L:OFF;If LED keeps on,the model is 8 Status O not in the ZigBee Network;If LED is off,the model is in the ZigBee Network.In this case,each time the 17

Pin number Name I/O Description model sends a ZigBee data,LED flashes one time.When exiting the network,LED flashes quickly.It will not flash until LED keeps on,that means logout succeed. 9 Tx I Serial port send Tx 10 Rx O Serial port receive Rx 11 Nc. 12 Nc. 13 GND. Ground 14 RESETn I System RESET signal,active low 15 DC I DEBUG port,leave unconnected 16 DD I/O DEBUG port,leave unconnected 17 VDD I Power（+3.3V） 4 Reference Information 4.1 Electrical Schematic Diagram The electrical schematic diagram of FZB5610 ZigBee module,which refers to FZB5610 schematic diagram.pdf. 4.2 Design Considerations ◆ The area below the antenna is unoccupied. ◆ The power of the module had better use 5V regulated power ,use a LDO that is suitable for RF application to supply power. ◆ Had better use double-sided board to design. ◆ IO port leave unconnected. ◆ The width of LED drive’s layout is according to the actual current selection. ◆ The default state of output IO port is high-level,suggesting the users to add 1.2KΩ to pull-down resistor. ◆ RESET time is more than 200ms.See figure 4-1. 18

Figure 4-1 Reset time more than 200ms 5 IEEE 802.15.4 The IEEE 802.15.4 standard provides a worldwide standard for Personal Area Networks and short distance wireless networks for low data rate solutions with long battery life and low complexity.The standard defines a Physical layer(PHY) and a Medium Access Control layer(MAC).There are two active versions of the standard:IEEE 802.15.4-2003 and IEEE 802.15.4-2006 where the 2003 version is the basis for the ZigBee protocol.The typical applications are meter reading,home and building automation,industrial control and monitoring systems,wireless sensor networks,remote controls and consumer electronics. The module complies with the IEEE 802.15.4 standard operating in the 2.45GHz band.It uses direct sequence spread spectrum(DSSS) with 2 Mc/s chip rate giving a raw data rate of 250kbit/s.16 channels are available in the 2.45GHz band named channel 11-26(channels 0-10 are reserved for use in the 868 and 915 MHz bands). For more information on the standard,please consult www.ieee802.org/15/pub/TG4.html. 6 The ZigBee Protocol The ZigBee Alliance is an association of companies working together to enable reliable,cost-effective,low-power,wirelessly networked,monitoring and control products based on an open global standard.The ZigBee Alliance is a rapidly growing,non-profit industry consortium of leading semiconductor manufactures,technology providers,OEMs and end-users worldwide Membership is open to all.The ZigBee Alliance,in collaboration with the IEEE is defining the network,security,and application layers above the IEEE 19

802.15.4 PHY and MAC layers.This cooperation has resulted in an easy-to-use,industry standard wireless network platform optimised for wireless monitoring and control applications. The ZigBee standard defines a Network Layer and an Application Layer on top of IEEE.802.15.4.The network layer includes routing,security etc.While the application layer defines binding and other support for application. The applications are specified in profiles to ensure multi-vendor interoperability.Current public profile includes: -Smart Energy-SE(Profile for Smart Meter reading) -Building Automation-CBA -Home Automation-HA -Health Care-HC -Telecom Services-TA - Remote Control - RF4CE Manufacturer specific profiles can also be made. The current version of the ZigBee standard is 2007.The standard defines two different stack feature sets: - ZigBee Feature set - ZigBee PRO feature set In order to sell a product containing ZigBee technology, the seller must be a member (adaptor or higher) of the ZigBee alliance. For more information about the ZigBee Alliance and the ZigBee standard, please consult www.zigbee.org. 7 Mechanical Drawings And Installation The mechanical drawings and installation as shown as below. 20

Figure 7-1 Mechanical drawing and installation Figure 7-2 Installation 1 Figure 7-3 Installation 2 Figure 7-4 Installation 3 21

FCC compliance This device complies with Part 15 of the FCC Rules. Part Number FCC ID FZB5610 2AE8BFZB561011A Operation is subject to the following two conditions: (1)this device may not cause harmful interface,and (2)this device must accept any interface received,including interface that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. The modules have been approved with the following external chip antenna. Manufacturer Part Number WinWave Electronic Co., Ltd. WAN8010F245M05 Warning for FZB5610:This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. The final end product must be labeled in a visible area with the following:Contains FCC ID: 2AE8BFZB561011A. This module shall be integrated to the end product with a stable 3.3VDC power to this module through regulator circuit. The OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emission, PC peripheral requirements, etc.). 22

COPYRIGHT STATEMENT The copyright of the manual is belonged to Shenzhen Feibit Electronic Technology Co.,Ltd(simply “Feibit Technology”for short),and reserves all rights.Without the written consent of Feibit Technology,any company or individual can’t copy the part or the whole content of the manual. DISCLAIMER Because of the version upgrading and other reasons,the content of the manual will update irregular.Unless with the other appointment,the manual will be only used as the user’s guide,and all the statement,information and suggestion will not constitute any guarantee. TRADEMARK STATEMENT is used as the trademark of Shenzhen Feibit Electronic Technology Co.,Ltd.All other trademarks and registered trademarks are property of their respective owners. Contact us Shenzhen Feibit Electric Technology CO.,Ltd Address ： Room 505, Building A1, Lilang Software Park, No 31. Bulan Road, Nanwan Street, Longgang District, Shenzhen, China Tel：0755-36515299 Fax：0755-83159815 E-mail：sales@feibit.com Website：www.feibit.com 23


Document Created: 2015-09-15 09:45:20
Document Modified: 2015-09-15 09:45:20
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC