User Manual

FCC ID: 2ADCN-GTY110

Users Manual

Download: PDF
FCCID_3873731

ECOFIT Gateway
Model: GTY110
Rev: 1.0




                   Gateway
                   001-256-55801

                   ECOFIT Networks Inc




                Warranty and Quick Start Guide


Contents




           Contents.............................................................................................. 1

           Networking Considerations ......................................................... 2

           Gateway Installation........................................................................ 3

           Gateway Mounting........................................................................... 4

           User Notice ....................................................................................... 6

           Warranty Statement ........................................................................ 7

           Certification Information................................................................. 8


Network Considerations



DHCP

The ECOFIT Gateway is designed to connect over a DHCP connection.
If the facility implements network security, supply the following information to their IT personnel:



 UPDATE CHANNEL                        HTTPS Port 443, MAC Authorized, Outgoing

 RESTART CHANNEL                       TCP Port 8001, Outgoing

 SESSION SUBMIT CHANNEL                HTTPS Port 443, REST, Basic Authorization, Outgoing




STATIC IP
If required, a static IP address can be set on the Gateway.
This is done by logging into the Gateway and manually setting the IP address in the Network Settings.

Full step by step instructions can be found on the ECOFIT Help Center.


Gateway Installation


The Gateway package contains the following:
1 - Gateway PC                  1 - Gateway Power Supply
1 - Gateway Wall Mounting Kit   1 - Power Cord
1 - Ethernet Cable              2 - Antennas



   1. Connect both antennas to Gateway.                                2. Connect active ethernet port.


                      k
              ay - Bac
        Gatew                                                                             k
                                                                                ay - Bac
                                                                           Gatew




   3. Connect to power supply to active                              4. Gateway will automatically power up.
   outlet.

                                                                                           nt
                 k                                                                 ay - Fro
         ay - Bac                                                          Gatew
    Gatew


                                                                                                F8T
                                                                                       02-004-8




                             Visit the ECOFIT Help Center for configuration information.


Gateway Mounting


To Wall Mount the System:




             1. Locate the 2 screw holes              2. Place the mounting panel on
             reserved for mounting on the             the Gateway. Fasten compatible
             bottom of the Gateway PC                 screws to secure the Gateway.




                               3. Screw the mounting pad to the
                               wall using the above marked screw
                               holes. Ensure the screws are fixed
                               securely to the wall.


Gateway Mounting


To VESA Mount the System:




           1. Locate the 2 screw holes     2. Place the mounting panel on
           reserved for mounting on the    the Gateway. Fasten compatible
           bottom of the Gateway PC        screws to secure the Gateway.




          3. Remove the reserved screws   4. Screw the mounting pad to the
          for VESA mount on the back      back of the monitor/TV. Ensure the
          cover on the monitor/TV.        screws are fixed securely.


User Notice


        Environmental Safety Instruction
        Avoid dust, humidity and temperature extremes.

        Do not place the product in any area where it may become wet.

        0-40 Centigrade is the optimal operating temperature.




COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT
MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE
MANUFACTURER.

THIS MANUAL CONTAINS BASIC INFORMATION REQUIRED TO INSTALL THE GATEWAY PRODUCT. WE ASSURE THAT THIS MANUAL MEETS THE USER’S
REQUIREMENT BUT MAY BE CHANGED OR CORRECTED AT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT A
WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF DATA, INTERRUPTION OF BUSINESS ETC.).

PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE
COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGE.




Manual Revision Information
   Revision           Revision History                     Date
       1.0               First Edition               August 8, 2016


Warranty Statement

Reputable Warranty
ECOFIT strives to provide the highest quality products to our customers. In keeping with that goal, we provide the most dependable warranty in the industry,
where all of our products are backed by a 3-year limited warranty from the date of manufacture.
All warranties are handled directly through ECOFIT Networks. End users must contact ECOFIT directly to obtain warranty. To determine if a product is within the
3-year limited warranty, contact support@myecofit.com.

3 Year Limited Warranty
Limited Warranty The liability of ECOFIT under this warranty is limited. The Purchaser, by taking receipt of any ECOFIT product (“Product”), acknowledges the
terms of the Limited Warranty in effect at the time of such Product sale and acknowledges that it has read and understands same.

The ECOFIT Limited Warranty to the Purchaser on the Products sold hereunder is a manufacturer’s pass-through warranty which the Purchaser is authorized to
pass through to its customers. Under the Limited Warranty, each ECOFIT Product is warranted against defects in workmanship and materials if the Product is
installed and used in compliance with ECOFIT’s instructions, ordinary wear and tear accepted. The pass-through warranty period is for a period of thirty-six (36)
months from the date of purchase if the Product is not installed during that period, or twelve (12) months from the documented date of installation if installed
within twenty-four (24) months from the original purchase date.

The liability of ECOFIT under the Limited Warranty shall be limited to, at ECOFIT’s sole discretion: the cost of parts and labor provided by ECOFIT to repair
defects in materials and / or workmanship of the defective product; or to the exchange of the defective product for a warranty replacement product; or to the
granting of credit limited to the original cost of the defective product, and such repair, exchange or credit shall be the sole remedy available from ECOFIT, and,
without limiting the foregoing in any way, ECOFIT is not responsible, in contract, tort or strict product liability, for any other losses, costs, expenses,
inconveniences, or damages, whether direct, indirect, special, secondary, incidental or consequential, arising from ownership or use of the product, or from
defects in workmanship or materials, including any liability for fundamental breach of contract.

The pass-through Limited Warranty applies only to those defective Products returned to ECOFIT during the warranty period. This Limited Warranty does not cover
the cost of the parts or labor to remove or transport the defective Product nor does it cover the cost to transport and reinstall the repaired or replacement
Product, all such costs and expenses being subject to Purchaser’s agreement and warranty with its customers.

Any representations or warranties about the Products made by Purchaser to its customers which are different from or in excess of the ECOFIT Limited Warranty
are the Purchaser’s sole responsibility and obligation. Purchaser shall indemnify and hold ECOFIT harmless from and against any and all claims, liabilities and
damages of any kind or nature which arise out of or are related to any such representations or warranties by Purchaser to its customers.

The pass-through Limited Warranty does not apply if the returned Product has been damaged by negligence by persons other than ECOFIT, accident, fire, Act of
God, abuse or misuse; or has been damaged by modifications, alterations or attachments made subsequent to purchase which have not been authorized by
ECOFIT; or if the Product was not installed in compliance with ECOFIT’s instructions; or if due to defective installation of the Product; or if the Product was not
used in compliance with ECOFIT’s instructions.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WHICH THE GOVERNING LAW ALLOWS PARTIES TO CONTRACTUALLY
EXCLUDE, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, DURABILITY
OR DESCRIPTION OF THE PRODUCT, ITS NON-INFRINGEMENT OF ANY RELEVANT PATENTS OR TRADEMARKS, AND ITS COMPLIANCE WITH OR
NON-VIOLATION OF ANY APPLICABLE ENVIRONMENTAL, HEALTH OR SAFETY LEGISLATION; THE TERM OF ANY OTHER WARRANTY NOT HEREBY
CONTRACTUALLY EXCLUDED IS LIMITED SUCH THAT IT SHALL NOT EXTEND BEYOND TWENTY-FOUR (24) MONTHS FROM THE PRODUCTION DATE, TO
THE EXTENT THAT SUCH LIMITATION IS ALLOWED BY THE GOVERNING LAW.

Product Warranty Return Procedure All Products that are believed to have defects in workmanship or materials must be returned, together with a written
description of the defect and a Return to Manufacturer Number (RMA) to ECOFIT. An RMA can be obtained by contacting support@myecofit.com


Check out our online Help Center for more information.
myecofit.zendesk.com
EM - support@myecofit.com
TF - 1.855.380.0123




FCC ID: 2ADCN-GTY110
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Canada, Industry Canada (IC)
IC: 12408A-GTY110
CAN ICES-3 (B)/NMB-3(B)
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
This device complies with Industry Canada license-exempt RSS standard(s).
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.

The minimum distance where the maximum permissible exposure limit is reached is 3.01 cm from the GTY110 with the 1.3dBi
antenna.
It is recommended that the unit is positioned so that the typical distance from the antenna to the end user is 20cm or
greater.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.



Do not dispose of this electronic device into the trash.
To minimize pollution and ensure environmental protection, please recycle.



Document Created: 2017-05-19 14:31:45
Document Modified: 2017-05-19 14:31:45

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC