User manual

FCC ID: 2ADXCD01IN

Users Manual

Download: PDF
FCCID_4046452

EZfFUn® 7. Bind Setting 8. FAQ Bind smart phone to the indoorunit using APP, follow steps 1,2,3 2. Select "next" option, enter your Wi—Fi password to connect to the internet When binding is completed, you will hear the doorbell sound from the indoor Question 1: When I press the doorbell, there is no doorbell sound. Smart Doorbell (picture 7.3), then select *complete seitings" (picture 7.4) unit, then the doorbell is ready to use (picture 7.5). When a visitor presses 1. Select *Bind" Option{picture 7.1), then press the indoor unit Wi—Fi the doorbell button, the APP will receive a snapshot (picture 7.6). If the APP Answer: Quick Start Guide binding button(picture 7.2) , the indoor unit binding light will flash. Check the battery to see if it‘s installed properly, also check the battery life. send an error message {picture 7.7) when you bind smart phone to indoor unit, please follow step 2 and 3 to bind again. Check the indoorunit and the outdoorunit to see if they are paired correcily. Please follow step 1 then stap 2. Do not press the indoor unit and outdoor unit at the sametime. Coo Ereto Step 1: Indoor Unit Setting . Use tool such as push pin to push the button on the left side of the indoor unit , the indoor/outdoor unit pairing light will blink , now go to step 2. @ Bincing eror Step 2: Outdoor Unit Setting V it Binding Success! o Please wat for a whie! Press the doorbell button for more than 3 seconds , the outdoor unit will send A 1t takes about 60 seconds. signal to the indoor unit. When you hear doorbell sound from the indoor unit, m es Cacs oc the indoor unit and outdoor unit are paired correctly. PCs Thanks for buying EZFUN smart doorbell ! neees Questlon 2: APP cannot connect to indoor unit Answer: Check the Wi—Fi connection and your password. Picture 7.1 Picture 7.2 Picture 7.3 Picture 7.4 Picture 7.5 Picture 7.6 Picture 7.7 Please connect to 2.4G Wi—Fi. Welcome to EZFUN family !

1. Outdoor Unit 3. Specification 4. Battery Installation 5. Installation for Outdoor Unit 6. Download Smart Doorbell DO1 (Android or iOS) Installation of the Doorbell Installation of the Doorbell Outdoor Unit O <==—]——=——~—Gamere Image Sensor 2.0MP 1/4 Inch CMOS Transmission Mode RF2.4GHz Light <=——Jsh——dl f====~= Doorbell Button Power Supply AAA Battery x 2 Speaker —————||—— §XE Speaker Buzzer Installation 3M Glue or Screw Fix = Size 87 x 58 x 15mm(3.43" x 2,28" x 0.59") 2. Indoor Unit Weight 80g(0.18 tb) Indoor Unit Wi—Hi Binding Button Transmission Mode RF2.4GHz+ Wifl2.4GHz bo u2222022 Wi—Fi Binding i Light Power Supply 100—240V AC "TSos—mrese [( ut Remove the 3M release Stick it to the door or wall firmly. Speaker Dingdong Sound paperfrom the back of the Please make sure the surface of : Unit Paring ower Light Button Size 56.8 x 36.3 x 6Bmm (2.24" x 1.43" x 2.68") outdoor Unit. the door or wall that the doorbell Way 1:Scan the QR—code and download the APP. Push up the shell(as instructed by After the batteries are installed, sticks to is clean and smooth. Way 2:Search Smart Doorbell D01 in App Store or Google play,and Welght 359 (0.08 lb the picture above).removeit.And pull dawn the shell to lock itup(as download the APP. ------ Speaker install the batteries(The product instructed by the picture above). Way 3:Visitthe URL: http://www.ezfun.mobi/doorbell/Index/download/ APP Support daes not contain batterles}. * The outdoor unit should be installed at the same height of your face. You can install the outdoorunit using scrow instead of 3M sticker. by your smartphone , and download the APP.

FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.


Document Created: 2018-06-11 17:49:34
Document Modified: 2018-06-11 17:49:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC